10.4.11 update and remote window sizing

Very odd problem has popped up this evening:
I upgraded a user's G5 iMac from 10.4.10 to 10.4.11, everything seems fine except for using remote control software such as ARD 3.2.1 and Timbuktu 8.7.
When I first attempted to log into the machine after the update using Timbuktu, the machine was responding extremely slow and I figured out why. The window was not sizing correctly. It was off by about 3 horizontal pixel lines. So whenever you moved the cursor, it had to redraw the screen over and over as it attempted to resize inside the window. I turned off fit to window and it did the same thing. Basically making the machine unusable in a remote setting. I updated to Timbuktu 8.7 from 8.6, but this did not fix the problem.
So I used the ARD machine to log in remotely. Oddly, I had the exact same problem. The response time was much better and I could do a little more, but still it was sluggish as it shifted the desktop back and forth as it attempted to redraw the screen any time I shifted the mouse up or down.
Has anyone else had any problems with using ARD and the 10.4.11 update? I am using ARD Admin 3.2 and client 3.2.1
Thanks,
G

I did try one thing: I logged off and back in as the "remote" user - the user account I had setup when I installed ARD on all the machines. When I do that, it works fine. Log back in as the main user, screen does the wacky scaling thing. Are there any particular prefs or files that control this that reside in the user's folder?

Similar Messages

Check Windows Update and Remote by Azure PowerShell

Hi everyone,
I've been dealing with a case in which my recent security update has broken the AD authentication. As a result, I can't remotely connect to the virtual machine by RDP. I'm wondering whether it's possible to check and remove Windows Update by Azure PowerShell
from my laptop.
Your suggestion would be greatly appreciated.
Regards,
-T.s
Thuan Soldier
A 23-year-old man loving Microsoft technologies and making crazy ideas on business journey.
SharePoint Vietnam |
Blog | Twitter

Hi Thuan;
This script is tested on these platforms by the author.:
Verified on the following platforms
Windows Server 2012
Yes
Windows Server 2008 R2
Yes
Windows Server 2008
Yes
Windows Server 2003
No
Windows 8
Yes
Windows 7
Yes
Windows Vista
Yes
Windows XP
No
Windows 2000
No
Regards
Prasant

Adobe automatic updates and Microsoft Windows.

About a month ago I asked a question in this article.
At the time I didn't consider what caused the problem as carefully as how to overcome the problem.
This time however I would like to consider what is causing the problem more than how to overcome it.
I have recently been informed by Adobe update manager that Adobe Flash Player v.10.0.42.34 was available.
Because I was busy working I accepted the update without thinking. Later I reconsidered and checked my Windows 7 computer.
I discover that I have exactly the same problem that I had a month ago after using the Adobe automatic update.
I find the Flash objects sometimes appear; sometimes appear and then disappear; and sometimes don't appear.
Out of curiosity I checked my Vista laptop, no problems there. I then downloaded the Adobe update and immediately I have the same problems with Flash.
I tried my old XP tower and things were OK on that machine. I downloaded the update there and the same thing occurs with Flash objects.
All computers are using Windows; all are using IE8; and all are up to date.
Why do my computers display Flash perfectly for a month, but immediately after an automatic update display problems?

Hi Blondie
Thanks for your time. Just back from overseeing daughter's Sky TV installation.
Appreciated the heads-up on Java 6.18. So after installation
Win 7 Programs & Features lists
Java DB 10.5.3.0
Java 6 Update 18
Java SE Developement Kit 6 Update 18
[Wow that's almost 300 Meg..??]
Add-Ons list
Java Plug-In 2 SSV Helper
isInstalled Class
Java Plug-In 1.6.0_18
Deployment Toolkit.
Curiosity here makes me ask, if you go to here to this website, it usually has 3 columns of Flash objects. But now after the latest Adobe update I only get 2 columns. The 3rd, righthand column is added underneath column 1..?? So I get all the information but sort of reassembled..?? I haven't noticed any other peculiarities yet but I will look at my websites more closely.
Regards
wired_retired

6.0.1 update lost default window sizing and all windows open full screen now, why and how do I get my original window sizes back?

After updating Firefox to version 6.0.1, all browser windows open in full screen size. I need new browser windows to open in their original default size since I use a website for work that opens multiple browser windows.
I used to be able to fix this problem by renaming my localstore.rdf file in my profile and then restarting Firefox but this does not seem to work in this last update.
This appears to be a recurring problem for Firefox and it's extremely frustrating.

Safe mode disables the installed '''Extensions''', themes ('''Appearance''') and '''Plugins''' in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. So it could be that an extension is causing it. You can try to isolate it starting with script blockers and similar extensions and '''Disable''' or '''Remove''' it.
Please also note that safe mode also disables hardware acceleration: '''Tools''' > '''Options''' > '''Advanced''' > '''General''': '''Use hardware acceleration when possible'''.
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

Windows Update and the Windows Error reports

31/08/2014 08:41
Windows Error Reporting
Fault bucket 124661653, type 21
Event Name:
WindowsUpdateFailure
Response: Not available
Cab Id: 0

Problem signature:
P1:
7.6.7600.320
P2:
80246002
P3: D67661EB-2423-451D-BF5D-13199E37DF28
P4:
Scan
P5: 101
P6: Unmanaged
P7: 
P8: 
P9: 
P10: 

Attached
files:

These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_7.6.7600.320_888a386ad31bd7d883fbf736bf547a8a1bd5bd9c_150a7995

Analysis
symbol: 
Rechecking for solution: 0
Report Id: 8809d3a9-30ea-11e4-8d08-5442495ff252
Report Status: 0
Does the reference to
D67661EB-2423-451D-BF5D-13199E37DF28
refer to Windows Update Agent and is a scan to find and down the updated version simply failing?
TIA, Gerry

Hi,
This structure is a general Windows Error report structure. There are different meanings for different types.
For the details, you could read this article:
WerReportSetParameter function
http://msdn.microsoft.com/en-us/library/windows/desktop/bb513626(v=vs.85).aspx
For your specific error, we could get these:
P1: 7.6.7600.320 means Windows agent version.
P2: 80246002 means the exact error code
P3: D67661EB-2423-451D-BF5D-13199E37DF28
should be the specific Windows Agent GUID.
Let's verify it:
Look for this GUID in your Windows Update log file located in C:\Windows\WindowsUpdate.log. There you could verify if it's a Windows agent.
Karen Hu
TechNet Community Support

Software Updates and Maintenance Windows

We are running SCCM 2012 R2 Primary Site Server.
We created the Collection for Windows Server 2012 R2 machine and Software Update group containing Software Updates for Server 2012 R2.
We set the maintenance windows on collection "11:00 AM- 2:00 PM"
We deployed the Deployment Package to collection at 11:00 AM, it downloaded the updates but didn't install any updates for 1 hour. At 2:00 PM it said that the No service window available to run updates .
Why didn't SCCM do anything for 1 hour?
Attached is the snippet from Update deployment.log
Evaluation initiated for (1) assignments.- 12:56 PM
Progress received for assignment ({D45DB820-AF28-4FAC-AAFC-7819937A412E})- 12:56 PM
Update (Site_64D995A8-C176-4B35-AFE0-724BB6793EBD/SUM_74b0949d-a84d-4599-8060-e7b982720886) added to the targeted list of deployment ({D45DB820-AF28-4FAC-AAFC-7819937A412E}) - 12:56 PM
Evaluation completed for the assignment {D45DB820-AF28-4FAC-AAFC-7819937A412E} - 12:56 PM
CUpdateAssignmentsManager received a SERVICEWINDOWEVENT END Event- 2:00 PM
No current service window available to run updates assignment with time required = 1 - 2:00 PM
Attempting to cancel any job started at non-business hours.- 2:00 PM

How to enable client randomization? Does it need to be enable for SCCM to deploy updates?
You can download the updatedeployment.log from below link
https://onedrive.live.com/redir?resid=F3743C55DC76B1EE!1099&authkey=!AL40dKaAzl-_trc&ithint=folder%2c.log

Cannot update iTunes in Windows 7 - download will not complete.

When my software updater alerts me that itunes needs to be updated and I try to download the latest version, I keep running into problems with the download. This happens regardless of internet connection speed, other programs running, etc. The download simply stops halfway through and eventually I get an error message saying the download wasn't completed. I've tried going through both iTunes ("check for updates) and my windows software updater. Suggestions??

perfect, thanks.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

Just updated iPhone 5 to ios7. Now when I plug in, iTunes does not download photos, and iPhone is not showing as a hard drive on my computer. Windows used to have a pop up to download photos, which is no longer there. iTunes is updated and iCloud isoff

I also recently installed Norton 360, but that was eliminated via Norton Help. They remoted in, removed Norton 360 and problem persisted - iPhone did not show on the "Computer" window, and no pop-up to download photos even with no antivirus installed. Norton help advised to uninstall and reinstall iTunes, which seemed a bit excessive. Any other fixes I can try before an uninstall and reinstall?

Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors

[Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Launching windows updates and virus scan updates

Has anyone written any applications that launched windows updates or virus scan updates using LabVIEW? I am kinda looking to write and application to maintain a system and manage all aspects of keeping the system healthy. Thanks for your help.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor

Hi forgive,
Thank you for your question.
CAU update is for window update instead of Exchange update, so CAU will not work for Exchange.
The following steps updated Exchange server 2013:
Preparing AD is the first step:
Insert Exchangfe Server 2013 CU image on DC server and use setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms command to prepare AD shcema
Then use Setup /PrepareAD /Organizationname:XXX /IAcceptExchangeServerLicenseTerms command to prepare AD
Upgrading Exchange Server 2013 mailbox role is the second step:
With the DAG, we firstly find PAM(Primary Active Manager) role using
Get-DataBaseAvailabilityGroup <DAG name> -status | Format-List PrimaryActiveManager
command;
Then we move all active database to PAM server and use Set-MailboxServer –DatabaseCopeAutoActivationPolicy:Blocked
to prevent database move to target mailbox node;
Now we could install CU on non-PAM mailbox node, we will restart Exchange server after installation was finished;
After restarting server, we use Set-MailboxServer -DatabaseCopyAutoActivationPolicy:Unrestricted command to unrestricted this node;
Then we move all database from PAM node to new version mailbox server node;
We followed step 2 to step 4 to upgrade another DAG node.
Upgrading Exchange server 2013 CAS role is third step:
This step is no additional explanations, insert Exchange Server 2013 CU image on CAS server, click
Setup.exe to upgrade, when it finished, we can see the result, and do not forget restart this server.
The last step is upgrading Exchange Server 2013 management console:
This step is no additional explanations, we insert Exchange Server 2013 CU image on remote console server, click Setup.exe to upgrade, when it finished, we do not forget restart this server
Notice: we suggest Window update is prior to Exchange update.
If there are any questions regarding this issue, please be free to let me know.
Best

Renew your license window keeps popping up. My subscription is updated and I can't use any application

Renew your license window keeps popping up. My subscription is updated and I can't use any application. Its is been 9 days since this happen and after hours of wasted time the only solution they give me is .. Create a new Adobe ID.

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Time Capsule Updating and Windows PC

I have a beutiful wifi network based on Time Capsule, iMac, MacBook Air and Windows Laptop.
Since yesterday I was able to connect to my Timecapsule HD areas by my Windows Laptop using the dedicated AirPort utility.
Yesterday I update the TC software with the last issue and....all my Mac's are able to access to the TC HD but Windows Laptop not.
I still able to be connected with internet but when I log in to my disk I received the message "Unknown user, incorrect password or login disabled".
The same disks, with the same user are fully available from the Mac's.
What happen?
Roberto

I see you have no responses to this so will offer my (limited) knowledge. I have a TC 500GB "newer" and have the following connected wirelessly: MacBook Pro (N), Dell 610 (G), 2 iPhone 3G units (G), Toshiba Laptop (G), Apple TV (N), 2 Airport Express units (N - serving as bridges to remote ethernet devices) and an older Intel iMac (G). I see no issues with throughput on the Windows or the Apple devices. I also have a "guest network" setup and active for visitors. Everything has been updated to current versions of firmware.
Can you provide any more details on the setup of the network and the Windows computer? I have seen corporate Windows computers be very sluggish when first connecting to home networks due to a bunch of admin stuff the company loads on. This admin stuff is trying to find network servers and do stuff like do security verification, update virus software, verify loaded programs, push out Windows and other updates. Some of this stuff takes a while before it gives up and eats up performance.
I don't know if the Windows is N or G or what mode the TC is running in. Frequently the G performance can be compromised by interference from other network routers or even you cordless phones. Have you tried moving the Windows computer around? Does the performance improve if it's in the same room as the TC? Details may help.

I did your Firefox 5.0 security update and got a virus that caaused my computer to go haywire and kept jumping from page to page as if someone had remote access to my computer.

I recently updated Firefox on my desktop to 4.0. About a week ago I got the pop up for the 5.0 security update. I went ahead and updated and within an hour my computer started switching screens and going back several pages. I closed the internet and ran my virus scan but nothing was found. I then opened my windows task and tried to look to see what other new updates or programs were installed but again the computer would not let me open the window and kept changing the screen and going back several pages. I ended up having to do a system restore to factory settings and it was still happening. I had to go in and disable the remote access option in order for my computer to function properly.

That is a legitimate Mozilla newsletter. As it says in the email:
You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ "

Windows 8.1 and Remote Desktop

I realize this question or problem has been asked a lot. I figured I would just ask the question too. I have a new HP Pavilion desktop computer running (original) Windows 8. Windows 8 came pre-installed with this computer. I have
a problem trying to remote into this Windows 8 computer from a Vista computer. Since I was never able to get RD to work under Windows 8, I thought I would update to Windows 8.1. Nothing changed. I STILL can't remote into this computer even
with 8.1 installed. The computer is listed under Network and has an IP address.
On this computer, I have a local account and a Windows Live account. Under the firewall, I have enabled any remote settings and checked the Private and Public. Nothing.
Yes, I have RD checked and I have remote assistance checked too. The funny thing is that I don't have any options to set the level of security. It is blank. There is nothing there.
What am I missing here? I want to be able to remote into this computer.

Hi，
For this issue,I may need a few more information to understand the issue better.
1.Did you get any error messages?
2.Can you connect to other PC with Remote Desktop Connection?
3.Did Windows vista ping Windows 8.1 successfully?
First,please refer to the following article to narrow down this issue:
Remote Desktop Connection: frequently asked questions
http://windows.microsoft.com/en-gb/windows/remote-desktop-connection-faq#1TC=windows-8
Then,please temporarily disable Windows firewall and security software to test this issue.
Also,please check the event viewer to see if some error log appeared when the issue occurred.
Regards,
Kelvin hsu
TechNet Community Support

Installed latest itunes update and computer tried to burn a playlist to CD and realized computer no longer recognizes my CD/DVD drive. This is an APPLE Itunes issue. Help!. HPPavillion DV6 64 bit, windows 7

Installed latest itunes update and computer tried to burn a playlist to CD and realized computer no longer recognizes my CD/DVD drive. After doing some data mining, found out from community this is an long standing APPLE problem- which doesn't get much tech support in terms of fixes. I have an HPPavillion DV6 64 bit, Windows 7 OS . After reading an earlier complaint from 2009 in the support community, I ran diagnostics from ITunes which gave the following result. Can someone please help? (I'm not enough of a techie to know what I'm doing or how to locate /reinstall CD drivers. I am searching for driver disc but cannot locate.)
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.6.3.25
QuickTime 7.7.2
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
VoiceOver Kit 1.4.2 (222093/222742)
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0043AC7C0368E428
Current user is not an administrator.
The current local date and time is 2012-07-24 23:43:08.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., AMD M880G with ATI Mobility Radeon HD 4250
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.

Doublechecking ... did you have CD/DVD drive tests checked when you ran those diagnostics? (I'm not seeing the CD/DVD test results down the bottom of the results where I'd expect to see them.)
For example, here's what I get:
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Acer Aspire X3400
iTunes 10.6.3.25
QuickTime 7.7.2
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003CAD7C0A1258F8
Current user is not an administrator.
The current local date and time is 2012-07-26 10:42:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is disabled.
HDCP is supported.
Core Media is not supported. (16008)
Video Display Information
ATI Technologies Inc., AMD Radeon HD 6570
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: d6a87ba725121aa1240b1ce936c23470
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: ATAPI DVD A DH16ABSH, Rev YA12
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 255:57 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The drive CDR speeds are: 4.
The drive CDRW speeds are: 4.

10.4.11 update and remote window sizing

Similar Messages

Maybe you are looking for