0EC_PCA_3 does not return data in RSA3 if the target system is entered

Hello all,
Datasource 0EC_PCA_3 is not transferring data to the BW 7.0 system. In the ECC 6.0 system datasource 0EC_PCA_3 does not return data in RSA3 if the target system (BWDCLNT100) is entered in the selection fields. When omitting the target system all expected data is returned.
Datasource 0EC_PCA_1 works fine for the same target system.
There is one thread dealing with the same problem but the person does not provide the solution he found.
Does anyone know what the issue is?
Regards and thanks,
József.

The problem was solved by removing the datasource in both BW and R/3 and activating everything from scratch again. We didn't find out what was the cause of the problem, but at least it is working now.

Similar Messages

Function Module - E_T_DATA does not return data

Hi
I am trying to create a fuction module Generic extraction, the code belwo dosen't return any data.
when i debug YBW_MAT_STAT does have but after E_T_DATA = YBW_MAT_STAT it dose not return any data
can you help?
Ramesh
FUNCTION YBW_FM_ACTIVE_MATERIAL.
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE YBW_MAT_STAT OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
Example: DataSource for table SFLIGHT
TABLES: YBW_MAT_STAT.
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
   DATA : YBW_MAT_STAT type YBW_MAT_STAT occurs 0 with header line.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
counter
          S_COUNTER_DATAPAKID LIKE SY-TABIX,
cursor
          S_CURSOR TYPE CURSOR.
Select ranges
Comment copy code
RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
         L_R_CONNID FOR SFLIGHT-CONNID.
DATA: begin of t_marc occurs 0,
ZMATNR type MATNR,
ZWERKS type WERKS,
end of t_marc.
DATA: begin of t_ytmd_mat_ref occurs 0,
ZMATNR type MATNR,
ZYNA_MATNR_ST type YNA_MATNR_ST,
ZYEAME_MATNR_ST type YEAME_MATNR_ST,
ZYFIN_MATNR_ST type YFIN_MATNR_ST,
end of t_ytmd_mat_ref.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
    CASE I_DSOURCE.
      WHEN 'ZAINV_MAT_STATUS'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
        LOG_WRITE 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  I_DSOURCE   "message variable 1
                  ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE = I_DSOURCE.
    S_S_IF-MAXSIZE   = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
    APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
      SELECT MATNR WERKS FROM MARC into table t_marc where MATNR BETWEEN '4233940M1' and '4233950M1'.
      loop at t_marc.
        SELECT MATNR YNA_MATNR_ST YEAME_MATNR_ST FROM YTMD_MAT_REF into table t_ytmd_mat_ref where MATNR = t_marc-zmatnr.
          loop at t_ytmd_mat_ref.
            if t_marc-zwerks = 'GB71' AND t_ytmd_mat_ref-ZYEAME_MATNR_ST = 'A'.
              read table t_ytmd_mat_ref with key zmatnr = t_marc-zmatnr.
              YBW_MAT_STAT-matnr = t_marc-zmatnr.
              YBW_MAT_STAT-plant = t_marc-zwerks.
            append YBW_MAT_STAT.
            clear YBW_MAT_STAT.
            endif.
           endloop.
      endloop.
    ENDIF.                             "First data package ?
     clear E_T_DATA.
     refresh E_T_DATA.
     E_T_DATA = YBW_MAT_STAT.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.

Hi
I have a question,
With the above code i have all my records (450000+) in a single data package.
how do i break this in multiple data packages
regards
Ramesh

SQL Developer bug? It does not return DATEs if database is only MOUNTED

I'm logging into a mounted database as SYS to check on things using the V$ views, but any query I do involving DATEs never returns any data. If I remove the DATE column, the query works fine. If the database is OPEN, the query works fine with the DATEs. This is a bit of a problem when I want to check on standby databases for example. Is this the way it's supposed to work?
Help!

The original thread appeared to have gone nowhere, so I raised the issue again. If I have violated forum rules, please forgive me.
I have a choice of using either TOAD or SQL Developer at the site that I have just started at, and I have not used either much. I was leaning towards SQL Developer as its price to functionality ratio is very attractive. However, this issue of not working with a mounted database is a show stopper for me for SQL Developer as I prefer to use a single tool that handles all of the DBA work that I do. So far, TOAD does, and SQL Developer does not.

Webservice call does not return data

i have created a stateless EJB and generated webservice from it. the method in ejb just gets data from database table with multiple rows. return type of the method is PlantBean[]. when i invoke this webservice from test console or Webdynpro app it returns Empty objects. it returns exact number of objects as query returns.
at test console it just a list of these objects with no data in it. like
(test.types.PlantBean)
(test.types.PlantBean)
(test.types.PlantBean)
Any help?
thx in adv.
krishna

Hi Krishna,
Can you please send your peace of code, how your accessing that service? Coz, in navigator it showing all the objects.
Are you sure that, you are setting values to Return Class Objects?
Regards,
Sridhar

Automator - Run Shell Script - Does not return when script launches firefox

Automator does not work the same on my MacBooks as my Mac mini! Both are latest Snow Leopard. I'm trying to automatically setup my MacBook after it decides if I'm at work, or elsewhere.
The Automator Action "Run Shell Script" (Shell: /usr/bin/perl) does NOT return control when attempting to launch Firefox:
system("/Application/Firefix.app/Contents/MacOS/firefox-bin -private news.google.com &");
Note: the ampersand should cause Firefox to start as a background process.
It only returns control after I close Firefox. I have a "Show Growl Notification" as the second action, so I know that the first action has not completed. Odd thing is that this works on my Mac mini. I also noticed that another difference: on my MacBook status is displayed in the top toolbar when the Automator application is running.
Any ideas?

Thanks, it worked. I forgot about stderr and stdin.
I'm using Perl as it is part of a bigger script. I can quickly and easily figure out if I am at work where my MacBook is plugged into a network:
my $ethernet = qx(ifconfig en0) =~ m{status:.active}xms;
if ($ethernet) {
# setup stuff for work environment
} else {
# setup stuff for mobile environment
}

Very Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

Fetching Form Data... does not return form's field list to edit

I have a Portal Form based on a view. It works fine if I run it.
Suddenly I am unable to edit the form field properties:
1) In the application list, I do not get run option for the form.
2) If I go to manage and edit, "Fetching Form Data..." does not return the list of fields, so I am unable to change field properties.
3) I can still run the form.
Please help, I need to fix this within hours.
Thanks in advance.

I think I know what causes the error. Whenever I use HTML tags inside the Display Options/label text box I get this error.
I have tried <p align="right">xyz</p> and <h4 align="right">xyz</h4>. In both cases I can run the form the first time and the label appears right justified, but when you try to edit the form, bottom left shows "error on page" and field data does not show up.
To fix this I had to go to the version before I added the HTML tags to the label.
Thank you for your help.

Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Thanks
SAP BW

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

WebI does not return failed when scheduling a report which only holds parti

WebI does not return failed when scheduling a report which only holds partial results.
We have scheduled reports which take some time to run. When they are scheduled they sometimes show successful even though the report only holds partial results. The only indication is when you open the report as webi report you see the warning that it holds partial results.
When running the report manually, it works file.
The issue is not in the no of rows in the universe settings because we this unselected. The issue is that it times out.
The reason that it times out is that a lot of resources are used for loading and processing data when the report is scheduled. When running it manually, it works because at this time the serverload is less. the time in the universe is set to 10 min.
The version we have is BOXIR2-SP4.
Ok. Issue identified.
The question is - why is the report successful when it holds partial results? If this is normal behavior, noone can really trust the scheduled reports, especially when you save it to excel and send it by mail.
Is there a solution for this except increasing the allowed query time which would not solve the issu but only allow more reports to complete?
Edited by: Karlgren Michael on Sep 17, 2009 1:22 PM

Hi ,
Currently this problem exists in XI R2. This feature will be part of thenext Service Pack i.e XI R2 SP6.
This CER will be delivered from IDC Webi and BIP Platform as part of Jupiter Sp6.
Problem Statement:
Scheduled WebI Reports which are partially refreshed are distributed to the destinations for Users to View and make decisions. These users arenu2019t usually aware that these reports have u201CPARTIAL RESULTSu201D
Recomended Solution:
Allow the Schedule Creator / Modifier to set a parameter to stop the distribution of the u201CPARTIALLY REFRESHEDu201D WebI report.
Thanks
Salini

FM HRTRV_IF_GET_TRIP does not return USERDATA

Hi, it's me, yet again...
I'm using the FM "HRTRV_IF_GET_TRIP" in FITE_VC_GENERA_DATA in a post exit of comp-controller method "ON_SHOW" to get the structure/Table USER/PTK99 from the TE Cluster for binding to the context afterwards. At least that's the plan. The FM does not return me the data I expect in parameter USERDATA, although there is data in the TE Cluster and within the FM, I can see the global Table USER being filled whilst the macro RP-IMP-C1-TE. But this data is not further process neither is seems the strucutre USERDATA to be touched at any point of the FM. Am I calling the FM 'wrong' in any way? I'm close to making an implicit enhancement at the end and forcefully fill userdata from user....
Too long, didn't read: USERDATA is not returned filled --> WHY?
CALL FUNCTION 'HRTRV_IF_GET_TRIP'
EXPORTING
    employeenumber             = wd_assist->GS_COMMON_RFC_INPUT-employee_number
    tripnumber                 = lv_tripno
*   LANGUAGE                   = SY-LANGU
*   CALCULATE_AMOUNTS          = 'X'
*   GET_TRIP_FROM_MEMORY       = ' '
IMPORTING
*   FRAMEDATA                  =
*   STATUS                     =
    USERDATA                   = ls_user " should contain cluster values, but it doesn't
tables
*   RECEIPTS                   =
*   ADDINFO                    =
*   GUESTS                     =
*   TEXT                       =
*   MILEAGE                    =
*   STOPOVER                   =
*   DEDUCTIONS                 =
*   COSTDIST_TRIP              =
*   COSTDIST_STOP              =
*   COSTDIST_RECE              =
*   COSTDIST_MILE              =
*   AMOUNTS                    =
*   ADVANCES                   =
    return                     = lt_bapiret " says method was executed successful
In the insides of the FM:
* IF CALCULATE_AMOUNTS <> 'X'. "XJY
* import the trip because it was NOT imported before
READ TABLE T_PERIO INDEX 1.
TE-KEY-PERNR = T_PERIO-PERNR.
TE-KEY-REINR = T_PERIO-REINR.
TE-KEY-PERIO = T_PERIO-PERIO.
TE-KEY-PDVRS = T_PERIO-PDVRS. " Once this line is executed, the global table USER is fileld with the data I expect
RP-IMP-C1-TE.
* ENDIF. "XJY
if t_perio-abrec = '0' or
     t_perio-abrec = '1'.
    clear te-key-pdvrs.
    import beler from memory id te-key.
endif.
I hope somebody has ever used this one and can tell me what I'm doing wrong...
Cheers, Lukas

good to know. that you have already implemented similar thing. In our case if employee want to pick a manager he will only be given option from a custom table entries.
They way i was thinking was that there will be a checkbox that will say "Override Approver"
and when that will be checked text filed will be enabled with search help restricted to custom table entries.
I have one question. When I am enhancing FITE_VC_REVIEW and adding field in that view, I m finding it hard to track it. Looks like adding to General data screen will be much easier.
R u using ABAP memory to track field and use it at SMOD or you are using SAP memory ?
I am just starting on this one and not expert at webdynpros.. will ping you if i need any more help
and yes i just added following like in FM HRTRV_IF_GET_TRIP
read TABLE user INTO userdata INDEX 1
to get it to load userdata..

My Mini Ipad Does not return to the Home screen after I press the Home button

My Mini Ipad Does not return to the Home screen after I press the Home button. I have also tried to turn it off and it is not responding.

Check the following:
1. Check credit card number
2. Check security code
3. Billing Address must be the same as credit card
4. Check expiry date
5. Make sure you have sufficient fund

Page does not show data

Hi all,
I would appreciate any help for the following problem that I am facing.
I have created master-detail pages sharing the same AM.
The details page shows details of the request from 3 different VOs.
The VOs are entity-based and I modify the VOs using the setwhereclause for my purpose.
The master page runs fine and shows the searched request but when I goto the details page, it renders correctly but does not show any data.
Thanks in advance.

Hi,
Thanks for the reply.
The view instance and view attribute to the details page columns are already set.
To add to the information,the AM is also used by othe pages for logic calcuation.
After executing these pages for one of the request, when I use ther master detail page for ther same request, it works.
But for the other requests, the details page does not return any data.
I suppose this is linked with EO not getting updated/refreshed with the new search request in the master details page.
If this is supposedly the reason,then how can I refresh the EO for each master detail search?
Has anybody encountered this issue before?
--Riyaz
Edited by: mriyaz on Mar 7, 2009 12:29 PM

Server does not return query metadata check the query

hi,
i want know how to use bex query designer,
when i insert a data provider,the message is appear "server does not return query metadata check the query",
who can help me ?
thanks a lot !
addition: my current entironment is: gui710 with sp4,bi710 with sp2.

Hi,
All the yellow and red lights will have an effect on query performance or execution. Read up on them as there are too many to explain via this forum.
There is a document on SDN on query performance. Some useful links:
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9f4a452b-0301-0010-8ca6-ef25a095834a]
[http://help.sap.com/saphelp_nw70/helpdata/en/41/b987eb1443534ba78a793f4beed9d5/frameset.htm]
[http://help.sap.com/saphelp_nw70/helpdata/en/d9/31363dc992752de10000000a114084/frameset.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/2e/caceae8dd08e48a63c2da60c8ffa5e/frameset.htm]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0501cb9-d51c-2a10-239c-c141a22c45a6]
Cheers...

Select query does not return rows

Hi all,
The following query does not returning rows even though values are there in table.
Kindly let me know why it is creating problem.
thanks, P Prakash
/* Formatted on 2011/05/11 16:44 (Formatter Plus v4.8.8) */
SELECT pr.pa_rqst_sid, ptr.sbmtr_trnsctn_idntfr, ptr.athrztn_infrmtn,
DECODE (ou.org_unit_name,
'PA - MDCH', (SELECT property_value
FROM hipaa_system_defaults
WHERE property_name = 'RECEIVER_ID_1_PA'),
'PA - MPRO', (SELECT property_value
FROM hipaa_system_defaults
WHERE property_name = 'RECEIVER_ID_2_PA'),
'PA - DEFAULT', (SELECT property_value
FROM hipaa_system_defaults
WHERE property_name = 'RECEIVER_ID_1_PA'),
NULL
) AS intrchng_sndr_idntfr,
ptr.intrchng_sndr_idntfr AS intrchng_rcvr_idntfr, ptr.usg_indctr,
ptr.intrchng_sndr_idntfr AS applctn_rcvr_code,
ptr.trnsctn_set_cntrl_nmbr AS trnsctn_set_cntrl_nmbr,
ptr.athrztn_infrmtn_qlfr AS athrztn_infrmtn_qlfr,
ptr.scrty_infrmtn_qlfr AS scrty_infrmtn_qlfr,
ptr.scrty_infrmtn AS scrty_infrmtn,
ptr.intrchng_sndr_idntfr_qlfr AS intrchng_sndr_idntfr_qlfr,
ptr.intrchng_rcvr_idntfr_qlfr AS intrchng_rcvr_idntfr_qlfr,
ptr.intrchng_cntrl_stndrds_idntfr AS intrchng_cntrl_stndrds_idntfr,
ptr.intrchng_cntrl_vrsn_nmbr AS intrchng_cntrl_vrsn_nmbr,
ptr.intrchng_cntrl_nmbr AS intrchng_cntrl_nmbr,
ptr.acknwldgmnt_rqstd_indctr AS acknwldgmnt_rqstd_indctr,
ptr.cmpnt_elmnt_sprtr AS cmpnt_elmnt_sprtr,
ptr.fnctnl_idntfr_code AS fnctnl_idntfr_code,
ptr.grp_cntrl_nmbr AS grp_cntrl_nmbr,
ptr.rspnsbl_agncy_code AS rspnsbl_agncy_code,
ptr.vrsn_rls_indstry_idntfr_code AS vrsn_rls_indstry_idntfr_code
FROM pa_request pr, pa_transaction_request ptr, org_unit ou
WHERE ptr.pa_trnsctn_rqst_sid = pr.pa_trnsctn_rqst_sid
AND pr.org_unit_sid = ou.org_unit_sid
AND pr.oprtnl_flag = 'A'
AND ptr.oprtnl_flag = 'A'
AND ou.oprtnl_flag = 'A'
AND pr.pa_mode_type_lkpcd = 'BT'
AND (pr.status_cid = 86 OR pr.status_cid IN
(20, 70, 30, 80, 25, 101, 96)
AND pr.pa_rqst_sid = 75006271
ORDER BY pr.pa_rqst_sid;
the query is not giving result for this particular request sid.75006271 is present in table.

833560 wrote:
Hi all,
The following query does not returning rows even though values are there in table.
Kindly let me know why it is creating problem.
thanks, P Prakash
/* Formatted on 2011/05/11 16:44 (Formatter Plus v4.8.8) */
SELECT pr.pa_rqst_sid, ptr.sbmtr_trnsctn_idntfr, ptr.athrztn_infrmtn,
DECODE (ou.org_unit_name,
'PA - MDCH', (SELECT property_value
FROM hipaa_system_defaults
WHERE property_name = 'RECEIVER_ID_1_PA'),
'PA - MPRO', (SELECT property_value
FROM hipaa_system_defaults
WHERE property_name = 'RECEIVER_ID_2_PA'),
'PA - DEFAULT', (SELECT property_value
FROM hipaa_system_defaults
WHERE property_name = 'RECEIVER_ID_1_PA'),
NULL
) AS intrchng_sndr_idntfr,
ptr.intrchng_sndr_idntfr AS intrchng_rcvr_idntfr, ptr.usg_indctr,
ptr.intrchng_sndr_idntfr AS applctn_rcvr_code,
ptr.trnsctn_set_cntrl_nmbr AS trnsctn_set_cntrl_nmbr,
ptr.athrztn_infrmtn_qlfr AS athrztn_infrmtn_qlfr,
ptr.scrty_infrmtn_qlfr AS scrty_infrmtn_qlfr,
ptr.scrty_infrmtn AS scrty_infrmtn,
ptr.intrchng_sndr_idntfr_qlfr AS intrchng_sndr_idntfr_qlfr,
ptr.intrchng_rcvr_idntfr_qlfr AS intrchng_rcvr_idntfr_qlfr,
ptr.intrchng_cntrl_stndrds_idntfr AS intrchng_cntrl_stndrds_idntfr,
ptr.intrchng_cntrl_vrsn_nmbr AS intrchng_cntrl_vrsn_nmbr,
ptr.intrchng_cntrl_nmbr AS intrchng_cntrl_nmbr,
ptr.acknwldgmnt_rqstd_indctr AS acknwldgmnt_rqstd_indctr,
ptr.cmpnt_elmnt_sprtr AS cmpnt_elmnt_sprtr,
ptr.fnctnl_idntfr_code AS fnctnl_idntfr_code,
ptr.grp_cntrl_nmbr AS grp_cntrl_nmbr,
ptr.rspnsbl_agncy_code AS rspnsbl_agncy_code,
ptr.vrsn_rls_indstry_idntfr_code AS vrsn_rls_indstry_idntfr_code
FROM pa_request pr, pa_transaction_request ptr, org_unit ou
WHERE ptr.pa_trnsctn_rqst_sid = pr.pa_trnsctn_rqst_sid
AND pr.org_unit_sid = ou.org_unit_sid
AND pr.oprtnl_flag = 'A'
AND ptr.oprtnl_flag = 'A'
AND ou.oprtnl_flag = 'A'
AND pr.pa_mode_type_lkpcd = 'BT'
AND (pr.status_cid = 86 OR pr.status_cid IN
(20, 70, 30, 80, 25, 101, 96)
AND pr.pa_rqst_sid = 75006271
ORDER BY pr.pa_rqst_sid;
Hi,
Its very difficult to analyse the query without any data being provided. So I suggest you to debug the above query by keeping basic join condition intact and comment out all the other where conditions for initial run.
FROM pa_request pr, pa_transaction_request ptr, org_unit ou
WHERE ptr.pa_trnsctn_rqst_sid = pr.pa_trnsctn_rqst_sid
--AND pr.org_unit_sid = ou.org_unit_sid
--AND pr.oprtnl_flag = 'A'
--AND ptr.oprtnl_flag = 'A'
--AND ou.oprtnl_flag = 'A'
--AND pr.pa_mode_type_lkpcd = 'BT'
--AND (pr.status_cid = 86 OR pr.status_cid IN
(20, 70, 30, 80, 25, 101, 96)
--AND pr.pa_rqst_sid = 75006271If if you have given join conditions proper and if data exists ,you can see set of rows displayed.
Next step is to keep on uncommenting each of the where condition
AND pr.oprtnl_flag = 'A'Like this you 'll come to the condition which does not match your requirement
Hope this helps
Regards,
Achyut

[Solved] ADF - Update does not return values generated by a trigger

Hello,
I'm using JDev 10.1.3.3.0 and DB 10.2.0.3.0.
On DB I've created a table, a sequence and a trigger:
CREATE TABLE TAB1
     ID          NUMBER          PRIMARY KEY,
     EDITED_AT     DATE,
     VALUE          VARCHAR2(64)
CREATE SEQUENCE S_TAB1
     INCREMENT BY 1
     START WITH 1;
CREATE TRIGGER T_TAB1_BIE
BEFORE INSERT OR UPDATE ON TAB1
FOR EACH ROW
BEGIN
     IF INSERTING THEN
          SELECT S_TAB1.NEXTVAL INTO :NEW.ID FROM DUAL;
     END IF;
     :NEW.EDITED_AT := SYSDATE;
END;
/In JDev I've created an EO - Tab1, a VO - Tab1View and an AppModule.
In the EO Tab1 I have checked "Refresh After Insert" and "Refresh After Update" for Id and Edited_By attributes. I made the latter two attribures as "Never" updatable.
Then I test the AppModule with a JDev Tester (I use a connection which connects as an owner of the 3 objects above).
Then I insert a new row and enter a value into the Value field in the Tester. When I press Commit button everything works great - Id and Edited_By attributes get populated with values generated by the trigger.
But when I try to update the Value field and press Commit the Edited_By field does not retreives new value that was generated by the trigger.
Why does this happens?
Many thanks in advance.
Yerzhan.

Frank,
I tried to set Refresh option on both, Value and Edited_At, fields but unsuccessfully.
Then I tried to do the following in SQL Plus:
SQL> insert into tab1(value) values('ddd');
1 row created.
SQL> commit;
Commit complete.
SQL>
SQL> select * from tab1;
        ID EDITED_AT           VALUE
         1 27.03.2008 17:01:24 ddd
SQL>
SQL> declare dt date; val varchar2(64);
2 begin update tab1 set value = 'ddd' where id = 1 returning edited_at, value into dt, val;
3 dbms_output.put_line('txt = ' || dt || ', ' || val);
4 end;
5 /
txt = 27.03.2008 17:01:24, ddd
PL/SQL procedure successfully completed.
SQL>
SQL> select * from tab1;
        ID EDITED_AT           VALUE
         1 27.03.2008 17:02:12 ddd
SQL>As it can be seen Returning clause of an Update statement does not return a new date, i.e. 27.03.2008 17:02:12, that was updated by the trigger, it returns an old one - 27.03.2008 17:01:24.
Frank, maybe the issue is in the Oracle DB?

0EC_PCA_3 does not return data in RSA3 if the target system is entered

Similar Messages

Maybe you are looking for