0LOGSYS transfer routine error transporting DEV- QA

Hello!
I need to transport several business content infocubes and loading flow(migrated from 3x to in 7.0) from DEV to QA.
In QA I've imported also infoobject 0LOGSYS and his transfer routine. But it appears iinactive. When I display the transfer routine from characteristic 0LOGSYS, is missing this part of code::
IF RESULT IS INITIAL     and
     IOBJ_NAME = '0LOGSYS'.
fill source system
    RESULT = SOURCE_SYSTEM.
What can I do ? In DEV, the code is ok. Can I modify it manually ? Other what must I do in DEV to repair it?
Thanks a lot !

I need to activate the object 0LOGSYS from Business Content again ? or manually with change and also change and save the routine?
In STMS I have:
Start of the after-import method RS_IOBJ AFTERIMPORT for object type IOBJ
Syntax error Incorrect statement :Expression missing . in row 20 position 0
Characteristic 0LOGSYS: Error when activating or checking the transfer routine
This infoobject, 0LOGSYS is also attribute for others infoobjects and I have also errors like:
Attribute 0LOGSYS from characteristic 0BUS_AREA is not actively available.
I've imported also a data source 3x migrated to 7.0 with the transformation and an infocube, and I have error:
Start of the after-import method RS_RSDS AFTERIIMPORT for object type RSDS
Soource system DEV does not exist
Start of the after-import method RS_TRFN_AFTER_IMPORT fot object type TRFN
No rule exists.
Source RSDS mysource DEV does not exist
AND SUMMARy:
Object IOBJ 0logsys imported with errors
Thanks!

Similar Messages

Syntax error during transport on valid transfer routines

Dear All,
We have some routines in a tranfer structure that are valid and working just fine in DEV. But when we transport them to QA we get the following error message :-
Start of the after-import method for object type R3TR ISTS (Activation Mode)
Transfer structure 6DB_V_BW_EPISODE_AD activated under the name 6DB_V_BW_EPISODE_AD
It is not necessary to copy dependent objects for transfer structure 6DB_V_BW_EPISODE_AD
Syntax error in transfer routine for InfoObject OPEN_DAT
Activating Transfer Rules 6DB_V_BW_EPISODE_AD ...
47 Transfer Rule(s) of the transfer structure 6DB_V_BW_EPISODE_AD removed from control table
53 InfoObject(s) of the transfer structure 6DB_V_BW_EPISODE_AD removed from control table
Formulas have been saved
Syntax error in transfer routine for InfoObject OPEN_DAT
If we remove all the routines the activation works just fine even though our routines are valid and working just fine in DEV.
Can anyone explain this as this is becoming quite urgent now ?
Thanks in advance.
Craig

Hi Oliver
I work with Craig. In response to your question, what he means is that all objects independantly have been transported ok, apart from the transfer rules. If you look at the table RSTSRULES you will see a column called CONVROUT_L.
In our Dev system this field contains the BW generated rule code. Eg.
45GEGC5I66GA9Z5G4KFDDRIK4 against the Transfer structure. When the after import process runs, it uses the contents of this table together with the contents of the RSAABAP table which contains the code and creates the transfer rule program.
In RSAABAP we have the following code for CODEID '45GEGC5I66GA9Z5G4KFDDRIK4'
DATA: l_s_errorlog TYPE rssm_s_errorlog_int.
CHECK NOT &TS&-opened_date IS INITIAL.
IF &TS&-opened_date < '19000101'.
&RS& = '19900101'.
ELSEIF &TS&-opened_date > '29990101'.
&RS& = '19900101'.
ELSE.
&RS& = &TS&-opened_date.
ENDIF.
returncode <> 0 means skip this record
&RE& = 0.
abort <> 0 means skip whole data package !!!
&AB& = 0.
In our QA system the column is blank because of the wierd Syntax problem when generating the program, therefore the transfer rules dont get activated.
As you can see there is no problem with the ABAP.
Regards
Mark

Transport error from dev to quality

HI,
I am getting following error from Dev system to Quality while transporting the request please suggest me the solution.
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Activation Mode
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Activation Mode
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Activation Mode
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Post-import methods of change/transport request completed
      Start of subsequent processing ... 20100409231713
      End of subsequent processing... 20100409231716
Thanks,
kranti

Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKDATE is not available in version A
Inconsistencies found while checking DataStore object ZTCM_D02
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Delete Mode
Errors occurred during post-handling RS_AFTER_IMPORT for ODSO L
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import methods of change/transport request D21K918324 completed
     Start of subsequent processing ... 20091112090953
     End of subsequent processing... 20091112090954
can u please post complete error message that ur getting
in the above one the DSO is sent to quality but without infoobjects in Quality
so the tranport got failed

Errors in Transfer Routine for 0MATERIAL_ATTR

I created a transfer routine on the 0Material_attr upload that needs to populate an attribute called Z_CPFX.
Problem is, I need to look at the material number, material group, and the Material Description, and then populate the result based on what I find.
I am new to using ABAP in these routines, so any help would be appreciated. I will award points.
The error I keep getting is E:Field "TRAN_STRUCTURE-MATNR" unknown.
Could somebody take a look at my ABAP and advise what I'm doing wrong?
Thank you.
Ken
$$ begin of routine - insert your code only below this line -
DATA: l_s_errorlog TYPE rssm_s_errorlog_int.
DATA: X_DESCRIPTION TYPE TABLE OF /BI0/TMATERIAL. " KC01
 select *
 into CORRESPONDING FIELDS of Table X_DESCRIPTION
 from /BI0/TMATERIAL
 where tran_structure-matnr = /BI0/TMATERIAL-matnr.
IF MATKL between 765 and 770.
 RESULT = 'MAPOO'.
ELSEIF MATNR(1) = 'X'.
 RESULT = 'MAPOO'.
ELSEIF MATNR(1) <> 'X'.
 AND (MATKL = '750'
 OR MATKL = '751'
 or MATKL = '755'
 RESULT = 'MAPWK'.
ELSEIF
 (MATKL = '756'
 or MATKL = '760'
 or MATKL = '761'
 and X_DESCRIPTION-TXTMD co 'renew'.
 RESULT = 'MAPRK'.
ELSEIF
(MATKL = '756'
or MATKL = '760'
or MATKL = '761'
and X_DESCRIPTION-TXTMD !co 'renew'.
 RESULT = 'MAPMM'.
ELSE.
 RESULT = space.
ENDIF.
returncode <> 0 means skip this record
RETURNCODE = 0.
abort <> 0 means skip whole data package !!!
ABORT = 0.
$$ end of routine - insert your code only before this line -
ENDFORM.

Hi Kenneth,
/BI0/TMATERIAL is the text table for 0material. If you are trying to get all the data from text table, please correct your select statement as below (text table does not contain the attributes. you might need to chenge the selection table to its attribute tables):
select *
into CORRESPONDING FIELDS of Table X_DESCRIPTION
from /BI0/TMATERIAL
where tran_structure-matnr = /BI0/TMATERIAL-MATERIAL.
I also see that some of your syntaxes are wrong:
eg: IF MATKL between 765 and 770. ==>
IF( ( MATKL > 765 ) and ( MATKL < 770 ) ).
Please look into the syntaxes of other statements as well.

Regd Data Transfer routine Transport

Hello All,
I have created a Copy Control Data Transfer routine 60X in the Development System. This created a Include RV45C60X in the Include RV45CNNN. When I check the where used list for RV45C60X it shows Include RV45CNNN. When I transported it to Quality System this Include was created but it was not in the Include RV45CNNN and the system was giving a short dump when SO created with reference to Quote.
I executed the program RV80HGEN and than also generated the Program RV45CNNN in the Quality system. Than the Include RV45C60X was shown in Include RV45CNNN and the system works fine. The where used list for RV45C60X does not show RV45CNNN even though it is in the Include RV45CNNN. Is that ok or something more needs to be done.
Can you please clarify.
Thanks,
SNK.

Hello friends,
Any suggestions for this. Or is this not an issue.
Thanks,
SNK.

Need help with transfer routine.

I am doing this enhancement in BW 3.5 version.
There is an object in ODS - > ZPATHNM (Pathname)
It gets data from ZPTDIR object.
Now, 0MATERIAL infoobject has text data. For PATH type materials it has descriptions like pt/dat/fafg.2.0 , pt/dat/ovg.2c ... so on.
The content after pt/dat/ for example fafq.2.0, ovg.2c is available in ODS object ZPATHNM (Pathname)
Since I have to extract PATH material numbers. So I created another object ZPATHMAT and mapping it to ZPTDIR.
I have to write a transfer routine when the 0MATERIAL text description had description beginning with pt/dat/ and the text after pt/dat/ is equal to data in ZPATHNM. i should get material number in ZPATHMAT.
This is the transfer routine, I have written between ZPATHMAT and ZPTDIR . This is working fine.
Data : ZDIRNAM type String,
            ZCONT1 type string,
            ZCONT2 type string,
            ZMATERIAL(18) type C.
ZDIRNAM = TRAN_STRUCTURE-ZPTDIR.
IF ZDIRNAM is not Initial.
Concatenate 'pt/dat/' ZDIRNAM into ZCONT1.
Select single MATERIAL
    into ZMATERIAL from /BI0/TMATERIAL
where TXTMD = ZCONT1.
RESULT = ZMATERIAL.
ENDIF.
Now there is another requirement, where I have to create one more object, ZPATHDES. This object should get Material description for path type materials from 0PROD_HIER text table.
This object, 0PROD_HIER is an attribute of 0MATERIAL.
So the logic to get the material description into ZPATHDES, is when the material number in 0MATERIAL is equal to material number in ZPATHMAT (generated from above routine), I should get description (TXTMD) from text table of 0PROD_HIER (/BI0/TPROD_HIER) into this ZPATHDES object.
I able not to connect this logic in the code and it is throwing errors.
I need help in coding.
Thanks.

Very hard to understand the logic in a thread. Can you please write your code, which is throwing errors? May be that will help us.
Regards
amandeep sharma

Start routine errors while activating transformations 2LIS_13_VDITM

Hi Friends,
I have an error while activating transformation for Cube: 0SD_C03
Transformation Z2LIS_13_VDITM
The start routine error is like this->
Start Routine: Syntax error in routine
Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
S:RSTRAN:552 38 0CRM_PROD 01 Standard Group 0MATERIAL
Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
Key rule 43 (target field: 0VERSION): Initial update set
pls guys if some one can suggest me to solve this i would be very greateful
Bala
Edited by: bala dondeti on Jun 20, 2011 12:32 PM
Edited by: bala dondeti on Jun 20, 2011 12:43 PM

Thanks for the info Umesh,
Just to be sure - I should simply change "SOURCE_PACKAGE" to "DATA_PACKAGE" in the code of the start routine? "Source_Package" is present in two places in that code:
METHODS
      start_routine
        IMPORTING
          request                  type rsrequest
          datapackid               type rsdatapid
        EXPORTING
          monitor                  type rstr_ty_t_monitors
        CHANGING
          SOURCE_PACKAGE              type tyt_SC_1
        RAISING
          cx_rsrout_abort.
and then after that in:
Migrated update rule call
Perform routine_9998
TABLES
    SOURCE_PACKAGE
CHANGING
    l_abort.
Or should I revert to the 3.5 version? (as a side note, that Data Source (2LIS_13_VDITM) has been activated in 7.0 version by default, when I replicated data sources in BW).
Praveen, as to your remarks, I have the datasource 2LIS_13_VDITM (in version 7.0) active, along with the appropriate Infosource. Transformation between the DataSource and InfoSource is active, and only the transformation between the InforSource and the Cube poses problems.
BR,
Alek

Am getting Routine error R6034. I can not open iTunes. Windows Vista Home 64 bit

For the first time,am getting a routine error R6034. Do not let open my iTunes, and possible lost all my contents. Why is this happening, is it nothing secure on the Internet no more even our music? Please I appreaciate any good help. I tried to redownload am stil the same message. During reinstallation.."Service Apple mobile device failed to start. Verify that you have sufficient privileges. Options ABORT,RETRY,OR IGNORE. That is what am getting.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

ERROR: transport error 202: bind failed: Address already in use

Hey guys,
I created 2 WL 10.3 Domains. I can start the admin server in domain but when I start the second admin server i get the following error:
starting weblogic with Java version:
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../.
./../src/share/back/debugInit.c:690]
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_E
RROR_TRANSPORT_INIT(197)
Starting WLS with line:
C:\bea\JDK160~1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket
,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx512m -XX:Com
pileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -XX:MaxPermSize=160m
-Xverify:none -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea... -da:
javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.
sbconsole... -Dplatform.home=C:\bea\WLSERV~1.3 -Dwls.home=C:\bea\WLSERV~1.3\serv
er -Dweblogic.home=C:\bea\WLSERV~1.3\server -Dweblogic.management.discover=tru
e -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true
-Dweblogic.ext.dirs=C:\bea\patch_wlw1030\profiles\default\sysext_manifest_classp
ath;C:\bea\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\bea\patch
cie670\profiles\default\sysextmanifest_classpath;C:\bea\patch_alsb1031\profile
s\default\sysext_manifest_classpath -Dweblogic.Name=TestAdmin2 -Djava.security.p
olicy=C:\bea\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../.
./../src/share/back/debugInit.c:690]
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_E
RROR_TRANSPORT_INIT(197)
Stopping PointBase server...
I changed the port address of both admins but I dont' think that's the issue. Can someone tell me whats going on.
Thanks

Hi
Iam getting the Same Error , Can you provide me some information on what changes did you made to the setDomainEnv.cmd file to make this work
thanks in advance

Info object transfer routine

Hi,
i had infoobject ZEBAY01 and need to write global transfer routine for this infoobject. Now the infoobject value is comming 0000999999 but the business wants the output value as 009999. They want to see output value as 6digit like (009999).can someone help me how to write code here
ROGRAM CONVERSION_ROUTINE.
Type pools used by conversion program
TYPE-POOLS: RSD, RSARC, RSARR.
TYPES: DE_ZEBAY01(000015) TYPE C.
Conversion rule for InfoObject ZEBAY01
Data type = CHAR
ABAP type = C
ABAP length = 000015
FORM CONVERT_ZEBAY01
USING RECORD_NO LIKE SY-TABIX
SOURCE_SYSTEM TYPE RSA_LOGSYS
IOBJ_NAME TYPE RSIOBJNM
CHANGING RESULT TYPE DE_ZEBAY01 " InfoObject value
RETURNCODE LIKE SY-SUBRC.
$$ begin of routine - insert your code only below this line

Hi Laxmi
Use the below code.
RESULT = RESULT+2(8).
RESULT = RESULT(6).
RETURNCODE = 0.
First Result will take from 8 characters starting from first position. So you get rid of first two leading zeroes.
Then take first 6 character from the result of above operation from the first character. You get rid off last 2 digits.
Regards
Anindya

AS2 Error: Transport status code: 403

Dear SAP experts,
Currently, our Trading Partner is sending messages to our server via HTTPS, AS2 connection.
Our Trading Partner is getting error, Transport status code: 403.
I've checked our AS2 adapter logs (SAP PI), and it says,
Error in unkown channel: (No session available) >> Error type: LOGICAL_ERROR >> Error date: 1/14/10 7:28 AM >> Description: Inbound communication from ZZ-TRADINGPARTNER to 14-8410240001002 not allowed: com.seeburger.as2.exception.AS2PluginException: Failed to get inbound configuration from DATABASE. [1/14/10 7:28 AM]
TRADINGPARTNER --> Sender ILN (Trading Partner)
8410240001002 --> Receiver ILN (SAP PI - our server)
Kindly advise where the issue resides.
Is it from Trading Partner's configuration?
Thanks very much!
Gerberto

It could be related to missing configuration at your side. Have you created the sender agreement properly? It could be problem with incorrect use of party while creation of sender agreement.
Regards,
Prateek

Which is better transfer routine or update routine???

HI ALL,
I have read some documents, but I didnt get the real concept.
Can any one explain in detail as to how do we decide where to write the code i.e a start routine or transfer routine or update routine...and which one is better for a given scenario..
with example?

My scenario is like this:
master data InfoObject for e.g. Z_MATERIAL1 with 10 fields as attributes. It has two Source Systems feeding it; SAP and a flat file from a system called Product Catalog (PCAT).
The PCAT data is generally more reliable, hence, if a material XYZ comes from PCAT then PCAT is the owner of the material. SAP should not be able to update five critical fields of that material if PCAT owns the material.
For e.g. the below values comes from PCAT and Master data is updated.
PCAT
Material Group Type Price Curr Unit Prod Desc. Lang Class
XYZ      ABC   BRU 10.00 USD PC Inh   To    EN   001
When the data comes from SAP R/3, it should not update anything other than the last 4 fields.
SAP
Material Group Type Price Curr Unit Prod Desc. Lang Class
XYZ      ABC    BRU 20.00 USD BOX In   The    DE   003
Finally the data in the Master Data Object should be as below.
Material Group Type Price Curr Unit Prod Desc. Lang Class
XYZ      ABC   BRU 10.00 USD PC In    The    DE   003
where do i write the code...i have written this in start routine of transfer rules...i want to know the performance issues...

Transfer Routine required

Hi,
I am getting the Alpha Numeric (for example:150DD say)data for the field 0SALESEMPLY into the infosource 2LIS_11_VAHDR, but the data type for 0salesemply is NUMC in the info source.
Because of this data type(NUMC) the data for this filed is loading only the numeric value i.e.,150 only, but not as 150DD into the infocube.
In order to load load as alpha numeric value, i think i need to write Transfer Routine for the 0SALESEMPLY info object in the Transfer rules (in 2LIS_11_VAHDR), there by it can load alpha numeric values for this info object.
So please provide me the Routine which can transfer the alpha numeric data for the existing Data type(NUMC) for the info oblect in the infosource 2LIS_11_VAHDR.
Thanks & Regards,
Kishore

Hi Anil,
I am loading the data from a Flat file where the data , that contributes to the info object 0SALESEMPLY in the the info source 2lis_11_vahdr, in the flat file for the respective field is Alpha Numeric values.
But we have the 0SALESEMPLY (BW) info object with data type Numc which accepts only numeric values.
so it is loading only the numeric values(ex: 150 say) of that field but not the entire alpha numeric value(ex: 150AR, say).
so in this situation how can i proceed.
Please respond asap......
Regards,
Kishore

What is the order of execution of global transfer routine where multiple routines are involved?

Hi,
Suppose we have start routine, transformation routines and end routine defined between datasource and data target, and also we have a global transfer routine created on an infoobject.
What is the order of execution of routines in this scenerio?
Also if conversion routine like ALPHA is defined for an Infoobject, when does this come into flow.?
Please enlighten me.
Thanks,
Akshara

Hello Akshara ,
The sequence of routines are as
1. Start Routine
2. Master Data Look Up or
3. Field Level Routine
4. End Rountine
Apart from this , there is Expert routine, which is used in special cases, when there are not the sufficient functions to perform a transformation. It can be used as a interim solution , and it performs all the functions of Start routine, end routine , field routine.
Note : if you have created transformation, and then created Expert routine, then system will delete all the existing transformations.
Further to this, you can explore more, by debug the transformation as suggested by Vijay Kumar.
Hope this helps !
Regards
YN

SXMB_MONI Error - transportation lane related

I have transferred a PO from R/3 to SNC but I am getting an error in SXMB_MONI. It says 'ShipFromLocation could not be determined from transp. lane'. All products on the PO are present in the transportation lane. Yet the error message says 'Transportation lane(s) not found'.
How do I correct this error?

Even am experiencing the same problem for my new client.
I have checked the following:
1. Transportation Lane available between the Supplier Location and Plant Location
2. Product in PO assigned to the TLane
3. Validity of Tlane is correct
4. Means of Transport assigned to the Tlane
5. Validity of MOT is correct
6. Tlane is in active Model - 000
But still when the PO comes it fails with the error "Transportation lane(s) not found : 071(/SCMB/MDL_BASIC)
Item 00010: ShipFromLocation could not be determined from transp. lane - 042(/SCA/DM_MDCOMP
Transportation lane(s) not found: 071(/SCMB/MDL_BASIC)
Is this got to do with Active Model / Version? If so how to rectify that?
Regards,
Bharath

0LOGSYS transfer routine error transporting DEV- QA

Similar Messages

Maybe you are looking for