10.0.6 grays out the starting timecode setting in "edit compound clip settings"

in earlier versions you could reset the time code starting value under "edit compund clip settings" accessed through the gear box under info. The latest update 10.0.6 shows the time code start value but will not allow changing it.

It's yet another stupidity of Canon. Try it from a card reader or disk archive. The Picture Transfer Protocol is switched off in the camera. How stupid is that?
This is what you get when you select a camera backup
Message was edited by: Tom Wolsky

Similar Messages

How gray out the fields in selection screen with parameters

Hi,
Can any one help me how to gray out the selection screen fields
Start-of-selection----
Parameters : p_status TYPE edids-status MODIF ID xyz DEFAULT co_51.
End-of-selection----
i want to grayed out the field p_status.
except At selection-screeen output, can any one suggest the other method of gray out the above field.
Thank u
B Ravi Kumar

I recently tried to remove widows7 on my macbook air using bootcamp and halfway through it grayed out .The windows 7 is removed but i cant free up the 62gig partition the windows was occupying on my 121gig ssd harddrive please help

i recently tried to remove widows7 on my macbook air using bootcamp and halfway through it grayed out .The windows 7 is removed but i cant free up the 62gig partition the windows was occupying on my 121gig ssd harddrive please help

You may have to see about using the Recovery HD partition to attempt to erase and restore useful function of the capacity lost to the former Windows installation.
And you may have to backup your contents outside the computer to do it. Disk Utility on the Mac OS X historically has not been able to touch a BootCamp created partition; so if BootCamp cannot remove it, then you have to see how to do the equivalent of a reformat of the entire drive (less Recovery partition?) then reinstall your OS X. Maybe from internet recovery, then get your applications, etc from the Mac App store, etc.
A complete system clone of your OS X on an external HDD would be another method to restore after reformat, of the portion you want whole again, not necessarily the space where Recovery may live.
There may be (an)other way(s).
Perhaps someone with recent experience
in this matter can reply & discuss options.
With my antiques, they almost know what I want before I tell them.
Hopefully yours will after you talk to it awhile.
Good luck & happy computing!

In my template, the code is grayed out and I am unable to edit it. How do I unlock the code?

I have a website based on a template. (Dreamweaver CS6). Just recently, the "code view" in the template is grayed out, and I am unable to edit it. I can edit the template in design view. I would appreciate suggestions of how the code got grayed out- or locked up. Thanks in advance.

Thanks everybody- I found a thread on a forum which solved my problem. In Dreamweaver: Commands → Clean Up HTML → (make sure non-Dreamweaver Comments" is checked. This clean up made the template then editable.
Thanks everyone.

My typewriter toolbar is graying out the ability to change font size, type, and color.

My typewriter toolbar is graying out the ability to change font size, type, and color.

Here's what I have done in the past. Maybe not elegant, but
it works. (I
use PHP, but I'm sure you can modify for ASP.)
In the HEAD of each web page, include regular old embedded
STYLE tags,
but INCLUDE an external PHP file:
<head>
<style type="text/css">
<?php include('styles/testcss.php'); ?>
</style>
</head>
Now in that included PHP file, just have CSS code which pulls
in your
dynamic data. Here's an example snippet:
body {
color: #600;
background-color: <?php echo
$row_recordset['bgcolor'];?>
Of course, you'll need the code for the recordset somewhere
too.
Alec
Adobe Community Expert

Advanced edit hyperlink-properties grayed out the first time

advanced edit hyperlink-properties grayed out the first time
Sub Problem:
When using the advanced edit cursor, right click Is used to select a hyperlink-properties the first time the dialog box pops up it does not have “focus” (not sure that is the right term, but the box is grayed out and will not respond to the keyboard.). It must be mouse clicked to get focus. The second time a link is right clicked to properties the popup responds to the key board and will move to the action tab with ctrl-tab
It’s not clear to me where the acrobat program is at that point.
Is that a known action or problem with acrobat pro 9.4.4?
Is there a key or keys from the keyboard that can force focus to the box?
The problem is each file I open I have to manually find a link and right click it to get the box then click in the box to get “focus”. After the first one the box pops up with focus.
John
Main Problem:
I have been working on converting a set of pdf files with 1000’s of hyperlinks like www.site.com\folder1\file1.pdf#page=10
To jump to a local copy of the files with a relative type link
../folder1/file1.pdf and then go to the proper page.
I have found that it can be done manually by changing the hyperlink to a javascript
var otherDoc = app.openDoc('../folder1/file1.pdf', this);otherDoc.pageNum = 10 - 1;
and setting each destination file with a disclose()=true;
Based on the help so far that java script cannot access the hyperlink value in a link
See: http://forums.adobe.com/thread/1039908?tstart=60
I have resorted to the following plan using acrobat javascript, an external keyboard macro recorder and excel in combination to get around the problem
Four folder level acrobat javascripts with “buttons”
One to get all the link quads in an array, in the pdf and report the total number
The second creates a form field in the far corner of the first page and moves there.
The third jumps to each link found by creating a form field just to the left of the link and zooms in so it can be selected by a “mouse click” from the keyboard macro recorder
The forth deletes the form field
The keyboard macro recorder runs javascript 2 and then 3 then clicks on the link just to the right of the middle of the screen and uses keys to get to the advanced editing to get to edit the hyperlink .
The hyperlink is then copied to excel where it is converted using string functions to the needed javascript text to be copied back.
To the acrobat file into a java script (after deleting the hyperlink)
Rinse/lather/repeat
I have been able to convert about 150 links an hour.
Better then hand typing, but not like having java access to the links.
I am looking to improve the solution

Rick,
I didn't intend to say you must close the X box after each
apply. It's OK to apply one change and go to another item before
closing the dialogue. It's the OK button that messes up sometimes.
Even when you hit the Apply button for a very large selection
of topics, the OK button sometimes will undo the apply, not
necessarily for all selected topics. Even when you've made just one
batch change.
I think it's because OK tries to re-set all settings (that's
why it takes forever), but does not correctly pick up the mass
changes previously applied. Or maybe it takes forever because it
can't find the new info and defaults to the existing settings.
A pain in the butt when you're trying to apply a stylesheet
to a very large number of topics. Please don't ask me to define "a
large number."
Maybe it's a space limit in RH, similar to the space limit
for the number of characters in a batch of file names you want to
import. Or maybe the OK button doesn't look in the right places.
Harvey

Disable or Gray out the baseline field in miro

Hi experts,
Can any one help me for how to Disable or Gray out the baseline field in miro t-code
I tried for user-exit and also for badi but i didn't get it.
so please giude me
Thanks & Regards
Vishal

sorry,
it's baseline date fiels.

Change the starting timecode

Hi,
I don't understand why and when I need to change the starting timecode? what is the reason for this?
can someone explain to me?
thx

Because some broadcasters may require additional information before program start such as color bars, a slate, a countdown or a certain amount of black. You'd set the timecode start earlier to account for these elements. That's why program start is 01:00:00;00 instead of 00:00:00;00. Broadcasters often have specifications dictating exactly what should be shown at certain timecodes before the program starts.
Also, in Europe program start is often 10:00:00:00 so it allows you to change it to meet European broadcast specs.

Accidentally, I wiped out the start up system files.. How can I start up my Mac HD?

Accidentally, I wiped out the start up system files in my Macbook
Air.. How can I start up my Mac HD?

Reboot your computer. Hold down the option key when you hear the chime sound. Go to the recovery partition. Re-install the operating system. It's easy and doesn't take that long (15 to 30 minutes depending on your computer). By default it does an archive and install meaning that you won't lose your files, just read the screen carefully and you'll be fine. It's not a big deal.

Why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end. Constant

why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end. Constant rendering means its almost impossible to edit anything. Please help.

H TheGamer
What version of Premiere Elements and on what computer operating system is it running? It will not influence my answer but will give me information in case I need to get into version specifics to detail my answer further.
Timeline rendering is a preview matter. It does not fix anything, but it is your window of opportunity to catch of problem sooner than latter. If the Timeline rendering indicator displays orange (11 or higher) for the line above the Timeline content, that is the project telling you that you are not getting the best possible preview of the playback of that content in the Edit area monitor. And, every time you edit a file, you have altered the file from the time before. So, if you want to see the best possible for what you now have, you Timeline render. This is particularly helpful when you are dealing with titles, effects, transitions, and non native formats. You cannot turn off the Timeline render indicator system, at least none that I have ever found nor seen reported. You can do selective Timeline rendering by having the gray tabs of the Work Area Bar span only the Timeline segment that you want Timeline rendered.
Consequently, you either ignore the Timeline render indicator system, move on in the project, and take your chances in the outcome or you Timeline render to get your best possible preview if the Timeline render indicator is suggesting that you do so.
I am not approving or disapproving of this project feature, just commenting on the what is.
This is not Adobe. Rather user to user. If you want to have your voice heard at Adobe, you might consider filing an Adobe Feature Request Bug Report Form.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Please consider.
ATR
Add On...it is also possible to do Timeline rendering in a project, save close the project, and reopen it to find your previously "green" lined content now "orange", indicating unrendered. Yet the preview files generated originally by Timeline rendering are still existing in their hard drive save location. That is another story for other time.

Where is the start time setting in CC 2014.2?

Cant find the start time setting for the timecode in my latest version of Premiere.
thanks
Phil

Found it, its in the sequence tab. rightklik and there it is.

How to find out the save as setting information in illustrator cs3?

How to find out the save as setting information in illustrator cs3 through programmatically. I saved the file using the setting like Overprint, EmbedAllFonts, IncludeDocumentThumbnails throgh scripting. But i don't know how to find out the save as setting information(Overprint, EmbedAllFonts, IncludeDocumentThumbnails) whether the checkbox true or not through scripting. Kindly advice me.

Thanks for your response. Some time the operator will set the wrong "save as setting" in the eps file . So i need to check wheather the operator set the correct save as setting or not. If the operator set the wrong save as setting, i need to inform while running the script. So please advice me how to find out the save as setting information of the active document file, and then inform to the operator if any improper "save as setting" occured.

How can I customize Firefox to eliminate the function where the browser grays out the window in order to highlight a question box?

Ever since I upgraded from Firefox 3 (which I waited so long to do because I couldn't customize the newer Firefox the way I wanted to) to Firefox 14.0.1, I have had a problem.
I guess that one of the websites I visit is trying to imitate Windows, where the background becomes grayed out whenever it wants you to concentrate on a response box. So when I am on a third-party email site (Inbox.com), and delete a message, when the message box pops up to ask me if I really want to delete the message, the background becomes grayed out while the response box is displayed. This never happened on that site when I used Firefox 3, and I would like to prevent this from happening.
I have tried to manage this with an add-on (Element Hiding Helper for Adblock Plus), but it won't allow me to select the grayed out part of the screen the way it does with unsolicited "pop-ups".
Is there a Firefox setting or an add-on I can use to keep the background from becoming "grayed out"?
Thank you

Thanks for responding.
It isn't that there is anything grayed out that I need to see, just that it would be a preference of mine to not have the graying occur. It didn't happen in build 3.
It's just that something about the graying strikes me as "bossy", and since it's my computer (and I should be able to control it as I please), it irritates me.
To answer your other post, I don't want to upgrade to build 20. Actually, I would rather return to 3, just to keep things like this from happening.
In version 3, I also had more control over the autocomplete function on some websites. I'm not talking about the autocomplete that fills in forms or passwords, but the autocomplete that occurs when you type in a search box on a website. I had eliminated almost all occurances of autocomplete by using various different things, until I got Firefox 14. Now I have to put up with it on a few sites, including one that I use often.
Every time I get a newer version of Firefox, I have to accept more and more things that I don't want to have in my browser.

Anyone know why I can't edit my app screen when I plug in my 3g iphone now? I can edit all the other tabs, but my app tab is all grayed out and I can't add/edit any apps now. Please help?

Just last week, I plugged in my iphone 3g into iTunes and for some reason I can't edit my apps anymore. All the other tabs (music, video, etc.) are all fine, but my apps tab/screen is all grayed out. I can't edit any of my apps now. What's the deal? I can't seem to find anything similar on the support pages, so I'm desperate to find out what the deal is...please help!

Yes, it's checked as it's how I left it when I was able to edit the page before...now the whole tab is just grayed out and I can't check or uncheck anything. Nothing happens. So frustrated...thanks for any help or suggestions. I have multiple devices on my account and this is the only one that this is happening with when I connect to iTunes. Ugh!

TS1627 I had my hard drive replaced within the last month. Now I have trouble with the MAIL function. Sometimes it is open in the menu on top, but does not bring up mail. Then it grays out the QUIT MAIL function and I am stuck.

I have problems closing my MAIL. The function of Quit is grayed out. I cannot turn off the computer because it says mail still open. I have had this problem off and on ever since getting a new hard drive and reloading all the functions. The only way I can clear it is to hold the power button down till it shuts off the computer, and then restart it.

Cant get help with this issue on Apple Support, so I have to go to the Apple store to the Genius Bar to get assistance. All the help issues are so technical in their jargon, that I cannot understand how to fix the issue.

10.0.6 grays out the starting timecode setting in "edit compound clip settings"

Similar Messages

Maybe you are looking for