1.4 and NT Server 4.0

I get a ddraw.dll initialization error running graphics programs on an NT 4.0 Server platform.
Is it a known bug or somthing depending from me?
thanks

We've been seeing this too but now can't make it happen again. I'd like a reproducible case so that we can figger out the underlying problem.
Elsewhere on these forums, someone else has reported the same bug, and pointed to a microsoft article that talks about old versions of ddraw that mmap some memory to the address 0x43000000 as a way of doing IPC.
Are you using NT 4 SP 5/6/6a? You can make this happen at will (with JDK 1.4) by doing java -Xmx1G <app> since this will reserve memory at the address 0x43000000 for the heap.
If you're not using a really big heap then could you tell me what you get when you do a 'tlist java'?

Similar Messages

Dunning report difference in dev,testing and prod server in sap

Hi all..
we are facing a problem while executing the tcode f150 in dev,tsting and production server.
while giving the same run on and identification,the different parameters are coming and the status is geting changed.
in ker,the process is getting compelted,in testing the process is getting sceduled,complete but getting the status as"process completed but job deleted".
and in production,the status like testing server is coming but some tabs(from the too bar where delete,etc lies)are not getting to see,its not showing up.
please tell me if we can check it through some tcodes,or eliminate the eorr.
we are not able to locate the cause behind.thanks in adv.

Hi chandu,
In my previous Organisation we got exactly the same landscape for BW as you described.BCS(BAYER COPSCIENCE LTD) operates a BW System Landscape with one centralized Global Development System and three regional Quality Assurance and Production Systems located in Europe, Asia Pacific and Americas. This Landscape is to ensure consistent data models to be available in all regional systems as well as to minimize development efforts and make use of respective synergies.
This is perfectly working for BCS ,and I think, this is the most approriate way of handling of resources.
Regards
CSM Reddy

Error Message when installing Companion CD for HTMLDB 1.6 and HTTP Server

Hi. First time forum user so bear with me.
I'm not sure if this is the correct forum for this but the assistance of anyone who may be able to shed some light on the problem whould be greatly appreciated. I am having a problem when attempting to install the Companion CD for HTMLDB 1.6 and HTTP Server, details given below:
The following Oracle components have been successfully installed
     Oracle 10gR2 Database.
     Oracle 10gR2 Database patch 10.2.03.
     Critical patch up date (security).
The following Oracle component failed to install.
     Companion CD for HTMLDB 1.6 and HTTP server
Scenario leading up to failure
     Extracted companion CD installation files to D:\oracle\utilities\Oracle_10_2_0_Companion
     Executed D:\oracle\utilities\Oracle_10_2_0_Companion\companion\setup.exe.
The following error message is displayed in a "JAVA VIRTUAL MACHINE LAUNCHER" dialog box
     "Could not find the main event class. Program will exit."
I have been attmepting to resolve this problem for over a week and have already checked the following with no resolution to the problem:
Cause. This issue may have to do with two issues (and may occur more on Windows):-
1. Within the ORACLE_HOME directory full pathname there is a space.
2. The directory from where the software / patch is being installed has a space within the directory full
pathname (where the file for the installation by default is named products.jar or products.xml).
Solution. To implement the solution, please execute the following steps:-
1. Rename the full pathname directory NOT to contain a space.
2. Launch again the OUI... and verify if the problem occurs.
Any further guidance would be greatly appreciated.
Edited by: user10386555 on 03-Oct-2008 02:51

Can you install using OUI from the RDBMS installation? IIRC, there is a problem using OUI on companion to install companion items.

Reference to database and/or server name in '' is not supported in this version of SQL Server

Hello all
I am using C# and ADO.NET (native) - Visual Studio 2013.
I am always using full qualified queries like "SELECT * FROM [database].[schema].[table]"
Obviously there is a problem when doing this against SQL Azure,
I get the following error: "Reference to database and/or server name in '' is not supported in this version of SQL Server"
Interesting fact: With SQL Management Studio, the same query works.
I need to know if this error is really a true one or not.
If yes, I can quit using SQL Azure. I would need a SQL Server and not a partial SQL Server :-)
Thanks and best regards
Frank

Hi,
Here are my suggestions:
1. Use partially qualified queries, because:
a. from a security standpoint, you'd want to limit your login's access across the server instance
b. in order to achieve a even better, you should specify your database as the Initial Catalog directly in the SQL Connection.
If you take into account these practices, SQL Database doesn't come with any limitation from that point of view.
However, in regard to 'With SQL Management Studio, the same query works', this is actually only partially true because if you run that query agains ADO.NET, you'll actually end up in switching databases along the query which is obviously not permitted in
SQL Database since you're running in a hosted black-box version of SQL you're not managing. It's just like running the USE <dbname> command which obviously doesn't work.
Alex

How to have one centeral management console for DB and Application server?

Hi
Thank you for reading my post
I read in several places that ORACLE provide facilitis that help developers to have one centeral console to manage Application server / Database and what ever oracle products.
I want to know that, when i have Oracle 10g r2 and Application server 10.1.3.1 installed, how i can use that centeral management console?
is it some other application that i should install ?
or it is just some more configuration?
thanks

What you are looking for is called Grid Control.
You will need the Grid Control Agent installed on each server that has products from Oracle's technology stack installed (database, web server, app server, etc). You will also need install the Grid Control software and repository.
You can download Grid Control from the following link:
http://www.oracle.com/technology/software/products/oem/index.html

Understanding Application and Web Server Integration

Folks,
I am relatively new to web development and have some fundamental questions. I have read various articles and posts on these forums that describe the difference between an Application server and web server but haven't seen any on the integration of the two.
I have recently downloaded the Sun Java System Application Server, built a simple application with a couple of JSPs, servlets and static html pages and deployed it through a deployment tool that came with the application server.
Now, the application is accessible through my browser, so It seems the application server does everything I need, even for serving static pages. Do i need a web server? If so, would I implement a web server for design reasons and host static pages on that? Any hints on how to do this?
Your help is appreciated.
-joe

No you don not. However, if you had a large site, which experienced thousands of hits a minute, you wouldn't want to burden your application server with the overhead of serving static content. Otherwise, go for it.
As far as integrating an application server with a web server, I only have access integrating Tomcat with various web servers and it's not difficult at all. There's another post here (today as a matter of fact) where I give details for Tomcat and IIS.

I want to remove the COnlineBank, OnlineBank and csample applications from my application and web server.

How can I safely do this on Solaris? I've tried "iasdeploy removeapp" and "iasdeploy removemodule" with no luck. I want to clear all of this demo stuff out to make both the web and app server look more production like.
Thanks
Eric

Eric,
these applications are applogics which are not controlled by the
iasdeploy tool. Unfortunately, there is no tool available to remove
these applications for you. What you can do is to manually remove all
their entries, but be careful if you do that. If you remove the wrong
keys you might break your ias installation, so be warned and make sure
you backup the whole ias registry before attempting to remove anything.
Eric Coleman wrote:
>
I want to remove the COnlineBank, OnlineBank and csample applications
from my application and web server.
How can I safely do this on Solaris? I've tried "iasdeploy removeapp"
and "iasdeploy removemodule" with no luck. I want to clear all of
this demo stuff out to make both the web and app server look more
production like.
Thanks
Eric
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!--
Han-Dat Luc ([email protected])
Senior Consultant
SUN Professional Services (iPlanet)
o .
o .
O _ ____ _ _
(_) _ \| | __ _ _ __ ___| |_ TM
| | |_) | |/ _` | '_ \ / _ \ __|
| | __/| | (_| | | | | __/ |_
|_|_| |_|\__,_|_| |_|\___|\__|
e-commerce solutions
Sun Microsystems Australia Pty Ltd

Remote and Testing Server Site Definitions

I am confused about what information I should put in my
remote site definition info and testing server FTC Host directory
text boxes. My host placed 3 directories: database, log, and www on
my server and Dreamweaver placed two directories, Connections and
_mmServerScripts in the same directory as the above 3. I have
placed all of my site files, including my home page and folders in
the www directory and my Access database in the database directory.
Dreamweaver placed the connection info in the Connections folder an
d _mmServerScripts in the same directory.
In order to construct my local site to match the remote site,
I created a www folder on my local site and placed all of my HTML
files and supporting folders in it.
From various Adobe Tech Notes I have read, I was led to
believe my FTP host directory
Should be www/. However, when I do this and create a new web
page on my local site and upload it to my remote site, Dreamweaver
creates a new www directory inside of the one my host created on
the remote site and uploads the file to it instead of placing it in
the www directory my host created. Also, when I use F12 to test my
page in my browser I get a 404 page not found because Dreamweaver
placed a www in the page URL that shouldn’t be there and
after I remove it I’m able to see my page in my browser. My
URL prefix on my testing server site definition is:
http://I.P.number.html.
What am I not doing right?
Should I use www/ as my FTP host directory or leave it blank?
Also, what should my URL prefix be?
Thanks for your help.

What you need to do is set up so that in the remote server
you point to the
www level on the server, and don't replicate this locally.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"Jim_Moore" <[email protected]> wrote in
message
news:[email protected]...
>I am confused about what information I should put in my
remote site
>definition
> info and testing server FTC Host directory text boxes.
My host placed 3
> directories: database, log, and www on my server and
Dreamweaver placed
> two
> directories, Connections and _mmServerScripts in the
same directory as the
> above 3. I have placed all of my site files, including
my home page and
> folders
> in the www directory and my Access database in the
database directory.
> Dreamweaver placed the connection info in the
Connections folder an d
> _mmServerScripts in the same directory.
>
> In order to construct my local site to match the remote
site, I created a
> www
> folder on my local site and placed all of my HTML files
and supporting
> folders
> in it.
>
> From various Adobe Tech Notes I have read, I was led to
believe my FTP
> host
> directory
> Should be www/. However, when I do this and create a new
web page on my
> local
> site and upload it to my remote site, Dreamweaver
creates a new www
> directory
> inside of the one my host created on the remote site and
uploads the file
> to it
> instead of placing it in the www directory my host
created. Also, when I
> use
> F12 to test my page in my browser I get a 404 page not
found because
> Dreamweaver placed a www in the page URL that shouldn?t
be there and after
> I
> remove it I?m able to see my page in my browser. My URL
prefix on my
> testing
> server site definition is:
http://I.P.number.html.
>
> What am I not doing right?
> Should I use www/ as my FTP host directory or leave it
blank?
> Also, what should my URL prefix be?
>
> Thanks for your help.
>
>

TFS and Build Server 2013 with CNAME

Hello Team
As we have TFS 2013 with Update 3 on windows server 2012 and another windows server 2012 machine have build server installed. It is working well with machine name and build is running properly.
Once i tried to change the machine with CNAME its not started and throwing error like below:
Team Foundation Build Configuration
Build Service endpoint cannot be configured with a host machine other than
MACHINENAME.
OK
I tried to disable loop-back, firewall rule already applied, DNS pointed to correct IP address, DNS Flush already done and also i tried to un-register and register to new one but getting same error. Unable to register with CNAME ?
BotheTFS 2013 and Build Server have version
TFS Build- 12.0.30723.0 (Tfs2013.Update3)
TFS Server- 12.0.30723.0 (Tfs2013.Update3)
Any help ... thanks in advance!!!
Thanks Ranveer Katiyar

Can someone assist me on this ? I am stuck and unable to configure CNAME to Build Server and getting error
Team Foundation Build Configuration
Build Service endpoint cannot be configured with a host machine other than MACHINENAME.
OK
Thanks Ranveer Katiyar

What is the different between Sharepoint fast search service and Sql server fulltext search?

HI ,
I want to kow what is the different between Sharepoint fast search service and Sql server fulltext search?
Or Can I abstract the Sharepoint fast search from the Sharepoint platform as a isolate component?
Thank you.
James

They are very, very different beasts.
Firstly FAST Search for SharePoint is the old name for the product and is only relevant for SharePoint 2010 not 2013. It got merged into the standard SharePoint search for the 2013 release.
SharePoint search is aimed at providing a Bing or Google like experience for your intranet content, as well as providing some nifty features that are purely SharePoint releated along the way. That means it can crawl SharePoint content, file shares,
outlook mailboxes, internal and external websites and probably fifty other different things if you really tried. Whilst i'm not an expert on SQL full text search I believe it's intended to provide a search feature for content held within SQL databases
and tables.
Can you run SharePoint purely for Search? Yes, definitely.

HT1277 can I delete emails from my IPhone and the server as well?

Can I delete emails from both my IPhone 5 and the server as well?

It's very easy to do - open up the music app, find the song/artist/album you want to delete and then swipe on it right to left and press 'delete'. Once you have done this it will take up no more space on your device whether it's in the cloud or not.
If the song is still appearing in the music app with a little cloud next to it then you can stop it from showing by going into settings, music, and turning off 'show all music'. Note that this will remove ALL songs from the music app that have the cloud next to it (the cloud means they are in the cloud, online, but not stored on the device) and if you want to play them you will have to open itunes and redownload it, or change this setting back to on.
Let me know if you need any more help!

Development and Quality server using different screen color setting

Hi,
I want to differentiate the Development and Quality server using different screen colors,
How can I set different color logon screen for the different kinds of servers.
Thank You.
Best Regards,
M.Thirumoorthi
[email protected]

Hi Thiru moothi,
Please check these links :
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/modifyingtheLogon+Page&
Custom Password Change Page
Custom Portal Logon Page
Reward points if handy!
Cheers,
Sandeep
Edited by: Sandeep Tudumu on Mar 26, 2008 7:41 PM

Best Practises for File Sharing and Print Server on Windows Server 2012

Is it better to have File Sharing and Print Server installed on the same Windows 2012 Server ?
Or, they should be installed on 2 different Windows Servers ?
Hussien Sherief

It will work just fine to combine them.
But most people would recommend keeping functionality separate... if the budget allows. That whole "single point of failure" concept. If that server dies, you've lost both of those functions.

I am upgrading to Calendar Server 4.0 on NT with more than 9 nodes (or I already have) and my server won't start

I am upgrading to Calendar Server 4.0 on NT with more than 9 nodes
(or I already have) and my server won't start.
<P>
The steps are the same whether you have already upgraded or are about to.
<P>
Calendar Server 4.0 on the Windows NT platform can only support up to nine
nodes on one server, while 3.51 supported up to 14. If you have a Calendar
Server 3.51 with more than 9 nodes that you want to upgrade to Calendar Server
4.0, Netscape recommends that you migrate the extra nodes to another Calendar
Server 3.51 on another Windows NT system. To accomplish this:
<OL>
<LI>Install Calendar Server on another Windows NT machine and configure it to
use the same directory server as your current Calendar Server.
<LI>Stop and backup your current Calendar Server.
<LI>Individually zip up the node directories you want to move to the new
server. (drive:\unsers\unison\db\Nx
where "x" is the number of the node you want to use.)
<LI>Stop the new Calendar Server.
<LI>Unzip the files into the new Calendar Server in the same place as they
were on the old server.
<LI>Edit the unison.ini
file on the new server to add the nodes you have just migrated.
<LI>Edit the unison.ini
file on the old server to remove the nodes you have moved to the new server.
<LI>Edit the nodes.ini
file on the old server to remove the nodes you just moved and then add them
with the new hostname. Keep in mind that you will only be able to modify the
node network from the old host.
<LI>Run unidbfix -export
on both servers for all nodes.
<LI>Edit the remotenodes.ini
file on both servers to reflect your node topology.
<LI>Run unidbfix -import
to import the changes into the node databases.
<LI>Run unidbfix -c,
then -f,
then -c
again on both servers for all the nodes.
<LI>If you don't get any errors, run uninode -test all
to test if your nodes connections are set properly. If they are not, <B>do not</B>
start either of the servers; instead, fix the errors and try again.
<LI>Start both servers.
<LI>Log in and check to see if you can see people on remote nodes.
<LI>Notify the users on the moved nodes of their new calendar host.
<LI>If you did this in preparation of an upgrade, you can now run the upgrade to
4.0 since both servers contain fewer than 9 nodes.
</OL>

Use Disk Utility whihc is in the Utilities Folder.
Select your Boot Disk on the left.
Select Verify Permissions
If any errors the do Reapir permissions.
You might have to repeat the process.
see this:
Steve

Matching data types b/w oracle and sql server

anyone here knows if there is a list of data types supported by both oracle and sql server (regardless of releases & versions?
an immediate response would be highly appreciated.
thanks.

Hi,
The following post might be of assistance to you:
http://msdn.microsoft.com/en-us/library/ms151817.aspx
If this is what you're looking for, then mark the question as answered and closed.
Regards,
Naveed.

Lost connection between ovm-manager and ovm-server (ovm 3.1)

Hi,
I have a manager as a VM on my laptop and a physical server as an ovm-server. Everything is fine when i boot the server but after some time, the manager stop to show the information from the server. in the ovs-agent log file the following messages are repeated regulary
[2013-08-29 13:06:19 6160] DEBUG (notification:289) Trying to connect to manager.
[2013-08-29 13:06:20 6160] DEBUG (notification:291) Connected to manager.
[2013-08-29 13:06:20 6160] ERROR (notification:316) No manager Core API server object for 10:60:4b:88:bc:24:10:60:4b:88:bc:25:fe:ff:ff:ff.
[2013-08-29 13:06:34 6171] ERROR (notification:64) Unable to send notification: (111, 'Connection refused')
I did not reboot neither the server nor the manager. No IP change. Rebooting the manager has no effect.
The only way to restore communication is to restart the ovs-agent on the server, but this restart disable the network card. I must be physical on the server to restart the network.
any help will be very helpful
best regards
Jean-Marc

Hi,
The are many steps to verify:
Verify with your firewall on the Oracle VM Manager system (service iptables stop).
Verify with a ping between OVM Manager and OVM Server using the IP Address and using the hostname for each one (from OVM Manager : ping ovm-server ; and from OVM Server: ping ovm-manager).
I hope this can help you
Best Regards

1.4 and NT Server 4.0

Similar Messages

Maybe you are looking for