[-10010] PI System Timed Out.

Hi Friends,
I am looking for some help to fetch data from OSI PI system. I am getting the below error while fetching historical data through MII (PCo Query)
I am able to fetch Current data. Time out issues comes only with hostorical data
Unable to perform Retrieve for
PI Point: 'BA:TEMP.1'. Error: Failed to retrieve events from server. [-10010] PI System Timed Out.
Is this error comes because of licence expiry? Please share your thoughts on this.
Thanks
Shaji

Please open a case with Hyperion Client Support. They can be reached at 203.703.3600 orhttp://www.hyperion.com/support/Joseph HoganSenior Essbase Lead Consultant203.703.3300 x6364

Similar Messages

Cannot download IOS5 keeps timing out, Cannot download IOS5 keeps timing out

Help!! Keep trying to download IOS5 (currently using 3). Has got to stage where downloads, says processing file and then says "system timed out try again". This has been going on for weeks now and system hasn't timed out, help???

fixitrod wrote:
The error message came when i was dnloading itunes 8 that an important component was missing and warned that if i continued with the install there might be problems. well the installation completed but when i went to download the iphone 2.1 update the download interrupts and i get a "timed out" error. i turned off anything that could possibly start. screensavers etc but don't know what could cause this firewalls
Try doing what dynamite said by installing itunes 8. Maybe do a google about the error. Ring microsoft or last resort is a reformat.

I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do?

I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.

Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC).

Chat System: ConnectException: Connection timed out: connect

Hi There,
I am developing a chat system as part of a University project.
To explain what I have implemented:
I have three java classes;
1. Chat Server class which is constantly listening for incoming socket connection on a particular socket:
while (true)
Socket client = server.accept ();
System.out.println ("Accepted from " + client.getInetAddress ());
ChatHandler c = new ChatHandler (client);
c.start ();
2. Chat Handler class uses a thread for each client to handle multiple clients:
public ChatHandler (Socket s) throws IOException
this.s = s;
i = new DataInputStream (new BufferedInputStream (s.getInputStream ()));
o = new DataOutputStream (new BufferedOutputStream (s.getOutputStream ()));
public void run ()
try
handlers.addElement (this);
while (true)
String msg = i.readUTF ();
broadcast (msg);
catch (IOException ex)
ex.printStackTrace ();
finally
handlers.removeElement (this);
try
s.close ();
catch (IOException ex)
ex.printStackTrace();
protected static void broadcast (String message)
synchronized (handlers)
Enumeration e = handlers.elements ();
while (e.hasMoreElements ())
ChatHandler c = (ChatHandler) e.nextElement ();
try
synchronized (c.o)
c.o.writeUTF (message);
c.o.flush ();
catch (IOException ex)
c.stop ();
3. Chat Client class which has a simple GUI and sends messages to the server to be broadcasted to all other clients on the same socket port:
public ChatClient (String title, InputStream i, OutputStream o)
super (title);
this.i = new DataInputStream (new BufferedInputStream (i));
this.o = new DataOutputStream (new BufferedOutputStream (o));
setLayout (new BorderLayout ());
add ("Center", output = new TextArea ());
output.setEditable (false);
add ("South", input = new TextField ());
pack ();
show ();
input.requestFocus ();
listener = new Thread (this);
listener.start ();
public void run ()
try
while (true)
String line = i.readUTF ();
output.appendText (line + "\n");
catch (IOException ex)
ex.printStackTrace ();
finally
listener = null;
input.hide ();
validate ();
try
o.close ();
catch (IOException ex)
ex.printStackTrace ();
public boolean handleEvent (Event e)
if ((e.target == input) && (e.id == Event.ACTION_EVENT)) {
try {
o.writeUTF ((String) e.arg);
o.flush ();
} catch (IOException ex) {
ex.printStackTrace();
listener.stop ();
input.setText ("");
return true;
} else if ((e.target == this) && (e.id == Event.WINDOW_DESTROY)) {
if (listener != null)
listener.stop ();
hide ();
return true;
return super.handleEvent (e);
public static void main (String args[]) throws IOException
Socket s = new Socket ("192.168.2.3",4449);
new ChatClient ("Chat test", s.getInputStream (), s.getOutputStream ());
On testing this simple app on my local host I have launched several instances of ChatClient and they interact perfectly between each other.
Although when i test this app by launching ChatClient on another machine (using a wi-fi network connection at home), on the other machine that tries to connect to the hosting server (my machine) i get a "connection timed out" on the chatClient machine.
I have added the port and ip addresses in concern to the exceptions to by-pass the firewall but i am still getting the timeout.
Any suggestions?
Thanks!

Format your code with [ code ] tag pair.
If you are a young university student I don't understand why current your code uses so many of
too-too-too old APIs including deprecated ones.
For example, DataInput/OutputStream should never be used for text I/Os because they aren't
always reliable.
Use Writers and Readers in modern Java programming
Here's a simple and standard chat program example:
(A few of obsolete APIs from your code remain here, but they are no problem.
Tested both on localhost and a LAN.)
/* ChatServer.java */
import java.io.*;
import java.util.*;
import java.net.*;
public class ChatServer{
ServerSocket server;
public ChatServer(){
    try{
      server = new ServerSocket(4449);
      while (true){
        Socket client = server.accept();
        System.out.println("Accepted from " + client.getInetAddress());
        ChatHandler c = new ChatHandler(client);
        c.start ();
    catch (IOException e){
      e.printStackTrace();
public static void main(String[] args){
    new ChatServer();
class ChatHandler extends Thread{
static Vector<ChatHandler> handlers = new Vector<ChatHandler>();
Socket s;
BufferedReader i;
PrintWriter o;
public ChatHandler(Socket s) throws IOException{
    this.s = s;
    i = new BufferedReader(new InputStreamReader(s.getInputStream()));
    o = new PrintWriter
     (new BufferedWriter(new OutputStreamWriter(s.getOutputStream())));
public void run(){
    try{
      handlers.addElement(this);
      while (true){
        String msg = i.readLine();
        broadcast(msg);
    catch (IOException ex){
      ex.printStackTrace();
    finally{
      handlers.removeElement(this);
      try{
        s.close();
      catch (IOException e){
        e.printStackTrace();
protected static void broadcast(String message){
    synchronized (handlers){
      Enumeration e = handlers.elements();
      while (e.hasMoreElements()){
        ChatHandler c = (ChatHandler)(e.nextElement());
        synchronized (c.o){
          c.o.println(message);
          c.o.flush();
/* ChatClient.java */
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.net.*;
import java.io.*;
public class ChatClient extends JFrame implements Runnable{
Socket socket;
JTextArea output;
JTextField input;
BufferedReader i;
PrintWriter o;
Thread listener;
JButton endButton;
public ChatClient (String title, Socket s){
    super(title);
    setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    socket = s;
    try{
      i = new BufferedReader(new InputStreamReader(s.getInputStream()));
      o = new PrintWriter
       (new BufferedWriter(new OutputStreamWriter(s.getOutputStream())));
    catch (IOException ie){
      ie.printStackTrace();
    Container con = getContentPane();
    con.add (output = new JTextArea(), BorderLayout.CENTER);
    output.setEditable(false);
    con.add(input = new JTextField(), BorderLayout.SOUTH);
    con.add(endButton = new JButton("END"), BorderLayout.NORTH);
    input.addActionListener(new ActionListener(){
      public void actionPerformed(ActionEvent ae){
        o.println(input.getText());
        o.flush();
        input.setText("");
    endButton.addActionListener(new ActionListener(){
      public void actionPerformed(ActionEvent ev){
        try{
          socket.close();
        catch (IOException ie){
          ie.printStackTrace();
        System.exit(0);
    setBounds(50, 50, 500, 500);
    setVisible(true);
    input.requestFocusInWindow();
    listener = new Thread(this);
    listener.start();
public void run(){
    try{
      while (true){
        String line = i.readLine();
        output.append(line + "\n");
    catch (IOException ex){
      ex.printStackTrace();
    finally{
      o.close();
public static void main (String args[]) throws IOException{
    Socket sock = null;
    String addr = "127.0.0.1";
    if (args.length > 0){
      addr = args[0];
    sock = new Socket(addr, 4449);
    new ChatClient("Chat Client", sock);
}

ALC-PDG-001-000-ALC-PDG-010-015-The conversion operation timed out before it could be completed. Please report this error to the system administrator.

I am getting the error when trying to convert a word file to pdf.
My Adobe Lifecycle ES is installed on 2GM RAM . Is this the issue for the below error.
ALC-PDG-001-000-ALC-PDG-010-015-The conversion operation timed out before it could be completed. Please report this error to the system administrator.
Please provide me a valuable solution. I am new to Adobe ls es.

This is a forum for Acrobat desktop product. For LiveCycle, try this forum
http://forums.adobe.com/community/livecycle/livecycle_es/pdf_generator_es

I have tried to update the operating system on my ipad several times without success. Each time it reaches 353.2mb of 353.2mb and starts to process the file. Nothing happens and then I get a message saying the network connection has timed out.

I have tried to update the operating system on my ipad several times without success. Each time it reaches 353.2mb of 353.3mb and starts to process the file. Nothing happens and then I get a message saying the network connection has timed out. The network is still connected.

Have you tried temporarily turning off your firewall and antivirus software whilst the download is happening ? A number of people on here have had success downloading it after doing so.

System.Web.HttpException: Request timed out.

Hi,
In custom web part I am getting the bulk data from SharePoint audit logs.
We are getting the below error when we have moved this to production.
System.Web.HttpException: Request timed out.
Please let me know to avoid the same.
Please provide your valuable inputs on the same.
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi Sudheer,
Please try to modify the web.config to this:
<httpRuntime maxRequestLength="51200" executionTimeout="3600" requestValidationMode="2.0" />
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778.Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding.

Hi,
I created a simple plugin and since i wanted to use Early Binding i added Xrm.cs file to my solution.After i tried registering the plugin (using the Plugin Registration Tool) the plugin does not gets registered and i get the below mentioned Exception.
Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this
operation may have been a portion of a longer timeout.
Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Xrm.Sdk.IOrganizationService.Update(Entity entity)
at Microsoft.Xrm.Sdk.Client.OrganizationServiceProxy.UpdateCore(Entity entity)
at Microsoft.Crm.Tools.PluginRegistration.RegistrationHelper.UpdateAssembly(CrmOrganization org, String pathToAssembly, CrmPluginAssembly assembly, PluginType[] type)
at Microsoft.Crm.Tools.PluginRegistration.PluginRegistrationForm.btnRegister_Click(Object sender, EventArgs e)
Inner Exception: System.TimeoutException: The HTTP request to 'https://demoorg172.api.crm.dynamics.com/XRMServices/2011/Organization.svc' has exceeded the allotted timeout of 00:01:59.9430000. The time allotted to this operation may have been a portion of a
longer timeout.
at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
Inner Exception: System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
And to my Surprise after i remove the Xrm.cs file from my solution the Plugin got registered!
Not understanding what exactly is the issue.
Any Suggestions are highly appreciated.
Thanks,
Shradha


Hello Shardha,
I really appreciate that you have faced this issue.This is really very strange issue and basically it occurs because of big size of your early bound class and slow internet
connection.
I would strictly recommend you to reduce the file size of your early bound class and then register.By default early bound class is created for all the entities which are
present in CRM(System entities as well custom entities).Such kind of early bound classes takes lots of time to register on server and hence timeout exception comes.
There is some standard define to reduce the size of early bound class.Please follow the link to get rid from big size of early bound class.
Create a new C# class library project in Visual Studio called SvcUtilFilter.
In the project, add references to the following:
CrmSvcUtil.exe(from sdk) This exe has the interface we will implement.
Microsoft.Xrm.Sdk.dll (found in the CRM SDK).
System.Runtime.Serialization.
Add the following class to the project:
using System;
using System.Collections.Generic;
using System.Xml.Linq;
using Microsoft.Crm.Services.Utility;
using Microsoft.Xrm.Sdk.Metadata;
namespace SvcUtilFilter
    /// <summary>
    /// CodeWriterFilter for CrmSvcUtil that reads list of entities from an xml file to
    /// determine whether or not the entity class should be generated.
    /// </summary>
    public class CodeWriterFilter : ICodeWriterFilterService
        //list of entity names to generate classes for.
        private HashSet<string> _validEntities = new HashSet<string>();
        //reference to the default service.
        private ICodeWriterFilterService _defaultService = null;
        /// <summary>
        /// constructor
        /// </summary>
        /// <param name="defaultService">default
implementation</param>
        public CodeWriterFilter( ICodeWriterFilterService defaultService )
            this._defaultService = defaultService;
            LoadFilterData();
        /// <summary>
        /// loads the entity filter data from the filter.xml file
        /// </summary>
        private void LoadFilterData()
            XElement xml = XElement.Load("filter.xml");
            XElement entitiesElement = xml.Element("entities");
            foreach (XElement entityElement in entitiesElement.Elements("entity"))
                _validEntities.Add(entityElement.Value.ToLowerInvariant());
        /// <summary>
        /// /Use filter entity list to determine if the entity class should be generated.
        /// </summary>
        public bool GenerateEntity(EntityMetadata entityMetadata, IServiceProvider services)
            return (_validEntities.Contains(entityMetadata.LogicalName.ToLowerInvariant()));
        //All other methods just use default implementation:
       public bool GenerateAttribute(AttributeMetadata attributeMetadata, IServiceProvider services)
            return _defaultService.GenerateAttribute(attributeMetadata, services);
        public bool GenerateOption(OptionMetadata optionMetadata, IServiceProvider services)
            return _defaultService.GenerateOption(optionMetadata, services);
        public bool GenerateOptionSet(OptionSetMetadataBase optionSetMetadata, IServiceProvider services)
            return _defaultService.GenerateOptionSet(optionSetMetadata, services);
        public bool GenerateRelationship(RelationshipMetadataBase relationshipMetadata, EntityMetadata otherEntityMetadata, IServiceProviderservices)
            return _defaultService.GenerateRelationship(relationshipMetadata, otherEntityMetadata, services);
        public bool GenerateServiceContext(IServiceProvider services)
            return _defaultService.GenerateServiceContext(services);
This class implements the ICodeWriterFilterService interface. This interface is used by the class generation
utility to determine which entities, attrributes, etc. should actually be generated. The interface is very simple and just has seven methods that are passed metadata info and return a boolean indicating whether or not the metadata should be included
in the generated code file.
For now I just want to be able to determine which entities are generated, so in the constructor I read from an XML
file (filter.xml) that holds the list of entities to generate and put the list in a Hashset. The format of the xml is this:
<filter>
<entities>
    <entity>systemuser</entity>
    <entity>team</entity>
    <entity>role</entity>
    <entity>businessunit</entity>
</entities>
</filter>
Take a look at the methods in the class. In the GenerateEntity method, we can simply check the EntityMetadata parameter
against our list of valid entities and return true if it's an entity that we want to generate.
For all of the other methods we want to just do whatever the default implementation of the utility is. Notice
how the constructor of the class accepts a defaultService parameter. We can just save a reference to this default service and use it whenever we want to stick with the default behavior. All of the other methods in the class just call the default
service.
To use our extension when running the utility, we just have to make sure the compiled DLL and the filter.xml file
are in the same folder as CrmSvcUtil.exe, and set the /codewriterfilter command-line argument when running the utility (as described in the SDK):
crmsvcutil.exe /url:http://<server>/<org>/XrmServices/2011/Organization.svc /out:sdk.cs /namespace:<namespace> /codewriterfilter:SvcUtilFilter.CodeWriterFilter,SvcUtilFilter
/username:[email protected] /password:xxxx
That's it! You now have a generated sdk.cs file that is only a few hundred kilobytes instead of 5MB.
One final note: There is actually a lot more you can do with extensions to the code generation utility.
For example: if you return true in the GenerateOptionSet method, it will actually generated Enums for each CRM picklist (which it doesn't normally do by default).
Also, the source code for this SvcUtilFilter example can be found here.
Use at your own risk, no warranties, etc. etc.
Please mark as a answer if this post is useful to you.

HT201303 I tried to update my security questions this morning but got timed out. Ive just tried to get into my account but the system does not recognise the answers to my question. How can I rectify this problem please

I was trying to update my Security Questions this morning but got 'Timed Out' I've just tried again to get into my security settings but the system does not recognise the information I'm putting in. Can anyone tell me how I can correct this problem. I can still log-in.
Best wishes

Welcome to the Apple Community.
You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

My husband forgot his apple id password but the system won't allow him to reset it - keep getting a timed out message. Help!

Of course, after he'd tried to reset it, I found the original password. But that now doesn't work and we can't reset the password. We can't even "find" the ID. We keep getting a timed out message, no matter what we try. Since he has no working Apple ID, I'm using mine to ask this question. Possibly relevant - he is NOT a big app user. I set up the account for him when he first got his iPhone a couple of years ago and he has only a few apps installed. So the card details may have expired but, of course, he can't update them either. He recently updated to the latest IOS (6.1.3) and it was when finishing the installation that he ran into the problems with forgetting his password.
Short of creating a new ID, does anyone have any bright ideas?

Call Apple Care for your country and request help resetting the password.

Trying to upgrade ipod to 5.0.1 and system keeps timing out

I have an ipod touch 4th gen and need to upgrade to 5.0.1. System times out and won't upgrade.

Have you tried disabling the computer's securty software during the download and update?
It could also be an Apple problem since some users have reported that error today even with the security software disabled.

Troubleshoting help needed: My iMac keeps crashing and restarting with a report detail: "spinlock application timed out" What can I do to fix this?timed out"

Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

My e-mails are not sending. "connection to SMTP server timed out." How do I get this working?

As of yesterday, I am receiving e-mails fine; however, unable to send. Everytime I try to send an e-mail, I get "Sending of message failed. The message could not be sent because the connection to SMTP server (my mail address) timed out. Try again or contact your network administrator.
I received help from lunarpages (they host my domain); however, they were unable to resolve the issue. They suggested something is blocking IP, or need to update Thunderbird, or there's a firewall there...
Help!!!
My clients are waiting for responses to e-mails!
Thank you.

To diagnose problems with Thunderbird, try one of the following:
*Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

I have an itunes acct. on my PC, but itunes doesn't allow me on using that acct. info. When I try to set up a new id on my ipad it says the session has timed out.

I have an itunes account on my PC and have downloaded Kindle and iBook with no problem, but when I try and use that acct id on my iPad the system says I cannot access the store. However, when I try to create a new id the system comes up and tells me that I am from Canada, which is always nice to know in case I ever forget, and when I acknowledge that screen, it immediately tells me the session has timed out. What am I doing wrong? Willingly admit I am not at all knowledgable in the Apple world. Thanks for any help you can give..

Carmell-
When I've had a similar problem, it was because I was accessing the iTunes store from a device I hadn't used before, such as when I upgraded from an iPad 1 to the iPad 2. It was a little confusing to me until I figured it out.
All I had to do was use the ID of my existing account and play along with the iTunes store. As I recall, it asked for my password twice, and the security code from the back of my credit card. After that, downloads proceeded as before.
Fred

[SOLVED] Issue with eth0 (eth0: timed out)

Hi there people, just installed Arch on my PC (again). The first time I had no problems with this, but now it is really bothering me. Well, my PC only access the net via wireless, so I have no wired connection for it. Here's my /etc/rc.conf:
# /etc/rc.conf
eth0="dhcp"
wlan0="dhcp"
wlan_wlan0="wlan0 essid MySpot key ABCDEFABCDEF1234567ABCDEFC"
INTERFACES=(eth0 wlan0)
Well, everything is working fine, I can get access to the internet on bootup. My only concern is that my system is taking awfully long to boot. It takes about 1-2 minutes on "::Starting Network", then it shows me "eth0: timed out". Then it takes about 10 secs to start my wlan0 interface and the system finishes booting. I had previously installed Arch 2008.12, and the Starting Network only took about 10 secs to start my wlan0. I have already tried commenting out the eth0 line and putting a ! in front of eth0 on INTERFACES, but doing that only shows me an error message for my wlan0 and render my internet unusable on system bootup. So, my questions are:
1) Do I really need the eth0 interface for my connection (since I'm using wlan0 for wireless connection) ? Why can't I comment it out?
2) If I really need eth0, how can I make my boot time go faster, or how can I make it not time out?
Thanks in advance for any help given...
EDIT: problem solved, see Post 8 below for answers...
Last edited by gabscic (2009-03-25 03:40:43)

Thanks for answering. Well, I think eth0 is being detected correctly. Here is the output for ifconfig:
eth0 Link encap: Ethernet Hwaddr 00:18:F3:87:97:41
UP BROADCAST MULTICAST MTU: 1500 Metric: 1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:19
lo Link encap: Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU: 16436 Metric: 1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wlan0 Link encap: Ethernet Hwaddr 00:15:AF:09:BC:E7
inet addr: 192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU: 1500 Metric: 1
RX packets:1903 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:615024 (606.6 Kb) TX bytes:1020 (1020.0 b)
wmaster0 Link encap: UNSPEC Hwaddr 00-15-AF-09-BC-E7-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU: 1500 Metric: 1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Well, I hope that can help. Searched the net and the forums, and every problem related to this is with people who are actually trying to use the eth0 interface for connection. In my case, I don't think I need it, I only need the wlan0. What I'm trying to do is get rid of eth0 while letting wlan0 work.

[-10010] PI System Timed Out.

Similar Messages

Maybe you are looking for