What is the order of execution of global transfer routine where multiple routines are involved?

Hi,
Suppose we have start routine, transformation routines and end routine defined between datasource and data target, and also we have a global transfer routine created on an infoobject.
What is the order of execution of routines in this scenerio?
Also if conversion routine like ALPHA is defined for an Infoobject, when does this come into flow.?
Please enlighten me.
Thanks,
Akshara

Hello Akshara ,
The sequence of routines are as
1. Start Routine
2. Master Data Look Up or
3. Field Level Routine
4. End Rountine
Apart from this , there is Expert routine, which is used in special cases, when there are not the sufficient functions to perform a transformation. It can be used as a interim solution , and it performs all the functions of Start routine, end routine , field routine.
Note : if you have created transformation, and then created Expert routine, then system will delete all the existing transformations.
Further to this, you can explore more, by debug the transformation as suggested by Vijay Kumar.
Hope this helps !
Regards
YN

Similar Messages

Statechart Module: What is the order of execution for a parent state and its substates?

Hello,
This page describes the order of execution of transitions and actions for one level of nesting. What about compound states? Do the static reactions of the parent state execute before the transitions of the sub-states?

Hello,
I'm not incredibly familiar with the Statechart module, but I will look into it for you on our internal database. In the mean time, there are some examples that may answer some of your questions here:
https://decibel.ni.com/content/docs/DOC-8716
and here:
http://www.ni.com/white-paper/7425/en
-N
National Instruments
Applications Engineer

Infopath form, one approve button with three rules, what is the order of execution

i have designed a approval form the the "approval" button, it has three rules, one is submit to host, the second is set value to one field, the last one is to close form.
some times, especially when the server is too busy, the first rule execute a long time, at last it seams fail, but the second and the last execute ok.
that is, the workflow status is NOT START, but the value is set and the form is closed.
when the approver open the workflow, the approval form check the stateValue is changed, the form show one "already approvaled" view. but the workflow still NOT START.
i am very confused for this, hope someone give me some advices. thanks all guys!
lixw
i just know what has just happen. i changed some code, and this make some task been locked.
thanks everyone!

Why is the rule for updating a field value is set to execute after form submit? Shouldn't it be prior to submit?
This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

What's the RFC name for BPS to transfer data from one Plan-Area to another?

I created a role for BPS planner.This include all authorization except the RFC authorization for transfering data from one plan-area to another.However, even I set the '*' to the RFC name. Am I missing something? Any suggestion is appreciated.
Best regard,
Gerald He

Hi Vlad,
Thanks for your reply. It's helpful.
Finally, I found that this error message will be pop-up when the authorization is not right. For example, if you don't have right authorization to access the corrsponding InfoCube which the BPS is based on. Now, I find the root cause and fixed this issue.
Best regard,
Gerald

The order of execution (of PL/SQL function calls) changes...why??

select e.EMPID empid,
e.name name,
aatest.SETVALUES(2) z,
aatest.TEST1() b,
aatest.TEST2() x,
aatest.TEST3() y
from emp e
where e.empid = 101
order by e.name;
when I execute this select statement...the order of function calls is as follows:
setvalues 1st (call no:1)
test1 (call no:2)
test2 (call no:3)
test3 (call no:4)
Now...I introduce a join between the two tacles as mentioned in the query
select e.EMPID empid,
e.name name,
e2.deptno deptid,
aatest.SETVALUES(2) z,
aatest.TEST1() b,
aatest.TEST2() x,
aatest.TEST3() y
from emp e, emp2 e2
where e.empid = e2.empid
order by e.name;
The order of execution of function calls changes to
(I observed this using DBMS_OUTPUT.PUT_LINE)
test3 (call no:1)
setvalues 1st (call no:2)
test1 (call no:3)
test2 (call no:4) (the first and last calls swap!)
i.e: it calls the last function in the select statement at the beginning
instead of calling it at the last. Is it the normal behaviour? or whats going on
here?
Can somebody explain me, please....
Details:
the following four functions are defined in a package called 'aatest' and compiled.
aatest.SETVALUES(2)
aatest.TEST1()
aatest.TEST2()
aatest.TEST3()
the Tables EMP and EMP2 are two tables defined in the same schema.

Your "thinking" is wrong here. You can not use the column order to model your program flow. As SQL is set/tupel based, there is no given sequence of the execution order. Otoh you want to have a specific order in wich your functions must be executed otherwise the result will be wrong (or undefined). Thus here you need a procedural approach. This can be done by using PL/SQL for example.
You would code your functions in that way, that they are working correctly independent from the place where they are called ie if function1 needs the setvalues function, this function must be called inside the function1 then.
Are you sure you need all these functions in this procedural approach inside the sql-statement? This is mostly not needed and can be accomplished by using pure SQL. If not, may be your design is broken.

What is the order of restoring backups in sharepoint 2010

Hi
production form has
2 web application ,custom solutions and service applications configured(user profile,serarch)
here what is the order of restoring backups in my newly created test form
adil

Hi
in my production environment when i create new web application how
the custom solution included in _layouts folder?
this is the information from systemsettings>farmsolutions
Name: xyz.scan.wsp
Type: Core Solution
Contains Web Application Resource: Yes
Contains Global Assembly: Yes
Contains Code Access Security Policy: No
Deployment Server Type: Front-end Web server
Deployment Status: Deployed
Deployed To: http://spwf01:81/;
http://spwf01:83/; http://spwf01/;
http://spwf01:84/; http://spwf01:82/
here there is no webapplication with port 85 , but when i create new web application with port 85
this solution exists in _layouts folder
adil

Tracking the order of execution of sql scripts in SQL*Plus

In our production environment we sometimes have to run some .sql scripts in a particular order. Since the order of execution is important , i have created another .sql file caller caller.sql(shown at the bottom) which will call all the scripts in the right order.
i thought of putting a exec DBMS_LOCK.SLEEP (5); after the end of every execution of the script so that i can see the
'Ending script1'message .
The spooling within the caller script(execute_stack.log) has become meaningless because each script has a spool <filename.log> and spool off within it. These spool logs (for every script) is important for tracking purposes as each script belongs to a different development team and i have to send them the spooled log file after the execution.
I don't want to see the entire scripts running by in my screen. Since these scripts have their own spooling, i can later check the logs if the scripts where executed properly.
So i need two things.
1.I just need to see the following and nothing else in the screen.
Ending script1
Ending script2
Ending script3
.2. I need to log the order of execution. ie. the execute_stack.log should look like the above.Since there is a spool off within each script, this wouldn't be possible.Right?
Ending script1
Ending script2
Ending script3
.The caller.sql script which calls all the scripts in the right order
alter session set nls_date_format = 'DD-MON-YYYY hh24:MI:SS';
set serveroutput on
set echo on;
set feedback on;
spool execute_stack.log
@script1.sql
exec dbms_output.put_line ('Ending script1');
dbms_output.put_line(chr(10)||chr(10)||'.'||chr(10)||'.'||chr(10));
exec DBMS_LOCK.SLEEP (5);
@script2.sql
exec dbms_output.put_line ('Ending script2');
dbms_output.put_line(chr(10)||chr(10)||'.'||chr(10)||'.'||chr(10));
exec DBMS_LOCK.SLEEP (5);
@script3.sql
exec dbms_output.put_line ('Ending script3');
dbms_output.put_line(chr(10)||chr(10)||'.'||chr(10)||'.'||chr(10));
exec DBMS_LOCK.SLEEP (5);
@script4.sql
dbms_output.put_line(chr(10)||chr(10)||'.'||chr(10)||'.'||chr(10));
exec dbms_output.put_line ('Ending script3');
commit;
spool off;Is this a professional way of tracking the execution of .sql scripts?

Pete_Sg1 wrote:
Is this a professional way of tracking the execution of .sql scripts?No. There is very little professional about using .sql scripts on a production system - when stored procedures are safer, more robust, easier managed and controlled and secure.. and where a log table can be used to properly log the runtimes (and other stats) of each processing step.
Let's just take a look at the number of moving parts you need to schedule and run a .sql script. A cron job needs to be configured with the proper environment setting. It needs to run a shell script. That shell script needs to load SQL*Plus. SQL*Plus needs to connect to the database (starting a dedicated server process most likely). SQL*Plus then needs to read a .sql file, parse these commands and either execute these locally (SQL*Plus commands) or remotely (PL/SQL and SQL commands).
How can this be considered professional when the very same can be achieved with a
- stored procedure
- using DBMS_JOB to schedule the procedure for execution
There are so many things that can go wrong with the first method. And so few things that could go wrong with the last one. No contest as to which method is not only better, but also professional.
PS. See that you use Windows to run these scripts. It is even worse as it introduces another hardware and software layer making the scenario even more insecure & unsafe with more moving parts that can go wrong or simply fail.

HT4910 documents edited on iphone, ipad, & mac what is the order of creation and editing and must each change be manually initiated to update the icloud

documents edited on iphone, ipad, & mac what is the order of creation and editing and must each change be manually initiated to update the icloud?

No idea what you mean by the firsy part of your question.
Documents edited on the Mac need manually uloading to iCloud at iCloud.com,documents edited on the mobile devices are updated automatically.

What is the order of deletions when a DVR is full

1302 wrote:
My DVR is nearly full and I have a number of items marked for recording in the next two weeks one of which will surely bring DVR to 100% full. What is the order in which the DVR will begin deleting previously recorded programs to make room for latest recordings? Normally, the oldest recordings will be deleted.... with the X1 system DVR, you can select to KEEP for 1 year or select "Space is needed" within the DVR manager.. -=Ray=-

1302 wrote:
My DVR is nearly full and I have a number of items marked for recording in the next two weeks one of which will surely bring DVR to 100% full.
What is the order in which the DVR will begin deleting previously recorded programs to make room for latest recordings?
Sounds like an external hard drive might be something to investigate for your DVR.
Some details at the links below:
http://customer.xfinity.com/help-and-support/cable-tv/external-dvr-storage/
http://store.comcast.com/my-book-av-dvr-expander/detail.php?p=442589&v=comcast_accessories

What is the order of OS updates needed-?

What is the order of OS updates needed to get to the most current OS? I currently am running 10.7.5 Also, I've tried looking for the OS updates, but only seem to find updates and not the whole OS i.e.: 10.8 and 10.9 Thanks!

The following has instructions: https://www.apple.com/osx/how-to-upgrade/

What is the order of starting the services?

Hi,
I have 2 node RAC with ASM. what is the order of starting the services like crs, asm,nodeapps, db, ,listener?
can you help me?
Thanks

The basic steps are asm, crs, db, listener, nodeappsTypo there? First CRS then ASM.
Also, if you are running ocfs2, then the very 1st step would be ocfs2 (if your voting and OCR disks are on a ocfs2 volume, it needs to mount before CRS can start).

What is the difference in execution time between a program written in C language and the same program made with LabView?

what is the difference in execution time between a program written in C language and the same program made with LabView?

Hi Pepe
You cannot say which is faster, the LV or the C programm. The only way to be sure is to program in both environments and to check than. Check this for some benchmark examples:
http://zone.ni.com/devzone/conceptd.nsf/webmain/DC9B6DD177D91D6286256C9400733D7F?OpenDocument&node=200059
Luca
Regards,
Luca

What is the order in which implementaions of a BADI be executed??

Hi Frnds,
If i have more than one implementation for a BADI, what is the order in which they will be executed.
Regards,
Navin.

Hi,
abt <b>enhancement ponts</b> in simple language
They are POINTS in standard sap program
(eg. Before Saving data, Before Displaying Data)
where some other BADI/Include/Form
is called.
In this called badi/include/form,
the customer can write his own code
eg. for validation purpose etc.
2. By doing so,
the standard sap program need not be changed.
Only the badi/fm/include/form
needs to be changed.
Enhancement-Point is a part of the new enhancement framework. He is some lite reading.
http://help.sap.com/saphelp_nw2004s/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
Please check this blogs and wiki as well.
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/thenewEnhancementFrameworkandthenewkernel-basedBAdI&
REgards

HT4914 I purchased iMatch because my old computer was failing and I was afraid of losing my music library. Now I bought a new laptop; what is the best way for me to transfer my library to my new laptop? Will iMatch help me do this?

I purchased iMatch because my old computer was failing and I was afraid of losing my music library. Now I bought a new laptop; what is the best way for me to transfer my library to my new laptop? Will iMatch help me do this?

Is/was failing or has failed?
If the old computer still runs one of these methods may be best.
Method 1
Backup the library with this User Tip.
Restore the backup to your new computer using the same tool used to back it up.
Deauthorize the old computer if you no longer want to access protected content on it.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
I'd recommend method 1 since it establishes an ongoing backup for your library.
I don't have personal experience with iTunes Match, but in principle you should be able to download all the tracks currently registered to your iTunes Match account. This isn't quite the same as restoring your previous library exactly as it was. There is always the potential for iTunes match to provide the wrong version of a song and could be content such as movies, podcasts, audiobooks etc. that would have been excluded.
tt2

Where/what is the app to click on to transfer music from the computer to the iphone?

Where/what is the app to click on to transfer music from the computer to the iphone?

Hi,
Go menu / view and select show sidebar. This will allow you to see attached devices.
Jim

What is the order of execution of global transfer routine where multiple routines are involved?

Similar Messages

Maybe you are looking for