100% Complete Schema Duplication

100% Complete Schema Duplication
10gR2
Need to duplicate a schema 100%, including Pkg, Types, all objects generated
by XDB etc.
Does expdp/impdp do that ?
(or what does expdp/impdp skip, if any ?)
thanks

Schema level export should do it. It gets all of them owned by that user/schema.
Thanks
chandra

Similar Messages

Aperture wont open and says "repairing library database" even when 100% complete it still wont open

my aperture won't open and says "repairing library database" even when it gets up to 100% complete it just suts there frozen and won't open to the aperture screen

How many Images? How much storage space does the Library occupy? Do you have plenty of free space on your system drive?
Ignore the progress bar — it's often stuck, and therefore unreliable.
Ignore Activity Monitor reporting Aperture "Not Responding". This is, imho, a bug Apple should have squashed years ago.
Repairing (or doing any operations an entire Library) a large Library can take hours or days. You did not report what you did to get past 79% — I'm going to guess you Force-quit Aperture. Force-quitting any database is always a bad idea and should only be done as a last resort. Each time you force quit, you are likely adding to your problem.
Restart the rebuild, and let it run, unmolested, for at least 40 hours. IME, at some point the progress bar with jump to 99%, then 100%, and then stay there for perhaps a few more hours, and then it finishes.
I have _never_ had a repair or a rebuild (I have not had to do many rebuilds) _not_ finish. One took about 82 hours, but it finished.
If your Library is small — say, fewer than 100,000 Images _and_ smaller than 100 GB — and you're seeing these very long rebuild times, you likely have an actual problem — but the only way I know to find out is to let the rebuild continue. (I don't store any but small video in Aperture, and very few of them, so my numbers may not correspond to Libraries that store videos.)
Did you notice any other problems before Aperture itself recommended rebuilding?
In short: let it run unmolested.

Officejet Pro 8600 Plus will not print but is connected and says that the print job is 100% Complete

Hi All,
I'm printing from a MacBook Pro using OSX Lion. It says that Officejet Pro 8600 Plus is connected and that the print jop is
100% complete except that nothing comes out of the printer. I've done all of the test prints and they've printed just fine.
I tired all of the troubleshooting steps listed on the support guide and still nothing. HELP!

Not a reply but another plea for help.
There seem to be so many people with wireless problems that a) it seems silly to start a new thread and b) which one to enter my own plea.
-Printer bought about 2~3 weeks into Sept 2012
-Installed onto Macbook Pro running Lion (full updated at that time)
-Both wireless scanning from printer to computer and initiated from computer worked fine.
-Printer, with full choice of duplex, layout etc, worked fine. (Even left 5star feedback somewhere!)
-Set up eprint. That OK, too. Fine from iPad2 and SE Arc S printing photos.
-Somewhere along the line it stopped communicating with my MBP
-Out of interest, since there seemed to be no problems with an Acer laptop running Vista, I booted the MBP from an external drive on which I'd done a backup of my 10.6 system iMac (>300Km away: can't try that). Installed HP software from disc. Seemed fully functional. Odd. Very odd.
-Restarting with Lion on MBP, tried again. Looks as if it might work, but loses connectivity. Tried manual address on printer.
-Booting from 10.6 system again, reinstalled Lion on MBP (wondering if conflict between HP and Apple updates)
-Reinstalled HP software from disc.
Still didn't work.
-Brought Lion up to date. Downloaded most recent dmg file from HP. Looked for updates. Have applied firmware update to printer
8600 doesn't list my MBP as available computer to scan to
[But all the test pages done whilst in HP Utility, and others, get sent through]
Am getting rather fed-up with all this; never, ever before have I had so much printer problem.
There seem to be a number of Lion users out there with the same problem. So far -but very infrequently tried- other machines/systems seem OK, therefore I am coming to the conclusion that it is an Apple<> HP conflict. If not sorted soon the printer will be returned as it is not fit for purpose. I'll revert to using my seldom problematic, non duplex A3 Brother.
Hrumph
Please help, someone! Either with a pointer to something I've not yet tried or by analysis and rapid availablity of updated software.
Thanks,
Mike W

Cpt 3 - quiz summary page falsely triggers 100% completion

I'm experiencing a problem - I've noticed the quiz summary page falsey triggers to the LMS that 100% of the slides are complete when they aren't.
I'm using Captivate 3 and Sum Total. I have a standalone quiz that is part of a curriculum where the current quiz is a pre-requisite for the next course - in other words, pass the quiz and continue, fail the quiz and you have to keep trying until you pass.
After a bajillion different combinations, I have found what almost works. The course is set to "Complete/Incomplete" when a user views 100% of slides. The last slide is the "way to go" slide and is only reached when the learner passes. A failing grade goes back to the beginning and doesn't reach the last slide. The intent, according to our LMS admin people, is that a failing grade never completes the course/quiz.
If I exit part way through, it shows as "incomplete" in the LMS - that is what I want. When you fail, you go back to the beginning - again, what I want. When you pass and you go to the last page, it shows as "complete", which is what I want.
Here is the problem. When you fail and you find yourself at the quiz summary page, saying, "sorry, you failed", a learner will do one of two things - quit right then and there or click on the button to try again. If the learner quits right on the quiz summary page they get a "complete" message. In other words, regardless of the Quiz Reporting settings, Captivate 3 reports to the LMS that all slides are compete at the quiz summary page. You can add 15 blank slides afterwards and that doesn't matter. I've even put the "way to go" slide near the beginning with the quiz skipping it until it is branched back after a pass - but that doesn't work. For some reason, this one quiz summary page sends a message to the LMS that all slides are 100% complete. I've even removed the slide and put my own in its place but even the competion of the quiz triggers that all the slides are 100% complete.
I'm at a loss. My deadline was yesterday and I need help!!!

Hi Michael,
Are you using SCORM 1.2 or 2004 ? Try both and let me know if you see the same result.
There were some issues with reporting in Cp3 and were fixed with Cp4, so could you try your project on Cp4 or Cp5.
Thanks,
Deepak

Migration is in progress and thus upgrade can be done as soon as migration is 100% complete.

When I click on the "Upgrade Options" button on one of my C670s I get this message:
Migration is in progress and thus upgrade can be done as soon as migration is 100% complete.
Any thoughts?

Usually the only thing we see w/ migration message and % is during PVO setup and migration to SMA. If that is the case... there could be stale or incomplete messages that did not migration or get accounted for. Suggestion would be to disable CPQ from the ESA side, commit changes, and then re-review and enable the CPQ/PVO to see what occurs. This should clear out after that has checked itself.
-Robert

Pleaswait while the downloaded files are being extracted-100% completed

With the trial dnload
of PS5 ext the message
"Please wait while the downloaded files are being extracted…100% completed"
was as far as things went. My Downloads File
shows no CS5 activity. Please help.

I'm (let's say over 50) and have worked with PCs for 30 years, and bigger computers for some years before that. No hassles here. But I'm a computer engineer.
It's kind of like that scene with the satellite phone in Jurassic Park II when they first get to the island... "You've gotta love it for it to work." "I'll love it when it works."
-Noel

Iphoto library inconsistencies says it is 100% complete but it still shows it is running and the message won't clear

Iphoto library gave message it had inconsistencies. I clicked the button to complete the changes and it shows & says it is 100% complete. The message won't clear and it is still running the app but it is completely frozen and won't let me do anything.
Help please

http://support.apple.com/kb/HT2638
if all else fails try http://www.fatcatsoftware.com/iplm/

Task Updates By Team Members In Project Server 2013 but not reflects in MSP 100% completed

Hi,
My problem is related to Project Server & Project Professional 2013
My scenario is like that Project Manager publish the project plan, and respective team member get their task. And Team Member is updated the task,then send to the Project Manager for approval. Project Manager is approved the task. But, while opening my
project in MSP 2013, it is not synced means, in msp it is not showing task 100% completed.
Please solve this problem, I am waiting for your response.
Thanks
Saikat
Consultant

Hi Guillaume,
I have tried your procedure, but not get any solution.
Yes, two errors are showing while opening in MSP like:
1) The following job type failed to complete, Job Type -Load. Could not load project. Please try after sometime.
<detail><ServerExecutionFault xmlns="http://Microsoft.Office.Project.Interfaces/" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"><Actor i:nil="true"/><LastError>1032</LastError><Message/><Source/><StackTrace/><TargetSite
i:nil="true"/><ExceptionDetails><errinfo xmlns=""><general><class name="ProjectHasWriteLock"><error id="1030" name="ProjectHasWriteLock" uid="c9095c9e-cfbc-e411-940a-000c299e9fb7"/></class><class
name="ProjectHasNoReadLock"><error id="1032" name="ProjectHasNoReadLock" uid="ca095c9e-cfbc-e411-940a-000c299e9fb7"/></class></general></errinfo></ExceptionDetails></ServerExecutionFault></detail>
2) Second error are showing in Queue like "Skipped for Optimization" and "Failed But Not Blocking Corelation"
Please give me the ultimate solution to solve this.
Thanks and Regards
Saikat
Consultant.

Repairing Library Database stuck at 100% complete

My Library repair has been stalled for almost 24 hours at the "100% complete" stage for over 24 hours.
In Activity Monitor, however, Aperture is cruising along, bouncing between 350% to 550% CPU%. Library is Aperture 3.2.4, and I'm running Snow Leopard 10.6.8.
My Library is fairly large (2.98 TB on a 4 TB internal HDD), and I'm reluctant to force quit given the amount of time spent on repairing (about 36 hours total). Any ideas would be greatly appreciated.
Gordon

Great!
So for our statistics:
"My Library is fairly large (2.98 TB on a 4 TB internal HDD)"
will need three days - 1 TB per day - congratulations for your patience!

100% complete, stuck @ Processing:merging distributed MPEG segments

I have a 3 machine (proper) cluster and have a 14 hr job stuck in this "100% completer' condition. It's been like that for over 8 hours now.
All machines are up and running and connected to the network. One machine showing a green blob in QCluster icon and QAdministrator shows it's cpatured and processing - I assume it's the one merging segments.
Is there any way to diagnose or recover my job?
I'd hate to have to re-submit a 14hr compressor render :-/

Going to reply to myself and mark this is answered in case anyone else has similar problem.
For whatever reason, QMaster decided not to merge my 4 video segments back together - it was working on it then suddenly stopped for no reason I could find.
I found the job (by date) in /private/var/spool/qmaster/string of digits/shared/ had all of the four complete video segments marked m2v-1 , m2v-2 etc. so I used ffmpegX Tools to Join them together and seems like I have a complete MPEG2 file.

This is 100% completely..

This is 100% completely confusing and irritating.. I can't figure nothing out.... Sigh... Good thing it's just the trial cause it'd be a complete waste of money to buy this stupid program..
This Photoshop sucks.. I can't do what I wanna do.

1 - moved to the Photoshop forum
2 - venting is fine, but if you have a question click reply and add your question below

Ms Project 2013 report for resource name, tasks less than 100% complete within a date range I can set each time

I have seen I can create a report for a resource name with a specified date range, and one that can show me for a resource name any incomplete tasks, but I want to do the following and cant work out how to state it in the report constructor:
resource name equals - {I want to set a given resource in here}
% complete is less than 100%
start - date range is between [today -7 days] and [today +7 days]
Please can someone show me how this is possible, I know it will be and it is me that has been defeated!!

workspacedesign,
Oops, my bad. I missed the point that the Name field for assignment rows will be the task name and that's not what you want. There is also a glitch in the date range filter. So, here's how to fix that.
First, in the Resource Usage view, copy the Name field to Text1. Now select the resource line and do a fill down for all assignments under that resource. Do that for each resource. This could be automated with VBA, but for now, a manual setup should work
fine.
Second, instead of testing for the Name field in the filter, test for the Text1 field.
Third, change the Finish test to be "less than or equal to".
Now when you apply that filter, enter beginning date of your range and then the ending date of your range followed by the resource name. You should get the data you want.
Unfortunately formulas in custom fields are not as flexible in Project as they are in Excel. For example, in Project a formula can only operate on data for that row. Further, even if you use the formula Today() +7 for your filter criteria, the first time
the filter is used, Project will hard code today's date into the filter. The normal way around both of these shortcomings is to use VBA.
Hope this helps.
John

I am unable to get 10.1 adobe reader to operate,100%complete,I am useing windows Vista, on my dell

I can't get my adobe reader 10.1 operate,100%download complete,I am useing windows vista ,on dell lab top e-1505.

Hi,
Do you mean Adobe Flash Player or Adobe Reader, cause there is no such product as Adobe Flash Reader. Could you please recheck the same.
In case its Adobe Reader 10.1 that you want to install, try the following link:
ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.0/en_US/AdbeRdr1010_en_US.msi
Thanks
Ankit

ITunes 100% completely broken

So, I get home from class today and turn on iTunes (v.7.1.1). the program stays open for about 30 seconds and then quits unexpectedly. It asks me to reopen or send a report. I reopen. Nothing happens. It asks me to try again or send a report. I tell it to try again. Nothing happens. It asks me to reopen or send a report. I send a report.
I try to open iTunes again and get the exact same result. It stays open for 30 seconds and quite for no good reason. I restart my computer. Same deal when I open iTunes after restarting. I delete iTunes, and redownload it from apple.com. Same thing happens. I delete it again, redownload it and restart my computer. Same thing happens. I use Appzapper to completely get rid of all iTunes related files, everything. I completely reinstall iTunes after redownloading it AGAIN from apple.com. SAME. THING. HAPPENS. Only now, since I deleted all the iTunes files all my settings are gone. So during my 30 second window, I redo all my settings. I quit iTunes myself before it quits automatically. I reopen iTunes. SAME **** THING HAPPENS YET AGAIN.
So I have no freaking clue what is going on, or what could have caused this, as I never messed with anything, I didn't add any new files to the library or anything like that. I just opened it, like I had down just yesterday, and now the problem doesn't seem to want to go away.
Anyone? Anyone got any ideas on this on?

Have you tried 'Repairing Permissions', it is an option in Disc Utility.
It might help with a damaged application.
Ian

Data Pump export complete schema

Hi ,
can anyone please help me
when i am trying the export the database schema with datapump api
i have created directory before executing this block
i am getting following errors
ora-31634 job already exists
ora 06512 sys.DBMS_SYS_ERROR
ora 06512 sys.DBMS_DATAPUMP line 72
ora 06512 sys.DBMS_DATAPUMP
Declare
P_handle number;
P_last_job_state varchar2(45);
P_job_state varchar2(45);
P_status ku$_Status ;
BEGIN
P_handle:=DBMS_DATAPUMP.OPEN ('EXPORT','SCHEMA', NULL,'EXAMPLE','LATEST');
DBMS_DATAPUMP.ADD_FILE (p_handle,'example.dmp','DMP_DIR');
DBMS_DATAPUMP.METADATA_FILTER (p_handle,'schema_name','IN (''username'')');
DBMS_DATAPUMP.start_job (p_handle);
end;
in this it is saying job already exists ,is it means that export job is already running?
Thanks in Advance

Hi Srini,
Thank you very much for your help. Unfortunately after having followed the instructions of the DOC I am still getting the same errors ?
none the less thank you for your input.
I was also wondering if someone could tell me how to move this thread to the Database Security area of the forum, as I feel I may have posted the thread in the wrong place as it appears to be a Database Vault issue and not an imp/exp problem. ?
Edited by: zooid on May 20, 2012 10:33 PM
Edited by: zooid on May 20, 2012 10:36 PM

100% Complete Schema Duplication

Similar Messages

Maybe you are looking for