1 Sold To 5 Ship To Multiple Sales Groups

Hi all,
Currently some of our customers in SAP are  configured as such: 5 ship-to customers with 1 sold to customer and 1 sales group .
We would like to change the setting to: 5 ship-to customers with 5 sales groups
And we would like to make sure that past data is also adjusted according to the setting change.
How can I do this?
Cheers~

In t.code OVX4, maintain the new 5 sales group and in t.code OVXJ assign the sales groups to sales office. Then in the customer master (t.code XD02) ->sales area data ->sales tab, maintain the correct sales group for each ship-to numbers. If you have many customers to update then you can use t.code MASS (object KNA1) to update the field. If you want to update in the open sales order, then also you can use MASS (with object BUS2032).
Regards,

Similar Messages

  • Multiple sales groups in single salse office

    Hi ,
    Can we maintain multiple salses groups for single sales office in sap crm

    Hi
    No we can not maintain multiple sales groups for a single sales office in sap crm until and unless  we convert org model to represent multiple assignments in SAP ECC or R/3.
    Path for maintaining this setting is
    spro>crm>org management>data transfer> convert org model to represent multiple assignments of SAP ECc.
    or
    Transaction code- CRMSC_SWITCH_ORGMODEL
    Reward points if it helps
    Regards
    Nadh.

  • Multiple Sales group assigned with sales office to Sales area

    I need to know whether i could be able to assign different sales groups to Sales area in BP master.
    Eg  Sale grp 1 assigned with sales office 1 to Sale org 1, DC1,DIV1.  
          Sale grp 2 assigned with sales office 1 to Sale org 1, DC1,DIV1.
          Sale grp 3 assigned with sales office 1 to Sale org 1, DC1,DIV1.
    The standard system is not allowing to maintain more than one combination if the same Sales Area. In the practical scenario, there could be more than one sales group can look after the sales in Sales Area thats attached to one sales office. Is there otherway to check this requirement?
    Another requirement is i need to read the sales group value during processing the transaction ( Remember still i have not saved the transaction and i am processing it). I have found the some BADI which is not helped me lot. Eg i am processing the lead by entering existing BP/ prospect, i need to read the sales group assigned in the transaction.
    Any body can help me out.
    Thanks
    Edited by: K Srikrishna on Feb 20, 2009 12:17 PM

    Hello,
    As of release CRM 4.0, it is possible to use the "Enhanced Backend
    Integration Model", where you may assign a sales office to more
    than one sales org, and a sales group to more than one sales office
    However this assignments are shown in a different way as in the
    standard model: multiple assignment are not viewed in the tree
    structure but in tab "FUNCTION".
    This is the standard design of the system. You can find more
    information about this new model in symptom of the note 691015.
    Also Please go through the documentation under following path:
    Customer Relationship Management
    Master Data
    Organizational Management
    Data Transfer
    Convert Org. Model to Represent Multiple Assignments in SAP ECC
    ( Documentation).
    I hope this information helps you.
    Regards,
    Sri.

  • Sales group wise credit report

    Hello Experts
    Right now,we are using S_ALR_87012178 report for the report on customer open item due analysis.
    However there are a few limitations here.
    Firstly, we need Customer # (KUNNR) to be displayed along with the customer name (NAME1). Presently, only customer name is displayed.Assuming, this can be solved to a certain extent by modifying the coding with the help of an Abaper, there is another limitation.
    *We need 'Sales Group' wise split up. This 'Sales Group' NOT from CMR,but from SO. [Since, for a single customer there may be cases of multiple 'sales groups']*
    Any help/Suggestion, will surely be appreciated.
    Good day....
    Rgds
    Sumanth.Gururaj
    Consultant- SAP SD

    hi,
    exactly my mate is right in this.
    you are requested not to change the STD coding part of SAP.
    please go for new report instead of old one.
    regards,
    balajia

  • CRM-Organization Unit-Sales Group

    Hi All,
    I would like to assign the multile R/3-Sales groups to a CRM-Organization Unit.
    Existing CRM orgnization unit master data
    Tab Funtion:
    - Sales Organization: 0100
    - Sales Office: 0100
    - Sales Group: blank
    Tab attribute:
    - Distribution Channel: 10, 20, 30 40
    We would like to maintain multile R/3-Sales groups to a CRM-Organization Unit.
    Sales group: 10A, 10B, 10C, 10D
    Would someone know how this requirement can be fixed ?
    Thanks

    Hi Marisa,
    Multiple Sales Groups can be assigned to a single Sales Ofifice through "Enhanced Org Structure". Please run the report CRMC_ORGMAN_SWITCH_TO_ENH_MODEL to convert the standard org structure into an enhanced structure.
    Regards,
    Vikram

  • Delivery Split from multiple sales order with signle ship to party

    Dear All,
    I have multiple sales oreder with different Sold to party and single Ship to Party.
    I want to combine all sales order into a single delivery but here deliver split due to different sold to party which I have checked through report ZLE_ANALYZE_DELIVERY_SPLIT.
    Can any body suggest me, whether i can write any copy control routine so that it will stop in splitting delivery.
    Please suggest if any other way of possibility.
    Regards
    Prashant

    All partners which stand in the partner schema of the delivery and which are copied from the preceding document are part of split criteria. The only mandatory partner of the outbound delivery however is the ship-to party.
    You can delete the sold-to party from the partner schema for deliveries with order reference and it is then no included in splitting criteria.
    Furthermore you can control split criteria in copy control routines -> field ZUKRL is used for this purpose. You can check standard routine FV50C001 for that.
    Your Z* code means that you have applied custom logic to define split criteria. But most probably it is called by copy control routines and the mechanism should be the same.
    For more details you can also check OSS notes:
    SAP Note 546668 - FAQ: Delivery split when creating deliveries
    SAP Note 166397 - Delivery split according to customer field ZUKRL
    Regards,
    Dominik Modrzejewski

  • How to create ship to party and sold to party for DC10 during sales order ?

    Hello all:
    When creating sales order for a material in VA01 with sales Org 1000,
    distribution channel 10, division 00
    The system does not give me any Ship to Party and Sold to Party with the above combination
    How to create ship to party and sold to party with the above combination (Plant 1000,
    sales org 1000, distribution channel 10, during creation of a sales order
    Ironically, when creating material master for a material with a material type KMAT, plant 1000
    sales org 1000, the only distribution channel is populating in the input help (F4) is 10
    For which no ship to party neither sold to party is maintained in sales order creation
    Thanks in Advance!!

    Dear Eshwer
    It is bcoz, the said account groups (Sold To Party and Ship To Party) are not created in the sales area 1000 / 10 / 00.
    To create a customer master, you have to go to XD01, select the Account Group, Company Code and the respective Sales Area and execute.  In the Customer Master, you have three tabs, viz.General Data where you have give address details of the customer, then in Control Data, you have to assign the respective Recon Account and in Sales Area Data, you have to maintain the customer's sales related details.  Once you give all these datas and save the data, a customer code will be displayed at the bottom.
    Now go to VA01, input the sale order type and the sales area and execute.
    thanks
    G. Lakshmipathi

  • Multiple sales to party for a ship to party

    Hi experts,
    I have a scenario, for example. My company is a service provider to many mines..say..mine X,Y and Z. so in my SD sales order my sold to party is either X or Y or Z. Now the company wants to track the actual buyer of the material from these mines by way of capturing them as a Ship to party. So ship to parties say A, B & C . Now this A or B or C can purchase materials from any one of the above mines (because same materials are produced by mines). How do i capture his scenario at the time of creating sales order.
    Possible solution i feel
    1.define individual account group for sold to party and ship to party and enter their code separately in sales order.
    2.Can i define possible sold to parties for a ship to party in the partner function,so that i will enter only ship to party and all possible sold to paty will come as a pop up....(pls explain if this is possible to do and how to do)
    Regards,
    Aju

    Dear Aju,
    Yes you can do as you said, create two account groups 1 for sold to party another for ship to party.
    you can assign your sold to parties to your ship to parties or ship to parties to your sold to parties.
    As per standard we generally assign different ship to parties to single sold to party,while creating the sale order once you enter the sold to party system will display allowed ship to parties in pop up.
    EX: you have X,Y and Z sold to parties and A,B and C ship to parties
    you can do like this
    X sold to party , Y sold to party  and Z sold to party
           A ship to party    A ship to party          A ship to party
           B ship to party    B ship to party         B ship to party
           C ship to party   C ship to party.        C ship to party.
    Regards
    Ram

  • Copy Special Stock Partner Automatically from Ship-To in Sales Order

    Dear SD GUru,
    I have an issue here which needs help.
    In my partner determination, I have configured SB to be a copied Ship-To which is working now.
    So, each Ship-To has its own Special Stock Partner.
    In my consignment issue sales order, I do change the defaulted Ship-To to other Ship-To but the old "SB, Special Stock Partner" will still remain in the consignment issue order and will not change according to the new Ship-To automatically.
    Any way to make the system to refresh without manual intervention?
    Thanks,
    Soo

    Hi,
    If I am not wrong then below is the situation which you are facing:
    1. You have a sold-to-party which has multiple ship-to-parties, right or worng ?
    2. Every ship-to-party has it's own special stock partner , right or wrong ?
    Now, if first two points are right then, you might be getting a pop-up for selecting the special stock and ship-to-party partner function once you put the sold-to-party in your consignment-issue. Now, this is the point where you can select the ship-to-first and then system would automatically determine the special stock partner from the selected ship-to-party record.
    Let me know about this if my understanding and the solution is correct or not.
    Hrishi

  • Delivey for Multiple Sales orders

    Hi,
      I am new to SD and would like to know how do we create a single delivery corresponding to multiple sales orders.
    Can someone please advice me about the same?
    Thanks and Regards,
       Aditya

    You can group together entire orders, order items of different orders or partial deliveries of individual order items in one delivery but only if this has been agreed with the customer.
    Prerequisites
    Order combination can only be carried out if the orders concerned have the appropriate indicator in the order header.
    The orders or the order items and schedule lines must have identical shipping criteria. This includes the following data:
    Shipping point
    Ship-to party
    Incoterms
    Sales organization
    If you try to combine items that have different goods issue dates, you receive a warning message. You can ignore this warning message. The earliest goods issue date of all the items is selected automatically as goods issue date of the entire delivery.
    Entering the Indicator
    You can enter the indicator that makes order combination possible in two places:
    In the customer master record, you can give a customer general allowance for order combination. The indicator depends on the sales organization, the distribution channel and the division as it is entered for a particular sales area.
    You can specify that all orders for one particular customer can be combined by entering an X in the Order combination field on the Shipping screen of the customer master record. The indicator is copied from the customer master record into the order header.
    You can specify manually that individual orders can be combined and then revoke the combination allowance later, if necessary. You can specify that orders can be combined by entering an X in the Order combination field of the Shipping tab page on the Order Header screen. If you want to block order combination, deselect this indicator (the checkbox should appear blank).
    Process Flow
    During delivery creation, you must distinguish between the following two situations:
    Creating an individual delivery
    You can manually add additional orders or order items to this delivery if the customer allows combination and order items fulfill the criteria for order combination.
    Processing a delivery due list
    The system automatically combines the order items in one delivery if the customer allows this and if the order items fulfill the criteria for order combination.

  • How to create one delivery for multiple sales order

    Hi!! Friends,
    Can some one explain the steps to be followed in creating one delivery for multiple sales order in SAP SD.
    Regards
    AKASH
    Message was edited by:
            AKASH TAMBI

    Hi.,
                  You can combine different orders in to one delivery ,But for the customer Order combination should be checked in  the sales area data of the shipping tab,we can combine orders but the ship to party,Route,Inco terms,Shipping date,shipping point should be same,you can do in T.code VL04 & VL10
    REWARD if helpfull
    Thanks & Regards
    Narayana

  • Combine multiple sales order in a single delivery

    Hi Experts,
    As per standard SAP we have a facility to combine multiple sales order in one delivery  if orders have same shipping point,ship to party & delivery date.
    But we have a requirement that the orders should get combine in a delivery only when shippping point,ship to party,delivery date & pricing date are same for orders.
    Please let me know is there is any standard config available or do we need to write any exits & so...
    Please reply ASAP .

    Hi,
         I think this is not there in standard functionality.
          In this case you need to go for user exit for delivery routine 101, include program FV50B101
    Check delivery routine 101 in VOFM and with the help of your abap consultant this can be done.
    Thanks,
    Swamy H P

  • Sold to party, Ship to party in VA05 report

    Dear Experts,
    I have one requirement in which I am supposed to display Ship to party and Ship to address fields along with sold to party field in VA05.
    1. Document Date
    2.Delivery Date
    3.GI Date
    4.PO Number
    5.Name
    6.Sales Doc Type
    7.Sales Document
    8.Created By
    9.Sold-to-party
    10.Name 1
    11.City
    12.Region
    13.Material
    14.Description
    15.Sales Unit
    16.Order Qty
    17.Confirm Qty
    18.Shipping Point
    19.Status
    20.Net Value
    21 Ship-to-party
    22 Ship-to-address
    Now the problem is I am not able to find appropriate user exit for the above requirement since Ship to party and Ship to address fields are not available in VBAP or VBAK tables and the existing user exits are
      PERFORM move_userfields USING 'VBAP'.
      PERFORM move_userfields USING 'VBAK'.
    Thanks in advance!!!
    Vishal
    Vishal

    Hi,
    For the sold to party and ship to party, get the values from VBPA-ADRNR where VBPA-KUNNR = VBAK-KUNNR and VBPA-PARVW = SP (Sold to party)
    For ship to party get VBPA-ADRNR  where VBPA-VBELN = VBAK-VBELN, VBPA-PARVW = SH.
    Once VBPA-ADRNR is known for sold to and ship to , pass them in ADRC-ADDRNUMBER and then get ADRC-NAME1, ADRC-NAME2, ADRC-CITY, ADRC-REGIO etc for printing the address details.
    Hope this helps

  • Autoinvoice Group Rules - Grouping of multiple Sales Orders

    I have this requirement to group invoices by subinventory, ship-to address and PO number, all these coming from the Order Entry form. What it means is that multiple Sales Orders having the same subinventory, ship-to address and PO number and also with Receivable Interface, Interfaced, should be grouped into a single invoice. Could you please advise what are the steps needed to do this. From the list of values for the Optional Grouping Characteristics in the Autoinvoice Group Rules form, I do not see the values like subinventory, ship-to address or PO number. Do I have to associate them (subinventory, ship-to address and PO number) with some of those in the list of values (eg, Line Level Descriptive Attribute1, Line Level Global Attribute1 or Transaction Flexfield Attribute1). Is there any order or procedure to associate them and where and how do I associate them? Your detailed advice to this is much appreciated. Thank you very much. God bless you

    Bill
    Yes you do have to associate functional entities like suninventory with the appropriate columns in the interface table.
    For a comprehensive list of columns and the data they contain, refer the Open Interfaces manual for OE - you can find a section where it describes column by column what info gets transferred to AR. I am sorry I don't remember the exact section names..i don't have access to a manual right now..later maybe!!

  • Multiple sales order  with single invoice

    Hi !
    For the same dealer can we make single Invoice dispatching  with multiple sales order ???  and How ?
    Thanks.

    Hi Indrajit
    If you want to create a single sales order into Multiple delivery then make sure that the delivery split should take place
    The following are the parameters for the delivery split
    Ship to party ,  route , delivery date, Shipping point ,Confirmed quantity date  , Delivery priority
    Example :
    Say you have line item 1 & line item 2 , for line item 1 you have different ship to party and for line item 2 you have different ship to party then delivery split will take place for this two line items
    Regards
    Srinath

Maybe you are looking for