AS2 Error: Transport status code: 403

Dear SAP experts,
Currently, our Trading Partner is sending messages to our server via HTTPS, AS2 connection.
Our Trading Partner is getting error, Transport status code: 403.
I've checked our AS2 adapter logs (SAP PI), and it says,
Error in unkown channel: (No session available) >> Error type: LOGICAL_ERROR >> Error date: 1/14/10 7:28 AM >> Description: Inbound communication from ZZ-TRADINGPARTNER to 14-8410240001002 not allowed: com.seeburger.as2.exception.AS2PluginException: Failed to get inbound configuration from DATABASE. [1/14/10 7:28 AM]
TRADINGPARTNER --> Sender ILN (Trading Partner)
8410240001002 --> Receiver ILN (SAP PI - our server)
Kindly advise where the issue resides.
Is it from Trading Partner's configuration?
Thanks very much!
Gerberto

It could be related to missing configuration at your side. Have you created the sender agreement properly? It could be problem with incorrect use of party while creation of sender agreement.
Regards,
Prateek

Similar Messages

HTTP Error with Status code 403 when using ABAP Server Proxies

Hi All,
I have been working on ABAP Client and Server proxies in my project. The weblogs by Ravikumar, Prateek Shah, Siva Maranani & VijayaKumari were very helpful and thank them all for just helpful and guiding postings.
Interfaces using Client proxies are working fine and have been tested successfully. But I'm facing bit problems with Server Proxies. The scenario is of File to SAP system via XI. Data is coming correct up to Technical routing in pipeline but at call adapter(for Server Proxy to SAP)in XI pipeline I receive Error:
HTTP response contains status code 403 with the description Business Server Page (BSP) Error Error when sending by HTTP (error code: 403, error text: Business Server Page (BSP) Error)
Previously I was receiving authentication and authorization related error of status code 401 and then in communication channel I replaced user profile with a user id having role SAP_XI_APPL_SERV_USER. The basis peron has created new user id with role SAP_XI_APPL_SERV_USER only and that I'm using. I've tried creating a HTTP destination with the created user id and in test connection too receive same error message.
Please help me out with your inputs and understanding on the topic.
Thanks and Best Regards
Prashant Rajani

Hi Prashant,
Please take a look at these threads..They deal with the same problem, and they have been resolved here.
BSP Authorization error
Service cannot be reached . error code 403 the reason forbiddn
403 Error when accessing the server
Hope your issue gets resolved.
cheers,
Prashanth
P.S Please mark helpful answers

Failed to receive ccm message responce. Status code = 403

So as the title suggests Im having client problems installation problems on some machines.
Looking at a clients ccmsetup.log I have this throughout the log:
Failed to receive ccm message response. Status code = 403
GetDPLocations failed with error 0x80004005
Failed to find DP locations with error 0x80004005, status code 403. Check next MP.
Only one MP HTTP://sccm2012.XXX.XXX.ca is specified. Use it.
Have already tried all MPs. Couldn't find DP locations.
GET 'HTTP://sccm2012.XXX.XXX.ca/CCM_Client/ccmsetup.cab'
Failed to successfully complete WinHttp request. (StatusCode at WinHttpQueryHeaders: 403)
DownloadFileByWinHTTP failed with error 0x80004005
A Fallback Status Point has not been specified. Message with STATEID='308' will not be sent.
CcmSetup failed with error code 0x80004005
The machine I am focusing on to troubleshoot has been reachable in the past. (80% sure of that)
The PC no longer exists in my SCCM/devices, and it looks like it has never been. I have tried running "ccmsetup.exe /MP:
HTTPS://SCCM2012.domain.local SMSSITECODE
= SC12 /UsePKICer"
as well as "ccmsetup.exe /MP:sccm2012.domain.ca /BITSPriority:low SMSSITECODE=XXX fsp=sccm2012.XXX.XXX.ca
checking my MP_Location.log i get this:
retreiving the certificates
UID not found
UID not found
UID not found
UID not found
UID not found
UID not found
UID not found
UID not found
UID not found
MP_GetAssignedMPListForSite (XXX.XXX.ca,YYY.YYY.ca,601)
MP_GetProxyMPListForSite XXX.XXX.ca,YYY.YYY.ca,<ClientLocationInfo OnInternet="0"><ADSite Name="Default-First-Site-Name"/><Forest Name="XXX.XXX.ca,"/><Domain Name="XXX.XXX.ca,"/><IPAddresses><IPAddress
SubnetAddress="132.147.0.0" Address="132.147.161.131"/><IPAddress SubnetAddress="2002:8493:A183:0000" Address="2002:8493:A183:0000:0000:0000:8493:A183"/></IPAddresses></ClientLocationInfo>)
MP_GetLocalMPListForSite (XXX.XXX.ca,YYY.YYY.ca,<ClientLocationInfo OnInternet="0"><ADSite Name="Default-First-Site-Name"/><Forest Name="XXX.XXX.ca,"/><Domain Name="XXX.XXX.ca"/><IPAddresses><IPAddress
SubnetAddress="132.147.0.0" Address="132.147.161.131"/><IPAddress SubnetAddress="2002:8493:A183:0000" Address="2002:8493:A183:0000:0000:0000:8493:A183"/></IPAddresses></ClientLocationInfo>)
Im not familiar with that log, so im not sure if that's normal. But through troubleshooting I was looking at all my MP logs.
MPControl.log says "successfully performed management point availability check against local computer".
MP_RegistrationManager.log says "Registration hint is expired".
CCMValidateAuthHeaders failed (0x87d0029b) to validate headers for client 'GUID:FE2F4DCF-0C30-4765-9CB8-70603FD423BF'.
Im at a loss as to what is broken. no alerts are popping up in Sccm.
D.L.J. Schneider

Sorry for the Delay, my time was spent on other things yesterday.
This is the contents of my ClientIDManagerStartup.log The bold are errors.
Begin to select client certificate
Begin validation of Certificate [Thumbprint 468E32A8A58180850AA200877AD061B5A2BCB2B0] issued to 'SCCM2012.XXX.XXX.ca'
Completed validation of Certificate [Thumbprint 468E32A8A58180850AA200877AD061B5A2BCB2B0] issued to ''SCCM2012.XXX.XXX.ca'
>>> Client selected the PKI Certificate [Thumbprint 468E32A8A58180850AA200877AD061B5A2BCB2B0] issued to 'SCCM2012.XXX.XXX.ca'
Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
DateTime = "20140826043631.676000+000";
HRESULT = "0x00000000";
ProcessID = 12300;
ThreadID = 8272;
Failed to submit event to the Status Agent. Attempting to create pending event.
Raising pending event:
instance of CCM_ServiceHost_CertRetrieval_Status
DateTime = "20140826043631.676000+000";
HRESULT = "0x00000000";
ProcessID = 12300;
ThreadID = 8272;
Client PKI cert is available.
Initializing registration renewal for potential PKI issued certificate changes.
Succesfully intialized registration renewal.
[RegTask] - On co-located client and site role. Posting async registration task.
[RegTask] - Co-located with site role. Waiting for full service startup before registering.
Read SMBIOS (encoded): 55005300450032003000390057004B004E003600
Evaluated SMBIOS (encoded): 55005300450032003000390057004B004E003600
No SMBIOS Changed
SMBIOS unchanged
SID unchanged
HWID unchanged
Raising pending event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SMS_RemoteClient_ClientIdUpdated
ClientID = "GUID:75B97CFC-57E4-4170-B64F-A85FFC8692A3";
DateTime = "20140826043637.343000+000";
MachineName = "SCCM2012";
NewClientId = "GUID:75B97CFC-57E4-4170-B64F-A85FFC8692A3";
PreviousClientId = "GUID:75B97CFC-57E4-4170-B64F-A85FFC8692A3";
ProcessID = 12300;
ThreadID = 13824;
GetSystemEnclosureChassisInfo: IsFixed=FALSE, IsLaptop=FALSE
Windows To Go requires a minimum operating system of Windows 8
Computed HardwareID=2:6CF3F4FDA34F74D84B580D7265933FCD8EE38752
Win32_SystemEnclosure.SerialNumber=<empty>
Win32_SystemEnclosure.SMBIOSAssetTag=<empty>
Win32_BaseBoard.SerialNumber=<empty>
Win32_BIOS.SerialNumber=USE209WKN6
Win32_NetworkAdapterConfiguration.MACAddress=00:17:A4:77:FC:2C
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:6CF3F4FDA34F74D84B580D7265933FCD8EE38752
HardwareID2=1EBA0600010000F4
8/26/2014 12:36:37 AM 13824 (0x3600)
[RegTask] - Service has started, continuing registration.
Read SMBIOS (encoded): 55005300450032003000390057004B004E003600
Evaluated SMBIOS (encoded): 55005300450032003000390057004B004E003600
No SMBIOS Changed
SMBIOS unchanged
SID unchanged
HWID unchanged
RegTask: Failed to refresh site code. Error: 0x80041010
Sleeping for 298 seconds before refreshing location services.
The clientlocation log was clean. and the locationservices.log contains:
Security settings update detected, restarting CcmExec.
8/21/2014 12:03:12 PM 10452 (0x28D4)
Failed to create CcmRestart process. (193)
8/21/2014 12:03:12 PM
10452 (0x28D4)
Failed to process security mode transition. (0x800700c1)
8/21/2014 12:03:12 PM
10452 (0x28D4)
Current AD site of machine is Default-First-Site-Name
8/21/2014 12:03:13 PM 9904 (0x26B0)
Current AD site of machine is Default-First-Site-Name
8/21/2014 12:08:13 PM 10452 (0x28D4)
Security settings update detected, restarting CcmExec.
8/22/2014 12:37:53 AM 11616 (0x2D60)
Failed to create CcmRestart process. (193)
8/22/2014 12:37:53 AM
11616 (0x2D60)
Failed to process security mode transition. (0x800700c1)
8/22/2014 12:37:53 AM
11616 (0x2D60)
Security settings update detected, restarting CcmExec.
8/24/2014 12:37:37 AM 14784 (0x39C0)
Failed to create CcmRestart process. (193)
8/24/2014 12:37:37 AM
14784 (0x39C0)
Failed to process security mode transition. (0x800700c1)
8/24/2014 12:37:37 AM
14784 (0x39C0)
Security settings update detected, restarting CcmExec.
8/25/2014 12:37:44 AM 8636 (0x21BC)
Failed to create CcmRestart process. (193)
8/25/2014 12:37:44 AM
8636 (0x21BC)
Failed to process security mode transition. (0x800700c1)
8/25/2014 12:37:44 AM
8636 (0x21BC)
Security settings update detected, restarting CcmExec.
8/26/2014 12:37:49 AM 12012 (0x2EEC)
Failed to create CcmRestart process. (193)
8/26/2014 12:37:49 AM
12012 (0x2EEC)
Failed to process security mode transition. (0x800700c1)
8/26/2014 12:37:49 AM
12012 (0x2EEC)
D.L.J. Schneider

HTTP response contains status code 403 with the description Forbidden

Hello all,
I have configured a simple scenario like this:
File ftp Adapter -> XI -> File ftp Adapter
I activate the communication channel to start the message processing. Then I am able to see my messages in transaction SXMB_MONI in the XI Integration server but I get the error message mentioned in the subject of this thread.
When I look at the message processing details I got the following informtion in Call Adapter -> SOAP Header -> Error:
<?xml version="1.0" encoding="utf-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
    <SAP:Category>XIServer</SAP:Category>
    <SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
    <SAP:P1>403 </SAP:P1>
    <SAP:P2>Forbidden</SAP:P2>
    <SAP:P3/>
    <SAP:P4/>
    <SAP:AdditionalText>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0 Transitional//EN&quot;&gt;
          &lt;html&gt;
          &lt;head&gt;
          &lt;title&gt;Error Report&lt;/title&gt;
          &lt;style&gt;
          td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
          A:link
          A:visited
          A:active
          &lt;/style&gt;
          &lt;/head&gt;
          &lt;body marginwidth=&quot;0&quot; marginheight=&quot;0&quot; leftmargin=&quot;0&quot; topmargin=&quot;0&quot; rightmargin=&quot;0&quot;&gt;
          &lt;table width=&quot;100%&quot; cellspacing=&quot;0&quot; cellpadding=&quot;0&quot; border=&quot;0&quot; align=&quot;left&quot; height=&quot;75&quot;&gt;
          &lt;tr bgcolor=&quot;#FFFFFF&quot;&gt;
         &lt;td align=&quot;left&quot; colspan=&quot;2&quot; height=&quot;48&quot;&gt;&lt;font face=&quot;Arial, Verdana, Helvetica&quot; size=&quot;4&quot; color=&quot;#666666&quot;&gt;&lt;b&gt;&amp;nbsp;&amp;nbsp;403 &amp;nbsp Forbidden&lt;/b&gt;&lt;/font&gt;&lt;/td&gt;
          &lt;/tr&gt;
          &lt;tr bgcolor=&quot;#3F73A3&quot;&gt;
         &lt;td height=&quot;23&quot; width=&quot;84&quot;&gt;&lt;img width=1 height=1 border=0 alt=&quot;&quot;&gt;&lt;/td&gt;
         &lt;td height=&quot;23&quot;&gt;&lt;img width=1 height=1 border=0 alt=&quot;&quot;&gt;&lt;/td&gt;
         &lt;td align=&quot;right&quot; height=&quot;23&quot;&gt;&lt;font face=&quot;Arial, Verdana, Helvetica&quot; size=&quot;2&quot; color=&quot;#FFFFFF&quot;&gt;&lt;b&gt;SAP J2EE Engine/6.40&amp;nbsp;&lt;/b&gt;&lt;/font&gt;&lt;/td&gt;
          &lt;/tr&gt;
          &lt;tr bgcolor=&quot;#9DCDFD&quot;&gt;
         &lt;td height=&quot;4&quot; colspan=&quot;3&quot;&gt;&lt;img width=1 height=1 border=0 alt=&quot;&quot;&gt;&lt;/td&gt;
          &lt;/tr&gt;
          &lt;/table&gt;
          &lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;
          &lt;p&gt;&lt;font face=&quot;Arial, Verdana, Helvetica&quot; size=&quot;3&quot; color=&quot;#000000&quot;&gt;&lt;b&gt;&amp;nbsp;&amp;nbsp;You are not authorized to view the requested resource.&lt;/b&gt;&lt;/font&gt;&lt;/p&gt;
          &lt;p&gt;&lt;font face=&quot;Arial, Verdana, Helvetica&quot; size=&quot;2&quot; color=&quot;#000000&quot;&gt;&lt;table&gt;&lt;tr&gt;&lt;td valign=&quot;top&quot;&gt;&lt;b&gt;&amp;nbsp;Details:&lt;/b&gt;&lt;/td&gt;&lt;td valign=&quot;top&quot;&gt;&lt;PRE&gt;No details available&lt;/PRE&gt;&lt;/font&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;&lt;/font&gt;&lt;/p&gt;
          &lt;/body&gt;
          &lt;/html&gt;
</SAP:AdditionalText>
    <SAP:ApplicationFaultMessage namespace=""/>
    <SAP:Stack>HTTP response contains status code 403 with the description Forbidden
          XML tag Envelope missing in SOAP message header (SAP XI Extension)
</SAP:Stack>
    <SAP:Retry>M</SAP:Retry>
</SAP:Error>
Does anyone have a hint for me how to solve this issue?
Thanks in advance
Fabian

Hi,
This error may be because of Inactive Services in internet communication framework-
Go to SICF transaction and activate the services. Have a look into SAP note-517484
SO because of huge message this may be the reason.
Hope this helps,
Regards,
Moorthy

Lync 2013 Clients in Child Domain Log "The server returned HTTP status code '403 (0x193)' with text 'Forbidden'."

Hey All, I am really stumped on this one.
Environment - Is using split DNS
Forest Root Domain - Contains new Lync 2013 Server Standard, ADDS, DNS, Enterprise CA, Workstations
Clients in this domain connect and work beautifully. No errors.
Child Domain - ADDS, DNS, Workstation, Lync 2013 client
Client autodiscovers, and then asks for a password. Enter the password and this comes up...
Can't sign in to Lync, You didnt get signed in, It might be your sign-in address or logon credentials.. blah blah blah"
Client log shows
Error:
There was an error communicating with the endpoint at 'https://domainlync13srv.Domain.net/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '403 (0x193)' with text 'Forbidden'.
The server understood the request, but cannot fulfill it.
As far as i can tell certificates are correctly configured with all the SAN's possible in my forest. The user is correctly set up in Lync control panel. Autodiscovery seems to be working as it should. EWS is working correctly.
Repaired client, removed cached creds, has all lync 2013 updates no dice
Thank you all!

I am an IDIOT.
I did not prepare the child domain with the LYNC setup tool. Logged on to a file server in the child domain with domain admin rights and sure enough the setup said the domain was "partial". Ran the setup and bam it all started working.

Receiver XI adapter error :HTTP Status Code 200 during Reponse Parsing

Hi Exeprts,
My Scenario is mail to ABAP proxy , I have got the bellow error in moni while testing my secnario .
Please help me reslove this .
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">OK_BUT_NO_XI_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP Status Code 200 Received But Error During Response Parsing: No XI Response Received XML element Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Regards
Upendra

Hi Mark ,
No error message in attachement . only it daisplay the following information
SAP Library
SAP Library contains the complete documentation for SAP NetWeaver Application Server Java. You can access it by choosing SAP NetWeaver.
      SAP NetWeaver Administrator
A powerful administration, configuration and monitoring tool, which bundles key administrative tasks to keep your SAP NetWeaver system landscape running. SAP NetWeaver Administrator can be used in a central or local scenario. Here you access the local NetWeaver Administrator.
    System Information
System information provides administrators with an overview of the system configuration and its state. It shows all of the system's instances and processes, their current state and important parameters (such as ports) that may be required for support cases, as well as the versions of the components installed.
      Services Registry
The Services Registry is a UDDI based registry that contains definitions of enterprise services and references to their metadata.
   User Management
The user management administration console provides administrators with the functions they need to manage users, groups, roles, and user-related data in the User Management Engine (UME). Users without administrator permissions can use it to change their user profile.
      UDDI Client
The UDDI client provides query and publishing functions for UDDI entities to any UDDI compliant registry.
   Web Services Navigator
Web Services Navigator is a tool that gives you a short overview of a specific Web service based on its WSDL, and enables you to test your Web service by creating and sending a client request to the real end point.
      Web Dynpro
Web Dynpro is a User Interface technology available within the SAP NetWeaver Developer Studio.
Various Web Dynpro tools provide administrators and application developers with performance measurement and application administration capabilities. The Web Dynpro runtime is already deployed.
Regards
Upendra

Proxy error - HTTP status code 500

Hi,
Scenario: Asynchronous Proxy (R/3 4.7) to 3rd Party (JDBC)
We applied patches to JAVA on the XI side to fix a bug, the process worked before the patches. I am now getting an error on R/3 i.e. the data is not reaching XI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<SAP:Context />
<SAP:Code p1="500" p2="Error during conversion of XI message" p3="" p4="">HTTP.HTTP_STATUS_CODE_NEQ_OK</SAP:Code>
<SAP:Text language="EN">HTTP status code 500 : Error during conversion of XI message</SAP:Text>
</SAP:ErrorHeader>
Any ideas. Thanks,
Leanne

Hi,
SAP requested we implement patches, this sorted out the proxy issue. The message now arrives in XI.
I have now encountered another problem, this process was working prior to the patches being implemented. I noticed that the communication channels now look different, any ideas?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: JDBC Adapter configuration not initialized: null</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks,
Leanne

Test published web service experiment error with Status Code 400

I have created an experiment in Azure ML Studio free version that works perfectly in Azure ML Studio when running. After the web service publication I am presented with the following error when I call a test for my web service.
5: Error 0085: The following error occurred during script evaluation, please view the output log for more information: ---------- Start of error
message from Python interpreter ---------- data:text/plain,Caught exception while executing function: Traceback (most recent call last): File "\server\InvokePy.py", line 98, in executeScript outframe = mod.azureml_main(*inframes) File "\temp\azuremod.py",
line 55, in azureml_main File "C:\pyhome\lib\site-packages\pandas\core\indexing.py", line 119, in setitem self._setitem_with_indexer(indexer,
value) File "C:\pyhome\lib\site-packages\pandas\core\indexing.py", line 438, in _setitem_with_indexer raise ValueError('Must have equal len keys and value ' ValueError: Must have equal len keys and value when setting with an iterable ---------- End
of error message from Python interpreter ----------, Error code: ModuleExecutionError, Http status code: 400, Request id: 2c22cced-a109-4e12-856e-455a90644e68, Timestamp: Thu, 23 Apr 2015 10:28:12 GMT
The input data for the test are:
userID = "U5000"
restaurant = "resA"
rating=1
These data are exactly the saame data that my experiment takes as input in Azure ML Studio running mode. My experiment is consisted of 2 python scripts and one meta data editor. The first python script reads the input data, calculates and feeds them into
the metadata editor and the metadata editor feeds the result into the second python script. The second python script module code is very simply and just pivots the data fed:
import pandas as pd
def azureml_main(dataframe1):
newtable = pd.pivot_table(dataframe1, index="restaurant", columns='userID', values="rating")
return newtable,
I cannot understand what is the error and why it is not raised during the running proccess but it is rised during the testing web service proccess. I should note here that when I use only one python script module the above error is not raised in the web
service call. Waiting for your response
Thank you very much.

Related to
https://social.msdn.microsoft.com/Forums/azure/en-US/ff40b046-a7bb-4718-bedc-4260ef95d8d7/test-web-service-published-returns-error-code-internalerror-http-status-code-500?forum=MachineLearning
Thanks for the feedback. This is a known issue. We are working on it. Sorry for the inconvenience.
Luis Cabrera. Program Manager -- Azure Machine Learning @luisito_cabrera Disclaimer: This post is provided &quot;AS IS&quot; with no warranties, and confer no rights.

AS2 Error 403 Forbidden

Hello,
We have a change in IP at our end and hence asked our partners to adjust the same at their end.
They have confirmed that they are using the new IP now (URL is same) and it is activated on their firewall.(Only one partner has this problem,others can send messages to us using new IP)
Still,they are not able to send anything to us and get 403 forbidden error.
They are able to receive messages from us.
We have confirmed,there is no change in AS2 IDs,Message subjects at their end and XI configuration(sender agreement,etc) at our end.
This scenario used to work fine till we had this IP change at our end.
Kindly let me know what could be wrong ?
Thanks.
Regards,
Shweta

Hello Prateek,
Please find below the reply from them:
Yesterday we received a mail from you asking us to change your IP address
abc.com 123.45.67.89 to the new address 123.45.67.87
We changed this IP address in our system but we were not able to connect to your AS2 system via this IP
After that we received a mail from you that we are still sending via the old IP address.
We checked our system again and tried to send with the new IP address.
We received an error from the your AS2 system.
Error sending document over http to host [http://abc.com/SeeburgerAS2/AS2Server], status code [403], reason [Forbidden], response from server [<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-US" lang="en-US">
*<head> *
After checking our firewall and trying to send the data again we received the same error
We decided to switch back to the old situation but we received the same error again.
So currently we are not able to sent any data to you
However we are able to receive data from you
What can we check further?
Thanks.
Regards,
Shweta

Error code 403 in Java Server Proxy

Hi All,
I developed Java Server Proxy.
1. I get the Generated files from IR.
2. Implement those files in J2EE Application.
3. Configure all .xml configuration files.
4. Deploy the .ear file.
5. Register the Bean in JPR registry.
finally i put the file in source side then the file picked successfully.
I checked in Message Monitor i got success message but I Checked in SXMB_MONI then i got the following error .
ERROR:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>403</SAP:P1>
<SAP:P2>Forbidden</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <title>Error Report</title> <style> td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="4" color="#666666"><b> 403 &nbsp Forbidden</b></font></td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img width=1 height=1 border=0 alt=""></td> <td align="right" height="23"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SAP J2EE Engine/7.00 </b></font></td> </tr> <tr bgcolor="#9DCDFD"> <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td> </tr> </table> <br><br><br><br><br><br> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><b> You are not authorized to view the requested resource.</b></font></td> </tr> <tr bgcolor="#FFFFFF"> <td align="left" valign="top" height="48"><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><b> Details:</b></font></td> <td align="left" valign="top" height="48"><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><pre> No details available</pre></font></td> </tr> </body> </html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 403 with the description Forbidden Error while sending by HTTP (error code: 403, error text: Forbidden)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please give me the sloution.
Thanks,
Bharathiraja R

Hi
Look into this blog where you have solutions for all Errors.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Error: HTTP 403 Forbidden
Description: The server understood the request, but is refusing to fulfill it
Possible Tips:
Path sap/xi/engine not active
HTTP 403 during cache refresh of the adapter framework - Refer SAP Note -751856
Because of Inactive Services in ICF Go to SICF transaction and activate the services. Refer SAP Note -517484
Error in RWB/Message Monitoring- because of J2EE roles Refer SAP Note -796726
Error in SOAP Adapter - "403 Forbidden" from the adapter's servlet. Because of the URL is incorrect or the adapter is not correctly deployed.
Reward points if usefull..........

What does "status code error" mean when trying to sign into the APP Store?

APP Store
When trying to install a free APP (Duplicate Cleaner for iPhoto) I receive this error message "Status Code Error" and it does not let me proceed. What does this mean? and How can I proceed?

Apple’s having trouble with the iTunes Store servers right now. Wait for them to resolve the issue.
(123888)

ADF Mobile: HTTP Status Code 500 Internal Server Error

Hi,
I wrote a SOAP web service and deployed it to my standalone ADF Server. I tested it with the HTTP Analyzer, works great. I used it in a Web Service Data Control in normal ADF Web - works perfect. It returns a table of data as programmed. However, ADF Mobile gives me errors: "Http Status Code 500 Internal Server Error: The server encountered an unexpected condition which prevented it from fulfilling the request".
I developed an ADF Mobile interface with an amx page. I created the same Web Service Data Control and created a List View based on the data control. The error pops up every single time, both on iOS simulator and Android Simulator.
I know the simulators have network access to the web services - because i can open the web service test page and WSDL from both simulator's internet browsers.
I know the web services are running - because my ADF Web application can access it.
Any ideas?
Thank you!
-Gavin

Thanks for the reply. There were no errors in my WLS server. However, I will add some statements to my web service to write to the log file. That way i can see if or at what point is the web service is being accessed by the mobile app.
Thanks,
Gavin

Test web service published returns Error code: InternalError, Http status code: 500

Further invastigating ther error mentioned here:
https://social.msdn.microsoft.com/Forums/azure/en-US/14afa50f-287d-4158-852a-c9532f9f30eb/test-published-web-service-experiment-error-with-status-code-400?forum=MachineLearning
I have made an even simpler experiment with two python scirpt modules. The experiment again runs fine in Azure ML Studio but fails in the web service test with the error
Error code: InternalError, Http status code: 500, Request id: 53eef674-190a-4f63-bdc6-a072a45a9c72, Timestamp: Fri, 24 Apr 2015 09:30:37 GMT
The experiment consists only of two python script modules. The code of the first module:
import numpy as np
import pandas as pd
def azureml_main(dataframe1 = None, dataframe2 = None):
dataframe1.loc[1] = ["U5000","resB",np.nan]
dataframe1.loc[2] = ["U5000","resC",2]
dataframe1.loc[3] = ["U5000","resD",2]
dataframe1.loc[4] = ["U5000","resE",np.nan]
dataframe1.loc[5] = ["U6000","resA",np.nan]
dataframe1.loc[6] = ["U6000","resB",1]
dataframe1.loc[7] = ["U6000","resC",2]
dataframe1.loc[8] = ["U6000","resD",np.nan]
dataframe1.loc[9] = ["U6000","resE",1]
dataframe1['hasRated'] = pd.Series(1, index=dataframe1.index).astype(bool)
df_new = pd.DataFrame()
df_new = pd.DataFrame(dataframe1[["restaurant","rating","hasRated"]])
return df_new,
The code of the second module that takes as input the result of the first module:
def azureml_main(dataframe1 = None, dataframe2 = None):
return dataframe1,
A url of a screenshot taken from the experiment.
http://i.imgur.com/4nrbneA.png
Please respond. Again I am using a free workspace of Azure ML Studio.
Thank you very much

Thank you for your quick reply.
I hope you will be able to resolve this issue soon.
asavvopoulos

Status Code: 404 Not Found

Hi,
I have created simple REST Full services. It would validate the data and send it into a Queue. I have added a REST Client add-on's to my Mozilla browser . I got the following error when i test the rest full web services through Rest client .
Status Code: 404 Not Found
Content-Length: 1164
Content-Type: text/html; charset=UTF-8
Date: Mon, 08 Jul 2013 16:22:41 GMT
X-ORACLE-DMS-ECID: a26c3ae948dcd922:28156ab0:13fbd9dc11f:-8000-00000000000001fc
X-Powered-By: Servlet/2.5 JSP/2.1
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
<HTML>
<HEAD>
<TITLE>Error 404--Not Found</TITLE>
</HEAD>
<BODY bgcolor="white">
<FONT FACE=Helvetica><BR CLEAR=all>
<TABLE border=0 cellspacing=5><TR><TD><BR CLEAR=all>
<FONT FACE="Helvetica" COLOR="black" SIZE="3"><H2>Error 404--Not Found</H2>
</FONT></TD></TR>
</TABLE>
<TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=white><FONT FACE="Courier New"><FONT FACE="Helvetica" SIZE="3"><H3>From RFC 2068 <i>Hypertext Transfer Protocol -- HTTP/1.1</i>:</H3>
</FONT><FONT FACE="Helvetica" SIZE="3"><H4>10.4.5 404 Not Found</H4>
</FONT><P><FONT FACE="Courier New">The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.</p><p>If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.</FONT></P>
</FONT></TD></TR>
</TABLE>
</BODY>
Can anyone Help me out. I was struck here
Thanks,
Viswas
</HTML>

Issue has been resolved. There is no tric. My suggestion is before going to test any rest full service over the browser, If we test at sb console level at least we can trace the error.
you may get this fault when your web service has any syntax problem or validation problem or condition failing .so we can get this problem...
Thanks,
Viswas

Lync 2013 Logon Failing (HTTP status code 500) No valid security token

Hello there,
I'm in the process of deploying Lync 2013. I have the pool deployed and everything is at least running. I can access the control panel and provision users. However when I try to logon to the Lync Client I get a DNS error. The DNS
error appears to be misleading and is a result of the earlier auto-detection methods failing.
However using the Lync Connectivity Analyzer I get a "No valid security token." error. This doesnt matter if I use auto-detection or manual pointing the Connectivity Analyzer to the pool servers.
[3/2/2015 9:34:15 AM] [ERROR] Reason: Internal server error (HTTP status code 500)
[3/2/2015 9:34:15 AM] [ERROR] Ms-Diagnostics-Fault ErrorId: 28020, Reason: No valid security token.
[3/2/2015 9:34:15 AM] [CRITICAL] The credentials were not authorized by the server. Please verify your login credentials and try again.
[3/2/2015 9:34:15 AM] [DEBUG] System.Exception: Exception of type 'System.Exception' was thrown.
at Microsoft.LyncServer.WebServices.WebTicketManager.WTExceptions(String exText)
at Microsoft.LyncServer.WebServices.WebTicketManager.<AcquireTicketAsync>d__19.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.WebTicketManager.<AcquireOpaqueTicketAsync>d__14.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<AuthenticationRequired>d__2a.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<ParseResponse>d__16.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Im a bit stumped where to go next.
Thanks.

Manually entering the server also fails and does not provide much to help "We're having trouble connecting to the server. If this continues, please contact your support team."
I found that each time I try to logon it generates a Schannel Error on the server. "A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 51.
The Windows SChannel error state is 1106."
There seems to be a lot more information on that than the previous "Internal Error" message I was trying to deal with.
https://social.technet.microsoft.com/Forums/office/en-US/41718327-203f-445f-8657-87b0a8545ead/lync-2013-client-signin-issue-with-lync-2013-server?forum=lyncprofile
Actually I just found the Lync Server Front-End is stuck "starting" so that would explain why I cannot login. However I re-issued my certificate to make sure the primary CN matched "lync.domain.tld" and it still wont start.
https://expertslab.wordpress.com/2014/04/23/lync-server-2013-front-end-service-stuck-on-starting/
I think my problem is the certificate. I have been trying to use selfSSL7 to generate the certificate for testing but it does not support creating SAN entries so I have entered all the FQDNs as CN entries.
Im going to get another method to generate the self-signed certificate for testing.

AS2 Error: Transport status code: 403

Similar Messages

Maybe you are looking for