#1 is added automatically to the physical table at the end

Whenever I check out the rpd(from MUD server), some of the tables contain #1 at the end of the table name. I dont understand why is it adding automatically and because of this I am not able to get the reports working correctly.
Gurus, can you suggest me how to avoid that?

This occurs frequently when you tried to re-name (alias is there) table or import table again by the other users.
Please open in online -> remove all #1 -> move it MUDE environment
or
Please check out as -> delete all correspoding #1 - > Check in and again check out ->create again.
This could be also because of the decision analysis which you have choosen and the other person bleong to the same project modified the same object.

Similar Messages

Logical table with data restrictions from the physical table

Hello, I have a question about the relationships between the Logical Tables in Business Model and Mapping and The Physical table in the physical layer. The problem is the next one:
I have a Physical Table named T1 that contains the attributes: Id, DateChangeState, State,…
T1
DateChangeState| ID |State     | Other columns….
01/01/2011 | 1 | 03 |     …
02/01/2011 | 1 |     11 |     …
03/01/2011 | 1 |     02 |     …
02/02/2011 | 2 |     01 |     …
03/02/2011 | 2 |     02 |     …
I need filter this table and extract only one row per ID. The row that I need is the row who contains the Max(DateChangeState) per ID. I don’t know how extract only the rows selected from the physical table to the Logical Table.
I need that the logical table contains the next rows:
T1_Logical
DateChangeState |ID |     State     Other columns….
03/01/2011 | 1 | 02 |     …
03/02/2011 | 2 | 02 |     …
How can I extract only the rows with the Max(DateChangeState) grouped by ID in the BMM?
I thought put this condition in the column mapping (CASE WHEN DateChangeState=Max(DateChangeState)) but the Max(DateChangeState) was not grouped by ID.
Any idea about how solve this problem?
I can not use the group by in the answer and I can not change the physical layer.
Thank you,
Best Regards.

Hi Rajeevagrl your solution is very good but I dont´t know why obiee is applying twice the max condition, The select is the next one:
select distinct D1.c1 as c1,
D1.c2 as c2,
D1.c1 as c3
from
(select D1.c1 as c1,
D1.c2 as c2
from
(select D1.c1 as c1,
D1.c2 as c2,
max(D1.c3) over () as c3
from
(select T379.ID as c1,
T379.DATE as c2,
max(T379.DATE) as c3
from
T1 T379
group by T379.ID, T379.DATE
) D1
) D1
where ( D1.c2 = D1.c3 )
) D1
order by c2
Edited by: 848497 on 14-abr-2011 3:58

Dynamic name for the physical table

Hi Guys,
How to setup dynamic names for the physical table? Where it is useful?*
Pls help me out on this.
thanks

Check this similar post which might be of help dynamic physical table source schema
Cheers,
KK

How to mark the physical tables as cacheable

Hi All,
Can someone please tell me how to mark the physical tables as cacheable.
Thnaks a lot

Hi,
by default they are cacheable...
You can see it on repository, physical layer, right clik on table, properties, on general tab, check cacheable...
You can specify peristence time...
See this article, you will find an image with table properties:
http://obieeblog.wordpress.com/2009/01/19/obiee-cache-is-enabled-but-why-is-the-query-not-cached/
Regards
Nicoale
Edited by: Nicolae Ancuta on 26.05.2010 09:15

How to import tables to the physical layer of the Administration Tool.

Friends could help me with this issue. I'm just starting in OBIEE
How to connect a ORACLE database 11g R2 installed on Linux with OBIEE administration tool that I have installed Windows Server 2003 to create a subject area.
Basically I want to import the tables from the database on Linux to the physical layer of the administration tool that is installed on Windows Server 2003.
I can tell how to make this connection step by step.
Beforehand thanks for the support.

hi,
How to connect a ORACLE database 11g R2 installed on Linux with OBIEE administration tool that I have installed Windows Server 2003 to create a subject area.create DSN by taking correct ODBC driver for 11g R2 in windows 2003 with linux DB credentials
thanks,
Saichand.V

Ho do I change the physical order of the columns in a table

I want to change the physical order of the columns in a table, so that I get the expected order when I query like :
select * from <tablename>

Hi!
There are different methods of doing that, you can either create a view on that table which will retrieve the columns in the correct order, or you can copy and rename the table using CREATE TABLE AS SELECT ..., or you can use the online table redefinition functionality if your using 10g.
Regards,
Petra

Not able to see data in the qualifier table of the main tbl , Data Manager

Hi,
I have an issue of not able to see the data of two qualified table after populating them.
It is in mdm-5.5 ps4.
When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
However unlike other qualified tables the data does not showup automatically for these two tables.
Appreciate any suggestion or feedback on this.
regards,
-reo

You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
You use the Filter Checkbox to limit the qualified table records by the current search selections.
Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
Message was edited by:
Adhappan Thiagarajan

No row count in the Physical layer of the Administration Tool

Hi,
While creating physical layer, I imported tables and set connection pool.
After this, to verify connectivity, clicked Tools > Update All Row Counts.
Now according to Oracle online guide,
"when update all row counts completes, verify that the row counts are displayed in the Physical layer of the Administration Tool"
I do not see the row counts in the Physical layer of the Administration Tool. No error message gets displayed either.
Am I doing something wrong?
I am new to OBIEE.
Thanks in Advance & Regards,
Deeba

Hi Hammett81 ,
I think, I have given configured connection pool correct. (following Oracle guidelines: 'In the Connection Pool dialog box, on the General tab, verify that the call interface is set to Default (OCI 10g) and change the data source name to the appropriate tnsnames.ora entry ( ORCL in this example). Please note that this is the TNS service name, not the ODBC DSN. ' )
I tried to give ODBC DSN (SH) as call interface, which resulted in an Error dialogue, implying, previous configuration was correct.
So, I reverted back.
Regards,
Deeba

How can I adjust the entire table in the middle of the file before printing?

I had a file and want to print it out.
But the margin seems a little bit strange, and I want to move the whole table into the very middle of the paper ready for printing (as A4 size).
Is there any one who knows how to deal with this issue?
Thanks.

Hi Yoonam,
Numbers 3.1
Try Alignment Guides and Rulers as suggested here:
Print View workarounds
To see the margins now that Numbers 3 has lost Print View, try this
Layout Guide for Numbers
Regards,
Ian.

Problem while filling the Setup Table for the DS 2LIS_02_SCL.

Hi All,
When I am trying to fill the Setup table for the DataSource 2LIS_02_SCL and only for one specific Purchase Order, it is showing me a message like
u201CDataSource 2LIS_02_ITM contains data still to be transferredu201D
I have deleted the Setup Table and I want to delete the entries from SM13, but I do not have Authorization.
Also, here I am trying to fill the Setup Table for 2LIS_02_SCL and not for 2LIS_02_ITM, but the message displayed above is showing as 2LIS_02_ITM DataSource. I think the Setup Table will be same for both the DataSources.
Waiting for your valuable inputs.
Thanks in Advance.

Hi,
When you want to fill the setup tables first you need to delete setup tables to avoid the duplicate entires in setup tables ( you can delete the setup tables by using t.code LBWG with application no is 02)
In your case, the data souce is 2LIS_02_SCL for purchasing.
when you want to delete the setup tables by using t.code LBWG with 02 application no it will delete all the purchasing related data from all the data sources like
2LIS_02_SCL
2LIS_02_ITM
Before the deletion of setup tables you need to clear the delta Queues and stop the V3 jobs, which loads the data to Delta Queues (RSA7) and Update tables(LBWQ).
you need to run the V3 jobs manually by using LBWE > Job control > and schedule the jobs until the delta queues will get 0 records. that means no data will be available in RSA7 and LBWQ
go to SM37 to see the jobs LIS-BW-VB_APPLICATION_02,
once the delta queues gets 0 records by running V3 Jobs manullay.
Then remove the released state jobs > remove from schedule means delete the jobs in LBWE > Go to job control > you can delete the released jobs.
Becuase No postings to be done in application tables, while running setuptable filling you should take some down time to fill the setup tables.( OLI*BW) *=Application number.
Once you clear the Queues and delete the v3 jobs, then you need to fill the setup tables after deletion of setup tables.
once you fill the setup tables , by running intialization to BW side the delta Queue is formed for the data source in R3 side
Now the postings can be done in R3 side, so you need schedule back the V3 jobs, which you already delted from LBWE to load the data from application tables to RSA7 or LBWQ.
I hope this may help yoou.
Regards.
Rambabu
Edited by: Rambabu velanati on Jun 9, 2010 4:41 PM
Edited by: Rambabu velanati on Jun 9, 2010 4:52 PM

I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

The largest capacity HDD that you can install is the HGST 1.5 TB HDD:
http://eshop.macsales.com/item/HGST/0J28001/
Any 2.5" 9.5mm thick SATA HDD will fit and operate in your MBP, regardless of capacity.
Ciao.
Message was edited by: OGELTHORPE

How to find the physical path of the ASM disks?

I am in a dilemma on how to find out the physical path of the ASM disks. I tried the following query, but as you can see it is not providing me the physical path of the LUN. This is a 2 node 10.2.0.4 RAC Cluster using asmlib package.
col name format a20
col path format a20
col label format a20
select name, path, label from v$asm_disk;
NAME PATH LABEL
ORCL:ASM103 ASM103
ORCL:ASM104 ASM104
ORCL:ASM117 ASM117
ASM101 ORCL:ASM101 ASM101
ASM102 ORCL:ASM102 ASM102
ASM105 ORCL:ASM105 ASM105
ASM106 ORCL:ASM106 ASM106
ASM107 ORCL:ASM107 ASM107
ASM108 ORCL:ASM108 ASM108
ASM109 ORCL:ASM109 ASM109
ASM110 ORCL:ASM110 ASM110
NAME PATH LABEL
ASM111 ORCL:ASM111 ASM111
ASM112 ORCL:ASM112 ASM112
ASM113 ORCL:ASM113 ASM113
ASM114 ORCL:ASM114 ASM114
ASM115 ORCL:ASM115 ASM115
ASM118 ORCL:ASM118 ASM118
ASM119 ORCL:ASM119 ASM119
ASM120 ORCL:ASM120 ASM120
ASM121 ORCL:ASM121 ASM121
ASM122 ORCL:ASM122 ASM122
ASM123 ORCL:ASM123 ASM123
NAME PATH LABEL
ASM124 ORCL:ASM124 ASM124
ASM125 ORCL:ASM125 ASM125
ASM126 ORCL:ASM126 ASM126
ASM127 ORCL:ASM127 ASM127
ASM302 ORCL:ASM302 ASM302
ASM303 ORCL:ASM303 ASM303
ASM304 ORCL:ASM304 ASM304
ASM305 ORCL:ASM305 ASM305
ASM306 ORCL:ASM306 ASM306
ASM307 ORCL:ASM307 ASM307
32 rows selected.
Any help will be appreciated.
--MM

hi
use the following linux command as root:
$oracleasm listdisks
hth

How to populate the main table and the lookup's at the same time

Hi ,
What I have with me is the XML files which contain the data from the material master and the excel sheet which talks about the mapping . it basically tells me which field of the main table maps to which field of which segment in the IDOC and also the name of the table and the field in the R3 system .
I wish to use this info to populate the data in the material repository .
- How can I populate the data in the lookup table at the same time when I am populating the main table ? I have only the XML's that correspond to the main table . I don't have seperate data for the lookup tables .
- Can I use the standard maps available for import in the business content of material repository in MDM ?
- If the answer to the second question is NO then I think i can create the maps and save them for future use .
Regards
Deepak Singh

Hi, Deepak
>>> - How can I populate the data in the lookup table at the same time when I am populating the main table ? I have only the XML's that correspond to the main table . I don't have seperate data for the lookup tables .
I don't think you can populate both main table and all fields of lookup tables at the same time, i.e. using same map. You can consider 2 options to upload all information you have:
1) If your XML file contains data you would like to upload to lookup tables, you can upload it to MDM lookup tables with several maps using same XML and choosing different sections of that XML corresponding to different MDM lookup tables.
2) Also you can upload main table simultaneously with lookup table entries (using same map), but in this case new lookup table entries will only contain display field values that you mapped. To do this you should use 'Add' value mapping functionality for fields that you mapped to lookup tables.
>>>- Can I use the standard maps available for import in the business content of material repository in MDM ?
1) In case you have material master repository delivered by SAP and you use XML files which structure corresponds to SAP predelivered XSD schemas then you can use these maps undoubtedly.
2) If your repository is based on SAP predelivered, but you changed it ,you should adjust these maps due to differences in repository structure and XML files structure.
3) If you created your repository from scratch you should consider option of making your own import maps.
Regards,
Vadim Kalabin

Hyperlink - The physical location in the page

When I export the A PDF file, how do I know the physical location of the hyperlink in the output page (coordinates)
I need to export from Indesign
- Hyperlink physical location (# page & XY coordinates)
TIA

I guess I'm misunderstanding the question, then.
I don't quite understand what you're trying to accomplish with this task. How does Excel factor into this? What value is it to have a report of x and y coordinates for an Acrobat page? This sounds like something you'd need for html coding, not a print document. If so, the pages should be exported as html pages, not Acrobat pdf files, from your original. I only ask because I have a feeling you might be creating way more work or expense for yourself than you need to be. The more information you can provide, the better advice you'll probably get.
If you need a report of x and y coordinates, I'm thinking Acrobat is the wrong application. It's not really a web design app. I don't have Dreamweaver here at my office, but I seem to remember that all that information is available if you open your pages in Dreamweaver, and there may be a way of extracting a report with just what you need. You might try asking your question on the Dreamweaver forum, if that's the route that makes more sense for what you're trying to do.

I canu00B4t see de PR in the EPRTRANS Table in the scenario Plan Driven Procur

Hi,
We want to transfer PR from R/3 to SRM. We have customize the Plan driven Procurement, but we can´t see them in the EPRTRANS table. The Release Strategy has been completed in the PR.
Releases:
R/3 6.0, SRM 5.5
Any help please?

Hi John,
The second option works in SRM.
Direct procurement in classic scenario works as if the system were extended classic. Thus your PO will be created in SRM and a copy of it will be replicated to ECC.
Regards,
Nikhil

#1 is added automatically to the physical table at the end

Similar Messages

Maybe you are looking for