11.1.1.5 - Column Heading Alignment not working

I've created a simple one-column analysis, and I'm viewing the Table. I'd like to center the column header (currently it is left-aligned).
In the Layout section for the Table view, I'm selecting Format Headings from the column's option icon.
Changing the font characteristics works fine. Changing the cell background color works. However, changing the Horizontal Alignment and Vertical Alignment have no effect.
I've also tried this on the on the Column Properties ... Column Format for the column, selecting the formatting icon next to the Column Heading field. No luck there either.
Where is the correct place to change the alignment for column headings?

hi
try this....
1. select criteria and go to column properties
2.Select Column Format(second tab) ->Column Heading ->format ->set the center for cell horizontal and vertical.
if you selected sort for this column, the center alignment is not working.
Thanks
Edited by: Kavitha on Jul 1, 2011 4:15 PM

Similar Messages

SET command and column heading are not working

Hi All,
Am trying to create sql reports using SET and Column headings as given below.It's saying missing or invalid option.
But when i execute this in SQL*PLUS it's working fine.. is this limitation in AE edition. Please advice.
Also tried with sql script execution, still same problem.
set pagesize 100;
set linesize 80;
column ename heading "employee name";
select * from emp;
Regards,
Anil

user575819 wrote:
Please update your forum profile with a real handle instead of "user575819".
Am trying to create sql reports using SET and Column headings as given below.It's saying missing or invalid option.
But when i execute this in SQL*PLUS it's working fine.. is this limitation in AE edition. Please advice.
Also tried with sql script execution, still same problem.
set pagesize 100;
set linesize 80;
column ename heading "employee name";
select * from emp;
SET and COLUMN are SQL*Plus client commands, not part of the SQL language, and thus they cannot be used in APEX report queries. Consult the APEX documentation for information on creating reports. If you are unfamiliar with APEX, start with the 2 Day Developer's Guide tutorial, which covers creating APEX reports.

MG2100 Printer Head Alignment not working for color ink?

Hi,
I have a Canon MG2100, and I just changed the color ink. When I print something in color I get magenta lines through the image. I realized I had to align the heads and have been trying to do both the automatic and manual methods of aligning the printer heads. I click color every time, but when the printer prints the sheet I'm supposed to scan or input values, there are no color values printed, only the black and white? I assume it needs the color values since the manual has them... What am I doing wrong?
Here's a picture:

Hi bgill93.
First, please make sure that the ink installed in the printer is the correct ink. The correct ink cartridges are the PG-240 black and the CL-241 color.
Next, a test page should be printed. The nozzle check pattern shows if each print head nozzle is operating properly.
1. Ensure that the printer is powered on and the LED displays a 1.
2. Open the paper output tray.
3. Load a sheet Letter-sized plain paper in the Auto Sheet Feeder.
4. Press the <Maintenance> button to display [A]. The Maintenance button is the button on the Operator's panel which has the wrench and screwdriver label above it.
5. Press the Black Start button. The machine will print a nozzle check pattern. Please compare the test page that you printed with the one at the bottom of this post.
If the test page does not match the example attached to this email, printhead cleanings should be performed. To do this, please follow these steps:
1. Ensure that the printer is powered on and the LED displays a 1.
2. Press the <Maintenance> button once to display [H].
3. Press the Black Start button. The cleaning will commence.
After performing a few cleanings, please print another test page.
If you continue to have difficulties, it is recommended that the ink cartridges are replaced.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

"Quit" in ITS Header does not work properly

Hello,
we have a self-made ESS Service in use (http://itshost:port/scripts/wgate/zmfa/!). In this service the "Quit" Link in the ESS header does not work.
When we start e.g. the pz04 transaction on the ITS (http://itshost:port/scripts/wgate/pz04/!) the "Quit" button does work properly, and ends the ITS Session.
I already tried to set the ~exiturl to a close_window.html file, but still it doesn't work in the self-made service.
This line is included in the service:
`include(~service="system", ~language="", ~theme="dm", ~name="TemplateLibraryDHTML.html")`
I guesss changing the templatelibrarybasis.html won't work, since the pz04 also uses this template, and there it works. We don't want to remove these "Quit" and "Help" links in the header, since they are still being used (due to older Release of R/3, no Portal App).
It's a standalone ITS 6.20, latest patch, newly installed.
Anybody have an Idea?
Thanks.
Regards,
Daniel

Usually the profiler gives higher execution times than is true, since it is using resources itself. Make sure the profiler is started before starting the program (while in edit mode vs run time mode). Wait for the completion of all vis, then stop the profiler.
Of course, the sub vis may actually execute faster than the profiler can discriminate (eg faster than a microsecond), which happens frequently.
2006 Ultimate LabVIEW G-eek.

Group by with column alias does not work?

Hello,
The column alias is not working in the group clause?
select col1,col2-col3 "col23", sum(col4)
from table1
group by col1,col23
Error is col23 is invalid identifier.
Thank you.

I guess it's the double quotes around bonus:
SQL> select empno, deptno, sum(bonus)
2 from
3 (
4     select empno, (sal + 500) bonus, deptno
5     from emp
6 )
7 group by empno, deptno
8 ;
               EMPNO               DEPTNO           SUM(BONUS)
                7900                   30                 1450
                7369                   20                 1300
                7499                   30                 2100
                7521                   30                 1750
                7566                   20                 3475
                7654                   30                 1750
                7698                   30                 3350
                7782                   10                 2950
                7788                   20                 3500
                7839                   10                 5500
                7844                   30                 2000
                7876                   20                 1600
                7902                   20                 3500
                7934                   10                 1800
14 rows selected.

Aggregation in column expression is not working in 11.1.1.7.1

Hi Guru's,
After upgrading the application from 11.1.1.6.8 to 11.1.1.7.1 Aggregations in the column expression is not working. I was using the below formula in the column expression
100.0* (Sum((CASE WHEN Service Level >= 60 THEN 1 ELSE 0 END)) / COUNT(DISTINCT(HOUR_INTERVAL)))
I am getting the answer but the values are very high compare. I tried using just Sum((CASE WHEN Service Level >= 60 THEN 1 ELSE 0 END) it also giving very high values.
Please let me know is there is a bug or something need to setup.
Regards
@li

bug 16616127 has been fixed in 11.1.1.7.1
make sure you refresh the catalog to upgrade to your version

Head phone not working...

head phone not working after i update to yosemite , I tried with different headphones but it didn't work. I am able to control the volume with the head phone buttons.

Take each of the following steps that you haven't already tried.
1. If your model has an audio-out (headphone) port, and a red light is coming from it, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
2. From the menu bar, select
 ▹ System Preferences ▹ Sound ▹ Output
Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
3. Boot in safe mode. It will take much longer than usual. You don't have to log in; just reboot as usual when the login screen appears. Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
4. Reset the NVRAM.
5. Reset the SMC.
6. Reinstall OS X after backing up all data as a precaution. You won't need your backup unless something goes wrong.
7. Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed.

Report Column Heading Alignment - Center Not Working Correctly

I am using Apex 2.1 (XE) and now have an application with about 30 pages. I've noticed that some of my reports which have columns with a heading alignment of "center" are not always centering if they have columns that align to the left or right included before them. I looked at the generated HTML and it shows that align="LEFT" or align="RIGHT" is being generated in the source even when the column heading is set to center in the designer. It appears that if a field higher on the list says to align the column heading left or right, then that is what the following columns are going to do also if they are set to center. So column heading left and right works great, and center works only if all the columns are set to center.
My question: Is this a known bug? Is it something that can be scheduled for a fix at some point in the future?
Luckily the column data itself obeys the column alignment, so this is strictly a cosmetic problem with the column headings.
Thanks,
Jim

Hello,
What theme are you using?
Try setting them with a css decalration. Instead of align="right" put this is in the heading attribute
style="text-align:right;" or style="text-align:left;"
Carl

Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?

Hi,
   I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
      CLASS lcl_report DEFINITION
CLASS lcl_report DEFINITION.
PUBLIC SECTION.
    METHODS:
      display IMPORTING l_table TYPE string
                         l_fcat   TYPE string.
ENDCLASS.                    "lcl_report DEFINITION
      CLASS lcl_report IMPLEMENTATION
CLASS lcl_report IMPLEMENTATION.
METHOD display.
    DATA: gr_table   TYPE REF TO cl_salv_table.
    DATA: gr_columns TYPE REF TO cl_salv_columns_table,
          gr_column TYPE REF TO cl_salv_column_table,
          ls_fcat    TYPE slis_fieldcat_alv.
    DATA: gr_display TYPE REF TO cl_salv_display_settings.
    DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
          l_field    TYPE string.
    FIELD-SYMBOLS : <fs_table>    TYPE STANDARD TABLE,
                    <ft_fcat>     TYPE STANDARD TABLE.
Get the ALV object refering to the output table
    ASSIGN (l_table) TO <fs_table>.
    ASSIGN (l_fcat) TO <ft_fcat>.
    TRY.
        cl_salv_table=>factory(
          IMPORTING
            r_salv_table = gr_table
          CHANGING
            t_table      = <fs_table> ).
      CATCH cx_salv_msg.                                "#EC NO_HANDLER
    ENDTRY.
Add basic default functionality in the ALV report
Functions
    l_o_functions = gr_table->get_functions( ).
    l_o_functions->set_all( abap_true ).
    gr_columns = gr_table->get_columns( ).
    gr_columns->set_headers_visible( abap_true ).
Display the list
    gr_table->display( ).
ENDMETHOD.                    "extract
ENDCLASS.                    "lcl_report IMPLEMENTATION
*& start-of-selection declaration
START-OF-SELECTION.
PERFORM :
get store codes
    get_storecodes    USING      p_stfile
                      CHANGING   it_t001w,
fetching mard data
    read_mard_data,
preparing fieldcatalog for Final Data
    create_filedcat   USING      it_t001w
                                 it_site
                      CHANGING   it_fieldcat,
preparing structure & internal table for Final Data
    create_final_table_structure USING it_fieldcat,
prepare output data
    prepare_final_data.
*& end-of-selection declaration
END-OF-SELECTION.
PERFORM :
display data
    display_data    USING l_table
                          l_fcat.
*&      Form get_storecodes
FORM get_storecodes USING    p_p_stfile
                     CHANGING p_it_t001w LIKE it_t001w[].
DATA :
internal table for RAW
lt_raw    TYPE truxs_t_text_data,
rs_site   LIKE LINE OF rt_site,
l_index   LIKE sy-tabix.
FIELD-SYMBOLS :
field symbol for it_t001w
<fs_t001w>   LIKE LINE OF p_it_t001w.
calling function module to get Stores Data from File
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
      i_line_header        = 'X'
      i_tab_raw_data       = lt_raw
      i_filename           = p_p_stfile
    TABLES
      i_tab_converted_data = p_it_t001w[]
    EXCEPTIONS
      conversion_failed    = 1
      OTHERS               = 2.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
SORT p_it_t001w BY werks.
CLEAR rs_site.
rs_site-sign   = 'I'.
rs_site-option = 'EQ'.
rs_site-low    = p_dccode.
APPEND rs_site TO rt_site.
IF it_t001w[] IS NOT INITIAL.
    LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
      l_index   = sy-tabix.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input = <fs_t001w>-werks
        IMPORTING
          output = <fs_t001w>-werks.
      MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
      IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
      append site to ranges
        CLEAR rs_site.
        rs_site-sign   = 'I'.
        rs_site-option = 'EQ'.
        rs_site-low    = <fs_t001w>-werks.
        APPEND rs_site TO rt_site.
        CONTINUE.
      ENDIF.
    ENDLOOP.
    SORT p_it_t001w BY werks.
    SORT rt_site.
ENDIF.
ENDFORM.                    " get_storecodes
*&      Form create_final_table_structure
FORM create_filedcat   USING    p_it_t001w      LIKE it_t001w[]
                                p_it_site       LIKE it_site[]
                       CHANGING p_it_fieldcat   LIKE it_fieldcat[].
FIELD-SYMBOLS :
field symbol for p_it_t001w
<fs_t001w>     LIKE LINE OF p_it_t001w,
field symbol for p_it_site
<fs_site>      LIKE LINE OF p_it_site.
DATA :
fieldname
l_fieldname    TYPE slis_fieldname,
workarea for site ranges
rs_site        LIKE LINE OF rt_site.
CLEAR : l_fieldname, rs_site.
l_fieldname    = p_dccode.
PERFORM
prepare fieldcatalog
build_fieldcatalog USING :   'MTART'      'CHAR'        '5' ,
                               'MTBEZ'      'CHAR'        '25' ,
                               'MATKL'      'CHAR'        '6' ,
                               'WGBEZ'      'CHAR'        '20' ,
                               'MATNR'      'CHAR'        '18' ,
                               'MAKTX'      'CHAR'        '30' ,
                                l_fieldname 'CHAR'        '17' .
create header for excel
PERFORM create_excel_header USING : 'Division',
                                       'Divsion Description',
                                       'MC Code',
                                       'MC Description',
                                       'Article',
                                       'Article Description',
                                        l_fieldname.
loop for creating fieldcatalog
LOOP AT it_site ASSIGNING <fs_site>.
    READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
                                                              BINARY SEARCH.
    IF sy-subrc = 0           AND <fs_t001w> IS ASSIGNED AND
       <fs_site> IS ASSIGNED AND <fs_site>-stock GT 0.
      CLEAR : l_fieldname, rs_site.
      l_fieldname    = <fs_site>-werks.
    prepare fieldcatalog
      PERFORM build_fieldcatalog USING : l_fieldname    'CHAR'   '17'.
    create header for excel
      PERFORM create_excel_header USING l_fieldname .
      CONTINUE.
    ENDIF.
ENDLOOP.
l_fcat = 'it_fieldcat[]'.
ENDFORM.                    " create_final_table_structure
*&      Form build_fieldcatalog
FORM build_fieldcatalog USING    p_fieldname      TYPE slis_fieldname
                                  p_datatype       TYPE datatype_d
                                  p_length         TYPE intlen.
DATA : ls_fieldcat    LIKE LINE OF it_fieldcat.
CLEAR : ls_fieldcat.
ls_fieldcat-fieldname   = p_fieldname.
ls_fieldcat-datatype    = p_datatype.
ls_fieldcat-intlen      = p_length.
APPEND ls_fieldcat TO it_fieldcat.
ENDFORM.                    " build_fieldcatalog
*&      Form create_final_table_structure
FORM create_final_table_structure USING    p_it_fieldcat.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fieldcat
    IMPORTING
      ep_table        = t_table.
ASSIGN t_table->* TO <ft_final>.
ENDFORM.                    " create_final_table_structure
*&      Form create_excel_header
FORM create_excel_header USING    p_p_fieldname.
DATA : ls_header LIKE LINE OF it_header.
CLEAR ls_header.
ls_header-col_name = p_p_fieldname.
APPEND ls_header TO it_header.
ENDFORM.                    " create_excel_header
*&      Form prepare_final_data
FORM prepare_final_data .
DATA          : l_matnr       LIKE g_matnr,
                  l_werks       LIKE g_werks,
                  l_index       LIKE sy-tabix.
FIELD-SYMBOLS : <fs_mard>     LIKE LINE OF it_mard.
Getting No. of Lines in IT_MARD internal table
DESCRIBE TABLE it_mard LINES g_lines.
LOOP AT it_mard ASSIGNING <fs_mard>.
    l_index    = sy-tabix.
    IF l_matnr IS INITIAL.
      l_matnr = <fs_mard>-matnr.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      UNASSIGN : <fs_value>, <fs_final>.
    Create dynamic work area and assign to FS
      CREATE DATA t_line LIKE LINE OF <ft_final>.
      ASSIGN t_line->*   TO <fs_final>.
      ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_mard>-matnr.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    getting Article Type,MC & its Descriptions
      PERFORM get_other_data    USING     l_matnr
                                          l_werks.
    ELSEIF l_matnr <> <fs_mard>-matnr.
      APPEND <fs_final> TO <ft_final>.
      CLEAR l_matnr.
      l_matnr = <fs_mard>-matnr.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      UNASSIGN : <fs_value>, <fs_final>.
    Create dynamic work area and assign to FS
      CREATE DATA t_line LIKE LINE OF <ft_final>.
      ASSIGN t_line->*   TO <fs_final>.
      ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_mard>-matnr.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    getting Article Type,MC & its Descriptions
      PERFORM get_other_data    USING     l_matnr
                                         l_werks.
    ELSE.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    ENDIF.
    IF l_index = g_lines.
      APPEND <fs_final> TO <ft_final>.
    ENDIF.
ENDLOOP.
l_table = '<ft_final>[]'.
ENDFORM.                    " prepare_final_data
*&      Form get_other_data
FORM get_other_data USING    p_l_matnr
                              p_l_werks.
FIELD-SYMBOLS : <fs_mara>     LIKE LINE OF it_mara,
                  <fs_t023t>    LIKE LINE OF it_t023t,
                  <fs_t134t>    LIKE LINE OF it_t134t,
                  <fs_makt>     LIKE LINE OF it_makt.
READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr.   " BINARY SEARCH.
IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
    ASSIGN COMPONENT 'MTART' OF STRUCTURE <fs_final> TO <fs_value>.
    <fs_value>        = <fs_mara>-mtart.
    ASSIGN COMPONENT 'MATKL' OF STRUCTURE <fs_final> TO <fs_value>.
    <fs_value>        = <fs_mara>-matkl.
    READ TABLE it_makt ASSIGNING <fs_makt> WITH KEY matnr = <fs_mara>-matnr   BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
      ASSIGN COMPONENT 'MAKTX' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_makt>-maktx.
    ENDIF.
    READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
      ASSIGN COMPONENT 'WGBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>      = <fs_t023t>-wgbez.
    ENDIF.
    READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
      ASSIGN COMPONENT 'MTBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>      = <fs_t134t>-mtbez.
    ENDIF.
ENDIF.
ENDFORM.                    " get_other_data
*&      Form display_data
      text
FORM display_data USING    p_l_table
                            p_l_fcat.
DATA:
Variable for Object Creation
o_report TYPE REF TO lcl_report.
CREATE OBJECT o_report.
o_report->display( EXPORTING l_table = p_l_table
                               l_fcat = p_l_fcat ).
ENDFORM.                    " display_data

I don't know how to read the code you pasted or I would have checked this myself.
Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
I made a method inside my local class to add the names:
        call method set_colname
          EXPORTING iv_tab = alv_tab
                    iv_colid = 'xxxx' "fieldname from the table
                    iv_stxt = text-t54
                    iv_mtxt = text-t55
                    iv_ltxt = text-t55.
METHOD set_colname .
data:
          alv_cols type REF TO cl_salv_columns_table,
          alv_col type REF TO cl_salv_column.
TRY .
*... Change fieldnames
        call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
        call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
        IF iv_stxt <> ''.
          CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
        ENDIF.
        IF iv_mtxt <> ''.
          CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
        ENDIF.
        IF iv_ltxt <> ''.
          CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
        ENDIF.
   CATCH cx_salv_not_found.
ENDTRY.
ENDMETHOD. "set_colname

IR column Header value not displayed entirely during filteration

I have a IR, when I click any column Header and it shows the list of values as a dropdown.
some of them (which are larger) get cut off.. means the the entire content/value are not displayed within the dropdown. [width of dropdown is fixed and no of characters in the content/value is more..]
how can we fix this?
Also.. is there any we can increase the width of the Select List window when we click any column header in IR.
Thanks,
Deepak
Edited by: DeepakJ on Sep 15, 2011 4:08 PM

Hi,
jQuery is not included to Apex 3.2 by default.
If you have not include jQuery library's to e.g. your page template or page header, then it is not "installed".
You can run your app and inspect HTML source to be sure.
You can download jQuery and jQuery UI and place files to your HTTP server folder. Then load those in e.g. page template header.
Or use jQuery files from Google by placing to page template header.
<link type="text/css" rel="stylesheet" href="//ajax.googleapis.com/ajax/libs/jqueryui/1.8.16/themes/redmond/jquery-ui.css" />
<script type="text/javascript" src="//ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.min.js"></script>
<script type="text/javascript" src="//ajax.googleapis.com/ajax/libs/jqueryui/1.8.16/jquery-ui.min.js"></script>Regards,
Jari

Column header filtering not functioning for external lists

I have a problem with column header filtering on external lists, specific for columns of Number and Date types.
When the site's regional settings are in English (United States) filtering works fine, but if I choose any other regional setting with different number formatting (ie Dutch) then filtering on these columns gives no results.
When clicking on the column header filter dropdown, the numbers to filter on are displayed with thousands seperators where the numbers in the views are not formatted as seen in attached screenshot.
Filtering on custom sharepoint list with these regional settings is working fine, it is just on external lists, on number and date fields and regional setting is not English.
I have tried all different kind of regional settings on the client and the server, but no results.
Anybody has a clue?
Clicking on the column header shows all available filter values (with thousand seperator). Selecting one value gives no results:
No results after selecting a filter value

Hi,
According to your post, my understanding is that you had an issue about column filter in external list.
We can use the SharePoint Manager to change the column type to “single line of text”, then you would filter column in the external list.
There is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/en-US/fe67d581-6e7b-4770-b296-8ec0f9b5b769/not-able-to-filter-or-sort-by-list-column-headers-for-external-data-fields-ideas?forum=sharepointgeneralprevious
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Column heading is not coming while generating a .csv file from .sql file

Hi all,
Now since I am able to generate a .csv file by executing my .sql file, the column heading is missing in that. Please advise. I have used the following parameters in my query:
set linesize 1000
set colsep ','
set echo off
set feedback off
set pagesize 0
set trimspool on
spool /path/file.csv
select ...... from .... where .....;
spool off
exit

set pagesize 0 <-- your problem
you must set it into a high value (max value 50000)
see:
SQL> select * from dual;
D
X
SQL> set pagesize 0
SQL> select * from dual;
X
SQL> set pagesize 50000
SQL> select * from dual;
D
X

Images in some Column-Heads are not visible

Hi there,
in an Webdynpro-Application I am using tables that are sorted in that way that is discribed in the Tables-Tutorial (with TableSort-Class). Everything works fine except that initially there is no image in the column-head although I set one in the layout-designer. After sorting the apropriate images appear.
I tried to set the image-source again, I tried to set the image in the source like:
<i>IWDTable table = (IWDTable)view. ...
table.getColumns()[...].getHeader().setImageSource("...");</i>
... doesn't work.
Are there solutions? Thanks!<i></i>

Hi,
Your code is right. but i think you have placed the setImageSource code before the call of Table Sorter class.
if you put that code after the object creation of TableSorter class, it will work.
regards
Karthik

Currency format and Right Align not working for messagetext in HGrid

Hi
We are dynamically enabling MessageTextinput inside HGrid region, it is Number type and when we set readonly to True it become left align, and currency format also not working, I tried the below various options but nothing is working.
Option : 1
OAMessageTextInputBean attribute = (OAMessageTextInputBean)webBean.findChildRecursive("Attribute"+i);
attribute.setCurrencyCode("USD");
Option :2
OAWebBean amountDueBean2 = webBean.findChildRecursive("Attribute"+i);
oracle.cabo.ui.validate.Formatter formatter2 = new OADecimalValidater("#,##0.00;(#,##0.00)","#,##0.00;(#,##0.00)");
amountDueBean2.setAttributeValue(ON_SUBMIT_VALIDATER_ATTR, formatter2);
etc options we tried
amountDueBean2.setAttributeValue(CURRENCY_CODE,formatter2);
amountDueBean2.setAttributeValue(OAWebBeanConstants.CURRENCY_CODE,"USD" );
Please help on this issue.
We are using Jdeveloper 10.1.3.3.0.3
TiA
Babu

Anatoli,
Hello!
I don't know if my situation is the same as yours, but after a lot of head-scratching, forum searching and template rebuilding, I finally figured out my problem.
I had one column that no matter what I did kept appearing in Excel as text. I'd format it to Number in Excel and nothing. When trying to sum the column, Excel would not recognize any of the values as numbers. I even did the reformatting on the XML Word template to number, and the currency format that Adam mentions. Still no go. The $ and ',' appeared, but column still formatted as string.
I just finally noticed Adam's mention of the 2 extra spaces at the end of the numbers and sure enough mine was doing the same thing. Take out the 2 spaces and voila! Number!
Every time I redid my template in Word (07 and 03), I used the wizard. (Add-ins>Insert>Table>Wizard) walked through the steps, not really changing anything. Then I would preview and the spaces would be there. The column that I was having problems with was the last column of the table, which would get the text 'end G_ASSIGNED_CC' inserted in after the field name - separated by 2 spaces. Once I took out these two spaces, so the column now shows 'COSTend G_ASSIGNED_CC', it worked fine in Excel - all numbers.
Hope that helps someone out there as I was having a heck of a time finding anything (solutions anyway) on this.
Thanks,
Janel

Links in template header to not work when page is in different folder

Hello
I have the following problem: In the header of the template, the links of the menu are written absolute not relative, i.e. http://www.nabilvoyage.com/html/tours.html (not ../html/tours.html). This header is embedded in a template. If I use this template for a html page which is not in the same main folder, the links do not work (see:http://www.nabilvoyage.com/swf/gallery1.html). Can someone please help? Thank you very much.
Sarosa
The template code is:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<META NAME="keywords" CONTENT="Morocco, Transportation, Agency, Transport, Travel, Holiday, Tours, Trips, Morocco Festivals, Morocco Maps, Morocco History, Casablanca, Marrakech, Sahara">
<META NAME="description" CONTENT="Specialized Moroccan Transport Agency offers a variety of trips all over Morocco, wepages offers, Prices, Information about Moroccan History, Morocco Map, Morocco Festival Calendar etc.">

<title>Morocco Ouarzazate Travel Agency - desert trips, excursions</title>

<style type="text/css">

</style>
<script src="../scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<script type="text/javascript">

</script>
<link rel=”shortcut icon” href=”http://www.nabilvoyage.com/favicon.ico” mce_href=”http://www.nabilvoyage.com/favicon.ico”/>

</head>
<body onload="MM_preloadImages('../pictures/about_down.jpg','../pictures/about_over.jpg','../pi ctures/tours_down.jpg','../pictures/tours_over.jpg','../pictures/photo_down.jpg','../pictu res/photo_over.jpg','../pictures/morocco_down.jpg','../pictures/morocco_over.jpg','../pict ures/links_down.jpg','../pictures/links_over.jpg','../pictures/contact_down.jpg','../pictu res/contact_over.jpg','../pictures/home_down.jpg','../pictures/home_over.jpg')">
<table width="878" align="center" cellpadding="0" cellspacing="0" bordercolor="#D4CBB9" class="table1body">
<tr bgcolor="#D4CBB9">
    <td width="872" height="90"><div align="center"><img src="../pictures/header.jpg" alt="nabil voyage header" width="870" height="90" class="headerpicpadding" /></div></td>
</tr>
<tr bgcolor="#D4CBB9">
    <td width="872" height="20"><div align="center">
      <table border="0" cellpadding="0" cellspacing="0">
        <tr>
          <td><table width="870" border="0" cellpadding="0" cellspacing="0">
            <tr>
              <td><table border="0" align="center" cellpadding="0" cellspacing="0">
                <tr>
                  <td><a href="http://www.nabilvoyage.com/html/home.html" target="_top" onclick="MM_nbGroup('down','group1','Home','../pictures/home_down.jpg',1)" onmouseover="MM_nbGroup('over','Home','../pictures/home_over.jpg','',1)" onmouseout="MM_nbGroup('out')"><img src="http://www.nabilvoyage.com/pictures/home.jpg" alt="Home button" name="Home" border="0" id="Home" onload="" /></a></td>
                    <td><a href="../../about.html" target="_top" onclick="MM_nbGroup('down','group1','About','../pictures/about_down.jpg',1)" onmouseover="MM_nbGroup('over','About','../pictures/about_over.jpg','',1)" onmouseout="MM_nbGroup('out')"><img src="http://www.nabilvoyage.com/pictures/about.jpg" alt="About button" name="About" border="0" id="About" onload="" /></a></td>
                    <td><a href="http://www.nabilvoyage.com/html/tours.html" target="_top" onclick="MM_nbGroup('down','group1','Tours','../pictures/tours_down.jpg',1)" onmouseover="MM_nbGroup('over','Tours','../pictures/tours_over.jpg','',1)" onmouseout="MM_nbGroup('out')"><img src="http://www.nabilvoyage.com/pictures/tours.jpg" alt="Tours button" name="Tours" border="0" id="Tours" onload="" /></a></td>
                    <td><a href="http://www.nabilvoyage.com/html/galleries.html" target="_top" onclick="MM_nbGroup('down','group1','Photogallery','../pictures/photo_down.jpg',1)" onmouseover="MM_nbGroup('over','Photogallery','../pictures/photo_over.jpg','',1)" onmouseout="MM_nbGroup('out')"><img src="http://www.nabilvoyage.com/pictures/photo.jpg" alt="Photo gallery button" name="Photogallery" border="0" id="Photogallery" onload="" /></a></td>
                    <td><a href="http://www.nabilvoyage.com/html/morocco.html" target="_top" onclick="MM_nbGroup('down','group1','Morocco','../pictures/morocco_down.jpg',1)" onmouseover="MM_nbGroup('over','Morocco','../pictures/morocco_over.jpg','',1)" onmouseout="MM_nbGroup('out')"><img src="http://www.nabilvoyage.com/pictures/morocco.jpg" alt="Morocco button" name="Morocco" border="0" id="Morocco" onload="" /></a></td>
                    <td><a href="http://www.nabilvoyage.com/html/links.html" target="_top" onclick="MM_nbGroup('down','group1','Links','../pictures/links_down.jpg',1)" onmouseover="MM_nbGroup('over','Links','../pictures/links_over.jpg','',1)" onmouseout="MM_nbGroup('out')"><img src="http://www.nabilvoyage.com/pictures/links.jpg" alt="Links button" name="Links" border="0" id="Links" onload="" /></a></td>
                    <td><a href="../html/contact.html" target="_top" onclick="MM_nbGroup('down','group1','Contact','../pictures/contact_down.jpg',1)" onmouseover="MM_nbGroup('over','Contact','../pictures/contact_over.jpg','',1)" onmouseout="MM_nbGroup('out')"><img src="http://www.nabilvoyage.com/pictures/contact.jpg" alt="Contact button" name="Contact" border="0" id="Contact" onload="" /></a></td>
                  </tr>
                </table>              </td>
              </tr>
            </table></td>
          </tr>
      </table>
    </div>      <div align="center"></div>     </td>
</tr>
<tr bgcolor="#D4CBB9" class="bottom_padding">
    <td height="280" align="center" bgcolor="#D4CBB9">
    </td>
</tr>
<tr class="bottom_padding">
    <td height="23"><table width="874" border="0" align="center" class="bottom_padding">
        <tr>
          <td height="20" bgcolor="#c0b2a1"><div align="center" class="bottom_padding"></div></td>
        </tr>
    </table></td>
</tr>
</table>
<p align="center"> <span class="style2">© Nabil Voyage 2009 - <a href="http://www.photo-emotions-morocco.com" target="_blank">Realisation Photo Emotions S.A.R.L</a></span><br />
</p>
</body>
</html>

Only you will know for sure what you are dealing with, but I do not see the same complete url code in the header of the page you say has a problem. I only see the page filename linked (not http:///www..., just home.html). It may be a case of those pages not using the same template.

11.1.1.5 - Column Heading Alignment not working

Similar Messages

Maybe you are looking for