10.2.1.1 crappy issues

if i try to close itunes, it keeps restarting.
when i'm in the itunes store, if i type a character into the search field, i get an "accessing itunes store pop-up," after EVERY CHARACTER.
anybody else with these issues or know of a fix?
tia.

This is likely because the certifcate was issued by the GlobalSign Root CA.   KB35687 covers this.  The workaround would be to untrust the expired GlobalSIgn Root CA on the device.

Similar Messages

  • IWork Disc Not Reading

    Hi All, didn't know where to post this so I'll try here.
    Just received the new iWork '09 DVD, along with the new iLife DVD. iLife installs fine.
    However, my MacBook won't even READ the iWork DVD. I've also just installed Snow Leopard, no problem. So my DVD drive is working fine .... must be a faulty DVD .... BUT, the iWork DVD loads fine on my wife's MacBook .... so the DVD seems okay on HER machine.
    This is just not logical...
    Any thoughts?
    Bill

    Hi Peter
    Never thought of the salt solution ... must try that.
    No, the better half's Book doesn't have Snow Leopard but iLife installed with SL on mine! This is weird. I'm going to take the DVD to NextByte and see what they say.
    So far SL isn't an obvious change apart from some visual enhancements. It's all under the hood. Time Machine backs up faster (which is all I've done so far). I'd give you feedback on how much faster iWork is but, well, you know how that's going!
    Oh, one BIG crappy issue ... it won't connect to my wireless network. Others have this problem too so it;s not just me - gettin' paranoid here!
    Thanks for replying. I'll hopefully get this resolved soon. Otherwise ... waste of freaking money!

  • Send data from bean to servlet and get results back to bean

    Hi,
    I'm new to this helpful forum and, as long as I'm practicing with JFS and Java Beans and Servlets, I really need some help about the following crappy issue.
    I made a JSP login page called "LoginPage.jsp" (using "Visual Web JSF Page" tool in NetBeans 6.0), and the action associated to the "Login" button pression is defined in the associated Java Bean "LoginPage.java":
    Code from "LoginPage.jsp":
    <webuijsf:button actionExpression="#{LoginPage.loginButton_action}" binding="#{LoginPage.loginButton}" id="loginButton" primary="true" style="height: 24px; left: 383px; top: 192px; position: absolute; width: 96px" text="Login"/>
    Code from "LoginPage.java":
    public String loginButton_action()
        if (usernameField.equals("guest") && passwordField.equals("guest")) // this control should be done by a servlet, not here!
            return "loginOK"; // this is the outcome for faces-config.xml that will lead to a "Welcome.jsp" page
        else
            return "loginERROR"; // this is the outcome for faces-config.xml that will lead to a "Error.jsp" page
    ...Now, the problem is that the username and password control should not be done by the bean itself, but by a servlet (call it "LoginServlet.java").
    In a few words, what I mean is that once the user writes username and password and presses the "Login" button, the called "loginButton_action()" forwards all the needed data to the servlet "LoginServlet.java", the servlet does the complete checks about login validity then prepares the result (it could be a string reporting "OK" or whatever else) and send it back to the bean "LoginPage.java", so that the flow can continue.
    My problem is that I absolutely don't know how to make a bean and a servlet communicate in both ways and respectively exchange data.
    Thanks in advance for any help, it will really be appreciated.

    Google for passing values in request and session.

  • ORA-19502: write error on file ... (blocksize=8192)

    Dear DBA's,
    I'm facing an incredible crappy issue with RMAN and I don’t see where it come from.
    Target Database is OS is RHEL5 with ORACLE 10.2.4
    The RMAN repository is RHEL5 in Oracle 11g2
    In the host there are 2 databases CFM1 and DMB1 and both are backup with RMAN in same Repository. In DMB1 I don’t have any issue
    With CFM1 I’ve this error Message every time I run a Backup as follows :
    RMAN> run
    2> {
    3> sql "Alter System Switch logfile";
    4> sql "Alter System Archive Log Current";
    5> Backup device type disk database plus archivelog;
    6> Backup current controlfile for standby;
    7> sql "Alter System Switch logfile";
    8> sql "Alter System Archive Log Current";
    9> Backup filesperset 10 ArchiveLog all;
    10> }
    sql statement: Alter System Switch logfile
    sql statement: Alter System Archive Log Current
    Starting backup at 12-MAY-10
    current log archived
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=226 devtype=DISK
    channel ORA_DISK_1: starting archive log backupset
    channel ORA_DISK_1: specifying archive log(s) in backup set
    input archive log thread=1 sequence=43392 recid=36539 stamp=718803231
    input archive log thread=1 sequence=43393 recid=36540 stamp=718803232
    input archive log thread=1 sequence=43394 recid=36541 stamp=718803240
    channel ORA_DISK_1: starting piece 1 at 12-MAY-10
    channel ORA_DISK_1: finished piece 1 at 12-MAY-10
    piece handle=/backup/ORA_BACKUP_CFMT/CFMT_120520100512_full_28ldg499_1_1 tag=TAG20100512T113401 comment=NONE
    channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02
    Finished backup at 12-MAY-10
    Starting backup at 12-MAY-10
    using channel ORA_DISK_1
    channel ORA_DISK_1: starting full datafile backupset
    channel ORA_DISK_1: specifying datafile(s) in backupset
    input datafile fno=00031 name=/u01/oradata/CFMT/data/iws_data_02.dbf
    input datafile fno=00028 name=/u03/oradata/CFMT/index/tools_01.dbf
    . Then It goes trough several datafiles
    input datafile fno=00004 name=/u02/oradata/CFMT/system/users01.dbf
    input datafile fno=00014 name=/u01/oradata/CFMT/data/iws_data_01.dbf
    channel ORA_DISK_1: starting piece 1 at 12-MAY-10
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of backup plus archivelog command at 05/12/2010 11:35:29
    ORA-19502: write error on file "/backup/ORA_BACKUP_CFMT/CFMT_120520100512_full_29ldg49c_1_1", blockno 734721 (blocksize=8192)
    ORA-27072: File I/O error
    Linux-x86_64 Error: 9: Bad file descriptor
    Additional information: 4
    Additional information: 734721
    Additional information: 917504
    I've check in Metalink and open a Sr and so far no answer !!!
    Any ideas ?
    Txs
    Carlos

    Txs for your reply,
    But the ID you Provide doesn't help
    Solution
    Options to resolve:
    1. Clean up unnecessary files on /oracle/u08.07/ - The File System as Enough Disk Space
    Filesystem Size Used Avail Use% Mounted on
    9.9G 3.8G 5.6G 41% /backup/ORA_BACKUP_CFMT
    2. Add disk space to /oracle/u08.07/
    As you see ther's enough space.

  • !!!!!!!!!! HP C4180 ALl-IN-ONE printer ON a 175X external jetdirect printserve​r ISSUES

    Hi,
    its my first post here,   so HELLO to all
    i recently bought a printserver,   its a Hp 175x USB external jetdirect printserver  (can these names be any longer pfff)
    And my all in one printer is a HP C4180 .  
    I hooked everything up,  all lights are sollid as they are supposed to be, so no issues there.  If i press the testpage button
    It prints a nice page on the printer,  so all works from printserver to printer.
    BUT,  when i try to print anything from my PC it doenst work.
    I tried running the CD and it cant find the printer in the network.
    I DOUBLE CHECKED ALL WIRES
    What can i do to make everything work??
    The purpose is to be able to use the abbilities  (sorry for the crappy english, im belgian) 
    of the all in one printer in the entire house,  which are about 4-5 PC's.
    So they all have to be able to print and scan.
    HELP PLEASE

    Hello,
    Generally Print Servers are designed to be used for printing purpose. However in certain cases, we can use the EWS to complete the scan process.
    Here is a link to the old forum which discusses the procedure to scan from the EWS.
    http://forums13.itrc.hp.com/service/forums/questio​nanswer.do?admit=109447627+1298994065288+28353475&​...
    My suggestion is to get to get a network AIO to get complete functionality.

  • I am so sick of the crappy way iTunes and iPad handle app folders.

    I'm a long-time iPad user who, for various reasons, has accumulated over 500 apps. It is absolutely essential that I keep my apps organized into folders. This requires a lot of folders, too: with a maximum of 20 apps per folder, that's at least 25 folders.
    What prompted this message is that after the last time a major software update decimated my carefully-constructed folder organization (which itself is inexcusable), I spent two hours with the horrible iTunes interface dragging and dropping and creating new folders and getting everything re-organized, finally, only to have iTunes fail to sync the changes to my iPad.
    It synced, but afterwards, the iPad still had its old folder layout, and iTunes still indicated the new one. I power-cycled the iPad and tried syncing again: same thing. I quit and re-launched iTunes and synced again, and lo, iTunes wiped all the tedious work I'd done and just copied the defective organization back from the iPad into iTunes.
    This isn't a one-time thing. It's consistently been the most time-consuming, time-wasting aspect of owning an iPad, and really, it's inexcusable for Apple to have let this go on and on for so long.
    Why not just let them float free instead of constantly hitting my head against the "folder wall" and gradually move the ones I use a lot to early pages? Well, it turns out that if you have too many apps installed, the iPad doesn't show them all: there's a limit to how many pages of apps it will show. Dang it.
    Why not use the search page to get to my apps? Well, I could, but some of them are named in unfortunate ways. (Also, when you search for an app, it doesn't indicate whether it's located in a folder nor in which folder it's located. That's not just stupid: it's caused me to go manually poking through folder after folder to find an app that I've "mis-filed".)
    And if you have multiple iDevices? I recently jumped from Android to iPhone, and guess what: I had to go through the whole, pain-staking process of creating a folder organization for the phone, because I couldn't use the iPad's as a template. I did learn my lesson, though: the iPhone only has installed the apps that I use on a regular basis. At least that cuts down on the length of the pain if not the intensity.
    C'mon, Apple, get a clue! This app folder "organization" is about as crappy as it gets. (Though you have a bad history of poor organization: how long did it take to get photo albums?) Please, please, please, if you can't at least get the novice-programmer-stupid-bugs out of your folder sync/iTunes logic, come up with an alternative.
    Here, I can think of a REALLY EASY one right off the bat: let me tag my apps and search/access them via tags. (Oh, say, then maybe I could just have a "smart folder" to make them easier to find.) (What? Be able to organize apps in more than two dimensions?) Or at least make the drag-and-drop-to-move-apps interface (on both the iPad and iTunes) less fragile and frustrating.
    Back to bashing my head against the wall... thanks for listening.

    I've had a not-so-rewarding experience with one of Apple's support-issue-submission forms. It was a reminder that as much as I'd prefer to think otherwise, Apple may be unusual, but it's just another company where it's not possible for everyone to be "above average".
    Frankly, I'd be happy in this case if iTunes dropped an XML file with apps-in-folders, let me mess with it, and then loaded and applied it to shuffle things around. That's one thing I love about OS X, but then that also allows one to be too smart for one's own good. Be careful what I ask for, I guess...

  • Issues With GameCanvas Performance

    Hello, recently I've been toying with java mobile applications, but I've run accross a problem I cannot overcome.
    My LayerManager has two objects: the sprite and the tiled layer. Whenever I add the latter to my layer manager, I get 1-2 FPS when rendering the screen, but if I remove it and have only the sprite displayed, I get above 30 FPS.
    My layer has the following properties:
    TiledLayer mbg = new TiledLayer(15,20,tiles,16,16);
    Any help appreciated.
    PS: Getting 1-2 FPS on a crappy computer, but the same application running on a fast machine won't get past 11 FPS, although the main game loop is supposed to run at 20 FPS.
    Edited by: 860823 on 23/05/2011 12:13

    I already replied there but it seems no moderator is willing to approve my reply so it never shows up.
    So I'll try replying in here instead:
    I never thought it could be an emulator issue, I thought I had done something wrong to begin with. So I take having performance issues with tiled layer is not a common problem I suppose?
    I'm using MOTODEV SDK platform, A1200 model (motorola).

  • ITunes 11.0.2.26 issue for Windows 8 Pro "app store is blank" in iTunes Store

    Hi,
    I recently updated my iTunes software to 11.0.2.26 in my Windows 8 Pro 32bit OS. Since then I was puzzled why I am not able to view/access my iTunes store in iTunes as app store is complete blank. Where as I was able to do all other things like syncing my iPhone4s with music & organise it through iTunes.
    But I am facing issue only with iTunes store which is a very critical bug to be considered by iTunes support as customer couldn't be able to purchase new apps through iTunes store.
    Note: I event can't be able to update the already installed apps through iTunes where as its showing more 32updates available all time but the update button is teasing me with out any action.
    Will be looking forward to fix this issue or release next ver. of iTunes ASAP.
    Regards,
    Feelme

    Thank god finally my iTunes store is visible now & came back to normal form after uninstalling the "speedbit video downloader" software from my winows 8 PC.  My puzzle solved finaly but still I want to raise my concern to iTunes developers "Why I need to uninstall third party apps to make my iTunes work properly?"  If this is the case all the iTunes users need to restrict themselves and need to spare a lots of their time to investigate before installing other Windows apps.
    @Caffineohoic: I can understand ur frustraion dude as I too gone through it till now. My crappy update might not solve ur problem but it worked for me as I followed the steps properly. Wish u good luck.

  • ITunes on Windows 7 performance issues - slow and hangs

    Is there any way to improve performance of iTunes running on Windows 7?
    It has always been slow with lots of application hangs and stalls that will resolve themselves if you wait for iTunes to catch up, but I find it incredibly frustrating.
    For example, when iTunes starts and if it is checking podcasts, the entire application is unresponsive until it finishes checking and refreshing podcasts.
    Alternately, when viewing my iPad Air and looking at the list of apps installed via iTunes it can take 30 seconds before iTunes responds.
    Considering that this is running on a system with a quad-core Haswell processor at 3.2Ghz, 16GB of RAM and Windows 7 x64 it is pretty unacceptable.
    The efficiency at which iTunes operates is just appalling.  I can run Adobe Photoshop and many more memory hungry and processor intensive applications than iTunes and get better performance than what I see in iTunes.
    This is not specific to my system either.  All of my family members have iPhones and their own computers and this performance issue exists on every computer I have ever run iTunes on.
    Is there any way to manually tune performance because this is pretty crappy.  It's been bugging me for years, but today just kind of feels like the last straw.

    I guess the answer is, "It's terribad, live with it"

  • Animated .GIF Issue Need Help

    I made an animated gif with a transparent background, saved it for the web with the best quality settings I know of, and the image gets this weird white outline around it. Here's what it looks like on grey background so you can actually see the issue I'm having: http://imgur.com/ujKBJDu
    at first I thought it was an anti alias issue with my crappy laptop, but then when I exported it on a high end gaming pc it looked exactly the same. Anyway I need to export this and not end up with this issue so any help is appreciated.

    When it comes to gif, there is no anti-aliasing. As the transparency has only one shade of grey. The white line is residual from a white background.

  • Internet/Router issues and new "secure email"

    I'm supposed to have a 35MPS internet plan. When I switched to the higher speed plan, I paid for the Verizon router and installation.  I have both a Mac and Windows 7 Laptops as well as an older netbook.  To say that the wireless connectivity sucks would be complimentary.  I've used the automatic troubleshooter....I've looked through forums and followed advice on settings etc...with no joy.  Before I "upgraded" I had my own belkin n router.  Even though the router is downstairs in an office , with the belkin, I could connect on my back deck and all but the furthest upstairs rooms in the house.  Since I "upgraded"  the wireless won't stay connected with line of sight 8 feet from the router so we have cables trailing thru the living room.  For the brief moments when wireless is connected it is slower than dial-up.  The cabled connection seldom exceeds 10MBPS ( this is where they tell me the plan is "up to" 35MBPS")
    We have a mountain home with DSL and a VERY basic wireless router.  Both the Mac and PC connect effortlessly and even my very untechsavvy wife mentioned how much faster the 3MPBS DSL service is than FIOS.  Her next question "Tell me again why are we paying so much for FIOS?"
     The latest debacle (forget that companies choose to not learn from others mistakes, think Netflix here) is the new secure email settings. I updated my Mac and my android in strict compliance with the Verizon directions and for a few minutes all was well.  Today I can't connect through my android.  An "authentication error receiving" message show up with a note to check my settings only I HAVEN"T CHANGED MY FLIPPING SETTINGS!  Now I have to go in and re-enter my account password several times a day to get into my email account when the PW is stored in my phone!  I consantly have to rest the Mac as well. (Hmmm no yahoo, gmail  issues and they are free....)
     To be fair I haven't called in the issue with the wireless connectivity because I have called before on other issues and frankly I don't have the time to wait on hold.  The last time I had a "technical problem" with my service I ended up telling the tier 2 tech how to fix the problem. 
     As a Quality Assurance /Customer Service professional,  the one thing I can tell Verizon is that there is no marketing campaign that will overcome word of mouth reports on poor service and response.  I installed FIOS years ago when it was first available in my neighborhood.   Service was reliable, customer service responsive and capable.  That all seems to have gone by the wayside to improve the bottom line.  Volume can go a long way to masking attrition for quite a while, but it isn't sustainable.  The cable companies in my area have an even worse reputation which is the only reason I've not yet left...and that's a really crappy reason to stay.
    I understand that it's the processes and the system which are hosed up.  The poor CS reps are customer facing and they take it on the chin for every corporate decision viewed as stupid by customers. There may be a few really bad customer service reps, but the majority of  CS reps DON’T come to work to see how many customers they can **bleep** off.   CS Reps are only as good as the process under which they must work.  When working with organizations and speaking with CS reps one question I always ask is "How long would you put up with what you put out if you were dealing with another company?"  Then I suggest that the leaders/managers attempt to call in with a problem using only the same avenues available to paying customers.  
    Companies should also must realize that the "cancellation fee" they threaten people with is usually about a month and a half worth of service.  After that it's money back in the consumers pocket, or more likely into competitions pocket and not in Verizon’s pocket.  It’s the principle of the fee that keeps customers hanging on.
    Now that I’ve vented if anyone can tell me a better router to use than the one Verizon gave me, I’m all ears.  I really don’t care about remote accessing my DVR.

    NavyCPORet wrote:
    ...Before I "upgraded" I had my own belkin n router.  Even though the router is downstairs in an office , with the belkin, I could connect on my back deck and all but the furthest upstairs rooms in the house...
    ...Now that I’ve vented if anyone can tell me a better router to use than the one Verizon gave me, I’m all ears.  I really don’t care about remote accessing my DVR.
    Since you already have the Belkin and know that it works well, I would suggest hooking that up to the Verizon-supplied router and using that. Turn off the wireless from the Verizon router.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • Freezing and issues on STB Model QIP7216

    So I've had Verizon FIOS now almost a year. I'm on a QIP7216 STB running version 1.7.
    I've been experiencing problems in the following areas;
    • Recorded programs freeze upon play back. STB also seems to freeze momentarily hang until last command can process/complete itself.
    • These same programs (sometimes not all the time) can experience pixelazation
    • Multi-Room DVR playback on recorded programs also do the same. The recorded event seems to have been recorded with the freezing in the recorded session. Therefore any playback of that recorded item experiences the freezing.
    • Regular program playback intermittently experiences freezing (just watching TV sometimes I experience freezing)
    • Recorded programs (sometimes) are recorded in chunks where up to 4 events appear as the same recorded event. The program is chopped up and divided over several listings with random lengths. (this appears to be some sort of reset on the STB and it goes back into record mode once it resets)
    Background Story: All this occurred after I requested and placed an order for Verizon to move my STB HD DVR from one side of my house to another. At the time of the placed order request was made I was asked by service person on the phone if I wanted to experienced HBO/Cinimax for 3 months free. I said yes (That was where things went bad)
    Possible Solution and Resolution: Here is what I think happened based off what I've found in the Fourm and what I've troubleshoot myself. I found out when I had my STB's installed I had too high of a Coax Signal (Called SNR for you Verizon Techies) coming into the STB's (Common install issue!!!) Contractors who do the installs do not check for this. Typically FIOS Signal coming into house terminated with a very high signal strength, this signal is call SNR signal, If your SNR is too high you have to place attenuators on the end of your COAX before plugging into your STB. The signal strength must be approx -6db my STB's ranged from +18 to +8. I have 3 STB's in my house. After placing the Attenuators on the signal registered just under -1 almost -2. Second Possible Solution that seems to have resolved my problems: I noticed that once my HBO/Cinimax order went through I started to notice the Freezing began. I found in the Forum that this is caused by a problem where the STB holds on to old codes after the programming is upgraded. To fix this you need to call support Request the TECH perform a Soft INIT (Not a Hard INIT this will cause you to lose all your DVR Programs However, if they are crappy and messed up from Freezing you'll most likely have to erase them anyways) (Don't do the reset over the web, this Soft INIT is a different Init) The soft INIT will cause the codes to come back down to your STB and program your STB for the proper programming.

    Hello Internetkid ,
    For your possible solutions and resolution you are on the right track.  The issue I see with what you have done is putting the attenuators on the end of the coax.  With Fios, a lot of the features run on moca (multimedia over coax alliance).  The attenuators  at the end of the coax prevent the moca from flowing properly. To prevent this place the attenuators  on the feed or input going to the main splitter, or to each splitter that feed your stbs.  This will eliminate pixelation on vod, mrdvr.  Another option is to replace the main splitter with a splitter that has more db loss to it (ie: 6 or 8 prt splitter)  this will most likely eliminate the need for attenuators. 
    Frank
    Verizon Telecom
    Fiber Solution Center
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

  • HP 6600. I always get the issue scanner unreachable

    When I go to scan a document or photo, I get the error, scanner unreachable. When I try manage scan to computer, I get, scan to computer is unavailable.  When I go to my printer, sometimes my computer is not listed, sometimes it is. It is currently listed, so I tried to scan from there, I get error messages.
    I have been having this problem for over a year. I bought this printer  June of 2013 for its feeder scan. It seemed to work fine.  Then we moved in Nov 2013, and it has not worked since then, So it makes me wonder if it is my internet, My internet provider tells me they know it is crappy and they are working on it, but I have no other choice. It is very spiky.  I have tried the HP doctor, and since I had to update it  to 4.6 yesterday,it doesn't work, it finds my printer and then it says it has stopped working. But who knows, tomorrow it may work. 
    Tried using the printer home page feature, 10 minutes ago, itwas something like web page not found, but now it is working, I tried  scan to computer there, and it says You cannot use this function because it has been disabled. For more information, contact your network administrator or the person who set up the printer. 
    Good thing, I still I have my Epson scanner, which I usually use for printing and scanning, because I have no issues with it. But I want to scan multiple pages of documents. 
    Update: tried to scan from printer again, computer not listed again. uggggghhhh. Can someone help me with this. 

    June,
    Printers are not all equal.  Routers are the same: some are better than others.  That is why it is a balancing game, even given that one has a decent network to begin with.  I don't know whether your network is OK or not -- I don't have the tools, the time, nor the inclination to delve into it that deeply.  I am not being rude -- you are in a tough spot if you don't have decent ISP service because the onus falls on you to know more than the average home user needs to know about his / her network.  The information is out there; it can be a real mess to wade through it and figure out what is going on.
    In General, printers work better than this.  In general, networks are not flakey.  Of course, based on the number of complaints you see on forums, you would think nothing works - ever.  But there are millions of working printers and networks all over the world and people don't complain about stuff that works.
    Plus, and this is the most important bit:  I am not a Printer Expert.  I have advice that I hope will help you track down an improvement in your situation.  I have been known to be wrong.  What was left of my ego was left shredded on the cold tiles of an IT Server room decades ago the first time I crashed a network.    
    So.. you may have a flakey network because of stuff you cannot control.
    Yes, I hated the cable idea anyway.  Smiling.  BTW,  we purchased three routers before we found one strong enough to do the job and we moved it twice before we found a spot that it works best for all the devices.  Of course, although the house is small, the property is not and we have a number of devices that we drag about -- you may not need the coverage we needed.  Still, routers do matter.    Read, read, then decide if you have what you want.
    The "increasing the power" comes from the Dragon Document:
    Settings to Improve Wireless Connectivity
    See the section titled:
    Lost Wireless signal issues
    =================================================================
    Just thoughts:
    The rest of the setup and Troubleshooting are pretty cut and dried -- and some of it may help.  You will probably benefit from having someone work with you a bit on this, even someone who doesn't know a great deal more than you do -- there is knowledge in having more eyes on a problem.  Get a friend, sit down, read the suggestions, think about what you have tried, what sounds reasonable, what sounds like you can actually DO, and try those things first.
    I hope this helps, at least a bit.
    Perhaps an actual Printer Expert will step in and have some advice.  Smiling.
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • Does anyone else feel that Apple doesn't care about the issues we have been presenting to them? I have a lot of their products and I'm fed up with none of them working like they used to.

    I'm not going into detail but I've had it with my products being so crappy lately. From what I've read, Apple seems to not care as long as they are selling products. They have not acknowledged or owned up to the issues we are experiencing. I feel like maybe a boycott is in order.  I cannot be the only one that is this frustrated with my iPhone and iPad!

    The mail in rebate tells me that you sign a 2 year agreement. I have no idea why what they quoated to is different then what you got You could always do this:
    "HOW AND WHEN CAN I DISPUTE CHARGES?
    If you're a Postpay customer, you can dispute your bill within 180 days of receiving it, but unless otherwise provided by law or unless you're disputing charges because your wireless device was lost or stolen, you still have to pay all charges until the dispute is resolved. If you're a Prepaid customer, you can dispute a charge within 180 days of the date the disputed charge was incurred. YOU MAY CALL US TO DISPUTE CHARGES ON YOUR BILL OR ANY SERVICE(S) FOR WHICH YOU WERE BILLED, BUT IF YOU WISH TO PRESERVE YOUR RIGHT TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING SUCH DISPUTE, YOU MUST WRITE TO US AT THE CUSTOMER SERVICE ADDRESS ON YOUR BILL, OR SEND US A COMPLETED NOTICE OF DISPUTE FORM (AVAILABLE AT VERIZONWIRELESS.COM), WITHIN THE 180–DAY PERIOD MENTIONED ABOVE. IF YOU DO NOT NOTIFY US IN WRITING OF SUCH DISPUTE WITHIN THE 180-DAY PERIOD, YOU WILL HAVE WAIVED YOUR RIGHT TO DISPUTE THE BILL OR SUCH SERVICE(S) AND TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING ANY SUCH DISPUTE."
    Make sure to read the customer aggreement so you know everything before callign in.  This way you can know your rights. Customer Agreement | Verizon Wireless

  • Issue with JTextField Locking

    Hey All!
    I'm working on a database access project and have most things working pretty well, with one glaring exception.
    I've got a JInternalFrame form with 13 data fields to act as a front-end for a table in my database. Most of these data fields are JTextFields, some two are JRadioButtons, one is a JCheckbox and the last one is a JCombobox.
    To prevent accidental data editing, I lock the text fields down by setting JTextField.setEditable(false) and disable the other controls. I have the following method in my form:
    // Locks the form from allowing accidental edits.
        private void unlockForm( boolean unlock ) {
            this.isModifying = unlock;
            this.txtAniv.setEditable(unlock);
            this.txtApt.setEditable(unlock);
            this.txtBDate.setEditable(unlock);
            this.txtCity.setEditable(unlock);
            this.txtFName.setEditable(unlock);
            this.txtLName.setEditable(unlock);
            this.txtPhone.setEditable(unlock);
            this.txtStreet.setEditable(unlock);
            this.txtZip.setEditable(unlock);
            this.chkSearchable.setEnabled(unlock);
            this.optAM.setEnabled(unlock);
            this.optRA.setEnabled(unlock);
            // Set up the toolbar.
            this.setupToolbar();
        } // End of unlockForm() function.If I call this method from a toolbar button ActionPerformed() event and supply `true' as the parameter, it should set the editability of the text fields to true and also enable the other widgets. This seems to work pretty much as expected, except with my txtCity field, for some reason.
    When I click on my edit or add toolbar buttons, they call the unlockForm() method with the parameter set to `true'. However, when I attempt to change the data in the txtCity field, it acts as though it is still not editable. So, in an attempt to figure out what is going on here, I placed the following code in the FocusGained() event for the txtCity textbox:
            // DEBUGGING CODE:  Remove before release build!                      //
            // The following MessageBox is being displayed because I can not find //
            // the reason for the city field to not unlock and, yet, it will not  //
            // unlock for editing.  I need to figure this out!                    //
            MessageBox mb = new MessageBox();                                     //
            String msg = "The following are the settings of the city text field:";//
            msg += "\n-----------------------------------------------------\n";   //
            msg+ = "txtCity.getName() = "  +this.txtCity.getName();               //
            msg+ = "txtCity.getText() = "  +this.txtCity.getText();               //
            msg+ = "txtCity.isEditable() = "  +this.txtCity.isEditable();         //
            msg+ = "txtCity.isEnabled() = " + this.txtCity.isEnabled();           //
            mb.codeRequired(msg, this);                                           //
            ////////////////////////////////////////////////////////////////////////Now, when I click on the txtCity text field, I get this message box as expected, with one glaring problem. I get it more than once. Then, when I click on another control, I somehow go into an infinite loop of this message box being displayed and cannot get out of it. Here is my code for the FocusLost() event:
        private void txtCityFocusLost(java.awt.event.FocusEvent evt) {
            // Deselect the text.
            this.txtCity.select(0, 0);
            // Make sure that data was entered.
            if ( this.txtCity.getText() == null ||
                    this.txtCity.getText().length() == 0 ||
                    this.txtCity.getText().equals("") ) {
                this.txtCity.setBackground(errBG);
                this.txtCity.setForeground(errFG);
                this.txtCity.setFont(errFont);
                this.getToolkit().beep();
            } else {
                this.txtCity.setBackground(stdBG);
                this.txtCity.setFont(stdFont);
                this.txtCity.setForeground(stdFG);
                // Make sure the data was stored.
                this.entry.setCity(this.txtCity.getText());
        }Does anyone have any ideas as to what is going on? Maybe you could point me to a web site or book that actually has this problem and shows how to resolve it. I am at a complete loss as to what's happening, especially since I don't have any code in my FocusLost() event that points to my FocusGained() event. Any help that you can provide will be greatly appreciated.
    If it would help to see what the form looks like, you can view it here:
    http://pekinsoft.homelinux.org/CongregationManager.png
    Thank you for any and all help you may provide.
    Cheers,
    Sean C.
    PekinSOFT Systems
    Edited by: PekinSOFT.Systems on Oct 1, 2009 2:34 PM

    warnerja and camickr:
    I think you all hit it on the nose. My problem was that NetBeans would not go into debug mode due to some vague NullPointerException. However, I deleted my NetBeans user directory and, voila, I can debug again.
    So, when I debugged the code (without my crappy work-around attempt), I found that for some reason, when I click on or tab into the JTextField in question, it actually does go through the FocusGained event more than once, which I still cannot figure out, even going into the source for the Java APIs that get called. It's really weird and the strangest thing of all is that it is now, all of a sudden, working as expected. So, even though I have no clue what caused the issue to begin with, it seems to have cleared up.
    In reference to the post about the SSCCE, I tried to post one, but when I created it, it worked as expected and so was no help in showing my problem. However, when I created the SSCCE, I had already taken the action on my NetBeans user directory, so I'm thinking that something was broken there. Hazards of verifying plugins, I guess.
    Anyway, thank you all very much for your (unneeded, as it turns out) help to my (not actually a) Java problem. Next time I get some strange behavior like this, I think that I'll check my IDE first. ;-)
    Cheers,
    Sean C.
    PekinSOFT Systems

Maybe you are looking for