10.4.6 update problems = Exchange - time of mail delivery is wrong

10.4.6 update
Entourage 11.2.3
Exchange 2003 mail server
date/time server my Mac is using: internal company time server
When I send an e-mail, the users with MS office 2003 (on a PC) have a time received of 1 hour later. If I send it a 9am, they get it ASAP, but it is marked a 10am.
MS office 2000 (on a PC) has the correct time.
Any insights?

This is the iPod nano forum.
Don't you need to post this in the Tiger Forum?

Similar Messages

  • Reservation not updating at the time of over delivery

    Hello Experts,
    At our client place over delivery is activated in production orders.
    At the time of confirmation , system is allowing for doing the GR of over delivered  material.
    But at the time of GI, system is not calculating the raw material for over delivered material.
    For example:
    We have the order for 10 FG, we have 50% over delivery.
    we are doing the GR of 15 FG , but at the time of MIGO/MB26 system is calculating the ROH for 10 FGs only.
    Kindly guide how to correct the process.
    Regards
    Naveen

    Dear ,
    If you are delivering 15FG  where as 10 FG is your ordering Qty then you must be consuming extra components and operation hrs  physically as well in SAP system you need to update the same against the production order .
    ,did you add that extra Component in Production Order -Component Over view or did you add that extra man hours directly in Operation hrs in Operation Overview screen in CO02 ??
    Even you have over delivery of 50% , you should have upadted component , hit the cost calcualtor  and assing them to respective ooeraiton in CO02 and capture the same in Production Order reservation number ( Check in MD4C or MB25 wether your extra materials are under same reservation or not )  so that Store can issue the extra material for over delivery in MIGO-261 and CO11N -extra man hrs can be posted .Once  you did this , check in Production Order -CO02-Extras-Cost-Costing trend
    You will find the planned and actual cost with variance .Check in CO02-Goto-Documents Goods Movement -It will refelt the cost of materil (261/101)
    Hope it is clear .
    Regards
    JH

  • IBD Updation at the time of return Delivery

    Hello
    We are using PO and IBD process
    But after return delivery to the vendors the IBD is not getting updated, becasue of which we have to create the fresh PO insted of makeing use of old open PO.
    how this can be corrected
    Regards
    Niti Narayan

    Hello,
    While receiving of material through MIGO transaction then system will Shown "excise Invoice" tab in MIGO tcode. But While Return delivery of material, then system will  not shown Excise invoice in MIGO, because  the Return delivery is nothing but issue of material to vendor or outside the gate, So in this case we can use transaction code J1IS.
    Regards
    Mahesh Naik

  • Having problem in app store cos id is wrong

    Hi there,
    I've recently registered my sister's account in app store but the problem is the e-mail id is wrong so I can't get the verification code. Please advise me that what can I do further?

    Thanks for your reply but I solved the problem myself. I wrote the wrong id and then edited into correct one after that I got the verification e-mail and I can use it now.
    How you can?
      https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ Use that URL and then I clicked on Manage Accoount so you can put the wrong Id on it and in the next step you are able to edit the correct e-mail id and get your verification e-mail.

  • I am using Windows 7 Home Premium 64-bit OS.  I've never had this problem before... today I opened iTunes and it prompted me to download the newest version.  I use iTunes all the time and have updated it multiple times with no issues.  During the installa

    I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version.  I use iTunes all the time and have updated it multiple times with no issues.  During the installation process it gave me an error message that said: 
    Runtime error! 
    Program C:\Program Files\iTunes.exe
    R0634
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    I quit the installation, uninstalled iTunes and rebooted my computer.  I now receive a similar message with a slight difference:
    Runtime error! 
    Program C:\Program Files (x86)...
    R0634
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    I did not leave anything out from the error message.  It doesn't point to a specific file, it just ends with "(x86)..."  Every time I boot up my computer, this error message pops up on my desktop.
    How do I repair this issue?  I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse.  I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs.  Any suggestions will be greatly appreciated!!

    Hi lustyln,
    I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
    For reference, here are your product specifications:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
    To get your PC software back to how it was when it was first purchased, run a system recovery:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
    I hope this helps.
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

  • I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for furth

    I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for further assistance. It doesn't take me to customer support, but does take me to a screen which states. "Error "This serial number is not for a qualifying product." I've checked my account and the product serial number is associated with my account., so I don't see any problem.  I have not been able to find a resolution to this problem, so I hope that someone can point me in the right direction.  Thank you!

    update directly, Product updates

  • I have iWorks for a Mac Mini, I want to install that software on my MackBook Air, but it keeps telling me to update the software, I have updated it several times. Still no go, any ideas how to get past this problem? Thanks!

    I have iWorks for a Mac Mini, I want to install that software on my MackBook Air, but it keeps telling me to update the software, I have updated it several times. Still no go, any ideas how to get past this problem? Thanks!

    Movies are not bought via Netflix, then are rented or borrowed.
    For iTunes account issues, contact iTunes Customer Support.

  • Was there a problem with the last update? Every time I try to watch a video on the net it goes back to the home screen

    Was there a problem with the last update? Every time I try to watch videos it goes back to the home screen

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Alarm & Automatic time update problem ?

    I was wondering if anyone is experiencing a similar problem - I've just discovered this and it's too late to call Club Nokia
    I am on Orange in the UK, and we are currently in British Summer Time. I have set my alarm to go off at a particular time and afterwards the time seems to automatically revert back to GMT. Is this a known problem on the Nokia N70 ?
    I have also tried deliberately changing the time on my phone to a couple of hours off, and then switching the automatic time updating system on, and it hasn't changed the time on the phone - this leads me to suspect that Orange doesn't implement this feature (as it doesn't implement the cell info display feature) but if so then this points to the alarm feature being a bug in Nokia's firmware ?
    Anyone experienced this or has any enlightening information ?
    Thanks in advance
    Regards
    Edward
    Regards,
    Edward

    27-Apr-2006
    04:43 AM
    steve_p wrote:
    Hi Edward,
    You are correct about the cell info display. Orange don't use it. Sometimes you will see it if roaming abroad on other networks.
    I've also briefly suffered exactly what you have described about time reverting to GMT from BST. I put it down to a broacast cell being incorrectly configured.
    About a month ago I was working abroad in Republic of Ireland and the clocks had just moved forwards. The hotel I was staying at (in fact I could narrow it down to the room I was in) was in a zone where my phone repeatedly reverted to GMT. However, as soon as I had travelled to my work site, the phone was 100% back on correct BST. Travelled back in the evening and the phone invariably stayed at the correct time but come the next morning it had reverted back to GMT at some point overnight. My phone has only ever exhibited this behaviour for those few days at that one hotel otherwise it's been perfect. I have my phone on auto time update all the time.
    Strange eh? I put it down to a local issue of the cell that happened to cover the hotel. Perhaps your home cell location suffers the same issue? Only thing I can think of.
    S.
    Hmm - it does sound like a network type problem in that case although if so that means the cell where I live has never been configured correctly because I always get this problem - but only when setting the alarm (it never happened on the old Nokia 6230 I have). I reported it to Orange yesterday, and they quote a 24hour response time from their techie guys so I am hoping for some information back today.
    Any ideas why it might be happening with an alarm clock ? When I deliberately misconfigured my phone's time and set auto time update on, it never corrected the time so why correct it when the clock goes off ?
    Thanks for your help and the info
    Regards
    Edward
    Regards,
    Edward

  • Security Update for exchange 2013 SP1 (KB3040856) failed mid-way / power problem mailbox server disconnected

    While applying todays security update for exchange 2013 (KB3040856) there was a power issue (sad story) and the update was interrupted halfway through.  A bunch of service were left deactivated and I beleive I brought them back.
    At this point the exchange admin center brings me to the login and when I do login, I get an enable to display page msg after the login.
    I have an ActiveSync error log  "cannot access the mailbox because the mail box server is disconnected"  translated from french.
    I also have ASP.NET 4.0 error "MapiExceptionMdbOffline"
    What could be the next step in fixing this if it is at all possible ?  I am not an expert in cmdlet but can manage if pointed in the right direction.
    Any help would be greatly appreciated.
    Thank you.

    I ran update KB3040856, and it disabled all Exchange services, and a few others besides (IIS and filtering). I ran the test-servicehealth cmdlet and eventually got all the services set to automatic and all running.
    This is really a stupid thing for an update to do, what is going on? Exchange 2013 is trouble enough already, we really do not need this sort of agro.

  • Payment budget is getting updated at the time of Invoice

    Hi,
    I have a peculiar problem in Funds Management. As per the client requirement payment has to made in split i.e. 90% and 10% against the invoice amount raised. But, payment budget is getting updated at the time of invoice itself when i use the profile of 00350.
    It is observed that at the time of payment, the payment budget is not getting updated and updating at the time of invoice creation itself. So, when we developed customised report, we had given payment budget filed to know the current month expenditure. But the problem is as per cleint requiremnt, the payment budget has to update at the time of payment but not at the time of invoice creation.
    Please advice me is there any way to solve this problem.
    Thanks & Regards
    Vijaybhaskar

    This is standard; payment budget is updated during the invoice issue. What is done with the payments is 'payment transfer'; it could be either manual (via FMF0) or automatic - depending on your settings in FM. In your reprots you can define to see only 'cleared' invoices in FM, i.e. those, for which the payment transfer has been completed. However, the availability control will be still performed already on invoice phase.
    Hi,
    As suggested by you i have done automatci payment ransfer in OF29 and made value type 54 as stastical and 57 value type for payments.
    As you suggested "In your reprots you can define to see only 'cleared' invoices in FM, i.e. those, for which the payment transfer has been completed.".
    Please expalin where can i look clered invoices in FM, .e. those, for which the payment transfer has been completed."
    Regards,
    vijay

  • Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

    Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
    ''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
    BuildID: 20100914125854
    CrashTime: 1290192405
    EMCheckCompatibility: true
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536
    InstallTime: 1287124738
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 422
    StartupTime: 1290192405
    Theme: classic/1.0
    Throttleable: 1
    Vendor: Mozilla
    Version: 3.6.10
    This report also contains technical information about the state of the application when it crashed.''
    Same thing happens when i click restart.
    No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

    Did the crash reporter send any crash reports?<br />
    You can see the crash reports in this folder:
    "C:\Users\&lt;user&gt;\AppData\Roaming\Mozilla\Firefox\Crash Reports"
    See: http://kb.mozillazine.org/Breakpad
    See also [[Firefox crashes when you open it]]
    Create a new profile as a test to check if your current profile is causing the problems.<br /><br />
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]<br /><br />
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"<br /><br />
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br /><br />
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox<br /><br />
    If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data when uninstalling.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    See:
    * http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Problems accessing Time Capsule on windows Vista

    I have an iMac running Leopard and a laptop running Vista Home Edition. I'm having some problems accessing Time Capsule from the Vista machine. everytime I click to access the drive, a message appears in the menu bar of the window that says (not responding). I've tried leaving it. I've even changed my entire wireless network to bypass the original g router (belkin) to use TC, so I now have TC as my router, Belkin just setup as a wired broadband modem but I still get the same problem. The mac seems fine, although I have had quite a few issues with drop outs.
    both machines have the latest version of Airport Utility and Bonjour.
    The laptop is a recent purchase to replace a dead XP machine, this worked fine and I managed to get stuff backed up just before it died, thankgod.
    Any help appreciated.

    No problem seeing Time Capsule with iMac, Dell desktop XP Home, Dell notebook XP Pro, and Fusion with XP Pro. All installed according to the installation guide. Installed AirPort Utility on all machines and updated firmware to 7.3.1. To see the other machines, make sure file sharing is on. Firewall on the PCs may need to be turned off. The printer plugged into the USB port also worked with all the XP systems and the iMac with a few missing features on iMac (I am assuming different driver issues). BTW, logging onto the created network and accessing the Time Capsule HD are separate. If you've entered different passwords for the HD and wireless networking when setting up Time Capsule initially (which I did through the iMac first), you'll need to enter them separately with the XP machines. You could also try resetting Time Capsule. Seems to work for others.

  • Why do I get iMessage failed update date and time in settings

    My iphone5 keeps changing it time zone on it's own and I keep getting a notification in messages saying iMessage failed update your date and time in settings.  I have update it several times and it's keep doing it.  Now it's just frustrating.  How can I take care of this problem for good. 

    I have also been getting the message ever since I got my iPhone 5 on September 12.  I have to reboot the phone to fix the problem or turn the "Set Automatically" off and then back on. This is a glitch likely with Apple's iOS software, but my Verizon store said that have received numerous complaints on this issue, but no patch has been released for it as of yet.

  • Nokia N97mini Firmware update problems

    As I understood there are more than one firware update version:
    Version 12.0.110 v4.0 and version 12.0.110 v4.01
    How is possible to make the update, if phone autoamatically downloads from network provider wrong version?
    Nokia 1611, 2210, 3110, 5110, 6210, 6310, 6310i (up to these models totally satisfied)
    Then don't remember model, then E50 (mostly happy), then N97 mini - phone with briliant keyboard, but poor touchscreen, then business phone E07, phone that can not make a photo of contract, invoice or business card. poor design of usb port and 5 months at service did it - my nowadays phone is Apple. Company gave me Asha 300, so frustrating, that I use my old E50 instead...

    Right, im back again
    Ive been sat here thinking about how the phone works, long story short ive managed to fix the problem by trial and error, i still feel the phone is drawing too much power for some functions to work properley so ive deactivated my keypad tones and BOOM! no more reseting, ive also changed the profile i use as it seemed that the general sound profile caused the resetting, so if your haveing the same problems, as soon as you can press your Power button do so, then change to the silent profile so you can customise a 2nd profile that has the custom settings you desire.
    IF this works for you and you had the same issue with the 06.10 software on the nokia 6280 on the 3 network, please let me know, lol.
    Thanks again for your time, ill keep this thread up to date if any more issues crop up.

Maybe you are looking for