0I_FYPER - Variable in BEx gives no result

Hello all,
I have a problem in BEx-reporting after a releasechange from BW3.5 to BI7.0 and at the same time SEM-BCS4.0 to SEM-BCS6.0 which belongs to the variable 0I_FYPER. I use this variable in the columns (only) in order to give the user the possibillity to define which periods to show. In the rows I use the rest for defining which numbers to bring up. It worked in BW3.5/SEM-BCS4.0 fine.
I debuged the content of the variable in user-exit ZXRSRU01 (after processing the selection screen) and could find the data I entered but the query gives no result. Any ideas?
Thank you for any feedback,
Chris

Hi Guru,
We have a work around for your issue. Just create a customer Exit variable on the calendar month and use it in the filter.
In the customer Exit variable read the Plant variable and if it is empty populate # as result. Else read the calmonth input variable and populate it as the result.
Use the following snippet to read input ready variables.
DATA: loc_var_range LIKE rrrangeexit.
READ TABLE i_t_var_range WITH KEY vnam = 'VARNAME' INTO loc_var_range.
(loc_var_range-low will have the value of the variable)
Hope this helps.
Regards.
Shafi.

Similar Messages

HOW TO DO VARIABLE IN BEX ANALYSER IN BI-7 GIVE SCREENSHOTS DETAIL

HOW TO DO VARIABLE IN BEX ANALYSER IN BI-7 GIVE SCREENSHOTS DETAIL

Hi
I hope these links helps you,
Defining Variables:[http://help.sap.com/saphelp_nw70/helpdata/EN/ac/789b3c4d4d8d15e10000000a114084/content.htm]

How to put variable selection and the query result the same screen

Dear all,
how can I put the variable selection and the query result in the same screen? Please advise. Thanks.
Jin Ming

Not sure if you are saying you want the prompts on the same page as the results... however in 7.0 with BEx Analyzer, you can insert a text object from the design toolbar and assign it to the variable.... this way, lets say you run query for period 6, then the text object will display "6" on the same area where the query results are.

Rectrict list of possible values for variable in Bex

Hello folks!
I need to give a user possibility to choose only few value for variable in Bex report. Number of entries in master data is huge. I need to show only 7 possible values in the window with variables.

Amy,
You have a tricky requirement but I can only think of one thing but it would require user training. Try the following.
You can setup a new variable with default values and define it as type multiple single values.
The user could in the variable screen would then need to take out the ones that are not needed.
Hope this helps.
-Sid

Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?

Hello
I'm currently developping an image processing algorithm using Labview 7.1 and the associated IMAQ Vision tools. After several tests, I found a weird result. Indeed, I put the labview algorithm - including the IMAQ VI on the library to get sure that I use all the time the same VI - on my memory stick and used it on two different computers. I tested the same picture (still in my memory stick) and had two very different results.
After several hours trying to understand why, I found that there were a difference between the results given by both computers at the very begining of the algorithm. Indeed, I used a JPEG file.
To open it, I first create an Image with IMAQ Create (U8). Then, I open it.
Then in my first sub-VI, I use IMAQ Cast Image to be sure that the picture is a U8 grayscale picture.
Right after that, I use the IMAQ Linear Averages. The results of this VI are different on the two computers.
I tried several time on the same picture : one computer always give me the same result but the two computers give me a different result. So there is no random variable on the results.
So my question is : Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?
My bet is on IMAQ Cast Image but I'm not quite sure and I do not undestand why. The labview and IMAQ are the same on both computers.
The difference between the two computer are above :
Computer 1 :
Pentium(R) 4 CPU 3.20GHz with a RAM of 1Go. The processor is an Intel(R).
The OS is windows XP Pro 2002
Computer 2 :
Pentium(R) 4 CPU 2.80GHz with a RAM of 512Mo. The processor is an Intel(R).
The OS is windows XP Pro 2002.
If anybody can help me on this problem, it would be really helpful.
Regards
Florence P.

Hi,
Indeed it's a strange behaviour, could you send me your VI and your JPEG file, (or another file that reproduces) so that I could check this inthere ?
I'll then try to find out what's happening.
Regards
Richard Keromen
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Découvrez, en vidéo, les innovations technologiques réalisées en éco-conception

Match codes variables in Bex

Hi.
I'm working in a system that receives data from several SAP source systems and several company's. This causes an huge amount of master data. If a variable is used to select data and if the user pushes F4, all data is showed without any restriction and showing data that is not relevant to the company that it's using the query?
Is there a automatic way to restrict the data showed without changing the search help?
Thanks,
Sónia

Hi Ankit,
To create a variable in BEx,just a simple Varaible.........like for Calday-DATE
1)Open the BEx and on the Left hand side u can c in the Dimemsion s.
2)Drill down the Dimension,and fine CALDAY in the Time Dimension.
3)In Drill down u hvae Characteristic Value Variable
4)Right Click on the same and Create New.
5)now u can see a new variable with RED Mark and towards ur RIGHT Screen --in the Properties
u have to Fill few information
6)Give a Meaning Full Name in the Description and a Tech name in the NEXT Tab.
7)In the saem Properties TAB gotot Details TAB and in BAsic Settings--
a)Variabel Reresents-Single/Multiple,Optional -Depending on the requirement.
b)Variable is --Optional/mandatory-Depending on the Req
c)Variable id Ready for Input--Tick --Yes or No.-Depending on req.
After Creating this u can Drag and Drop the Variable from Left Screen of Dimension to the Filter -Char Restrictions part of the Report.
There are also SAP deliverd Variable which u have Just Drag and Drop for SAP Deliverd Objects like date--The Tech NAme of the Variabel is 0DATE.
Based on Ur Requiremnt u can create the Variable.
Rgds
SVU
Edited by: svu123 on Sep 25, 2009 8:58 AM

How to create a variable in Bex Query Designer

Hi guys,
I am writing a query for a travel management report using the SAP Standard cube. I would like to restrict the query so it only shows me the last two months excluding the current month. I have checked BI content in RSA1, but I canu2019t find a relevant SAP standard variable that I can use.
Can anyone please tell me if I can create my own? And if so, how I can do this.
Many Thanks
Forhad.

lets say u want to display following picture:
sept$-----august$
City
-chicago123$--
44$
so in Query designer go to Default values section.
Bring in Calendar month
right click calendar month
and hit Restrict
now select variable
use standard sap variable Current Month.
hit okey
now select Variable and hit Red button
Result u restricted current month.
in columns bring in keyfigure $
right click and hit edit
bring in time field calendar month
right click and hit restrict
bring in Current month
right click and select - SET OFFSET FOR VARIABLE
select -1
hit okey
repeat the above process
and this time select offset = -2
this way u restricted current month
but displayed last 2 months for keyfigure values.

How to create Text Variables in BEx Query Designer

How can i create Text Variables in Bex Q.D.
I am able to create characteristic variables
but i can't find option to create text variables.
What's the requirement to create Text variables in Bex Q.D.
When i try to create Text variable for 0calDay.. the variable type is characteristic by Default and disabled.
How can i create text variables related to 0CalDay with which i need to work in Customer Exit.

Hi,
You have to create characteristic variable processing by Customer Exit by considering 0CalDay as a Reference Characteristic
After creation of the above variable, you restrict your KF with the above created variable.
Now you can create a Text variable for the description of your KF. This way it works...........
Regards,
Suman

Custom search using boolean attribute set to True gives no result

I am setting up an auto-query using the custom search portlet. This is to show all items where a boolean custom attribute is checked, ie = True.
In step 3 I have tried to set the operator to Equals to and the default value to True. This gives no results even though several items have this attribute set to True.
The Auto Query check box is checked.

Found that True = 1 in database. When set to this the search works.

How to create a variable in BEx 7.0

Hi,
Can anyone please tell me how to create a variable in BEx 7.0
In 3.5, when we right click on a characteristic, we used to get an option for restrict.
I cant find any such option in 7.0

Hi,
Right click on the characteristic 0CALMONTH in the default values or drag it to char. restriction section and say restrict.Pull the drop down menu in that to select variables. There u will get a create icon.Click on that...then in details tab u can specify whether mandatory,interval and all..
Regards,
Rathy

Calendar prompt for Date variable from bex

Hi All,
I have a Bex query where I have a variable on 0CALDAY
- Customer exit (i_step = 1 to populate with current date)
- Single value
- Mandatory
I created universe on this query and in webI selection screen i do see the variable prompt.
I am not able to see the current date populated automatically since exit values are not populated to WebI at runtime.
My problem is that in WebI selection screen we get list of date values from the info provider instead of Calendar prompt
where user can enter the values directly.
I am currently on BO XI 3.1 SP3.
Is there any specific setting in Universe or bex query which is required to get this Calendar prompt instead of list of values for dates?
Note: When we were on SP1 the universe created then had same variable from bex and it still shows us Calendar prompt but ever since we upgraded to SP3 for the query splitter functionality we not able to get the calendar prompt for date variable in new universe we create
Thanks
Ritesh

Yep.
Now tell me how you want to show that Prompt @ WebI report level.
My problem is that in WebI selection screen we get list of date values from the info provider instead of Calendar prompt
where user can enter the values directly. Exactly, i didn't get this??
@Prompt:
You have flexibility to show options like:
Mono/Multi: User can select Single value or Multiple.
BW Variable: Same we have (Single/Multiple)
Free/Constrained: User can Enter his/her value directly or No change option.
BW Variable: By defalut you will get this, once you made it to Optional input.
Persistent/Not_Persistent: Refreshed report has to show last selected value means use Persistent otherwise Not_P.
By seeing the Prompt syntax , I can say your Variable is after Customer Exit, Correct??
Workaround for your Problem is:
<FILTER KEY="ZV_DATE"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Date (Previous Day)','A','Date\LovDate (Previous Day)Base',mono,primary_key)"/></CONDITION></FILTER>
You have to remove that Date class and objects from prompt syntax. Because of that it showing up LOV's not calendar.
Like:
<FILTER KEY="ZV_DATE"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Date (Previous Day)','A',',mono,primary_key)"/></CONDITION></FILTER>
Why, It should be blank??
Because Date needs no class\object to show up, by default you will get Calendar on the fly.
Hope you got my point.
Thank You!!

'Text' of a variable in Bex selection screen

Hello,
We have a customer exit variable in Bex Query selection.it is mandatory,ready for input,interval which is on 0CALMONTH2.
In Bex selection screen i am not getting text of default/entered months.
for example: if default value is 2 to 4,then text would be FEB to APR.
what could be the reason?how to get teaxts of entered values?
(we have one more customer exit variable on 0CALMONTH2 which is single value and it shows text of enterd values in bex selection)
In web it is working fine.
Rakesh

Hi,
Try to create an another customer exit variable for 0CALMONTH2 with mandatory,ready for input,interval. refer the abap code of the another customer exit variable(single value variable) of 0CALMONTH2 which you have mentioned in the bracket and modify the abap code based on the selection - interval. hope it helps.
Regs,
Vachan

How to create variables in Bex query

Hi all,
can anyone please explain how to create the variables and how many types of variables in Bex Query.
Thanks in advance
James

Hi James,
You can create variables in the BEx Query by right clicking on your characteristic and then selecting Restrict. A pop up window will appear. On the left side of the pop-up window, right click on a white space and then select New Variable. The Variable Wizard will then appear - you can now create your variable acording to your specifications. For more info on variables, please click on the link below:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56a7e09411d2acb90000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/61/579b3c494d8e15e10000000a114084/content.htm
Hope this helps,
Juice

Is it possible to create a variable in bex with the last work day?

Hi Gurus
Is it possible to create a variable in bex with the last work day?
Actually end-user every day open queries,
    - Put in selection date day - 1 or
    - put last Friday if the day is Monday or
    - put last Thursday if the day is Monday and Friday is holiday (in a calendar for example 25 the December).
Please do the needful. It is urgent
Thanks in advance
Raj

Try this logic in a customer exit:
DATA: l_s_range TYPE rsr_s_rangesid.
DATA: X_PERIOD LIKE T009B-POPER,
           X_YEAR   LIKE T009B-BDATJ.
CASE I_VNAM.
WHEN 'ZPREVWORKDAY'.
    DATA: l_DayOfWeek(1) TYPE C,
          l_act_date     TYPE d,
          l_prev_date    TYPE d.
    l_act_date = sy-datum.
    CALL FUNCTION 'DATE_COMPUTE_DAY'
         EXPORTING DATE = l_act_date
         IMPORTING DAY = l_DayOfWeek.
    CASE l_DayOfWeek.
      WHEN '1'.
        l_prev_date = l_act_date - 3.
      WHEN '2'.
        l_prev_date = l_act_date - 1.
      WHEN '3'.
        l_prev_date = l_act_date - 1.
      WHEN '4'.
        l_prev_date = l_act_date - 1.
      WHEN '5'.
        l_prev_date = l_act_date - 1.
      WHEN '6'.
        l_prev_date = l_act_date - 1.
      WHEN '7'.
        l_prev_date = l_act_date - 2.
    ENDCASE.
    l_s_range-low = l_prev_date.
    APPEND l_s_range TO e_t_range.
ENDCASE.
Edited by: Tyler Blouse on Feb 13, 2008 8:28 PM

Not able to access the Date variable in Bex report after SP upgrade

Hell Experts,
We have upgraded the support pack to 27 and after that we are not able to access date variable in Bex report.
We are not able to restrict the Posting date on variable, we are getting the message "Operation failed! No detailed error information from backend available".
Thanks
Chetan

Hi,
carry out basic checks like RSRV for the field,query ,Infoprovider on which this query is based..
Check whether there is any in consistent value in the posting date..
check whether objects are active correctly..
else serach for SAP note or raise OSS to SAP..
Thanks and regards
Kiran

0I_FYPER - Variable in BEx gives no result

Similar Messages

Maybe you are looking for