10.1.3.2.0 Mac OSX Freezes building class list

When I launch JDev 10.1.3.2.0 on Mac OSX, the status bar on the bottom of the app says "Building class list for project "ProjectName.jpr" and the animated status bar keeps cycling.
My CPU is at 100% and the java process is taking most of it.
If I remove the project from the application and restart JDev, everything is fine. The moment I add the project back into the application tho, it is stuck again.
This happened when I went to the application properties, and added two more JAR files to the application.
I have since removed these JAR files from the application, and removed them from the disk where they were... Still does not resolve the problem.
I have searched the forums, and can see that there was a problem with the preferences in the IDE, and deleting the preferences file fixed the issue - that's not the case for me. I tried to delete the file and restart, but I get the same results.
Short of reinstalling JDev, I'm not sure what to do...
Any thoughts?
Thanks.

It seems it was my error. After a few hours of debugging, I discovered that I had accidentally added "/" to the JAR Directory path - JDev was trying to search my entire hard drive for JAR files to add. I removed this entry, and all worked again...
Should the "Add Directory" function not limit itself to the selected directory instead of all sub-directories listed?
Thanks

Similar Messages

Mac osx freezes right after start up and all desktop files disappeared and the mouse can't click on anything..help?, Mac osx freezes right after start up and all desktop files disappeared and the mouse can't click on anything..help?

Mac osx freezes right after start up and all desktop files disappeared and the mouse can't click on anything..help?, Mac osx freezes right after start up and all desktop files disappeared and the mouse can't click on anything..help?

This is sometimes caused by Bad Blocks on the Hard Drive.
If 10.7, hold down Command-R at startup, and choose Disk Utility.
If 10.6 or earlier, boot to the Installer/Utilities DVD, answer only the "what language" question and wait for the MenuBar to be drawn. Choose Disk Utility from the Utilities Menu.
Select your Hard drive by Make & Model and check the SMART Status (lower right of the right window). Choose "Repair Disk" . This ONLY examines and repairs the Directory area of the drive, but may improve things a bit. If errors cannot be repaired, you may need a stronger tool, or a new drive.

Mac OSX freezes at startup

Today, my macbook froze while trying to open a adobe file. Force quite wouldn't work, so I pressed the power button. When I go to restart it simply stays at the apple logo screen with the progress circle. After searching around a little, I decided to start up in single user mode. I end up getting this never ending message
jnl: updatefsblock: error reading fs block #42** (ret 5)
disk0s2: 0xe0030005 (Undefined)
* Number is different every time
I tried putting my install disk in and was ready to re-install, but no hard drive ever even comes up. Disk Utility just stays searching also. I know this sounds like a hardware issue, but FWIW this computer stays on a computer desk and is hardly ever moved.

Hi Drew, and a warm welcome to the Forums!
I know this sounds like a hardware issue, but FWIW this computer stays on a computer desk and is hardly ever moved.
Unfortunately, that's not the big factor.
Laptop drives are the shortest lived of all drives.
Might try this, restart your computer, hold down Command+s and type in the following:
/sbin/fsck -fy
then Enter
repeat until no errors.
It really sounds like the HD died though.
If DiskWarrior can't fix it, you might try Data Rescue II...
http://www.alsoft.com/DiskWarrior/
http://www.prosofteng.com/products/data_rescue.php
(Has a Free Demo to see if it could or not, but you'll need another drive to recover to).
Or FileSalvage...
http://www.subrosasoft.com/OSXSoftware/index.php?%20mainpage=product_info&productsid=1
to recover what you can.
My advice, get an external Firewire drive, install OSX to that, boot from that, try to recover what you can.

VISA Mac OSX App builder?

Hi All,
After a bit of a rocky start, we have a pretty nice LabView 7
application on Mac OS X. We are now trying to wrap the application up
so that others can use it without LabView. We got project builder to
work and our application starts up fine. We have a toggle switch for
simulated data versus actually talking to the serial ports via a
keyspan. However, the VISA drop down menu of ports won't work on a
laptop that just has the Mac OS X runtime. I then tried to run the
VisaConfig application, but when i break into the app and run the
actual executable, it gives me an error that it can't open the VISA
library in library/Frameworks/VISA.framework/Versions/A/VISA.
So how do we create an application using the builder that people can
use wi
th serial visa? I saw a windows VISA 3.0 installer on the web
page, but nothing for mac? What am I missing?
Also, we have a problem in that one of our devices holds a serial pin
high that seems to be causing the VI's to print themselves. When we
disable the printing, the next VI up the chain prints itself. Anyone
found a good solution for this other than a custom serial cable? This
device is from the early 80's and is not easy to modify, so we would
like to just alter the VI's somehow to ignore the print even.
Thanks!
-kurt

Thanks to those who emailed me the solution. I just didn't see the
mac VISA runtime on the web pages.
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BAC002C51FA?opendocument&node=132070_US
Works great now!
Still wondering about the printing troubles... anyone have a clue on
this one?
-kurt
[email protected] (Kurt) wrote in message news:...
> Hi All,
>
> After a bit of a rocky start, we have a pretty nice LabView 7
> application on Mac OS X. We are now trying to wrap the application up
> so that others can use it without LabView. We got project builder to
> work and our application starts up fine. We have a toggle switch for
> simulated data versus actually talking to the serial ports via a
>
keyspan. However, the VISA drop down menu of ports won't work on a
> laptop that just has the Mac OS X runtime. I then tried to run the
> VisaConfig application, but when i break into the app and run the
> actual executable, it gives me an error that it can't open the VISA
> library in library/Frameworks/VISA.framework/Versions/A/VISA.
>
> So how do we create an application using the builder that people can
> use with serial visa? I saw a windows VISA 3.0 installer on the web
> page, but nothing for mac? What am I missing?
>
>
> Also, we have a problem in that one of our devices holds a serial pin
> high that seems to be causing the VI's to print themselves. When we
> disable the printing, the next VI up the chain prints itself. Anyone
> found a good solution for this other than a custom serial cable? This
> device is from the early 80's and is not easy to modify, so we would
> like to just alter the VI's somehow to ignore the print even.
>
> Thanks!
> -kurt

A few times when i try to quit out of firefox, it causes my new mac osx (version 10.6.8) to freeze--turning the whole screen whitish blue, which is the same color before the mac is to shut down. Why??

Three times over the last three months when i try to quit out of firefox, it causes my new mac osx (version 10.6.8) to freeze--turning the whole screen whitish blue, which is the same color before the mac is to shut down. Why??

http://www.apple.com/support/mac/app-store/contact.html?form=account

HT203176 cursor freezes on mac osx 10.8.5

cursor freezes on mac osx 10.8.5 have to re-launch finder to regain control, using wireless mouse.
This happens at various times but more noticable after wakeup.
Any ideas?

When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I'm using firefox 1.0.6 on a Mac OSX 10.3. Firefox is crashing and freezing frequently. I've heard that My firefox version is too old to update and I also need a new computer. What can I do? Thanks.

I'm using firefox 1.0.6 on a Mac OSX 10.3. Firefox is crashing and freezing frequently. I've heard that My firefox version is too old to update and I should get a new computer. I can't upload art to my website. News articles freeze constantly. Firefox shuts down when I go to certain websites. What can I do? Thanks.

I'm using firefox 1.0.6 on a Mac OSX 10.3. Firefox is crashing and freezing frequently. I've heard that My firefox version is too old to update and I should get a new computer. I can't upload art to my website. News articles freeze constantly. Firefox shuts down when I go to certain websites. What can I do? Thanks.

Firefox v15 and up cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15-30 seconds and forces me to turn it off with the power button

Firefox v15 and up cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15-30 seconds and forces me to turn it off with the power button. It only causes this after I have opened Firefox, my computer runs fine before opening Firefox. I have uninstalled Firefox and cleared my personal settings. I have installed future updates (16 and 17) and have run into the same issue. I cannot pull any information on RAM or CPU usage because when it happens it makes my computer unusable. Unfortunately I need to use FF for work and can't. I have tried the different responses on the forums to reduce the amount of RAM and CPU usage with no change in performance.

Duplicate of https://support.mozilla.org/en-US/questions/944207

MacBook pro late 2011 i7 8GB 750GB MAC OSX Lion freezes on wake up

Hi,
My MacBook pro late 2011 i7 8GB 750GB MAC OSX Lion (up to date) 1 week old freezes on wake up.
Plugged on power or not, same issues.
No apps running.
When it goes to sleep itself i wake it up it freezes for few seconds
When i put it to sleep mode same issue.
With the lid same issue...
I already try setting up the sleep mode from 3 to 0 with terminal command it didn't work.
Can it be an hardware issue ?
Any ideas ?

Dear TheSmokeMonster, Dear all MacBook pro 13'' late 2011 users,
Here is the update.
As TheSmokeMonster mentionned (above) they asked me to reinstall MAC OSX Lion by shutting down the computer and holding cmd + R while switching it off. Then you choose the language and you are good to go for a looooonngg 4GB download (it took me 8hours yeah chinese ADSL :-/ )
Lion reinstalled itself automatically and restarted. - it did not solve the issue.
I called Apple Care again and we try to run the hardware diagnostic by restarting the computer and holding D. FYI do not try it as this command does not work on the new version of macbook pro.
Here is the intersting part! As the Apple Care already did everything they could to help me. We booked an appointment the my local Apple Store in Shanghai (a real one )
The Genius remake again the SMC and PRAM reset - same issues and he also tried to boot Lion from his own external hard drive - Same issues. So we started to think that it was a Hardware problem.
We tried another MBP 13'' late 2011 (last hardware update) in the shop to see if it works properly and it DOESN'T!
Yeah you heard me. I have been trying more than 10 MBP 13'' (2.4Ghz 4GB and 2.8Ghz 4GB) put them asleep and they all freeze on wake up!! it also does it on Mac book air 13'' it seems to be a global issue on all the new 13'' machines. A compatibility problem between Lion and the new hardware architecture of the 13'' ? just my guess.
Anyway FYI this issue doesn't occur on MBP 15 and 17"
I was just amazed by this global problem so was the genuis. We could not find any solutions cause even a replacement one will have the same problem. They told me i could change for a 15" but i had to go back to the Apple shop where i bought it which is 2000Kms away not really convenient So i file the cas and i took my MBP 13'' back with me.
They will contact me later for further explanation.
To be continued.

Mac OSX 10.5.8 Freezed - a way to do it

Hi. This is not really a call for help, I only want to share this with you.
Sometimes I use my cell phone to an emergency connection to Internet - when the official way is down. I call for it at preferences panel by bluetooth, and MacMini call my cell phone. A window opens in my Sony Ericsson w300i asking for my permission. If I click OK, thats fine, but if I (by mistake) click NO, appears the multicolor circle, rounding, and rounding... and nothing elese works (yes, not even commandaltesc).
This happens every time I click no. I can't remembar other situation like this, freezing is a rare event in Mac OSX, and I never know when it will be (most of times with Flash, but do not crash all system).
Somebody may try this in other Mac to verify if is my hardware/software or some bug of 10.5...

Funny, nobody found this, at list interesting...

Mouse/program freezes in Mac OSX Mavericks

I recently updated my 2.8 GHz Intel Core i7 iMac to Mac OSX Mavericks (8GB RAM).
I'm using an Apple wireless bluetooth mouse and keyboard.
I'm now getting frequent freezes. The cursor can be moved but I am unable to write or click on any window. Only way to resolve this issue is a hard reboot.
Additionally, programs (Safari, Microsoft Office) sometimes freeze/stall with the spinning beach ball.
Overall the system is much more sluggish.
Any suggestions ?
I'm wondering if these problems are related to syncing services, e.g., Adobe Updater (really annoying when it interrupts/blocks workflow daily with another update check) or iCloud and Dropbox (check mark indicates up to date) - although superficially I don't see them active at the time of the freeze.

Hi farpelix,
Thanks for visiting Apple Support Communities.
If your Mac is unresponsive and you think it may be related to software you've installed, try testing by booting into safe mode and creating a test user:
Mac OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
Mac OS X: Starting up in Safe Mode
http://support.apple.com/kb/HT1455
If your system is responsive is responsive safe mode, this usually means OS X is fine, and the issue is caused by conflicting software in your user account.
Next, see if it behaves normally in a new user account. The steps in this article also apply to creating a new user in Mavericks:
OS X Mountain Lion: Create a new user account
http://support.apple.com/kb/PH11468
Best,
Jeremy

Since the upgrade to 4.0.1, both of my mac osx computers get multiple popups, despite being enable, and slow tracking and frequent freezing

Since the upgrade to 4.0.1, both of my mac osx computers get multiple popups and popunders, despite the block popups being enabled, as well as slow tracking(at regular card game sites, and frequent freezing of open windows.

Honestly I would never run both Win 7 & XP at the same time in a VM. 7 needs at least 4GB to run properly and uses more resources then XP.
I personally use VMware Fusion and XP. At this time there is no software, that I'm aware of or use, that does not run on XP. So for my Mac Win VM purpose I only run XP with the software in need to use in Windows. This work very well for me. I have 2 CPUs and 3GBs of RAM assigned to XP. Leaving the other 2 CPU cores, 4 HT cores, and 5GBs of RAM for OS X.
Not sure why you need, or want, to run both versions of Windows at the same time. I don't see the need as stated above.

Indy freezes on Mac OSX 10.6.3

Any know issues so far with InDesign CS4 running on latest Mac OSX 10.6.3?
A user had informed me that he just upgraded from Leopard 10.5.x to Snow Leopard 10.6.3 today, all other Adobe applications running well, except InDesign.
InDesign launches alright, and even able to create a new document, but once the user clicks on any icon within the document, the Mac beach ball spins forever, user have no options but to force-quit InDesign!
Apparently resetting preferences didn't fix the problem.

This is a good point Bob, If no issues were reported so far on any conflicts between 10.6.3 and InDesign CS4, then it is most likely this particular user need to have a fresh and clean Snow Leopard installation… Thanks
Eugene, user says he updated to latest Indesign version.

Lion osx freezes my mac on start up.

Have gotten a very frustrated with Lion. Having been forced to upgrade to lion because of the iCloud switch over, then finding out that Final draft 7 (the format I do most of my work in) will not work on Lion so I had to purchase and install FinalDraft 8, my mac now freezes when I try t turn my computer on.
I can't work. what do I do?

Hold Shift Key upon boot, that should temporarily disable any kext files in OS X, perform some repairs etc.
Perhaps you might want to reinstall just/only Lion again to get a cleaner copy
https://discussions.apple.com/docs/DOC-3046

Emac freezes on mac osx screen after upgrade

I recently bought the new keyboard and downloaded the upgrade through the apple website. My System update started at the same time and it upgraded the most recent iphoto and osx powerpc update. Im running tiger on my emac and it was fine till I re-started. When it starts back up, the screen goes to the screen with the grey apple and then proceeds to the screen where the chrome mac osx is about to start up but it just sits there. I tried booting up with safe mode but it doesn't do anything and I tried starting it up doing the shift/command/option/delete and that doesn't do anything as well.
Did any of the updates cause this problem and if so, how do I get into my computer to fix this if it won't let me in with all the reboot options. Any help would be appreciated.
Thanks
M

Same boat as miQ: This eMac (1.42GHz, 512MB RAM) hangs at blue screen after Apple logo/gear and before startup progress bar. Tried reformat/zero then install Panther, but machine will not boot from Panther install disk (produces broken Apple logo and hangs). Erase/reformat and install Tiger = OK, but machine only boots in SafeMode (normal boot = blue screen). Started with 10.4.0 and updated to 10.4.11 by restarting in SafeMode with updates, no change. Disk Utility = all good (in SafeMode).
Lost audio somewhere along the way, too: No startup tone, Sound Prefs say no output device detected, mute is checked and unavailable, sound menu vanishes from menubar when clicked. (Speakers are built-in and connected, just as they were when we started.)
Boots in SafeMode, works as expected, but normal startup hangs at blue screen, 100% of the time. While 512MB RAM isn't much these days (2x256 verified), it should be enough for a fresh install and OS only, no? Firmware issue? (Won't boot from Panther or OS9.) Boots into Startup Manager (w/option key) and shows internal HDD: Then, Apple logo, gear, and blue screen, as usual. Goes to sleep eventually, then refuses to wake. Logic board? Sure acts like a software issue.....
Any suggestions/ideas/clues would be greatly appreciated. Thanks!
Mike

10.1.3.2.0 Mac OSX Freezes building class list

Similar Messages

Maybe you are looking for