0FIAR_C03 and material

Hello Gurus!
I'm totally new to SAP BW.
So far we have a standard 0FIAR_C03 cube for reporting on AR data.
We have folllowing situation
Organizational unit PC (profit Centre) is attribute of material data (in MARA table). So in sales, we can analyze data through material attribute PC. And this (analyze data with PC attribute) we would like to do also in AR (accounts receivable) through 0FIAR_C03 cube.
So basicaly, our requirement is that this cube (0FIAR_C03... or some other AR cube if easier) includes also material data or PC attribute/dimension.
Any idea, solution about this??
Regards
Gorazd

Hi,
   You need to enhance structure. You can get profit center and segment frim FAGLFLEXA table.You can use the following code in CMOD
WHEN '0FI_AR_4'.
    LOOP AT C_T_DATA INTO WA_FAR.
      L_TABIX = SY-TABIX.
      SELECT * FROM FAGLFLEXA WHERE RLDNR = '0L'
                           AND RBUKRS = WA_FAR-BUKRS
                           AND GJAHR = WA_FAR-GJAHR
                           AND DOCNR = WA_FAR-BELNR
                           AND buzei = WA_FAR-BUZEI.
        IF SY-SUBRC = 0.
          WA_FAR-ZZSEGMENT = FAGLFLEXA-SEGMENT.
          WA_FAR-ZZPRCTR   = FAGLFLEXA-PRCTR.
        ENDIF.
      endselect.
      Modify C_T_Data from WA_FAR INDEX L_TABIX.
Regards
Baljit Singh

Similar Messages

What are the precautions to be taken while archiving the POs' and Material

Hi All,
I want to archive the Purchase orders and Material documents. Is there any standard rule to follow this procedure. What are the further consequences for the consecutive documents. And how do you check the open POs' of all.
I have archived PRs' and Invoices, but these are not interlinked.
Could you please help me in this, so that I will be very much thankful to you.
Regards,
Ram

Dear Ramesh,
Go to Tcode ARCHGUIDE --> Application Specific analyses and setting --> MM -->MM_EKKO and MM_MABTEL
You can tick on the documentation and link to SAP help for all the guide and need for this archiving.
Regards,
w1n

Issue to make mandatory field(SELD/BBD and Date of manufactor)in migo for particular Material type and material Number starting with'1' series.

Hi friend,
i have issue regarding mandatory self life field (SELD/BBD and Date of manufactor)in migo for Batch Tab for particular Material start with '1' Series and material type.
i want to make mandatory above field during GR from migo..any one let me know exit or badi for that to full fill this goal..
Regard's,
shaikh Khalid.

Hi Shaikh
First of all Thread is not closed seconldy as a good practice if you have resolved your issue kindly document it here so that it may help someone in future
Nabheet

PO number and material issued against this PO for subcontracting

How to know the link in between the PO number and material issued against this PO for subcontracting.
I have checked that PO history is not getting updated.
Thanks,

Hi,
We have 2 different scenarios where you can post a goods issue to Subcontract Venodrs.
Scenarios 1: You can post the goods issue against a subcontrac vendor with out referencing the Subcon PO from ME2O, at this stage we will be knowing what is the stock at subcontract vendor but we will not be knowing the issues against which and how much Quantities are posted.
So when we are post goods receipt, then we will come to know the consuption quantities.
Scenario: 2, If we use the delivery concept then we can track the goods issues against the subcon POs.
If you really keen to track the material issued to Subcon vendor against a PO so better use with delivery.
Thansk,
Satya.

PO Line Item wise gross value for combination of WBS and Material Group

Hello,
Our requirement is to get report for PO Line Item wise gross value for combination of WBS and Material Group. Standard report ME2J gives net price but not gross value for Material Line items. Please let me know if any standard report( or ME2J) will suffice this requirement.
Regards,
Milind Dumbre

Dear Milind
No standard report available to get the PO Line Item wise gross value for combination of WBS and Material Group. Please go for development by taking reference ME2J.
Warm regards
Ramakrishna

How to find the Open sale orders till date for given plant and material ?

Hi experts,
                 I have a requirement to calculate the open sale orders for a given plant and material. I have tried in VA05 wherein i can get only for the material and sales area combination. From the document nos obtained from VA05 i can then find the plant. But my question is how do i get the output of VA05 into my progra. (can i use submit for a module pool report ).
Also if ther is some other standard table or Function module to find the open sale orders till a given date ,it will be even more helpful....in which case i can drop the VA05 route.
Kindly help
Thanks in advance
Ashwin

Hi Ashwin,
    You can use SAP Tables VBAK and VBUP to get to know if the document is complete or not.
   VBUK-GBSTK is the field that will give you the status of the Sales Order .
VBUK is used at header level , whereas VBUP is used for Item level.
So in your case what I would do is :
Get the Sales Orders that satisy the plant and material criteria from VBAP table , take this Sales Document numbers and go to VBUK or VBUP table to get the Sales Order Status.
   If I need to find the open quantity as well I will link to VBFA table based on the document number.
Reward if helpful.
Thanks,
Imran

Table for finding rate based on part code and material

Hi Experts
I am an ABAP consultant with ltd knowledge on SD . Please tell me in which table I can find the rate based on party code and material .

Hi
The standard table is A305. But usually these tables can be customized based on the requirement. So if you are aware about the Condition type for which this Price/Rate is maintained you can find the same in VK13.
In transaction code VK13, maintain the condition type and click on "Condition information" icon. Now dont maintain any input date. Just click on Execute icon or F8. System will give the list of all the tables and data maintained based on the combination.
Select the required table.In SE11, maintain this table with prefix as A. You can get all the required information.
Regards
Vamsi

Table and Materialized View in different namespaces?

I've just faced something completly new for me. It appears that there are two objects with the same name and owner. Table and Materialized View have the same names and when I look into system dictionary I can se sth. like that:
OWNER OBJECT_NAME OBJECT_ID DATA_OBJECT_ID OBJECT_TYPE NAMESPACE
USER_A USER_TABLE 159381 159381 TABLE 1
USER_A USER_TABLE 159382 MATERIALIZED VIEW 19
(I couldn't find how to write above with const length font).
Two object in different namespace? I thought that Tables and Materialized Vievs have the same namespace.
Can you please tell me how can I create objects to achieve above result? I would also be grateful if you tell me where to find that topic in documentation.

Perfectly normal.
SQL> select object_name, object_type from user_objects where object_name = 'TEST_MV';
no rows selected
SQL>
SQL> create materialized view test_mv
2 as
3 select sysdate from dual;
Materialized view created.
SQL>
SQL> select object_name, object_type from user_objects where object_name = 'TEST_MV';
OBJECT_NAME                                        OBJECT_TYPE
TEST_MV                                            TABLE
TEST_MV                                            MATERIALIZED VIEW
SQL>
SQL> drop materialized view test_mv;
Materialized view dropped.
SQL>
SQL> select object_name, object_type from user_objects where object_name = 'TEST_MV';
no rows selected
SQL>

How to get classification for a given material and material type in MM

Hello Friends,
One of my developer colleagues is struggling to find out : how to get classification for a given material and material type in MM?
He is looking for probable table and table fields to Select from.
I would appreciate seriously any help in this regard.
~Yours Sincerely

Hi
Below given the flow and table details for a given class and class type.
- Table KLAH --> This contains the "Internal class no" [ for the given Class & Class type ]
- Table KSML --> This contains the " internal character numbers " [ nothing but characteristics attached to the class ] , which can be fetched with the above fetched internal class no
- Table AUSP --> This table contains the objects ( material ) attached to the internal characters of that class
- Table CABNT --> This table contains the "Description" for the internal character numbers.
- award points if this is ok

Replication of Customer and Material master from R/3 to CRM

Hi
Recently in our quality server basis administrator has made a client copy from production server after that customer master and material master are not flowing from R/3 to CRM, even sales orders were not getting copied from CRM to R/3 , i went through C71 BB config document and fixed the sales orders updation from CRM to R/3 but not able to resolve the problem of customer master and material master from ECC to CRM.
I went to B09 BB document and all settings are fine.
Using R3AS I have loaded following objects DNL_CUST_PROD0, PROD1, PROD3, SPROD , DNL_PLANT. and Material.
I went to R3AM1 and checked the status as running or wait for each object.
There are no filters in R3AC1 .
Queue name withR3AD_MATERIA0000000001 has status SYSFAIL in SMQ2 .
What can i do to resolve this problem.
Please advice.
Thanks,
Vaishnavi

Hello Vaishnavi,
After the client copy , have you run txn:BDLS in order to change the LOGSYS in all relevant tables?
You can run this txn in test mode as well to see the affected tables.
Are you getting any dump on these load ?Check it in txn:ST22.
Hope this helps!
Best Regards,
Shanthala Kudva.

Display 'item text' and 'material PO text' in a purchase order ?

hello,
i am creating a purchase order and i have inputted the 'item text' and 'material PO text' in the ITEM TEXT of the ITEM DETAILS section. I have a smart forms where i am displaying the purchase order by displaying fields from various tables like ekko,ekpo,t024,eket etc ..
I want ti display the 'item text' and the 'material PO text' on the smartform but i cant find the table or the fields which keep these values(text) ??
help me on this one ? thanks for yur time...

c the example below:
PERFORM read_text USING g_transp 'Z010'.
FORM read_text USING l_text l_id.
DATA : lt_text TYPE TABLE OF tline WITH HEADER LINE.
DATA : l_name LIKE thead-tdname.
CLEAR l_name.
l_name = g_delivery.
CLEAR lt_text.
REFRESH lt_text.
CALL FUNCTION 'READ_TEXT'
    EXPORTING
CLIENT                        = SY-MANDT
      id                            = l_id
      language                      = sy-langu
      name                          = l_name
      object                        = 'VBBK'
    TABLES
      lines                         = lt_text
   EXCEPTIONS
     id                            = 1
     language                      = 2
     name                          = 3
     not_found                     = 4
     object                        = 5
     reference_check               = 6
     wrong_access_to_archive       = 7
     OTHERS                        = 8
IF sy-subrc <> 0.
   MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
           WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR l_text.
LOOP AT lt_text.
    CONCATENATE l_text lt_text-tdline INTO l_text.
ENDLOOP.
ENDFORM.                    "read_text

Authorization for material type and material views

Hello all,
I would need to restrict a user group, in creation (MM01) and modification of material master, based of type material and material views.
The authorization, for each user should be:
- view, modify and create of all views, except accounting (B) for type material ZFER;
- view, modify and create of all views for type material ZOFF.
I tried to create 2 roles in PFCG with the following authorization objects:
1) M_MATE_MAR (Material Master: Material Types) ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B)
2) ) M_MATE_MAR ACTVT = *, BEGRU = ZFER and M_MATE_STA ACTVT = *, STATM = B
but the effect is to be authorized, to all view for material type ZFER and ZOFF.
I have already updated the authorization group of the type materials (OMS2).
Is there a solution for this problem?
(component version SAP ECC 6.0)
Thanks.
Regards,
Luca

I tried to create 2 roles in PFCG with the following authorization objects: 1) M_MATE_MAR (Material Master: Material Types) ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B) 2) ) M_MATE_MAR ACTVT = *, BEGRU = ZFER and M_MATE_STA ACTVT = *, STATM = B
- Are both these roles assigned to the same user? then your purpose is not solved, It is more or less like giving full authorization.
- One role should be
M_MATE_MAR (Material Master: Material Types) ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B) for view, modify and create of all views, except accounting (B) for type material ZFER. This should be assigned to one user
- Second role should be
M_MATE_MAR ACTVT = *, BEGRU = ZOFF and M_MATE_STA ACTVT = *, STATM = * for view, modify and create of all views for type material ZOFF. This role should be assigned to the second user.
Regards,
Subbu

How can I deactivate the pricing date and material pricing group in VA01?

Hello All,
How can I deactivate (output only) the pricing date and material pricing group field in VA01/2, VA21/2, and VA41/2? What user exit can I use? Thanks in advance...
PeeJay

You can use the t.code SHD0, choose your transaction variant here, further choose your screen variant.
Next select your screen variant and in the Menu bar select Variant> change with processing>Make repairs in foreign namespaces only if they are urgent> Continue(Enter)>again 'enter'>Object can only be created in SAP package>continue(enter)> Exit and save >This variant contains other screens, adopt these as well?>enter>enter> scroll down to the entry 'pricing date' or VBKD-PRSDT make the necessary changes and save.
The system will prompt to assign a package and request enter the necessary values.
Your issue is sorted!!
Regards,
PATHIK

PO print OUT And material Document Print Out is coming In English

HI all.
I have Created Vendor In ZH(chinese Language,)and in material master I have maintained description in Chinese language.
I'M taking PO and material Documents print outs in Chinese Server log-in.
even Though Im taking Print outs in Chinese Log-In server, IM getting Print outs in English Language only not In chines language..
At the Time Of PO creation the Communication Language is ZH(Chines)..
I have read some related post even 89899..
But I have not find solution
plz help me.
thanks and regards
ramesh reddy.'

Check SAP Note 894444 - Tool for server-based printing on Windows (SAPSprint) for your requirement,
Installation
Before you install SAPSprint, delete SAPLPD manually. To do this, you normally need to completely delete the installation directory only. If you installed SAPLPD as a service using the srvany tool, you can remove the service by calling 'Instsrv SAPLPD remove'.
You can download SAPSprint as a self-extracting executable file from SAP Service Marketplace:
1. Entry by Application Group (on the left)
2. SAP Frontend Components (on the right)
3. SAPSPRINT (on the right)
4. SAPSPRINT <Release> (on the right)
5. SAPSPRINT <Release> (on the right)
6. Win32 (on the right)
Start the program. After you enter the installation path, the system prompts you to enter the TCP/IP port.
Normally, the default setting of 515 is suitable for the port. You should only change this setting if the Windows TCP/IP print service is also running on the computer. The SAPSprint Windows service starts as soon as the installation is over.
We recommend that you set up the following options for the service in the Windows Service Control Manager:
The service should run under a domain user that has the relevant authorizations for the required printers. After the installation, the service runs under "Local system account". This can access locally-defined printers only. You can set the user in the Windows Service Control Manager, in the options of the SAPSprint service.
If you want to delete SAPSprint, you can do so using the normal Windows uninstall tool.
We recommend that you install the SAPSprint service on a separate computer and not together with a SAP system, especially if you use a large number of printers. All printers that SAPSprint uses must be installed on the SAPSprint computer. This applies particularly to released printers from other computers. These should be installed as a queue on the SAPSprint server.
Also note further settings in accordance with Note 1069483.
Settings
You can display the call parameters available for SAPSprint by calling 'sapsprint -?' on the command line. The most important parameters are those that set options, especially log options for troubleshooting.
You can set the log level to 5 by specifying 'sapsprint -oi LogLevel 5'. Immediately after installation, no log level is set up, which means that no log file is created. By setting the log level to 1, 5, or 9, you can ensure that more information is available in the directory that you specified during the installation. A file called sapsprint.dbg and a print job specific file with a variable name are generated. The second file is deleted after successful printing. It is only retained if the printout is recognized as incorrect. If you set the option 'sapsprint -oi KeepFile 1', then both this file and the print file are retained. This is primarily intended for troubleshooting by SAP Support.
All options are case-sensitive. You can display the most important SAPSprint options by calling 'sapsprint -?'. All possible options are described in Note 85469. Normally, the options described there are not necessary - you should use them only in exceptional circumstances.

Limit PO - Confirmation with Time and Material

To All:
We are in SRM 7.0 - Classic Scenario and ECC 6.0 EHP4.
We implemented the use of Limit PO in SRM to enable us to create a PO for Services that will give us the Value Limit and Expected Value functionality. In our scope the Limit PO can be confirmed in SRM for Time Entries and Material(s). Unfortunately we can only enter time and if we add material by clicking Add Item dropdown and choose As Free Description. We are getting an error message Inconsistent Parameter During Method Call after we enter the item type as material and the of measure as ea.
We did not implement SUS and if we do it in ECC through ML81N transaction, we can create Service Entry Sheet with time and materials.
Any direction on how to resolve this issue is appreciated.
Thank you all very much.
Mike

Hi
to understand SAP design funtionality . not to solve your issue
Note 502176 - Confirmation for mixed Backend goods/service purchase order
Symptom
1. When you enter a goods/services confirmation, the system displays the same purchase order several times in the search result.
2. When you expand the service purchase order item in the search, the system displays the material items.
3. When you create a confirmation for the "material portion" of the purchase order, the system proposes the services of the first service purchase order item.
Other terms
eCommerce, Enterprise Buyer professional, EBP, BBP, B2B, BBPCF01, BBPCF02, BBPCF03, BBP_CF, SAPLBBP_CF, Backend, service
Reason and Prerequisites
You enter the confirmation for an (R/3)-Backend purchase order which contains both material items and service items.
Solution
Ad 1:The display in the search result is correct!
An entry is generated in the search result for EVERY service item. In addition, ONE other entry is generated for the total of all material items.
Background:You cannot post any mixed goods and service confirmations in the R/3 system.
Every Backend service purchase order item can include one or several service items as well as a limit, however, which are NOT broken down in the search result.Ad 2 and ad 3:Implement the attached program corrections.
Muthu

0FIAR_C03 and material

Similar Messages

Maybe you are looking for