11i-R12 upgrade: when to apply patch 8919489

I am performing an 11.5.10.2 -> R12.1.1 upgrade on Linux-x86 using the Maint Wizard (MW).
MOS ID 437878.1 says to apply patch 8919489 (R12.TXK.B.Delta.3) BEFORE applying the bundle forms patch 9593176 (and any missing patches) as part of the OAS 10.1.2.3 upgrade.
The MW has patch 8919489 being applied AFTER the OAS 10.1.2.3 upgrade patches (done in MOS 437878.1) and after the main 12.1.1 upgrade patch (u6678700.drv).
Does it matter when this patch is applied?
Thanks

I suppose that I should clarify.
- The MW says to follow MOS 437878.1 BEFORE starting the primary upgrade patch
- MOS 437878.1 says to apply patch 8919489 as a pre-req patch
- The MW says to apply patch 8919489 after the primary upgrade patch
So, is it to be applied along with the other 437878.1 patches or after the primary upgrade patch?
I don't know where MOS 437878.1 is referenced as part of the 11i-R12 upgrade outside of the MW.
Thanks

Similar Messages

  • When i apply patch 43worker occur afcmgf.odf error when apply patch 4334965

    when i apply patch 4334965, it occur error with: FAILED: file afcmgr.odf on worker 14 for product fnd username APPLSYS.
    then the others worker's status is wait, how to resolve? and how did i know what's wrong?

    Fadi,
    Thanks a lot for you information, it is very helpful.
    I am new to APPS, I did not know how to handle it last night
    Another question, if I initiate another session to adctl to restart the failed worker, will the adpatch resume automatically?
    Thanks,
    Hank

  • 11i-R12 upgrade and MOS 954704.1 (pre-upgrade

    I am performing the 11.5.10.2 -> R12.1.1 Upgrade using the Maint Wizard (v2.19) on Linux x86.
    I am at this step:
    Cat - Upg to Rel 12.1.1
    ProdFamily - Perform the Upgrade
    Task - Apply Preinstall Patches
    Step - Check for critical pre-upgrade patches for Financials
    Action - Follows MOS note 954704.1 to apply pre-upgrade patches
    I would like to know whether I need to use any special options/parameters to adpatch when applying these R12 patches.
    Thanks

    I don't understand. I haven't applied ANY R12 patches (except OAS 10.1.2.3) yet since I am still at a "pre-upgrade" step.
    So the R12 patch cannot be in AD_BUGS.
    The R12.AD.A.delta.4 patch is 6510214. Don't I need to know whether it is in the Rapid Install upgrade driver u6678700.drv?Sorry, I thought you are asking how to find if it is applied or not later after the upgrade.
    Just follow the same logic we did with Patch 6856840, search MOS for (R12.AD.A.DELTA.4, Patch 6510214) and you will get the list of patches that includes this patch (according to MOS website, I can see that this patch is only included in R12.AD.A.DELTA.6).
    Thanks,
    Hussein

  • R12 how to see applied patches list

    Heloo my friend;
    I wonder one thing... i am still searching the subject but maybe someone know it here.. I can see applied patches list in r11 from ad_applied_patches table and i can see which pathed i made to system..
    But in r12 when i select data from ad_applied_patches there are 3500 pathces in query but it doesnt possible for my system.
    Anyone can say me how i check my patches list in r12 system
    Thanks
    Helios

    Hi my friend
    While i query to my ad_bugs table in r12 there ar 307919 patches!! :)
    i found same document which is 139684.1...i try to understand sh script.. but the best way is seems OAM... for begiinner i wanna type what i do
    login system wiht sysadmin and then choose system administrator,in right side u will see under Oracle Application Manager top "Patching and Utilities" and u can see ur patches...
    This thread can close now..
    Ty for all replay my friend
    Helios

  • 11i to R12 upgrade : Unable to merge patch 9179588:R12.AD.B with 9477107:R12.AD.B and patch 7461070:R12.AD.B.1

    Hello Sir,
    As per readme for Patch 9179588, I am trying to merge patch (9179588:R12.AD.B) with 9477107:R12.AD.B and R12.AD.B.1
    (patch 7461070). When I run admrgpch without -admode option, admrgpch completes successfully.
    However, when I just add -admode option in same command, getting error that "invalid option -s". Please see below details and suggest since there is Note: This merge should be a full merge using -admode.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    drix10:/fmstop/patches/R1211AD/merge>ls -lrt
    total 13992
    -rw-r--r-- 1 appltest dba 7035668 Aug 03 10:59 p7461070_R12_AIX64-5L.zip
    -rw-r--r-- 1 appltest dba 79016 Aug 04 03:48 p9179588_R12.AD.B_R12_GENERIC.zip
    -rw-r--r-- 1 appltest dba 38579 Aug 04 05:22 p9477107_R12.AD.B_R12_GENERIC.zip
    -rw-r--r-- 1 appltest dba 94 Aug 04 13:27 manifest.txt
    drix10:/fmstop/patches/R1211AD/merge>cat manifest.txt
    p7461070_R12_AIX64-5L.zip
    p9179588_R12.AD.B_R12_GENERIC.zip
    p9477107_R12.AD.B_R12_GENERIC.zip
    drix10:/fmstop/patches/R1211AD/merge>
    drix10:/fmstop/patches/R1211AD/merge>admrgpch -admode -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt
    Error: Invalid option: -s
    usage: admrgpch -help
    admrgpch <source_directory> <destination_directory>
    admrgpch -s <source_directory> -d <destination_directory>
    [-verbose <level>] [-merge_name <pattern>]
    [-manifest <filename>] [-logfile <filename>]
    where
    * -help Print help message.
    * -verbose <level> Can be one of: { 0(SILENT),
    1(QUIET), 2(VERBOSE) or 3(LOUD) }
    Default - 1(QUIET).
    * -merge_name <pattern> The name of the merged patch (max 24 characters).
    Default - "merged".
    * -s <source_directory> Path of source directory where all patches to be
    merged have been unzipped.
    * -d <destination_directory> Path of destination directory where the merged
    patch will be created.
    * -manifest <filename> Full pathname of a file containing the list of
    patch zip files to be merged.
    * -logfile <filename> Admrgpch log file name.
    Default:"<CWD>/admrgpch.log".
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Without option -admode :
    drix10:/fmstop/patches/R1211AD/merge>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt
    unzipping p7461070_R12_AIX64-5L.zip..
    unzipping p9179588_R12.AD.B_R12_GENERIC.zip..
    unzipping p9477107_R12.AD.B_R12_GENERIC.zip..
    Executing the merge of the patch drivers
    -- Processing patch: /fmstop/patches/R1211AD/merge/7461070
    -- Done processing patch: /fmstop/patches/R1211AD/merge/7461070
    -- Processing patch: /fmstop/patches/R1211AD/merge/9179588
    -- Done processing patch: /fmstop/patches/R1211AD/merge/9179588
    -- Processing patch: /fmstop/patches/R1211AD/merge/9477107
    -- Done processing patch: /fmstop/patches/R1211AD/merge/9477107
    Copying files...
    5% complete. Copied 44 files of 876...
    10% complete. Copied 88 files of 876...
    15% complete. Copied 132 files of 876...
    20% complete. Copied 176 files of 876...
    25% complete. Copied 219 files of 876...
    30% complete. Copied 263 files of 876...
    35% complete. Copied 307 files of 876...
    40% complete. Copied 351 files of 876...
    45% complete. Copied 395 files of 876...
    50% complete. Copied 438 files of 876...
    55% complete. Copied 482 files of 876...
    60% complete. Copied 526 files of 876...
    65% complete. Copied 570 files of 876...
    70% complete. Copied 614 files of 876...
    75% complete. Copied 657 files of 876...
    80% complete. Copied 701 files of 876...
    85% complete. Copied 745 files of 876...
    90% complete. Copied 789 files of 876...
    95% complete. Copied 833 files of 876...
    100% complete. Copied 876 files of 876...
    Character-set converting files...
    3 unified drivers merged.
    Patch merge completed successfully
    Please check the log file at ./admrgpch.log.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    I am executing admrgpch after sourcing 11i environment and version for admrgpch is :
    drix10:/fmstop/fmstest/fmstestappl/ad/11.5.0/bin>adident Header admerge.pl
    admerge.pl:
    $Header admerge.pl 115.22 2008/09/18 12:12:08 nissubra noship $

    Hi Srini,
    Thanks a lot !
    Actually, I tried that one as well by running admrgpch from newly installed R12 code tree and I got below error.
    drix10:/fmstop/r12apps/apps/apps_st/appl/ad/12.0.0/bin>ls -rlt admrgpch
    -rwxr-xr-x    1 appltest dba        14293576 Mar 30 2009  admrgpch
    drix10:/fmstop/r12apps/apps/apps_st/appl/ad/12.0.0/bin>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt -admode
    exec(): 0509-036 Cannot load program ./admrgpch because of the following errors:
            0509-150   Dependent module libnnz10.so could not be loaded.
            0509-022 Cannot load module libnnz10.so.
            0509-026 System error: A file or directory in the path name does not exist.
    Then I sourced R12 environment file and ran same command. Its completed successfully.
    drix10:/fmstop/patches/R1211AD/merge>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt -admode
    unzipping p7461070_R12_AIX64-5L.zip..
    unzipping p9179588_R12.AD.B_R12_GENERIC.zip..
    unzipping p9477107_R12.AD.B_R12_GENERIC.zip..
    Executing the merge of the patch drivers
    -- Processing patch: /fmstop/patches/R1211AD/merge/7461070
    -- Processing file: /fmstop/patches/R1211AD/merge/7461070/u7461070.drv
    -- Done processing file: /fmstop/patches/R1211AD/merge/7461070/u7461070.drv
    -- Done processing patch: /fmstop/patches/R1211AD/merge/7461070
    -- Processing patch: /fmstop/patches/R1211AD/merge/9179588
    -- Processing file: /fmstop/patches/R1211AD/merge/9179588/u9179588.drv
    -- Done processing file: /fmstop/patches/R1211AD/merge/9179588/u9179588.drv
    -- Done processing patch: /fmstop/patches/R1211AD/merge/9179588
    -- Processing patch: /fmstop/patches/R1211AD/merge/9477107
    -- Processing file: /fmstop/patches/R1211AD/merge/9477107/u9477107.drv
    -- Done processing file: /fmstop/patches/R1211AD/merge/9477107/u9477107.drv
    -- Done processing patch: /fmstop/patches/R1211AD/merge/9477107
    Copying files...
    5% complete. Copied 45 files of 883...
    10% complete. Copied 89 files of 883...
    15% complete. Copied 133 files of 883...
    20% complete. Copied 177 files of 883...
    25% complete. Copied 221 files of 883...
    30% complete. Copied 265 files of 883...
    35% complete. Copied 310 files of 883...
    40% complete. Copied 354 files of 883...
    45% complete. Copied 398 files of 883...
    50% complete. Copied 442 files of 883...
    55% complete. Copied 486 files of 883...
    60% complete. Copied 530 files of 883...
    65% complete. Copied 574 files of 883...
    70% complete. Copied 619 files of 883...
    75% complete. Copied 663 files of 883...
    80% complete. Copied 707 files of 883...
    85% complete. Copied 751 files of 883...
    90% complete. Copied 795 files of 883...
    95% complete. Copied 839 files of 883...
    100% complete. Copied 883 files of 883...
    Character-set converting files...
      3 unified drivers merged.
    Patch merge completed successfully
    Please check the log file at ./admrgpch.log.

  • I have a problem when I apply patch 12539000

    Hi all,
    I need to upgrade my GI and RDBMS from 11.2.0.2 to 11.2.0.3 on Linux RedHat
    I am following this DOC: Oracle® Grid Infrastructure Installation Guide (E22489-04) - (F - How to Upgrade to Oracle Grid Infrastructure 11g Release 2).
    When I run Cluster Verification Utility (CVU), I got this fail:
    Check for Oracle patch "12539000" in home "/u01/app/11.2.0/grid" failed
    Check failed on nodes:
    brlouls011646,brlouls011645
    Then I am trying to install this patch, I download patch 12539000, Unzip patch 12539000 in a stage area, and then I got this error
    *$ sudo su -*
    *[sudo] password for oracle:*
    */u01/app/11.2.0/grid/OPatch/opatch auto /u01/oradisk/prerequisite_for_11.2.0.3/12539000*
    Executing /usr/bin/perl /u01/app/11.2.0/grid/OPatch/crs/patch112.pl -patchdir /u01/oradisk/prerequisite_for_11.2.0.3 -patchn 12539000 -paramfile /u01/app/11.2.0/grid/crs/install/crsconfig_params
    opatch auto log file location is /u01/app/11.2.0/grid/OPatch/crs/../../cfgtoollogs/opatchauto2012-04-27_07-44-31.log
    Detected Oracle Clusterware install
    Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
    OPatch  is bundled with OCM, Enter the absolute OCM response file path:
    Invalid response file path, To regenerate an OCM response file run /u01/app/11.2.0/grid/OPatch/ocm/bin/emocmrsp
    Please, anybody can help me?
    Thanks in advance.
    Leonardo.

    I stoped clusterware on node 1
    [root@brlouls011645 bin]# /u01/app/11.2.0/grid/bin/crsctl stop crs
    And I got another error:
    *[grid@brlouls011645 13343424]$ opatch apply*
    Oracle Interim Patch Installer version 11.2.0.3.0
    Copyright (c) 2012, Oracle Corporation. All rights reserved.
    Oracle Home : /u01/app/11.2.0/grid
    Central Inventory : /u01/app/oraInventory
    from : /u01/app/11.2.0/grid/oraInst.loc
    OPatch version : 11.2.0.3.0
    OUI version : 11.2.0.2.0
    Log file location : /u01/app/11.2.0/grid/cfgtoollogs/opatch/13343424_May_02_2012_09_05_25/apply2012-05-02_09-05-25AM_1.log
    Applying interim patch '13343424' to OH '/u01/app/11.2.0/grid'
    Verifying environment and performing prerequisite checks...
    Patch 13343424: Optional component(s) missing : [ oracle.sysman.console.db, 11.2.0.2.0 ] , [ oracle.sysman.oms.core, 10.2.0.4.3 ] , [ oracle.rdbms.dv, 11.2.0.2.0 ] , [ oracle.sysman.plugin.db.main.repository, 11.2.0.2.0 ] , [ oracle.network.cman, 11.2.0.2.0 ]
    All checks passed.
    This node is part of an Oracle Real Application Cluster.
    Remote nodes: 'brlouls011646'
    Local node: 'brlouls011645'
    Please shutdown Oracle instances running out of this ORACLE_HOME on the local system.
    (Oracle Home = '/u01/app/11.2.0/grid')
    Is the local system ready for patching? y
    y
    User Responded with: Y
    Backing up files...
    Patching component oracle.rdbms.rsf, 11.2.0.2.0...
    Patching component oracle.rdbms, 11.2.0.2.0...
    Patching component oracle.ldap.rsf, 11.2.0.2.0...
    Patching component oracle.rdbms.dbscripts, 11.2.0.2.0...
    Patching component oracle.rdbms.rman, 11.2.0.2.0...
    Patching component oracle.sdo.locator, 11.2.0.2.0...
    Patching component oracle.network.rsf, 11.2.0.2.0...
    The following actions have failed:
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libgeneric11.a/kgl2.o to /u01/app/11.2.0/grid/lib/libgeneric11.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libcommon11.a/kpccap.o to /u01/app/11.2.0/grid/lib/libcommon11.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libpls11.a/pef.o to /u01/app/11.2.0/grid/lib/libpls11.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libpls11_pic.a/pef_pic.o to /u01/app/11.2.0/grid/lib/libpls11_pic.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libserver11.a/kfc.o to /u01/app/11.2.0/grid/lib/libserver11.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libasmclnt11.a/kgfdputl.o to /u01/app/11.2.0/grid/lib/libasmclnt11.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libasmclntsh11.a/kgfdputl.o to /u01/app/11.2.0/grid/lib/libasmclntsh11.a... ''
    onewaycopyAction::apply(): cannot mkdirs on parent directory /u01/app/11.2.0/grid/psu/11.2.0.2.5
    onewaycopyAction::apply(): cannot mkdirs on parent directory /u01/app/11.2.0/grid/psu/11.2.0.2.5
    onewaycopyAction::apply(): cannot mkdirs on parent directory /u01/app/11.2.0/grid/cpu/scripts
    onewaycopyAction::apply(): cannot mkdirs on parent directory /u01/app/11.2.0/grid/cpu/scripts
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libnnz11.a/nzos.o to /u01/app/11.2.0/grid/lib/libnnz11.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libztkg11.a/accept_sec_context.o to /u01/app/11.2.0/grid/lib/libztkg11.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libzt11.a/nzdacval.o to /u01/app/11.2.0/grid/lib/libzt11.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libordsdo11.a/mdidx.o to /u01/app/11.2.0/grid/lib/libordsdo11.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libnro11.a/ncrfidr.o to /u01/app/11.2.0/grid/lib/libnro11.a... ''
    *Do you want to proceed? y*
    n
    User Responded with: N
    OPatch failed: ApplySession failed in system modification phase... 'ApplySession::apply failed: Archive not applied /u01/app/grid/stage/13343424/files/lib/libgeneric11.a/kgl2.o to /u01/app/11.2.0/grid/lib/libgeneric11.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libcommon11.a/kpccap.o to /u01/app/11.2.0/grid/lib/libcommon11.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libpls11.a/pef.o to /u01/app/11.2.0/grid/lib/libpls11.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libpls11_pic.a/pef_pic.o to /u01/app/11.2.0/grid/lib/libpls11_pic.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libserver11.a/kfc.o to /u01/app/11.2.0/grid/lib/libserver11.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libasmclnt11.a/kgfdputl.o to /u01/app/11.2.0/grid/lib/libasmclnt11.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libasmclntsh11.a/kgfdputl.o to /u01/app/11.2.0/grid/lib/libasmclntsh11.a... ''
    onewaycopyAction::apply(): cannot mkdirs on parent directory /u01/app/11.2.0/grid/psu/11.2.0.2.5
    onewaycopyAction::apply(): cannot mkdirs on parent directory /u01/app/11.2.0/grid/psu/11.2.0.2.5
    onewaycopyAction::apply(): cannot mkdirs on parent directory /u01/app/11.2.0/grid/cpu/scripts
    onewaycopyAction::apply(): cannot mkdirs on parent directory /u01/app/11.2.0/grid/cpu/scripts
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libnnz11.a/nzos.o to /u01/app/11.2.0/grid/lib/libnnz11.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libztkg11.a/accept_sec_context.o to /u01/app/11.2.0/grid/lib/libztkg11.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libzt11.a/nzdacval.o to /u01/app/11.2.0/grid/lib/libzt11.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libordsdo11.a/mdidx.o to /u01/app/11.2.0/grid/lib/libordsdo11.a... ''
    Archive not applied /u01/app/grid/stage/13343424/files/lib/libnro11.a/ncrfidr.o to /u01/app/11.2.0/grid/lib/libnro11.a... ''
    OPatch will attempt to restore the system...
    Restoring the Oracle Home...
    Checking if OPatch needs to invoke 'make' to restore some binaries...
    OPatch was able to restore your system. Look at log file and timestamp of each file to make sure your system is in the state prior to applying the patch.
    Log file location: /u01/app/11.2.0/grid/cfgtoollogs/opatch/13343424_May_02_2012_09_05_25/apply2012-05-02_09-05-25AM_1.log
    OPatch failed with error code 107

  • How to check whether a patch is applied or not when we apply a patch using patch.sh in oracle apps 11i

    Hi,
    If we apply patch using adpatch,we can know whether the patch is applied or not by checking ad_bugs,even with opatch we can check by using opatch lsinventory...
    But when we apply patch with patch.sh then how can we find out whether a patch is applied or not.
    I have to apply patch 14615390 and  16414360...but how can i know whether those patches are already applied or not. We have jre upgrade so we need to find out whether these patches or already applied or not.
    Thanks in advance,

    These are patches for Forms aren't they?
    I think this has been addressed before
    How to know if a patch has been applied to Forms?
    As the mighty Hussein points out in that post, refer to How to verify if a patch has been installed (Doc ID 105158.1)
    DA

  • Error while applying patch u4440000.drv(part of R12 upgrade from 11.5.10.2)

    Hi All,
    Getting error while applying patch 4440000
    cd $AU_TOP/patch/115/driver/u4440000.drv
    ERROR:
    Failed: XDOLoader.class on worker 1
    Failed: CustMigrationTool.class on worker 2
    Failed: XDOLoader.class on worker 3
    Failed: XDOLoader.class on worker 4
    Worker 2 log file:*
    Start time for file is: Tue Jun 23 2009 00:14:02
    adjava -ms128m -mx256m -nojit oracle.jrad.migration.cust.CustMigrationTool ak % -customer_cust -username &un_apps @ -password &pw_apps -dbconnection &jdbc_db_addr -jrad_username &un_apps @ -jrad_password &pw_apps -jrad_dbconnection &jdbc_db_addr -rootpackage "/oracle/apps/ak/" -migrationdir &fullpath_ak_mds_directory
    Copyright (c) 2002 Oracle Corporation
    Redwood Shores, California, USA
    AD Java
    Version 12.0.0
    NOTE: You may not use this utility for custom development
    unless you have written permission from Oracle Corporation.
    Reading product information from file...
    Reading language and territory information from file...
    Reading language information from applUS.txt ...
    Temporarily resetting CLASSPATH to:
    "/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
    Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
    Exception in thread "main" java.lang.NoClassDefFoundError: oracle/jrad/migration/cust/CustMigrationTool
    AD Worker error:
    The above program failed. See the error messages listed
    above, if any, or see the log and output files for the program.
    Worker 1 log file:_
    Start time for file is: Tue Jun 23 2009 00:14:02
    adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHL_RA_ANZ_PRC_PLN_DAY -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLRAT3.rtf
    Copyright (c) 2002 Oracle Corporation
    Redwood Shores, California, USA
    AD Java
    Version 12.0.0
    NOTE: You may not use this utility for custom development
    unless you have written permission from Oracle Corporation.
    Reading product information from file...
    Reading language and territory information from file...
    Reading language information from applUS.txt ...
    Temporarily resetting CLASSPATH to:
    "/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
    Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
    Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
    AD Worker error:
    The above program failed. See the error messages listed
    above, if any, or see the log and output files for the program.
    Time when worker failed: Tue Jun 23 2009 00:14:03
    Worker 3 log file:*
    Start time for file is: Tue Jun 23 2009 00:14:02
    adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHL_RA_ANZ_PRC_PLN_SUMM -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLRAT4.rtf
    Copyright (c) 2002 Oracle Corporation
    Redwood Shores, California, USA
    AD Java
    Version 12.0.0
    NOTE: You may not use this utility for custom development
    unless you have written permission from Oracle Corporation.
    Reading product information from file...
    Reading language and territory information from file...
    Reading language information from applUS.txt ...
    Temporarily resetting CLASSPATH to:
    "/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
    Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
    Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
    AD Worker error:
    The above program failed. See the error messages listed
    above, if any, or see the log and output files for the program.
    Time when worker failed: Tue Jun 23 2009 00:14:03
    Worker 4 log file:_
    Start time for file is: Tue Jun 23 2009 00:14:01
    adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHLPRDWC -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLPRDWC1.rtf
    Copyright (c) 2002 Oracle Corporation
    Redwood Shores, California, USA
    AD Java
    Version 12.0.0
    NOTE: You may not use this utility for custom development
    unless you have written permission from Oracle Corporation.
    Reading product information from file...
    Reading language and territory information from file...
    Reading language information from applUS.txt ...
    Temporarily resetting CLASSPATH to:
    "/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
    Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
    Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
    AD Worker error:
    The above program failed. See the error messages listed
    above, if any, or see the log and output files for the program.
    Time when worker failed: Tue Jun 23 2009 00:14:02
    Please let me know any solution
    Thanks in advance
    Regards,
    Bhanu Chander.

    Hi,
    As a part of R12 upgrade.
    once The Installation creates APPL_TOP, COMMON_TOP, INST_TOP and 10g Oracle Home
    Now we are connected to R12 application.
    Applied patch AD.A 4502962.
    Run the American English upgrade patch driver
    cd $AU_TOP/patch/115/driver
    adpatch options=nocopyportion,nogenerateportion
    Please enter the name of your AutoPatch driver file: u4440000.drv
    This patch doesn't have readme it will be under cd $AU_TOP/patch/115/driver
    Thanks,
    Bhanu Chander

  • 11i to r12 upgrade patch

    Hi
    I applied patch 6678700 during upgradation process. while patching some workers failed to complete so i skipped those jobs and continued . now patch completed successfully.
    I need to solve the failed jobs what i skipped while patching . How do i restart those failed jobs . Now patch completed so we cant use adctrl.
    This patch runs around 24 hours so i cant rerun the patch again.
    Tell me some ideas please
    These are the jobs failed. I found this from log file.
    igitrigs.sql
    lnsclu.ldt
    ceitaregpk.sql
    m4rpoco.wft
    GMDQSVRS.wft
    IGFAPW03.wft
    IGSPVW2CC.wft
    OKLSTLAT.wft
    pa115v.ldt
    wshwftrx.wft
    XDOLoader.class
    pephnasd.sql
    fiidbieeararsg.ldt
    aptoltax.sql
    aptppupg.sql
    jaiapinvsrc.sql
    jaiinvorigdff.sql
    jaircvdff.sql
    apilnupg.sql
    ceceismt.sql
    apinvwtu.sql
    adsstats.sql
    b6050423.sql
    jaiinstchktabcr.sql
    jtf_diagnostic_report_s.xdf
    JMF_GTA_IMPORT_REP_TEMP.xdf
    jljcf.odf
    csfsdogmwom.sql----error
    PO_VENDOR_CONTACTS_OBS_N4.xdf
    PO_VENDORS_OBS_F1.xdf
    csdvints.pls
    Thanks
    DBA - Newbie

    1005175 wrote:
    One of the failed worker log is this:
    sqlplus -s APPS/***** @/oracle/test12/apps/apps_st/appl/ap/12.0.0/patch/115/sql/aptoltax.sql &un_ap &batchsize 37 40
    Updating the total tax amount in the header
    DECLARE
    ERROR at line 1:
    ORA-20001: Updating column total_tax_amount : ORA-04098: trigger
    'APPS.OIE_UPDATE_EXP_STATUS' is invalid and failed re-validation
    ORA-06512: at line 155
    Thanks
    DBA-Newbie
    Please see (Patch 7303030 worker fails on aptppupg.sql (Invalid Trigger OIE_UPDATE_EXP_STATUS) [ID 1151006.1]).
    Thanks,
    Hussein

  • 11i to R12 upgrade

    Hi,
    I am doing test upgrade 11.5.10.2 to 12.1.1
    I am following R12 upgrade guide and 1211 install guide. I finished rapid install step "Creating the Upgrade File System". Now my next step is to perform upgrade (apply upgrade drivers).
    It is not clear in the documents and patch readme if I need to apply patches to 11i APPL_TOP or newly created R12 file system. Can somebody help me?
    Thanks.

    Which document says I need to apply only database driver? So far I have reviewed upgrade guide Part No. E14010-01.In the Same upgrade guide part NO:E14010-01 check the page no:73 it given as follows:
    Under Section 3 "Upgrading to Release 12.1.1"
    10. Run the American English upgrade patch driver (required)
    Applies to 11i release level: All
    TUMS step key: N/A
    To bring your database to the full Oracle Applications Release 12.1.1 level, use AutoPatch to run the (American English) unified driver (u6678700.drv). It is located in $AU_TOP/patch/115/driver.
    Run the driver on the administration server node on your Release 12.1.1 APPL_TOP
    using the following commands:
    $ adpatch options=nocopyportion,nogenerateportion
    Do I need to start database in new R12 file system.Yes. All the steps mentioned under Section 3.9 onwards need to perform in the new 12.1 Oracle _home
    -Rk
    Edited by: rkthanga on Jul 2, 2010 1:00 PM

  • 11i to R12 upgrade preparation and guidance after multiple errors

    This seems like a nice place to get some help. The MOS help I have received so far hasn't been so great.
    I am trying to figure out how to proceed from where I am right now. Here's what I have:
    Project: 11.5.10.2 upgrade to R12
    1) Successfully installed MW version 2.18 and completed the 1st four steps under the "Configuration" category (I have not yet laid down the R12 code tree)
    - Tried step "1.6-Apply patch 7429271" and it failed:
    --- The script being run is "get_from_url_1703_7429271.sh".
    --- When running the script manually this error occurs:
    --- "Exception in thread "main" java.lang.NoClassDefFoundError: oracle/support/mw/AruExecutor"
    Needless to say it cannot download the patch.
    2) I thought that I might install the LivePatch release 2.19 patch (12728371)
    - I tried to install this patch using the "auto-install" method via "Configuration -> LivePatch" and recieved this error:
    --- "The requested URL /pls/EOF/eof_manage_livepatch.main_page was not found on this server".
    I think that I can install v2.19 manually if need be.
    3a) Moving forward should I apply MW version 2.19 patch manually and try again with step 1.6? Is v 2.19 important at this stage?
    3b) I can down download patch 7429271 manually but will further patch downloads fail? Should I insist on getting this issue fixed before continuing?
    What is the best path for continuing?
    Thanks, Chaz

    **** Maintenance Wizard configuration Information ****
    Protocol = https
    Am I going to need to drop the MW schema and start all over or is there some way to change this dynamically?
    Another thing that I noticed as part of the HTTPS selection is that it added these lines to these files:
    listener.ora:
    SSL_CLIENT_AUTHENTICATION = FALSE
    WALLET_LOCATION =
    (SOURCE =
    (METHOD = FILE)
    (METHOD_DATA =
    (DIRECTORY = /up2001/R12/10g/102/eof/config/ssl_wallet)
    tnsnames.ora
    (SECURITY=
    (SSL_SERVER_CERT_DN="CN=nwb-chi-tdb01.itciss.com, O=Maintenance Wizard, OU=Development"))
    I don't think that they were there when I selected Protocol=HTTP.

  • 11i to R12 upgrade Doubts

    Hello,
    I am currently analyzing 11i(11.5.10.2) to R12(12.1.3) upgrade and need your expert adivce/suggestion on some of the doubts.
    Current EBS architecture:
    2 Node split architecture.
    Node1:- Web Tier
    Node2:- CP, Admin and Database Tier.
    OS:- Solaris 10 for both nodes.
    DB:- 10.2.0.3
    Although we are running only web tier on node 1 but complet application is installed and to maintain consitency we apply patches on both nodes. We want to keep same architecture going forward also.
    My doubts:-
    1) As per upgrade document we have to run ad preperation script after applying patch 7197849 and by default extent size is 128k(for db size upto 100Gb), as we are having db size of 360 GB ..how should we decide on correct extent size? Please pass metalink note id's if you are aware of.
    2)How much space is required for laying down R12 filesystem? I believe it should be same as for new installation. Also what will happen to 11i filesystems after upgrade i.e. ias and 8.0.6 oracle home?
    3)After upgrade will my user be able to check log and out of requests that ran on 11i prior to upgrade?
    4) Any idea on increase in demand CPU/memory/swap demand after moving to R12? we are upgrading like to like i.e. not adding any new functionality.
    5)How much space should be preallocated to various tablespaces prior to running upgrade, we are not having OATM and decided to move on to it after upgrade. If my database is of 350 GB then how much space should be allocated to filesystem prior to growth?
    6) We are having 11i split architecture where Node 1 is having Web tier and node 2 is having CP,admin and db tier. logically we should run rapid install steps along with all the patching on both nodes. Please correct me if i am wrong?
    7) At what point of time do i need to run patches in preinstall mode i.e before applying 7461070 or after it, i believe before. Also is MOS 1448102.1 correct note for deciding on patches to be run in preinstall mode? I believe these patches are not mandatory but recommendation from oracle to pre-captulate.
    8) After applying main upgrade driver patch i.e. 7461070 upgrade document says to 'Apply latest product patches', where can i get idea on patches to applied?
    Thanks,
    JD

    1) As per upgrade document we have to run ad preperation script after applying patch 7197849 and by default extent size is 128k(for db size upto 100Gb), as we are having db size of 360 GB ..how should we decide on correct extent size? Please pass metalink note id's if you are aware of.Use the default extent size.
    2)How much space is required for laying down R12 filesystem? I believe it should be same as for new installation. Also what will happen to 11i filesystems after upgrade i.e. ias and 8.0.6 oracle home?Disk Space Requirements
    http://docs.oracle.com/cd/E18727_01/doc.121/e12842/T422699i4773.htm#3708205
    8.0.6 and iAS ORACLE_HOMEs will be no longer used.
    3)After upgrade will my user be able to check log and out of requests that ran on 11i prior to upgrade?Yes.
    4) Any idea on increase in demand CPU/memory/swap demand after moving to R12? we are upgrading like to like i.e. not adding any new functionality.https://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+AND+Requirements+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    5)How much space should be preallocated to various tablespaces prior to running upgrade, we are not having OATM and decided to move on to it after upgrade. If my database is of 350 GB then how much space should be allocated to filesystem prior to growth?You need to migrate to OATM before R12 upgrade.
    FAQ - OATM - Oracle Applications Tablespace Migration [ID 418225.1] -- 5) Is OATM Mandatory for R12?
    6) We are having 11i split architecture where Node 1 is having Web tier and node 2 is having CP,admin and db tier. logically we should run rapid install steps along with all the patching on both nodes. Please correct me if i am wrong?Correct if you do not have shared application file syste,
    7) At what point of time do i need to run patches in preinstall mode i.e before applying 7461070 or after it, i believe before. Also is MOS 1448102.1 correct note for deciding on patches to be run in preinstall mode? I believe these patches are not mandatory but recommendation from oracle to pre-captulate.Yes. Please also see (R12.1: Oracle Financials Pre-Upgrade Patch - Supplemental List for EBS CUP [ID 1127593.1]).
    8) After applying main upgrade driver patch i.e. 7461070 upgrade document says to 'Apply latest product patches', where can i get idea on patches to applied?MOS > Patches & Updates > Latest R12 Pack & Recommended R12 Patches
    Identifying the Latest Family Packs for Oracle E-Business Suite
    https://blogs.oracle.com/stevenChan/entry/latest_available_packs_for_oracle
    Identifying Recommended Patches for E-Business Suite Environments
    https://blogs.oracle.com/stevenChan/entry/recommended_patches_for_oracle_e
    Thanks,
    Hussein

  • R12 upgradation :  query regarding patch 7461070

    I have to apply patch 7461070 as a part of upgradation. It's written in patch note that "must apply critical patch 6767273:R12.AD.A before applying the AD Mini pack". But how to check that instruction are not clear.
    FI :
    We only have izuprod.txt file under 11i APPL_TOP/admin
    $ ls -ltr *prod.txt
    -rwxr-xr-x 1 egapc2d appseeg 231650 Oct 30 2004 applprod.txt
    -rwx------ 1 egapc2d appseeg 4966 Oct 20 2006 izuprod.txt

    Run the query in (How to tell what your current AD patchlevel is. [ID 390671.1], under "Release 12 Single Tier" or "Release 12 Multiple Tiers" section), if you are on (Patch 4502962 - R12.AD.A) then you need to apply (Patch 6767273) before applying (Patch 7461070).
    Thanks,
    Hussein

  • 11i to R12 upgrade and Maintenance Wizard and the Maintenance Wizard Forum

    MetaLink doc 215527.1 recommends using the Maintenance Wizard to upgrade from 11i to R12.
    The Maintenance Wizard is extolled elsewhere in this Forum to replace the Upgrade Spreadsheet.
    And it is referenced a couple times in the 11i forum.
    But that's not much press considering Oracle's description below.
    Also, all the Maintenance Wizard MetaLink docs below reference a Maintenance Wizard forum.
    The forum contains excellent feedback including how to use Maintenance Wizard within a firewall.
    LCM: Maintenance Wizard
    But the Maintenance Wizard forum was Archived ~two weeks ago.
    Some clarification would sure be useful.
    What I'm actually trying to confirm is exactly what OAS or iAS or OC4J to use with it.
    Thanks in advance to anyone who can help!
    From 215527.1:
    Oracle Support provides Maintenance Wizard to guide you through the upgrade of Oracle Applications technology stack and products from Release 11i versions to Release 12. It draws on instructions from numerous manuals and other documentation to provide you with a complete picture of the activities required for an upgrade.
    Maintenance Wizard helps you to reduce upgrade tasks by dynamically filtering the necessary steps based on criteria it obtains from your Applications environment. The resulting report is a set of step-by-step instructions of exactly what you need to do to complete your specific upgrade, including any critical patches that your system may require. It can also automatically execute many of the tasks for you, so as to reduce the possibility of errors or accidental omission of vital tasks.
    These MetaLink documents reference the Archived Maintenance Wizard Forum
    434387.1 - Maintenance Wizard Data Sheet
    215527.1 - Maintenance Wizard Overview
    430732.1 - Maintenance Wizard Downloads
    329476.1 - Maintenance Installation Instructions
    430734.1 - Maintenance Wizard Users Guide
    405263.1 - Maintenance Wizard FAQ
    406917.1 - Maintenance Wizard Training
    418301.1 - Maintenance Wizard Webcast

    FYI,
    I am investigating what happened to the Maintenance Wizard forum. I was not alerted or consulted before it was moved to an "archived" location.
    I will provide an update here once I find out how to get the situation corrected.
    In the meantime, please use the other support channels (this forum, FAQ, iTAR's, etc.) for Maintenance Wizard questions and problems.
    Sorry for the inconvenience.
    -Vikki
    Product Manager for the Maintenance Wizard
    PS - To answer Tom's imbedded question (What I'm actually trying to confirm is exactly what OAS or iAS or OC4J to use with it.), please look at the Installation Guide (note 329476.1). In step 2 of the prerequisites, it states:
    Maintenance Wizard version 2.x requires Oracle RDBMS 10g (10.2.0) with 10g iAS (10.1.3).
    Hope this is what you needed, Tom....

  • R12 Upgrade Report from 11i Getting Error

    Hi everyone,
    We are currently working an R12 upgrade project from 11.5.10 to 12.1.3. I am currently converting a report from 11i to R12 but it is erroring out when I run it in R12. Below is the log. Any help would be greatly appreciated. Thanks.
    Payables: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    XXHH_APXNACHA_CHASE module: XXHH: NACHA Payment Format Chase (HHG)
    Current system time is 06-DEC-2011 15:52:03
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    P_PAYMENT_BATCH='JRG120111b'
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.US7ASCII
    Enter Password:
    MSG-00001: Org ID: 141
    MSG-00001: After SRWINIT
    MSG-00099: Inside Get_Company_Name
    MSG-00099: Payment Batch = JRG120111b
    MSG-00099: No reporting entity setup found.
    REP-1419: 'beforereport': PL/SQL program aborted.
    REP-0069: Internal error
    REP-57054: In-process job terminated:Terminated with error:
    REP-1419: MSG-00001: Org ID: 141
    MSG-00001: After SRWINIT
    MSG-00099: Inside Get_Company_Name
    MSG-00099: Payment Batch = JRG120111b
    MSG-00099: No reporting entity setup found.
    REP-1419: 'beforereport': PL/SQL program aborted.
    Report Builder: Release 10.1.2.3.0 - Production on Tue Dec 6 15:52:04 2011
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Program exited with status 1
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 3660174.
    Review your concurrent request log and/or report output file for more detailed information.
    Executing request completion options...
    Output file size:
    0
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 06-DEC-2011 15:52:06
    ---------------------------------------------------------------------------

    It looks as though its failing in your beforereport trigger.
    MSG-00099: Inside Get_Company_Name
    MSG-00099: Payment Batch = JRG120111b
    MSG-00099: No reporting entity setup found.
    REP-1419: 'beforereport': PL/SQL program aborted.I dont believe payment batches are used anymore as they need to be done via Payment profiles and therefore you will need to use Payment Instruction ids instead. Also the setup at R12 is Mosaic
    try including this. as the first statement in the Beforereport trigger. All the banks tables payment tables has changed so unless you have changed these to you will need to adjust these correctly to the R12 tables.
    BEGIN
         MO_GLOBAL.INIT ('SQLAP');
    MO_GLOBAL.SET_POLICY_CONTEXT('S',FND_PROFILE.VALUE('ORG_ID'));
    END;

Maybe you are looking for

  • Application Server Report Path

    Dear Oracle Gurus I am new to this area of expertise. We have a peculiar problem. Let me try to explain this We are running Oracle Appication server in Windows based environment( windows server 2003 i presume) we have multiple projects running in thi

  • I need to get rid of a calendar alert

    I keep getting a calendar alert that I need to delete (it's a medication prompt that is now a week off from the proper schedule.)  It says it is attached to the home calendar at my me.com account, but when I sign into the cloud to check, there is no

  • One of my 2 Mac Books burns DVDs - how?

    I bought my Macbook in 2006 and I'm able to burn DVDs (just files, not movies) in it. I tought all Mac Books did this, until my parents bought a new one in January 2007. Same computer, same system, and we never "pimped up" any of the computers. We us

  • No messages return from CALL TRANSACTION ABZON

    Hi all, I'm implementing an BDC program for multiple asset txn posting with tcode ABZON. If there's an error during the posting, I can get the detail system messages. However, nothing was returned from it if posting was successful. The sy-subrc is 0

  • Aperture can't read RAW files since update???

    So I went to import the pictures from the holidays into Aperture yesterday and it wouldn't read the raw files. Aperture just keeps saying it's generating thumbnails. I shut it down, got on a plane and tried again today, same problem and even the phot