Cpt 3 - quiz summary page falsely triggers 100% completion

I'm experiencing a problem - I've noticed the quiz summary page falsey triggers to the LMS that 100% of the slides are complete when they aren't.
I'm using Captivate 3 and Sum Total. I have a standalone quiz that is part of a curriculum where the current quiz is a pre-requisite for the next course - in other words, pass the quiz and continue, fail the quiz and you have to keep trying until you pass.
After a bajillion different combinations, I have found what almost works. The course is set to "Complete/Incomplete" when a user views 100% of slides. The last slide is the "way to go" slide and is only reached when the learner passes. A failing grade goes back to the beginning and doesn't reach the last slide. The intent, according to our LMS admin people, is that a failing grade never completes the course/quiz.
If I exit part way through, it shows as "incomplete" in the LMS - that is what I want. When you fail, you go back to the beginning - again, what I want. When you pass and you go to the last page, it shows as "complete", which is what I want.
Here is the problem. When you fail and you find yourself at the quiz summary page, saying, "sorry, you failed", a learner will do one of two things - quit right then and there or click on the button to try again. If the learner quits right on the quiz summary page they get a "complete" message. In other words, regardless of the Quiz Reporting settings, Captivate 3 reports to the LMS that all slides are compete at the quiz summary page. You can add 15 blank slides afterwards and that doesn't matter. I've even put the "way to go" slide near the beginning with the quiz skipping it until it is branched back after a pass - but that doesn't work. For some reason, this one quiz summary page sends a message to the LMS that all slides are 100% complete. I've even removed the slide and put my own in its place but even the competion of the quiz triggers that all the slides are 100% complete.
I'm at a loss. My deadline was yesterday and I need help!!!

Hi Michael,
Are you using SCORM 1.2 or 2004 ? Try both and let me know if you see the same result.
There were some issues with reporting in Cp3 and were fixed with Cp4, so could you try your project on Cp4 or Cp5.
Thanks,
Deepak

Similar Messages

Quiz slides not to be counted in quiz summary at end - Captivate 4

I have created a course which has quiz slides at the beginning of the cours which I have marked to not be graded. These slides are knowledge checks and should not be graded nor be counted. Then I have quiz slides at the end of the course that I do want to be graded. But I do not want the quiz slides at the beginning of the course "counted" in the summary quiz slide at the end of the course. I only want the quiz slides at the end counted.
How can I change the settings in the quiz slides to "not" be counted in the quiz summary page at the end of the course.
Thank you for your assistance.

My best guess here as to the reason for your issue is that you've removed some of the essential objects from the Quiz Slides and that is fouling things up.
Quiz Slides MUST ALWAYS have the default Question Title and Question Text captions present. These are special caption objects that are ONLY found on quiz question slides. If you remove them or replace them with normal captions your quiz slides will malfunction inconsistently.
The other thing you may have done here by the sound of it is to set Submit All and then move the Submit All button off the slide into the scrap area. That's also likely to screw things up. If you do NOT want the user to see the Submit All button until the final quiz question slide then just change them to Transparent buttons and move them ALMOST off stage, but leave at least a few pixels of the button object still sitting over the top of the stage area. This will mean the user cannot see (and is very unlikely to click) the Submit All button except for the slide where you WANT them to see it.

Officejet Pro 8600 Plus will not print but is connected and says that the print job is 100% Complete

Hi All,
I'm printing from a MacBook Pro using OSX Lion. It says that Officejet Pro 8600 Plus is connected and that the print jop is
100% complete except that nothing comes out of the printer. I've done all of the test prints and they've printed just fine.
I tired all of the troubleshooting steps listed on the support guide and still nothing. HELP!

Not a reply but another plea for help.
There seem to be so many people with wireless problems that a) it seems silly to start a new thread and b) which one to enter my own plea.
-Printer bought about 2~3 weeks into Sept 2012
-Installed onto Macbook Pro running Lion (full updated at that time)
-Both wireless scanning from printer to computer and initiated from computer worked fine.
-Printer, with full choice of duplex, layout etc, worked fine. (Even left 5star feedback somewhere!)
-Set up eprint. That OK, too. Fine from iPad2 and SE Arc S printing photos.
-Somewhere along the line it stopped communicating with my MBP
-Out of interest, since there seemed to be no problems with an Acer laptop running Vista, I booted the MBP from an external drive on which I'd done a backup of my 10.6 system iMac (>300Km away: can't try that). Installed HP software from disc. Seemed fully functional. Odd. Very odd.
-Restarting with Lion on MBP, tried again. Looks as if it might work, but loses connectivity. Tried manual address on printer.
-Booting from 10.6 system again, reinstalled Lion on MBP (wondering if conflict between HP and Apple updates)
-Reinstalled HP software from disc.
Still didn't work.
-Brought Lion up to date. Downloaded most recent dmg file from HP. Looked for updates. Have applied firmware update to printer
8600 doesn't list my MBP as available computer to scan to
[But all the test pages done whilst in HP Utility, and others, get sent through]
Am getting rather fed-up with all this; never, ever before have I had so much printer problem.
There seem to be a number of Lion users out there with the same problem. So far -but very infrequently tried- other machines/systems seem OK, therefore I am coming to the conclusion that it is an Apple<> HP conflict. If not sorted soon the printer will be returned as it is not fit for purpose. I'll revert to using my seldom problematic, non duplex A3 Brother.
Hrumph
Please help, someone! Either with a pointer to something I've not yet tried or by analysis and rapid availablity of updated software.
Thanks,
Mike W

OAF Tutorial Extension - To add Site Name in Purchase Order Summary Page

I have gone through all steps for adding Supplier Site Name for Purchase Order Summary Page. It works but seems it shows SiteID instead of Site Name.
The main instructions says
Step 2.3 Create Your New View Object (VO)
Make a copy the PoSummaryVO query statement before you begin creating your new VO. Expand the oracle.apps.fnd.framework.toolbox.tutorial.server package in the Navigator pane and edit PoSummaryVO. In the View Object Editor, select Query to display the query statement for this VO. Make a copy of the query statement.
Create a new VO, named <YourName>PoSummaryVO, that extends oracle.apps.fnd.framework.toolbox.tutorial.server.PoSummaryVO.
Create the VO in the <yourname>.oracle.apps.fnd.framework.toolbox.tutorial.server package.
Add the oracle.apps.fnd.framework.toolbox.schema.server.SupplierSiteEO entity object. Leave the Read Only and Reference checkboxes checked. We are going to use this entity object only for read-only purposes.
Add the SupplierSiteId and SiteName attributes from the SupplierSiteEO entity object.
Paste the query statement that you copied from PoSummaryVO into the query statement field for <YourName>PoSummaryVO. Now append the following SQL phrases to the copy of the PoSummaryVO query statement to compose the query statement for the <YourName>PoSummaryVO.
SELECT ...,
SupplierSiteEO.SUPPLIER_SITE_ID,
SupplierSiteEO.SITE_NAME
FROM ...,
FWK_TBX_SUPPLIER_SITES SupplierSiteEO
WHERE ...
AND SupplierEO.SUPPLIER_ID = SupplierSiteEO.SUPPLIER_ID
Step 2.8 Personalize the UI to Display Your New Attribute
Rebuild the ExtendLab project and make sure you have no errors.
Run the <Yourname>PoSummaryCreatePG.xml page with personalization turned on (see Personalizing Your Pages and Portlets for more information on how this is done).
Select the Personalize Page global link.
In the Choose Personalization Context page, select Page: <Yourname> Framework Toolbox Tutorial: Multistep Create from the Scope poplist and select the Apply button.
In the Personalize Page page, check the Complete View radio button for the Personalization Structure. Expand the Stack Layout: Purchase Order Summary Region node, locate the Table: Purchase Orders Table entry in the page hierarchy and select the Create Item icon.
In the Create Item page:
Set the Item Style to Message Styled Text.
Set the ID to SiteName.
Set the Prompt to Supplier Site
Set the View Attribute to SiteName
Set the View Instance to PoSummaryVO1
Select the Apply button
In the Personalize Page Hierarchy page, locate the Table: Purchase Orders Table entry again and select the Reorder icon.
In the Reorder Contents of Table page's Site list, move the Supplier Site item to be sequenced immediately after the Supplier item.
Select the Apply button.
In the Personalize Page Hierarchy page, select the Return to Application link. Now you should see the Supplier Site column added to the Orders Table as shown in Figure 1 (you should see your name in the page title).
Note: We set the View Instance to PoSummaryVO1 and not <YourName>PoSummaryVO1. The BC4J substitution will take care of properly creating an instance of <YourName>PoSummaryVO1 at runtime in place of the PoSummaryVO1.
It does not show site name, it shows site id after havig done personalization.
Any idea why it would show site id and not site name.
KD

What I found is there are 2 variables SiteName and SiteName1, if you use SiteName1 then it shows proper value as a site description. I replaced SiteName with SiteName1 and it works. This might help to all who are like me and trying Tutorial example.
I am not sure how many may have tried OAF - Tutorial examples. They are really complicated and not easy and in most cases they are not coming out in first try but if you really try then it will give lot of understanding.

Is there an easy way to generate a 'summary' page?

Once the form is completely filled out - I want to condense a 14 page form to 2 pages - buy generating a summary and signature page.
Any chance that there is an easy way to generate a summary page built from the objects in the existing form?
So, it would just list caption/question and data value.
Or do I need to design a summary page with values that carry from the 'form' field to the 'summary' field (...ick...)?

You have to designer a summary page where you indicate what fields appear there and update their values based on the fields in the main part of the form.
Paul

Quiz score page font formatting?

I've created a quiz in Captivate 6. I have formatted the quiz results page to look the way I would like it to. This includes changing the font, color and style of the score variables that are displayed when a student completes a quiz. Any color formatting of the font for those variables works just fine, but no matter what font face or style (bold, italic, etc) I change it to, it always displays in Times regular when actually using the quiz after publishing. Is there something I'm missing or is it just not possible to change the font face of those auto-populated results? Seems like a pretty basic function.

The variable for the percentage that the user got is cpInfoPercentage. I agree, it should also have Quiz in it, but hasn't. That has confused a lot of users up till now.
Download my descriptive list with all system variables, link is in this post:
http://blog.lilybiri.com/system-variables-in-captivate-6
You can show a message (text container) based on the value of cpQuizInfoPassFail.
Here is another post that could be useful:
http://blog.lilybiri.com/intermediate-score-slides
Be sure I don't earn a dime with that blog, only started it to avoid always having to explain the same things in the forums.
Lilybiri

Opening a Specific Tab for each Navigation to Summary page.

Hi,
My JDeveloper version - 11.1.1.6.0
I have a summary page with 4 tabs.( General Information, Design, Channels and Capacity).
I have a table displaying list of entities. When I double click the entity, I open the summary page as a region.
First time the summary displays the 'General Information' tab.
Now I navigate to Channels tab.
Now I double click another entity in table, The selected entity summary is displayed, but Channels tab is displayed instead of 'General Information' tab.
Every time I would like to see the 'General infromation' tab by default.
Please let me know how can I achieve this.
Thanks
Ravi

I got the solution.
I referred to the other forum post: panelTabbed - first tab selected on page load
I implemented the logic in onPageLoad in summary task-flow init method.
Here is the code:
                 RichPanelTabbed panelTab = (RichPanelTabbed) ADFUtil.evaluateEL("#{backingBeanScope.panelTab}");
                 if (panelTab != null) {
                    List<UIComponent> childUIComponent = panelTab.getChildren();
                    if (childUIComponent != null && childUIComponent.size() > 0) {
                        for (int i = 0; i < childUIComponent.size(); i++) {
                             if (childUIComponent.get(i) instanceof RichShowDetailItem) {
                                 if (i == 0) {
                                     ((RichShowDetailItem)childUIComponent.get(i)).setDisclosed(true);
                                 } else {
                                     ((RichShowDetailItem)childUIComponent.get(i)).setDisclosed(false);
                 }Thanks for the inputs.
- Ravi

Cap 4 Quiz Results page not restoring data properly

I'm testing a Quiz built in Captivate 4 SCORM 1.2 which allows 5 attempts to achieve a passing score of 100. If the user fails, exits on the Quiz Results page, and then relaunches (bookmarked back to the Results page), the values displayed (score, number of questions correct, number of attempts) are not correct. Score is 1 or 4 or a random number, attempts goes back to 1. I am able to analyze the saved cmi data to see that the correct data has indeed made it to the LMS. And if the user clicks Retake for another attempt, the Results page will then update and show the correct number of attempts. So Captivate is reading in the saved number of attempts. But it seems like Captivate displays the Results page before it has fully retrieved the cmi data. Has anybody else had this issue? Any work-arounds?
Thanks in advance!

added these into pagdef (A/B)
Refresh="prepareModel"
RefreshCondition="${sessionScope.Loans != null && adfFacesContext.postback == true}" into your <iterator ............../>

Creating order summary page

Hi there, I have been having fun creating my website pages
until I got to the order page. How do I make a customers selections
show on the order page in a list? I can figure out how to make one
item show up with price/description/qty on the order summary page,
but what happens when there is more than one item selected? And how
can I make the price of the selected items add up automatically at
the bottom? I hope I haven't completely gone over my head with this
project! Thanks
Pouneh

what server-side script are you using. Depending on the
script you should be
able to code a loop to show multiple items, and also add the
price.
You cannot lose until you give up !!!
"pt35" <[email protected]> wrote in message
news:er3im1$lo3$[email protected]..
> Hi there, I have been having fun creating my website
pages until I got to
> the
> order page. How do I make a customers selections show on
the order page in
> a
> list? I can figure out how to make one item show up with
> price/description/qty
> on the order summary page, but what happens when there
is more than one
> item
> selected? And how can I make the price of the selected
items add up
> automatically at the bottom? I hope I haven't completely
gone over my head
> with
> this project! Thanks
> Pouneh
>

Multiple blog summary pages

I'm creating a new website for sharing news and photos for my family. I want to use the iWeb blog for my entries and plan to do some customization of my site through HTML snippits, iFrames, etc. I've been reading quite a bit on this forum and other useful sites on how to do more with iWeb, but I can't seem to find a solution for the following problem.
Let's say I allow 15 blog entries to be shown on my blog summary page yet over time I build a site with 50 or more entries. Then at least 35 will be on the archive page and that's alot to scroll through. I'd like to have the first 15 on blog summary page 1 then the next 15 on blog summary page 2, etc. Call it multiple archive pages if you will. But I want iWeb to keep track of the blog entries on those additional pages instead of me having to create new non-blog pages and copy and paste links to my entries.
Here's an example
http://allaboutiweb.com/
Any way to do this with iWeb 09?
FYI, I know there are a lot of other blogging software and hosting sites out there, but I want to use iWeb 09 because I've already created one site in the past with iWeb so I'm familiar with it. I also have a Mobile Me account with a domain name through goDaddy, so I'm publishing my iWeb site to Mobile Me with password protection.
Appreciate the help.

first, iweb limits blog summary to display 50 entries, so you are kinda limited if you want to have a continuous blog over the years.
if you have less than 50 entries per year, you have to break your blog into the year and have a master archive page and link all archive blog(s) to it.
once you decide what to do, you can use iweb rss feed widget to display the archive as feed, but i don't recommend iweb rss feed widget because it depends on mme server, unreliable at best.
instead you can use yahoo's pipes: http://pipes.yahoo.com/pipes/
yahoo pipes is reliable and flexible, you can build your own feed that you can merge other feeds into one or keep them separate, here is my example of merged feeds:
http://www.cyclosaurus.com/Home/CyclosaurusBlog/Entries/2009/7/25Not_iWebWidget.html
or you can tag blog entries by key words or categories, your users can narrow down the entries display with it, here my iweb blog tagging (click on any tagged word on the right side):
http://www.cyclosaurus.com/Home/CyclosaurusBlog/Archive.html
all code is linked to my examples. to do the above, you need to know yahoo pipes, ajax/javascript and iweb inner working parts.

Pages '08 will not complete save function. I must force quit to save.

Pages '08 will not complete save function. I must force quit to save.

When saving, try "Save As" but make sure "Include preview in document" is NOT selected.

How do I know if my iphone has successfully been backed up to my iTunes? I plugged it in and it said it backed up and I did a sync, but when I am looking through the summary page and I am not sure that all of my data got backed up. Please help!!

I have never backed up my iphone to my itunes because I always used the cloud. However, a few months ago, my wifi disk in my phone burned out so the Apple Store told me to back up everything to my itunes. I am going today to get the iphone 6 so I connected my phone (iphone 4S) to my itunes and I backed up and synced. However, when I look throughout the summary page and click in different areas (Photos, Movies), I don't see any of my data -- it is still asking me to Sync from iPhoto or to sync from another location. By backing up & syncing my phone, did all of my data get saved? Or do I still need to do more steps?
Sorry for the long winded question, I am just so nervous to get a new phone and plug it in to be restored and not have any of my pictures, videos or contacts, etc. Any help would be so so appreciated!

Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone

I can't open mail on Hotmail from Firefox. I can from Safari. I can open the Hotmail account page and it is complete w/ my new messages, but when I go to open them I get this messeage..."Please refresh your browser window. When you access your Windows Liv

I can't open mail on Hotmail from Firefox. I can from Safari. I can open the Hotmail account page and it is complete w/ my new messages, but when I go to open them I get this messeage..."Please refresh your browser window. When you access your Windows Live Hotmail account from more than one computer, we ask you to sign in again to help keep your account private and secure. " when I sign in again there is no change. in English
== URL of affected sites ==
http://http://sn135w.snt135.mail.live.com/default.aspx?n=2087215863
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

"Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
See http://kb.mozillazine.org/Clearing_the_cache and http://kb.mozillazine.org/Cookies

Aperture wont open and says "repairing library database" even when 100% complete it still wont open

my aperture won't open and says "repairing library database" even when it gets up to 100% complete it just suts there frozen and won't open to the aperture screen

How many Images? How much storage space does the Library occupy? Do you have plenty of free space on your system drive?
Ignore the progress bar — it's often stuck, and therefore unreliable.
Ignore Activity Monitor reporting Aperture "Not Responding". This is, imho, a bug Apple should have squashed years ago.
Repairing (or doing any operations an entire Library) a large Library can take hours or days. You did not report what you did to get past 79% — I'm going to guess you Force-quit Aperture. Force-quitting any database is always a bad idea and should only be done as a last resort. Each time you force quit, you are likely adding to your problem.
Restart the rebuild, and let it run, unmolested, for at least 40 hours. IME, at some point the progress bar with jump to 99%, then 100%, and then stay there for perhaps a few more hours, and then it finishes.
I have _never_ had a repair or a rebuild (I have not had to do many rebuilds) _not_ finish. One took about 82 hours, but it finished.
If your Library is small — say, fewer than 100,000 Images _and_ smaller than 100 GB — and you're seeing these very long rebuild times, you likely have an actual problem — but the only way I know to find out is to let the rebuild continue. (I don't store any but small video in Aperture, and very few of them, so my numbers may not correspond to Libraries that store videos.)
Did you notice any other problems before Aperture itself recommended rebuilding?
In short: let it run unmolested.

How to hide preview configurator summary page when launching configurator from iStore

Hi,
We have a requirement to hide preview configuration summary page in iStore whereas it should be visible when launching from other host applications.We tried doing it with help of usage functionality as below.
1) Create a usage with some name say “iStore” in configurator.
2) Take copy of summary with Status region template and add display condition to hide the summary region.
3) Take copy of the model active ui and attach the above template to it.
4) Publish the model with this new copy UI and usage as iStore to the host application.(There will be 2 publications one with this usage and other with normal)
5) Enable the profile CZ:Publication usage at application/responsibility levels for iStore.
With the above approach users are concerned that we need to maintain 2 User Interfaces in Configurator and each time any change has to be done both the user interfaces needs to be changes which will not be a feasible option in case of complex models.We would like to know if there is any other approach to hide this summary page from istore.
We are on R12.1.3 and are using fusion configurator engine.
Any suggestions on customizations/approach will be appreciated.

Create a Dynamic Action:
When
Event: Page Load
Condition: -No Condition -
True Actions
Action: Hide
Selection Type: jQuery Selector
Affected Elements: #t20PageHeader
Condition
Condition Type: Request = Expression 1
Expression 1: CRM

Cpt 3 - quiz summary page falsely triggers 100% completion

Similar Messages

Maybe you are looking for