0VENDOR_TEXT - Loading

I got an error message while loading Master data for 0VENDOR_TEXT
Runtime Errors         TYPELOAD_NEW_VERSION
Date and Time          12/11/2008 17:24:02
Short text                 A newer version of data type "/BIC/B0000139000" was found than one required
Thanks and any help is greatly appreciated.

Hi,
Seems some issue with the PSA of the object or the DSO in which you are loading.
Try to activate the object again...do some dummy changes activate it and then remove it and reactivate it.
it should work after 2-3 trials
If nothing works then you can use SE14 to reactivate and adjust the table /BIC/B0000139000.
Dont use the option delete in any case.
Thanks
Ajeet

Similar Messages

Steps to Load TEXTS 0VENDOR

Hi BW Gurus
I am new to BI and would like to have steps / procedures on how to load TEXTS 0VENDOR -( I think is Master Data )
if possible in the following order
1.
2.
3.
etc etc etc .
Many Thanx in Advance

Hello;
1. In ECC run RSA5 and fiind 0VENDOR_TEXT
2. Activate it
3. Go to BW -> RSA1 -> Datasources -> Find MM-IO
4. Right button -> replicate (the datasource should be available when replication finished)
5. Change it and activate Datasource
6. Right click over DS -> Create transformation between 0VENDOR and 0VENDOR_TEXT
7. Create DTP for that transformation.
8. Create infopackage for datasource
9. upload data and check if everything is correct.
Regards;
Ricardo

Infopackage-change from full load to delta

Hi all.
I am working on BW 3.5 and fairly new to BW.
I have an infopackage that is currently scheduled to run as a full load.
[ Infosource 0VENDOR - Datasource 0VENDOR_TEXT ] Is it possible to change to a delta upload.If so,please give me required steps to follow.
Thank you

Hello,
If we run to delta means INIT is mandatory.
Now you can INIT the data source without data transferbecause all the data is existed in OVendor.
select the delta Update In the Info package.
Regards,
venkata Sharma.

Open project cancelled or unable to load database...

I have been running version 9 sucessfully and moving projects around with no errors. Today, I cannot load any of my projects.
I have been through the threads and deleted the .cpj, moved the project to the root of my hard drive, etc.
Something else is going on.
I did see some information on files being blocked by the virus scanner. I'll pursue that with my help desk.
Any other ideas would be appreciated.
Thanks!

The only file that is MS Access based is the CPD file and it does not matter which version of Access you have on your machine, indeed you don't have to have Access installed.
If you have the same problems with the supplied sample projects, then maybe something has gone wrong with your installation of RoboHelp. Click Open on the RoboHelp Starter page and then click Samples in the ribbon on the left.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

OBIEE Pre-Builts Loading one year at a time

Hi,
We are in a situation where we need to load one year at a time into the BAW (warehouse). I have seen this done before where the initial load was a full load and only went forward one year. Each subsequent load was for a complete year until we were current. After that, it was simply incremental loads with the standard prune days of 30.
Does anyone have any detail as to how to do this?
Regards

Is the issue a performance issue (ETLs running for too long)? The problem is that if you do Year by year..and you want to do a "incremental" load for each year, that would be even more of a load..since you are not allowing for BULK load (where the tables get truncated). Either you can truncate and do BULK or incrmental..which may be an even heavier load. I think you are assuming that this approach will somehow help you from a hardware limitation standpoint..do you know for sure that it will?
If you really do want to do it, as I mentioned, you can edit the INITIAL and END parameters. It would help if you clarify the Hardware limitation...I think there are better ways to handle this than to do what you are doing.

Adobe cloud tries to load addon which I have deleted in Extension manager

when Adobe Cloud starts it tries to load an application (Edge FX lite) that I have deleted in Adobe Extension Manager cc. I get the error message ' unable to install the addon EdgeFX lite error 603. How do I stop this?
Also in Adobe Exchange in 'My Stuff' there are showing addons which I have removed in Adobe extension Manager cc which I would like to be removed from this listing as I will never use them, but if I right click to uninstall I fail to get rid of them.

Apologies, without making the assumption that you are signed in
1) Go to https://creative.adobe.com/addons/
2) In the top right hand corner select sign in and enter your Adobe ID and password
3) Once logged in, on the center of the screen at the left hand side, select the link 'All your purchases and shared items'
4) You will then be taken to a page that is the equivalent of your My Stuff panel.
5) You can then install individual add-ons/extensions.
Kind regards,
Lea

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Load Times

I am installing Adobe Creative Cloud enterprise in a virtual lab environment. This lab basically reverts back to a pre-defined state during reboot - all user profiles are deleted. When a user logs in and starts Photoshop for the first time, it takes up to 30 seconds to load. If the user opens photoshop again while still logged in, it opens in about 2 seconds. How can I speed photoshop up so it loads quickly the first time when a user launches it? Are there settings in the user profile that I can copy to other users? Is there something I can disable on the first load? etc. I tried copying some of the profile settings to the default profile, but that only reduces the launch time to about 10 seconds. InDesign is another example. Using Windows 7 x64, 8GB RAM machines. No other special software installed except office 2013. Thanks.

Probably nothing you can do. It's likely not PS itself, its the licensing stuff and the updaters, which naturally will have a hard time in a VM that prevents them from accessing certain things. Or in short: You are forcing them into quirks mode and it may take forever until they have established their port connections after a million failed attempts.
Mylenium

Loading error

Hi,
I'm trying to load data it is given an error,
WRT_8025 Error in BW Target. [Number of fields in Target do not Match
Repository fields = 15 BW fields = 18]
WRITER_1_*_1> Wed Oct 19 15:07:55 2007
WRITER_1_*_1> WRT_8025 Error in BW Target. [===> Compare Targets for InfoSource Failed.
SAP system exception raised.
key = RFC_ERROR_SYSTEM_FAILURE
message = See RFC trace file or SAP system log for more details
Please help me to find out the problem.
Thanks,

rob,
could you give the BW version also and what data you are trying to load and where ?
Ideally try replicating the datasource once again... and check your source system connection.
Arun

How do I use edge commons composition loader to load multiple compositions with a next and back button?

I am working on an interactive book and have set up each page as a separate composition in edge.
I am using the edge commons JS library to load multiple compositions into a main composition.
You can see how this works here: Edge Commons - Extension Library for Edge Animate and Edge Reflow | EdgeDocks.com
The way the edge commons tutorial is set up requires a button for each composition i want to load. I am interested in loading multiple compositions with a "next" and "back" button, and a "swipe left, "swipe right" gesture on the content symbol that each composition is loaded into. I also need the swipe features on the content symbol not to interfere with the interactive elements on the loaded composition.
Please suggest a solution that will work without adding additional scripts beyond edge commons and jquery.

Sort of. I'm using this code inside an action for a button symbol. But it doesn't work perfectly. Trying to debug it.
Let me know if you have any luck.
//Check to see if pageCounter already exists
if (typeof EC.pageCounter === 'undefined') {
// it doesn't exist so initialize it to first page
EC.pageCounter = 2;
//check if the page is only 1 digit -- patch for single digit
if (EC.pageCounter < 9) {
// it is, so we need to pad a 0 on the front.
EC.pageCounterString = "0" + EC.pageCounter;
//e.g. 01 ...09,11,12,13....115,222352,,....
else {
EC.pageCounterString = EC.pageCounter;
EC.loadComposition(EC.pageCounterString + "/publish/web/" + EC.pageCounterString + ".html", sym.$("container"));
EC.pageCounter = EC.pageCounter + 1;
//TODO for back -1

Data loading

Requirement is that enhanced the extractor by adding fields mapped the fields in bw in DSO,added in dimension in cube and also mapped in multiprovider ,on multiprovider report is build.
Now for testing need to reflect the data in report.
How can it achieve ,need to load the data from infoobjects DSO to cube is it the right approach.
Please suggest how to achieve it starting from loading infoobject then to DSO and then to cube and finally to reflect the data in report.

Hi there,
I guess you've said it all.
You enhance a datasource with new fields, and you've also added those new fields in the DSO and also mapped from the datasource to the DSO these new fields. You've also add the fields in the cube and mapp the fields from the DSO to the cube. You've also add the fileds in the MultiProvider and have identified the fields there. You've also changed the query with the new fields
So for loading the data, you should load the attributes and/or texts for the new InfoObjects first.
After that activate the master data for those new fields.
After that load the data from the datasource to the DSO and activate the DSO
After that load the data from the DSO to the InfoCube and after that you can check the report with the contents of this new data (with the new fields).
Hope this helps,
Regards,
Diogo.

Loading

Hi ,
Need to load 2 newly added field in DSO and then in cube (fields where added in extractor),need to run just transactional load or need to load master data first

Hi
Have you also added those new fields to DSO and cubes??
if no please add them there and update respective transformations as well.
if yes its always good idea to load master data first and then transaction data.
specially before loading to cube or to DSO with SIds activated.
Hope this helps
Regards
Sudeep

How to add fields to already loaded cube or dso and how to fill records in

how to add fields to already loaded cube or dso and how to fill it.can any one tell me the critical issues in data loading process..?

This is sensitive task with regards to large volumes of data in infoproviders.
The issue is to reload of data in case of adjusted structures of infoproviders.
Indeed there are some tricks. See following:
http://weblogs.sdn.sap.com/cs/blank/view/wlg/19300
https://service.sap.com/sap/support/notes/1287382

When i login to a website, it loads then gives me a blank page ?

I can view a page regularly, like everything is normal until i go to log in. I get a blank page as soon as the page loads, and this happens to many websites. Ive tried searching in safemode, editing my firewall settings, removing cookies, disabling plug-ins, clearing history/cache, but i've had no luck so far. Anyone have any solutions ?
I notice that every page i load includes ".php" in the URL bar.
Thanks in advance

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Loading sound clips in my swing application

I have searched all the forums, din't find what i want.
I have many small sound files to be played in my application. Even on mouse Pressed, Drage etc etc....
Now I was looking for a better way of Loading the Sound files in memory as the application starts.....
If I use the Clip Interface of javax.sound and initilize them and open a stream, invoke the open() method, and store it in hashmap. So that when ever i need that file i will lookup for that clip and trigger the start() method which actually plays the sound. IS the approach the right approach, will not the Cip object keep the IO handle open, I have nearly 40 Clips to be loaded.
Can any one suggest me the better way of implementing this.
TIA
Zoha

As far as I know,there is no facility for detecting mouse scrolling wheel in JDK 1.3.
Check it in the later releases of JDK.

0VENDOR_TEXT - Loading

Similar Messages

Maybe you are looking for