101.60 smallest value in custom file dimensions

I have photo lab that provides 150mm*100mm paper. When I try to put in Custom File Dimensions in Print Job in the print tab I get a number between 101.60 to 2540.00 is required. Closet value inserted. Is it mapping to my local printer? I cannot understand this? I use the export function in library part I can export to 150mm*100mm papers. For me printing is (to jpg) sending to photo lab in town. Is the any workaround?

Annoyingly, the custom size thingie has a minimum size of 4 inches. I cannot understand the reason behind this. You can circumvent it by simply selecting a lower ppi for the output. So if you want to print a 2 inch wide image at 300 ppi, you simply set the width to 4 inches and give it 150 ppi in the file resolution field. Remember that the only thing that matters is the number of pixels in the file. The lab will scale it correctly for you to the actual paper size. Also, the lab actually scales a little different from what you see as they have to have a small bleed around the image to avoid white borders.
Lastly Dorin is right that the lab machines in Europe actually use imperial sizes even though they quote the sizes in rounded metric units. So 10x15 is in reality 4x6 inches or 10.16 x 15.24 cm.

Similar Messages

Finding the smallest value from an array

Hi there :)
I started learning Java a few days ago and have now run into my first problem :p
I am using Netbeans on Mac OS X.
I need to find the smallest value from an array. So far I've had no luck. Any suggestions would be fantastic.
The code so far:
* Math Problems
* Created on May 4, 2007, 10:54 AM
* PROJECT 1: - IN PROGRESS
* Create a program that allows you to create an integer array of 18 elements with the following values
* 3, 2, 4, 5, 6, 4, 5, 7, 3, 2, 3, 4, 7, 1, 2, 0, 0, 0
* - The program computes the sum of elements 0 to 14 and stores it in element 15 // COMPLETED
* - The program computes the average and stores it in element 16 // COMPLETED
* - The program finds the smallest value from the array and stores it in element 17
* PROJECT 2: - TO DO
* Write a program that accepts from the command line and prints them out. Then use a for loop to print
* the next 13 numbers in the sequence where each number is the sum of the previous two. FOR EXAMPLE:
* - input>java prob2 1 3
* - output>1 3 4 7 11 18 29 47 76 123 322 521 843 1364
* PROJECT 3: - TO DO
* Write a program that accepts from the command line two numbers in the range from 1 to 40. It then
* compares these numbers against a single dimension array of five integer elements ranging in value
* from 1 to 40. The program displays the message BINGO if the two inputted values are found in the array
* element. FOR EXAMPLE:
* - input>java prob3 3 29
* - output>Your first number was 3
* - Your second number was 29
* - Its Bingo! // This message if 3 and 29 are found in the array
* - Bokya! // This message if 3 and 29 are not found in the array
* - The array was 7 5 25 5 19 30
* PROJECT 3 EXTENSION: - OPTIONAL
* Generate the array of 5 unique integers using random numbers
package mathproblems;
* @author Mohammad Ali
public class Main {
 /** Creates a new instance of Main */
 public Main() {
 * @param args the command line arguments
 public static void main(String[] args) {
 int A[]={3,2,4,5,6,4,5,7,3,2,3,4,7,1,2,0,0,0};
 int O = A.length - 3;
 int B = A[0] + A[1] + A[2] + A[3] + A[4] + A[5] + A[6] + A[7] + A[8] + A[9] + A[10] + A[11] + A[12] + A[13] + A[14];
 A[15] = B; // Stores the sum of the integers in A[15]
 int C = B / O;
 A[16] = C; // Computes and stores the average in A[16]
 int D = 101;
 if (A[0] < A[1]) { D = A[0]; }
 else { D = A[1]; }
 if (A[1] < A[2]) { D = A[1]; }
 else { D = A[2]; }
 System.out.println("There are " + O + " numbers in the Array");
 System.out.println("Those numbers add up to " + B + ".");
 System.out.println("The average of those numbers is " + C + ".");
 System.out.println("The smallest value in the array is " + D + ".");
}The code is incomplete, but it works so far. The problem is I know there must be an easier way. SAVE ME :)

OK :)
Just thought I should show you the output as to help anyone else with the same problem:
* Math Problems
* Created on May 4, 2007, 10:54 AM
* PROJECT 1: - IN PROGRESS
* Create a program that allows you to create an integer array of 18 elements with the following values
* 3, 2, 4, 5, 6, 4, 5, 7, 3, 2, 3, 4, 7, 1, 2, 0, 0, 0
* - The program computes the sum of elements 0 to 14 and stores it in element 15 // COMPLETED
* - The program computes the average and stores it in element 16 // COMPLETED
* - The program finds the smallest value from the array and stores it in element 17 // COMPLETED
* PROJECT 2: - TO DO
* Write a program that accepts from the command line and prints them out. Then use a for loop to print
* the next 13 numbers in the sequence where each number is the sum of the previous two. FOR EXAMPLE:
* - input>java prob2 1 3
* - output>1 3 4 7 11 18 29 47 76 123 322 521 843 1364
* PROJECT 3: - TO DO
* Write a program that accepts from the command line two numbers in the range from 1 to 40. It then
* compares these numbers against a single dimension array of five integer elements ranging in value
* from 1 to 40. The program displays the message BINGO if the two inputted values are found in the array
* element. FOR EXAMPLE:
* - input>java prob3 3 29
* - output>Your first number was 3
* - Your second number was 29
* - Its Bingo! // This message if 3 and 29 are found in the array
* - Bokya! // This message if 3 and 29 are not found in the array
* - The array was 7 5 25 5 19 30
* PROJECT 3 EXTENSION: - OPTIONAL
* Generate the array of 5 unique integers using random numbers
package mathproblems;
* @author Mohammad Ali
import java.util.Arrays;
public class Main {
 /** Creates a new instance of Main */
 public Main() {
 * @param args the command line arguments
 public static void main(String[] args) {
 int A[]={3,2,4,5,6,4,5,7,3,2,3,4,7,1,2,0,0,0};
 Arrays.sort(A);
 System.out.println("The smallest value in the array is " + A[0] + ".");
 int num = A.length;
 System.out.println("There are " + num + " values in the Array.");
 int sum = 0;
 for (int i = 0; i < A.length; i++) {
 sum+=A;
 System.out.println("Those numbers add up to " + sum + ".");
 double d = (double)sum/num;
 System.out.println("The average value of those numbers is " + d + ".");
What Iearned:
1) How to create for loops properly
2) How to import java.util.Arrays ( =D )
3) How to get a more accurate average using double instead of int
4) This forum is the best and has very helpful people 24/7 ( =D)
Thanks Again,
Mo.

Can I create an automatic custom file save name/path once I click digital signature field?

Hi,
What I'm trying to do is once I click on a digital signature and I add my digital signature it requires me to sign it. I want to know if there's a workaround to where once I click it it will automatically save to a file name based on a field and to a pre-determined directory? Say, if I want it to save to a users desktop. My supervisor is wanting to eliminate his employees having to change the file name to the format he wants and selecting the save location and make it automatic for everyone to have it saved at the same location on their computers.
Will likely have everyone in the office create a folder named 'Leave Requests'. This will be the location on the desktop where all these automatically saved files would go. The custom file name would be Emp_Name + "Leave Request" + Date where Emp_Name and Date are 2 variables that are user inputted field values on the form. I have looked around but there doesn't seem to be too much on this one. I do realize I can't create a custom 'Save As' location and path name but I have read a little about creating a custom automatic save feature and wanted to know if I could implement that. Here is the information I read about:
http://acrobatusers.com/tutorials/print/how-save-pdf-acrobat-javascript
I appreciate all help any of you can give me in this matter. Thanks!!!

This tutorial is great!
http://mydesignpad.com/create-a-complex-html-email-signature-for-mail-on-mac-os- x-10-9-mavericks

Custom File Info Panel Multi select options

Hi,
I have created a custom file info panel and working on simple properties.
it does not have options for provisioning a multi select list box. Say for example, I want to select multiple values from the dropdown values.
How should i do it? Any help is much appreciated.
Thanks,
Sriram

Hi,
Following is my sample property file. I want to make the property "Line Year" to be multiselect.
<xmp_definitions>
</xmp_schema prefix='x' namespace='x....'
 <xmp_property name='LineYear' category='external' label='Line Year' type='closedchoice' element_type='text'>
 <xmp_choice raw_value="2007" label="2007"/>
 <xmp_choice raw_value="2008" label="2008"/>
 <xmp_choice raw_value="2009" label="2009"/>
 </xmp_property>
 </xmp_schema>
</xmp_definitions>

Custom File Processor implementing UploadedFileProcessor

I am implementing a custom file processor since upload of files will be in GB, Faces Context is not available it gives NULL also the ServletRequest Object available seems to be a trimmed instance as it not could list any parameter values..
Any idea on how to read parameter from request inside that class or to get to FacesContext?

Hi Bowen,
Here's the example DataPlugin closest to what you're describing.
You can also look at Exercise 5 from the DIAdem Hands-On, posted here:
http://www.ni.com/example/30393/en/
Brad Turpin
DIAdem Product Support Engineer
National Instruments

XMP data not showing up in the custom file info panels when upgraded to CC

For several versions of Photoshop, I have been able to use a modified custom file info panel to input, update, and track psd files. With each version of photoshop there are always some changes in the way the object data is handled. The lastest challenge is:
1. XMP data not showing up in the custom file info panels when upgraded CC from CS6.
2. Raw data is not visible in CC in the File info panel.
3. This occurs in new documents where we create the xmp wrapper while the file template is built.
4. When metadata is manually entered into the file, the data is not added to the XMP wrapper when it is recreated on the save.
5. When a file that was created in CS6 is opened that contains the Metadata in the file info template. It is visible. the Raw data is also visible. Once the XMP wrapper is recreated - write and then close. The data is no longer available. the Raw data will not pull up in the file info panel.
Any feedback or a direction will be appreciated.

I have a script that the user runs to input xmp data into a Customized version of the generic file info panel. it is data that is gathered from the user when the psd file is created. once the file is open in photoshop. the information is visible in the File info panel , the raw data, and as a schema addition in the advanced tab.
in CC the nodes and the children of the XMP packet have changed positions. so that the XML -this.XMP.child(0).appendChild(this.createNode())
is no longer the node that can be appended.
Where XML.child(0).elements().length(); would enable the xmlns to be added in CS6
<rdf:Description xmlns:phsa="' + this.namespace + '" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:x="adobe:ns:meta/" rdf:about="" />'
it is visible in CC as namespace in a different arrangement. XML.child(0).child(0).namespaceDeclarations().toString()) and the children are XML.child(0).child(0).elements().length().toString()); There are now 7 child nodes where before there were 1.
with all shifted, the initialize of the values and the delete XMP packet wrapper and create new or the amend to the XMP packet wrapper is undefined.

XMP Custom File Info panels vs. Custom Metadata

Sorry if this question is a little confused, but I don't exactly know what I am talking about yet.
I use Rob Cole's custom metadata plug-in, which is great as far as it goes. As I understand it, it is a way to create custom data fields in the Lightroom database, give them labels, and manipulate and sort images according to those values. It is very useful for what it is. However, where it shows its seams is when you want to edit an image outside of Lightroom and then import the image back into Lightroom (for instance exporting the image, or editing it in Photoshop). In that case there is no way to get the data in the original into the derived copy except by doing it by hand, which can be very labor intensive if you, say, export a few hundred or a few thousand images. And, of course, you can only see the custom metadata in Lightroom, since it doesn't live in the file.
If I understand it correctly, "Custom File Info panels" for xmp data should just solve this problem. You would define your data, and it would be understood by "standard Adobe applications". A brief search of the web does not indicate that Lightroom is one of these "standard Adobe applications", so I assume that while I can use these panels in Bridge and in Photoshop, the data would not be available to me in Lightroom?
Any insight?
Thanks
Alan
robcole

alanterra wrote:
there is no way to get the data in the original into the derived copy except by doing it by hand
Better ways:
1-1 or 1-many:
(on the file menu: plugin extras) which brings up:
If you want to do "many to many-others-like-them", you have to use a different plugin, like Relative Antics..
alanterra wrote:
If I understand it correctly, "Custom File Info panels" for xmp data should just solve this problem.
Many of us are hoping Adobe enhances Lr to provide better support for custom metadata - as you've noticed, Lightroom is not one of those "Standard Adobe Applications" referred to in the above link.
Rob

Problems with Custom File Info Panel and Dublin Core

I'm creating a custom file info panel that uses the values of the dublin core description and keywords (subject) for two of it's own fields. I'm having problems with the panel saving if they enter the description on the custom panel first, and with the keywords not echoing each other, or reappearing after a save. Here is the code for the panel <?xml version="1.0"> <!DOCTYPE panel SYSTEM "http://ns.adobe.com/custompanels/1.0"> <panel title="$$$/matthew/FBPanelName=Testing for Matthew" version="1" type="custom_panel"> group(placement: place_column, spacing:gSpace, horizontal: align_fill, vertical: align_top) { group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top) { static_text(name: '$$$/matthew/keywords = Keywords', font: font_big_right, vertical: align_center); edit_text(fbname: '$$$/matthew/keywordsFB = Keywords', locked: false, height: 60, v_scroller: true, horizontal: align_fill, xmp_ns_prefix: 'dc', xmp_namespace: 'http://purl.org/dc/elements/1.1/', xmp_path: 'subject'); } group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top) { static_text(name: '$$$/matthew/description = Description', font: font_big_right, vertical: align_center); edit_text(fbname: '$$$/matthew/descriptionFB = Description', locked: false, height: 60, v_scroller: true, horizontal: align_fill, xmp_ns_prefix: 'dc', xmp_namespace: 'http://purl.org/dc/elements/1.1/', xmp_path: 'description'); } group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top) { static_text(name: '$$$/matthew/season = Season', font: font_big_right, vertical: align_center); popup(fbname: '$$$/matthew/seasonFB = Season', items: '$$$/matthew/Season/Items={};option 3{option 3};option 2{option 2};option 1{option 1}', xmp_namespace:'http://monkeys.com/demo/testingmatthew/namespace/', xmp_ns_prefix:'matthew', xmp_path:'season'); } group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top) { static_text(name: '$$$/matthew/ltf = Limited Text Field', font: font_big_right, vertical: align_center); edit_text(fbname: '$$$/matthew/ltf = Limited Text Field', locked: false, horizontal: align_fill, xmp_namespace:'http://monkeys.com/demo/testingmatthew/namespace/ ', xmp_ns_prefix:'matthew', xmp_path:'ltf'); } } </panel> Thanks for the help

To answer my own question:
The documentation really sucks.
I found this reply from Adobe <http://forums.adobe.com/message/2540890#2540890>
usually we recommend to install custom panels into the "user" location at:
WINDOWS XP: C:\Documents and Settings\username\Application Data\Adobe\XMP\Custom File Info Panels\2.0\panels\
WINDOWS VISTA: C\Users\username\AppData\Roaming\Adobe\XMP\Custom File Info Panels\2.0\panels\
MAC OS: /user/username/Application Data/Adobe/XMP/Custom File Info Panels/2.0/panels/
The reason why your panels did not work properly was a missing Flash trust file for that user location. Without such a trust file the embedded flash player refuses to "play" your custom panel.
Please see section "Trust files for custom panels" in the XMPFileInfo SDK Programmer's Guide on page 50 for all details on how to create such trust files.
After many wasted hours I have now the simple panels running.
Cheers,
H.Sup

Setting default property value in custom componenty

I'm a Flash newbie trying to build a custom component using
Flash MX 2004. basically it's an enhanced version of the standard
label component. Everything seems to work fine except when trying
to set default text or assigning a text value in the "properties"
window (the field displays in the properties window, but any value
typed into it does not appear during movie playback). Currently,
the text can be seen only in authoring mode, not when the movie
plays. The only way for the text to displayed during playback is to
set it up through code. Does anybody know what I'm doing wrong? .as
file content follows.
class CustomComponents.FormFields.lblFieldLabel extends
MovieClip {
private var objFieldLabel:MovieClip;
private var strText:String = "";
function lblFieldLabel() {
init();
public function init():Void {
public function get displaytext():String {
return strText;
[Inspectable(defaultValue="display text", type="String")]
public function set displaytext(val:String):Void {
strText = val;
objFieldLabel.text = strText + ":";
}

I have posted a response to your duplicate post here Set a default value in Custom.pll

Two Custom File Info Panel Issues

When I add a second custom file info panel that has a different name (panel, .xml, and folder), the panel name that appears is the same as the first. What is causing this?

Hi,
here is how it works:
If you open the properties.xml you will find a zString key for every label:
i.e. label="$$$/Custom/Schema/Label=Custom Properties" (which is the panel name).
Depending on the language of the application it will load the values from the zstring files. If there are no files it will use the value of the properties.xml.
So if you want to change any label it is not enough to change the value in the properties.xml or the folder name. Is you leave the key as it is it will load the value based on the key. So you have to change the key and value in both the properties.xml and the Generic_en_US.dat and all other language files you would like to support.
example:
properties.xml:
label="$$$/Custom/Schema/Label2=Custom Properties 2"
*.dat:
"$$$/Custom/Panel/Label2=Generic Panel 2"
Or you remove the Keys completly from the properties.xml, but then multilanguage is not supported.
Hope this helps,
Samy
P.S. You can test different languages by changing for example Bridge to a different language (in the settings) and restart it. If you then open FileInfo it will load the correct *.dat files based on the language. You can add more *.dat files for more languages for you panel if you like.

Adding Custom 1 dimension to all Balance Sheet and all PL accounts

We added the Custom 1 dimension to all Balance Sheet and all PL accounts. Previously we only had a the Custom 1 dimension added to a few PL accounts.
Now it takes a very long time to consolidate and we are getting warnings in the log files as follows:
One example:
The Node cube Scenario = Actual, 1, Year = 2009 2009, Entity = MS_UKD 589, InputValueID = USD 17, contains 110182 records
We are consolidating a month that does not have any data in the product lines for the accounts where the product lines were added.
Is this slowness in consolidation to be expected when doing this?
Is there any rule or best practice to adding the custom 1 dimension to a volume of accounts?
Thanks!

Essentially, customs are more like sub-accounts than extra dimensions. The warning you got is not new, but this may be the first time you've noticed it. The node is a subcube that must be completely loaded to RAM on the server to do the consolidations. Take your accounts and multiply by custom 1 to see how many additional records are going into the sub cube (2797 x 232 = 648,904). You may want to have your DBA watch the server as you consolidate to see how many resources are being used and if he/she can tweak some settings to help out.
That being said, my system has 6000 accounts, 2500 custom 1, and 1000 custom 2, but only 600 entities total in 3 hierarchies. Our full consolidation takes an hour, but doing only impacted for the current month takes about 20 minutes.

Is there a 2GB file size limit on saving a custom format plugin for a custom file type?

I have resolved issues on reading files > 2GB. Now when I save files >2GB, I get a popup that states there is a 2GB limit for plugins.
I an using photoshop CS6 on a MAC OSX 10.9 with 16 GB RAM.
The custom file type is what should be selected when the Save As Dialogue is visible.
I looked for a setting in the Photoshop preferences for Files & setting to PSB, but did not see one.
I tried modifying values in the PiPL for formatmaxSize and PluginMaxSize, but the only values that the code will compile in with:
32767 & 2147483647.
I saw a posting in previous years that custom plugins were limited to 2 GB.

I would like to rephrase my question, now that I have worked a little more with my code.
Is there a 2GB limit per channel and 4GB limit for total file size for a custom photoshop format plugin?

Read Specific value/Search Into file

Hi i need a java code which read specific value from a file.
Example:
I have a text file named data.txt
it contain :
Customer Name :Sarwar
Customer Id : 001
Product Price :2000
now how can i take values 001 and 2000 from the file data.txt and save them in a another text file named new_data.txt ?
Can any one help me?

Search Google for 'java file read'. Wanna write to a file? Search for 'java file write'. Ain't Google awesome?
If you haven't already done so, I suggest you search www.amazon.com for a beginner book on Java that has good reviews. Its much more efficient to read a book on Java than spend countless hours trying to learn it through code examples found on the internet.

In this case, how would you save values to a file?

Hi,
I need your advice. I have a Vi with lots of controls and the user can change many settings.
If I stop and start the vi again, you'll surely know, all settings are back to default, due to the fact that LabVIEW unfortunately does not allow to make values default programmatically.
Nevertheless there are many possibilities to save and load the settings. But which one is the best in my case?
I have boolean buttons, over 60 numeric controls, two file pathes and one numeric array.
I could write all of them separated by tabs in a text file (see screenshot), and read them back - but this is very laborious and prone to mix-up.
I tried clustering, but it's not possible due to the array, which I cannot put into a cluster.
What would be the best and simplest way to accomplish this saving and reading of the settings? What would you recommend?
Greetings
Johannes
LabVIEW 7.1.
Windows XP Professional 2002 SP 2
Intel Core 2 Duo, 2,4 GHz
Message Edited by candidate on 12-01-2008 10:00 AM

You could write a VI that set values from a file using VI server. With VI server you get references to all controls and create a list of label.text. When you read the value for "Smierung" you search the index of the reference to that control in the label array and set the value using "Value" property.
Play around with VI server and control references.
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

File dimension

File dimension
I'm working on a file with AI CS4 (14.0.0), coupled with Map Publisher 8.3.3, on a IMAC (intel core 2 Duo, Mac OSX 10.6.8).
The file is a map with a TIFF as topographic base and the vectorial drawning by AI. The file was about 200 Mega in size, but after little changes, the dimension exploded to the double, something around 400 Mega. Any idea about what happened and how to reduce the file dimension?
Thanks

Thank you Mike.
We try what you suggested and the file dimension decreased to a value very similar to that before the accident.
Thanks a lot
Il giorno 30/ago/2011, alle ore 19.40, Mike Gondek ha scritto:
Save as to a test file with no embedded or linked imaegs, is the file small and fast now?
If not then check all your pallettes for a large amount of swatches, graphic styles, symbols, brushes. If you find some delete all unused using the flyout menu, or the default action Delete Unused. Do they come back, then search the forums for deleted global colors, huh error.
>

101.60 smallest value in custom file dimensions

Similar Messages

Maybe you are looking for