1 listener 2 database on separate machine

Hi,
Can I actually separate the listener and the database instances on separate machines ?
Listener is at serverA
Database1 is at serverB
Database2 is at serverC

936079 wrote:
I am on 10g r2, can i use a standard listener to do the forwarding on serverA ?Why would you want to do that? If you want to increase the number of moving parts for a client to connect to the database, you need to justify that, right?
The database instances can be configured, via the +REMOTE_LISTENER+, to register the instance with the remote Listener.
This is often used in RAC (the SCAN Listener comes to mind). But doing this outside a RAC environment is unusual in my experience.

Similar Messages

  • Hyperion 11.1.1.3 and Oracle Database on separate machines, any experience?

    Hi,
    anybody has experience on installing Hyperion 11.1.1.3 (and paths) on Windows 2003 Server with Oracle Database 11g installed on separate machine?
    Is there any known issue?
    thanks a lot
    robo

    Hi,
    Many installs the Oracle database is situated on a separate server than the hyperion install, it is quite common.
    As long as there is a good link between the machines you should be fine.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How can I implement two TCP/IP servers (on two separate machines) and one TCP/IP client (on third machine)

    I have an application where I need to send data via TCP/IP from two separate machines to a third machine. The machines are on a local area network connected through a network switch. The data are generated independently through data acquisition by the two independent machines before are sent to the client on third machine. Each machine has one network card. Thanks.
    Solved!
    Go to Solution.

    If you have three separate machines, you don't need to use separate ports.  They will have three IP addresses.
    Remember this rule: TCP connections are EXACTLY like telephone connections.
    Have your client open two connections: same port on two different IP addresses.
    Each client listens for connections.
    After connections are established, you get to decide the protocol:  maybe the client should explicitly ask for data, maybe the servers just dump it without being asked. It's up to you.
    Read this:
    TCP tips and tricks
    Steve Bird
    Culverson Software - Elegant software that is a pleasure to use.
    Culverson.com
    Blog for (mostly LabVIEW) programmers: Tips And Tricks

  • Having trouble connecting SQL Developer to database on LINUX machine

    Having trouble connecting SQL Developer to database on LINUX machine
    Hello,
    I am trying to connect my windows 7 home premium machine to an oracle database 11g on a RedHat 5 machine using SQL Developer. i got this error message on SQL Developer
    Status : Failure - Test failed :The Network Adapter could not establish the connection
    on Linux
    LSNRCTL> status
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    Start Date                03-APR-2013 16:13:13
    Uptime                    7 days 22 hr. 16 min. 41 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
    Listener Log File         /u01/app/oracle/product/11.2.0/db_1/network/log/listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.X.X.X)(PORT=1521)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "orc11g" has 1 instance(s).
    Instance "orc11g", status READY, has 1 handler(s) for this service...
    Service "orc11gXDB" has 1 instance(s).
    Instance "orc11g", status READY, has 1 handler(s) for this service...
    Service "orc11g_XPT" has 1 instance(s).
    Instance "orc11g", status READY, has 1 handler(s) for this service...
    The command completed successfully
    LSNRCTL> and TNSPING
    tnsping 172.x.x.x
    TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 11-APR-2013 14:32:17
    Copyright (c) 1997, 2005, Oracle.  All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
    Used EZCONNECT adapter to resolve the alias
    Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=172.x.x.x))(ADDRESS=(PROTOCOL=TCP)(HOST=172.x.x.x)(PORT=1521)))
    OK (0 msec)
    [oracle@ltebilling ~]$Tnsnames.ora On Linux ,
    ORC11G =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = orc11g)
    )Listner on Linux ,
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
    )/ect/hosts Linux ,
    # Do not remove the following line, or various programs
    # that require network functionality will fail.
    127.0.0.1               localhost.localdomain localhost
    172.x.x.x             LTEBillingand there is no problem of ping linux from windows
    Edited by: user11309581 on Apr 11, 2013 3:16 PM

    yes really i'm already enaple the port 1521 and SELINUX=disabled
    [root@ltebilling ~]# /etc/init.d/iptables status
    Table: filter
    Chain INPUT (policy ACCEPT)
    num  target     prot opt source               destination
    1    RH-Firewall-1-INPUT  all  --  0.0.0.0/0            0.0.0.0/0
    Chain FORWARD (policy ACCEPT)
    num  target     prot opt source               destination
    1    RH-Firewall-1-INPUT  all  --  0.0.0.0/0            0.0.0.0/0
    Chain OUTPUT (policy ACCEPT)
    num  target     prot opt source               destination
    Chain RH-Firewall-1-INPUT (2 references)
    num  target     prot opt source               destination
    1    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
    2    ACCEPT     icmp --  0.0.0.0/0            0.0.0.0/0           icmp type 255
    3    ACCEPT     esp  --  0.0.0.0/0            0.0.0.0/0
    4    ACCEPT     ah   --  0.0.0.0/0            0.0.0.0/0
    5    ACCEPT     udp  --  0.0.0.0/0            224.0.0.251         udp dpt:5353
    6    ACCEPT     udp  --  0.0.0.0/0            0.0.0.0/0           udp dpt:631
    7    ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:631
    8    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED
    9    ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           state NEW tcp dpt:1521
    10   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           state NEW tcp dpt:22
    11   REJECT     all  --  0.0.0.0/0            0.0.0.0/0           reject-with icmp-host-prohibitedbut from windows system when i'm try tnsping i got this error
    C:\Windows\system32>tnsping orc11g
    TNS Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on 11-APR-2
    013 14:44:09
    Copyright (c) 1997, 2010, Oracle.  All rights reserved.
    Used parameter files:
    D:\app\ubai\product\11.2.0\dbhome_2\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x
    .x)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orc11g))
    TNS-12535: TNS:operation timed out
    C:\Windows\system32>

  • Connecting to a database on another machine, please help!!!!!!

    Hi there,
    I am new to oracle and at the minute I am using Oracle 9i. I have set up a database on one machine (PC2) and would like to create an odbc from another machine (PC1) to connect to this database. I have set up a listener for (PC1) the using oracle net manager on PC2. what I want to know is: is there anything else I need to do on the PC2 end???? Also, what needs to be done on the PC1 end??? please help!!!

    If everything is setup and working properly on the Server PC2, you can just test the ODBC from PC1 (assum you already have an Oracle ODBC drive).

  • 10XE and 9.2 database on 1 machine. help needed

    Is it possible to have both a 10XE database and a 9.2.0.5 database on 1 machine, running Windows 2000?
    I had a 9.2.0.5 database on my laptop, just for test purposes, and now I have installed a 10XE instance on it too. 10XE works fine, but the 9.2 listener service doesn't start anymore (not even when all the 10XE services are shut off). Of course I didn't install the 10XE in the same directory as the 9.2 database, so it didn't write over any of the settingsfiles.
    All the other services required for the 9.2 database start perfectly, except for the listener. That one fails and doesn't return an error.
    I guess some settings for the listener have been overwritten (perhaps in the registry?), but I don't know where. Does anybody have any ideas what needs to be changed?

    thanks.
    1. for the 3 entries that XE made by default, the status is Ready.
    But for the one that I've added to tnsnames for the 9-database, it returns the following:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = BEQ)
    (PROGRAM = oracle)(ARGV0 = oracleTWES) (ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(
    PROTOCOL=beq)))'))) (CONNECT_DATA = (SID = TWES)))
    TNS-12560: TNS:protocol adapter error
    which basically is the same error as I get when I connect with Toad or a similar program.
    2. the 9-listener isn't started, so that won't clash with the 10-listener on port 1521
    3. the status, as you can see, isn't Ready for a few:
    D:\oracle\ora10ex\app\oracle\product\10.2.0\server\BIN>lsnrctl status
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Beta on 09-DEC-2005 15:42:05
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Beta
    Start Date 09-DEC-2005 15:35:23
    Uptime 0 days 0 hr. 6 min. 42 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Default Service XE
    Listener Parameter File d:\oracle\ora10ex\app\oracle\product\10.2.0\server\network\admin\listener.ora
    Listener Log File d:\oracle\ora10ex\app\oracle\product\10.2.0\server\network\log\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NB72.athylon.be)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NB72.athylon.be)(PORT=8081))(Presentation=HTTP)(Session=RAW))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 3 handler(s) for this service...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "TWES" has 1 instance(s).
    Instance "TWES", status UNKNOWN, has 1 handler(s) for this service...
    Service "XEXDB" has 1 instance(s).
    Instance "xe", status READY, has 1 handler(s) for this service...
    Service "XE_XPT" has 1 instance(s).
    Instance "xe", status READY, has 1 handler(s) for this service...
    Service "xe" has 1 instance(s).
    Instance "xe", status READY, has 1 handler(s) for this service...
    The command completed successfully
    6. There's no default domain name for my 10XE sqlnet. In my 9, there was, but I didn't add that part to the name when I put the entry in the tnsnames.

  • How to install Runtime Platform for more than one database on one machine

    Hi,
    What the docs loosely call Runtime Platform Service is in my opinion a combination of
    A) a bunch of software (installed under an ORACLE_HOME)
    B) the actual service process
    My question: if I have more than one databases on one machine, each containing an OWB Runtime, am I correct in assuming that I have to install the Runtime Platform software only once, but there will be a separate service process running for each database, each adressing the same Runtime Platform software? So under ORACLE_HOME nothing is kept that refers to a particular database?
    Jaap.

    Yes, we use such a configuration on our site. We have one OWB ORACLE_HOME and uses up to 4 instances. Each instance has its own Runtime Service Process running.
    Regards, Silvio

  • One Database on the Machine

    Hi all,
    I have a database on one machine can i run two databases on the same machine.
    Thanx in Advance

    Why do you want to run two databases on one machine?
    There are good reasons to do so, e.g. maintaining separate environments for the same application (development, integration). There are also bad reasons for doing so, e.g. two different production applications. In most cases I think in the latter situation you are better off putting both apps in separate schemas in the one database.
    Cheers, APC

  • Is there a way to run Motion and Final Cut Pro on Separate Machines?

    Is there a way to run Motion and Final Cut Pro from the same Final Cut Studio license on separate machines? We hadn't realised when we bought Final Cut Studio that it wouldn't allow this. Our editor doesn't use motion, and while I mainly use After Effects on our motion graphics machine, I was wanting to try using motion for some particle effects. Unfortunately, it won't let me open it while Final Cut is running on our editor's machine. I can understand not letting two copies of same application run under the same serial number at the same time, but it would be nice to be able to use both programs that we own concurrently. At very least it would be good to warn you that this isn't possible in the product description, not in some fine print license agreement once you have already bought the software.
    -Matt

    I do not know of any software, in any platform that can operate from the same license over a network simultaneously.This is the exact reason for the existence of Volume Licensing. If for example a project ran in each one of the included applications from different sources that were not an active network, I doubt you would have a problem.Like, doing a project at work and geting the outcome with the Powerbook at home...Sorta!

  • How to copy/move Portal database from one machine to another?

    I am receiving a ORA-22973 error (size of object identifier exceeds maxmum size allowed) on the wwsec_enabler_config_info$ table when attempting to import my entire "portal30" schema from one database to another on different Windows NT Servers.
    Background: I had Portal 3.0.9.8 installed, configured, and running with the following setup:
    Machine 1: Windows NT 4.0 SP 6, Oracle 9iAS 1.0.2.2, Oracle Portal 3.0.9.8
    Machine 2: Windows NT 4.0 SP 6, Oracle 8i Database 8.1.7.0.0
    We no longer have use of Machine 2 and needed to move the database over to Machine 1.
    I performed the following steps:
    1. Installed Oracle 8i database 8.1.7.0.0 on Machine 1.
    2. Set up the tablespaces in the database on Machine 1 to match the same names and sizes of the tablespaces in the database on Machine 2.
    3. Used the Oracle "exp" command to export the entire database that resided on Machine 2.
    4. Copied the ".dmp" file to Machine 1.
    5. Used the Oracle "imp" command to import the entire database on Machine 1.
    6. The import completed successfully with warnings. But I had received the ORA-22973 error during the import process.
    7. After it completed I compared the list of tables and packages in the "portal30" schema between the two databases. The wwsec_enabler_config_info$ table is missing.
    8. I tried to export and import only the wwsec_enabler_config_info$ table between the two databases, but continue to receive the ORA-22973 error.
    Without the table being created, access to the portal cannot be achieved.
    Here are my questions:
    1. Is there anyway to create the wwsec_enabler_config_info$ table without receiving the noted error?
    2. Is there any other workable way to get the portal database from Machine 2 to Machine 1?
    I am aware of the portal import/export utilities but that would require me to run through the 2 hour install of Portal 3.0.9.8 on the database on Machine 1 and then individually export and import all the portal components (security, pages, applications, content library, etc). I merely wanted to transfer the entire database from one machine to another, so I felt the Oracle exp/imp utilities would be quicker and less work.

    Hi,
    I've been hitting problems with Portal 3.0.9.8.1 against 8.1.7.2.1 on NT - i.e., Intermedia not working at all, and have been advised by support to move back to 8.1.7.1.1.
    I don't want to lose any of my content in the Portal since the db upgrade and am wondering on what is the best way to do this.
    The version of the Portal will be the same so I am hoping I can just use the Portal export and import utilities, as afterall, it is just data and the schema structures are the same between db versions. I'm also hoping that the Portal export doesn't use the standard Oracle EXP tool as it doesn't work anymore on 8.1.7.2.1 on NT!!
    Regards,
    John

  • How to migrate data from oracle 9i database to new machine 11gr2 RAC ASM

    Hi Expert
    I need your expertise to advise me what is the best method to move data from oracle 9i database to new machine running oracle 11r2 RAC database with ASM.
    Currently my production server running on HPUX ORACLE 9I database with normal file system. My new server is running SUN SOLARIS SPACR 64 bit ORACLE 11gr2 RAC with ASM. What is best method to move data over so it will be consistent. Any guide can refer.
    Regard
    William

    Hi William,
    See the note in metalink Migration of Oracle Database Instances Across OS Platforms [ID 733205.1] to saw the Endian Format of your OS. If is the same you can use the RMAN to convert the database to another OS, if not the only option is using export/import (Transportable Tablespaces).
    To upgrade from 9i to 11g, see the note 837570.1 - Complete Checklist for Manual Upgrades to 11gR2.
    To migrate your FS to ASM the only way is using RMAN, so see the note - How to move a datafile from a file system to ASM [ID 390274.1].
    Hope this help you.
    Best Regards,
    Ruben Morais

  • How to start managed server from admin server both running on separate machines

              I have an admin server on one machine and created a managed server on different
              machine, I am not able to start managed server from either machine. When I used
              the admin server machine to start the managed server remotely I got this message
              Connecting to http://fkeita:7001...
              <Jul 17, 2002 11:11:06 AM EDT> <Notice> <Security> <090082> <Security initializi
              ng using realm myrealm.>
              <Jul 17, 2002 11:11:06 AM EDT> <Notice> <WebLogicServer> <000328> <Starting WebL
              ogic Managed Server "managedserver3" for domain "admindomain">
              <Jul 17, 2002 11:11:28 AM EDT> <Emergency> <WebLogicServer> <000350> <Unable to
              create a server socket on Channel Default for: BFINKELMAN/90.0.0.25, port: 8002.
              java.net.BindException: Cannot assign requested address: JVM_Bind Perhaps the
              a
              ddress BFINKELMAN/90.0.0.25 is incorrect or another process is using port 8002.>
              <Jul 17, 2002 11:11:29 AM EDT> <Emergency> <Security> <090085> <Server failed
              to
              bind to any port such that it is not reachable from the console.>
              <Jul 17, 2002 11:11:29 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
              initialize the server: Fatal initialization exception>
              When I tried to connect managed server from its machine to admin server (running
              on separate machine ) I got this error
              Starting WebLogic Server...
              Connecting to http://fkeita:7001...
              <Jul 17, 2002 11:15:18 AM EDT> <Notice> <Security> <090082> <Security initializi
              ng using realm myrealm.>
              <Jul 17, 2002 11:15:18 AM EDT> <Critical> <WebLogicServer> <000364> <Server fail
              ed during initialization. Exception:java.lang.SecurityException: Authentication
              for user system denied
              java.lang.SecurityException: Authentication for user system denied
              at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
              SecurityServiceManager.java:978)
              at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
              erviceManager.java:1116)
              at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
              at weblogic.Server.main(Server.java:31)
              >
              <Jul 17, 2002 11:15:18 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
              initialize the server: Fatal initialization exception
              Throwable: java.lang.SecurityException: Authentication for user system denied
              java.lang.SecurityException: Authentication for user system denied
              at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
              SecurityServiceManager.java:978)
              at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
              erviceManager.java:1116)
              at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
              at weblogic.Server.main(Server.java:31)
              >
              The WebLogic Server did not start up properly.
              Exception raised:
              java.lang.SecurityException: Authentication for user system denied
              at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
              SecurityServiceManager.java:978)
              at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
              erviceManager.java:1116)
              at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
              at weblogic.Server.main(Server.java:31)
              Reason: Fatal initialization exception
              Throwable: java.lang.SecurityException: Authentication for user system denied
              java.lang.SecurityException: Authentication for user system denied
              at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
              SecurityServiceManager.java:978)
              at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
              erviceManager.java:1116)
              at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
              at weblogic.Server.main(Server.java:31)
              Thanks.
              

              I used startmanagedweblogic managedserver1 http://fkeita:7001 to try to start managed
              server, but it did not work, and got error messages. Error messages are posted
              on my first posting.
              "pankaj" <[email protected]> wrote:
              >Use the startManagedWeblogic.cmd / .sh script to start your
              >Managed/Clustered servers
              >
              >
              >"fkeita" <[email protected]> wrote in message
              >news:[email protected]...
              >>
              >> I have an admin server on one machine and created a managed server
              >on
              >different
              >> machine, I am not able to start managed server from either machine.
              >When I
              >used
              >> the admin server machine to start the managed server remotely I got
              >this
              >message
              >>
              >> Connecting to http://fkeita:7001...
              >> <Jul 17, 2002 11:11:06 AM EDT> <Notice> <Security> <090082> <Security
              >initializi
              >> ng using realm myrealm.>
              >> <Jul 17, 2002 11:11:06 AM EDT> <Notice> <WebLogicServer> <000328>
              ><Starting WebL
              >> ogic Managed Server "managedserver3" for domain "admindomain">
              >> <Jul 17, 2002 11:11:28 AM EDT> <Emergency> <WebLogicServer> <000350>
              ><Unable to
              >> create a server socket on Channel Default for: BFINKELMAN/90.0.0.25,
              >port:
              >8002.
              >> java.net.BindException: Cannot assign requested address: JVM_Bind
              >Perhaps
              >the
              >> a
              >> ddress BFINKELMAN/90.0.0.25 is incorrect or another process is using
              >port
              >8002.>
              >>
              >> <Jul 17, 2002 11:11:29 AM EDT> <Emergency> <Security> <090085> <Server
              >failed
              >> to
              >> bind to any port such that it is not reachable from the console.>
              >> <Jul 17, 2002 11:11:29 AM EDT> <Emergency> <WebLogicServer> <000342>
              ><Unable to
              >> initialize the server: Fatal initialization exception>
              >>
              >> When I tried to connect managed server from its machine to admin server
              >(running
              >> on separate machine ) I got this error
              >>
              >> Starting WebLogic Server...
              >> Connecting to http://fkeita:7001...
              >> <Jul 17, 2002 11:15:18 AM EDT> <Notice> <Security> <090082> <Security
              >initializi
              >> ng using realm myrealm.>
              >> <Jul 17, 2002 11:15:18 AM EDT> <Critical> <WebLogicServer> <000364>
              ><Server fail
              >> ed during initialization. Exception:java.lang.SecurityException:
              >Authentication
              >> for user system denied
              >> java.lang.SecurityException: Authentication for user system denied
              >> at
              >weblogic.security.service.SecurityServiceManager.doBootAuthorization(
              >> SecurityServiceManager.java:978)
              >> at
              >weblogic.security.service.SecurityServiceManager.initialize(SecurityS
              >> erviceManager.java:1116)
              >> at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
              >> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
              >> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
              >> at weblogic.Server.main(Server.java:31)
              >> >
              >> <Jul 17, 2002 11:15:18 AM EDT> <Emergency> <WebLogicServer> <000342>
              ><Unable to
              >> initialize the server: Fatal initialization exception
              >> Throwable: java.lang.SecurityException: Authentication for user system
              >denied
              >> java.lang.SecurityException: Authentication for user system denied
              >> at
              >weblogic.security.service.SecurityServiceManager.doBootAuthorization(
              >> SecurityServiceManager.java:978)
              >> at
              >weblogic.security.service.SecurityServiceManager.initialize(SecurityS
              >> erviceManager.java:1116)
              >> at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
              >> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
              >> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
              >> at weblogic.Server.main(Server.java:31)
              >> >
              >>
              >***************************************************************************
              >> The WebLogic Server did not start up properly.
              >> Exception raised:
              >> java.lang.SecurityException: Authentication for user system denied
              >> at
              >weblogic.security.service.SecurityServiceManager.doBootAuthorization(
              >> SecurityServiceManager.java:978)
              >> at
              >weblogic.security.service.SecurityServiceManager.initialize(SecurityS
              >> erviceManager.java:1116)
              >> at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
              >> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
              >> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
              >> at weblogic.Server.main(Server.java:31)
              >> Reason: Fatal initialization exception
              >> Throwable: java.lang.SecurityException: Authentication for user system
              >denied
              >> java.lang.SecurityException: Authentication for user system denied
              >> at
              >weblogic.security.service.SecurityServiceManager.doBootAuthorization(
              >> SecurityServiceManager.java:978)
              >> at
              >weblogic.security.service.SecurityServiceManager.initialize(SecurityS
              >> erviceManager.java:1116)
              >> at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
              >> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
              >> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
              >> at weblogic.Server.main(Server.java:31)
              >>
              >> Thanks.
              >
              >
              

  • Problem in recovering a database on another machine

    Dear All,
    I need your help in restoring and recovering a database on another machine. I don't have access to old machine to get logfile or archivelogs. I have taken full backup using RMAN. I have restored the database using rman sucessfully and trying to recover the database. RMAN have't restored the logfile. Database version is 8.1.7.4, OS is Solaris 8. In recovery, its showing the problem in rbs file. I'm showing all command and error. Just give me any idea that how to recover it sucessfully.
    SVRMGRL>recover database using backup controlfile until cancel;
    ORA-0279: Change 1935345519 generated at 08/19/2005 16:45:50 needed for thread 1
    ORA-0289: suggestion: /u07/oraexp/PROD/arch/arch_1_29958.arc
    ORA-0280: Change 1935345519 for thread 1 is in sequence #29958
    specify log : {RET}...
    cancel
    ORA-01547: warning: Recover succeeded but open resetlogs would get error below
    ORA-01194: file 2 needs more recovery to be consistent
    ORA-01110: data file 2: '/u06/oracle/oradata/PROD/rbs01-PROD.dbf'
    This RBS file size is 7GB. Is it the reason of problem. Even I tried until time, but its also has same error.
    SVRMGRL>recover database using backup controlfile until time '2005-08-16:20:10:00';
    ORA-0279: Change 1935345519 generated at 08/19/2005 16:45:50 needed for thread 1
    ORA-0289: suggestion: /u07/oraexp/PROD/arch/arch_1_29958.arc
    ORA-0280: Change 1935345519 for thread 1 is in sequence #29958
    specify log : {RET}...
    cancel
    ORA-01547: warning: Recover succeeded but open resetlogs would get error below
    ORA-01194: file 2 needs more recovery to be consistent
    ORA-01110: data file 2: '/u06/oracle/oradata/PROD/rbs01-PROD.dbf'
    Why its asking for archive file which generated on 19th, when I'm trying to recover until 16th only.
    Regards
    Rakesh

    Hi.
    What is the size of the redo logs in the database. With a small amount of transactions, there might be redo in this particular archived file from two days back. The timestamp of the archivelogfiles does not indicate that all redo in the file is from this day. It might have changes several days back if no logswitch occured inbetween.
    So, if I were you, I would provide all archivelogs required to get the datafiles consistent.
    As a matter of fact, if archived redo is in the following folder :
    /u07/oraexp/PROD/arch/
    I would use recover database until time and press return for all archived logs svrmgrl comes up with.
    I assume that the database was closed normally prior to taking the offline backup.
    Good luck.
    Rgds
    Kjell Ove

  • Two database in same machine

    Hai
    I want to create two database in same machine. I searched in google but no use.
    Is it possible in oracle 9i r2?
    If so,Anybody please help on that.

    jey84 wrote:
    I want to create two database in same machine. You can have a 100 Oracle databases on the same machine. The issue though is why?
    Why do you want to duplicate database overheads? Why two sets of system and process monitoring processes? Log writers? Database writers? Etc.
    Why two SGAs? Why two system tablespaces? Two temp tablespaces, undo tablespaces? Two sets of redo logs? Etc.
    You now have two database footprints. Instead of a single large SGA with properly sized buffer cache, shared pool, large pool and so on - you know have two smaller SGAs and smaller caches and pools that are now less capable and less scalable.
    Why would you want to do this?
    There are no sound technical reasons for running multiple database instances on a server - unless it is something like a 32 CPU/multicore server with 256 GBs of memory. But then why not use this as a cloud-type server on which you can run multiple server VMs? One VM for each database, as that provides more flexibility than multiple databases on a single server(physical or VM)?
    In today's world of cluster and cloud computing, running 2 databases instances on the same server does not make much sense. And needs to be backed up by reason and logic that justify such an approach.

  • Problem: Socket connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time

    Problem: Socket
    connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time
    Environment: -
    OS:
    Windows XP SP2/7
    Code:
    VC 6.0
    Dll: MFC
    Problem Description: -
    We have written a utility program which create socket (Using windows standard method [MFC]), and then make connection with another service (List Display) running
    on port 3334 in different machine and retrieve the required list data. This program was working fine in almost all the machines.
    But, we have received a severe intermittent issue on two machines. Client is facing issue in displaying the list data from port 3334.
    Attempt: -
    First we tried to debug code, and we come to know that socket is not creating in utility program. So we tried to telnet on ListDisplay service port 3334 and we were surprised that we were able to telnet, then we opened some more
    telnet window on same port 3334 around (6 to 8) window, and each cmd connected properly. But we were not able to create socket from utility program.
    Problem is severe because issue is intermittent.
    We have tried all the way, but we are not able to figure it out, that what can be the exact problem and what are the conditions, when utility program will not
    connect with ListDisplay service on port 3334.
    Kindly assist to resolve this issue. For any help, we would be really thankful.

    Hi,
    According to your description, it seems that you have created an utility program which is making connection with another service port 3334, however, two clients are facing issue in display the data list from port 3334.
    Port: 3334/TCP
    3334/TCP - Known port assignments (1 record found)
    Service
    Details
    Source
    directv-web
    Direct TV Webcasting
    IANA
    Since the port 3334 is used by directv-web service, I'd like to suggest check this service it is working well on the problematic clients.
    1. The client can be resolved in DNS well? Please run "nslookup" in the prompt command.
    2. Is there any 3rd party application interrupting? Do test in clean boot.
    2. Strongly suggest you run process monitor tool to analysis it.
    I am looking forward to your reply if you have any updated on your side.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for