1456 the remote management agent is unable to read information from edirectory

I have novell 6.5 sp6 and Zfd 7sp1.
From consoleOne I can done the action "remote control" when the
workstation is already turn on.
I can do the "remote wakeup" but after I can't do the login. I can't see
the window novell login.
When the machine is up I have tried to do the action "remote control" but
I have this error:
1456 the remote management agent is unable to read information from
eDirectory.verify the workstation object is valid and the middle tier
server is up and running.
Into the event log I have seen this (under application):
Remote operator: cn=moni.ou=mio.o=mytree.t=tree
console address: CN=P30g-0510_1_1_1.ou=workstation.o=mytree.t=tree
invalid NDS authentication informatiom.
Please, Can sonmeone help me?
thanks for all and excuse me for my poor english I'm italian.
Regards
Monica

I have found my problem:
On my server there isn't SLP configured.
Now my problem became how to configure SLP !!!
thanks for all
Regards
Monica

Similar Messages

1456: The remote management agent is unable

Hi
I have :
Server NW6.5 Sp5
Zenworks desktop 6.5 SP2
Client NT4 SP6 - Client novell 4.90 SP2
W2000 SP4 - Client novell 4.91 SP2 - Agent Zen SP2
WXP SP2 - Client novell 4.91 SP2 - Agent Zen SP2
The problem is that I can't connet with "remote management" some PC with XP;
The error in log file is:
#(464)# 10.16.27 02/16/06 Normal : Loading :
C:\Programmi\Novell\ZENworks\WMSchApi.dll
#(464)# 10.16.27 02/16/06 Critical : Workstation NOT yet authenticated...
#(464)# 10.16.27 02/16/06 Critical : ZENNDSUtil: initializeContext()
failed...
#(464)# 10.16.27 02/16/06 Normal : Reading workstation DN and tree name...
#(464)# 10.16.27 02/16/06 Normal : workstation DN -
PC01-WINXP-00:0B:CD:F8:F2:44., treename - TREE_GROUP
#(464)# 10.16.27 02/16/06 Normal : Loading :
C:\Programmi\Novell\ZENworks\WMSchApi.dll
#(464)# 10.16.27 02/16/06 Critical : Workstation NOT yet authenticated...
#(464)# 10.16.27 02/16/06 Critical : ZENNDSUtil: initializeContext()
failed...
#(464)# 10.16.27 02/16/06 Normal : Neither policy settings active. All
operations disabled.
#(464)# 10.16.27 02/16/06 Normal : ZENNDSUtil: Finished reading policies
#(464)# 10.16.27 02/16/06 Normal : ZENNDSUtil: Unloaded modules...
#(464)# 10.16.27 02/16/06 Normal : UnLoadZenAutilLibrary :Successfully
unloaded ZenAutil.dll
#(464)# 10.17.48 02/16/06 Normal : RMSessionFinished - Begin
If I check if the ogject workstation is authenticated on NDS, I not find the
connection.
I can connect only with che workstation that are list in connection.
Why some workstation connect to NDS ?
Thanks for help.
Gianluigi

Try deleting the workstation object and reboot the workstation (sometimes
a 2nd reboot is required).
> Hi
>
> Another information, if I use only the agent with out client novell, I
have
> no problem because the workstation is connect to NDS.
> If I want use client novell and Middle Tier is possible set Middle Tier
how
> default connection for remote manager ?
>
> Thank
>
> Gianluigi
>
> "Gianluigi Cortinovis" <[email protected]> ha scritto nel messaggio
> news:[email protected]...
> > No, I have disable windows firewall.
> >
> > Gianluigi
> >
> > "craig wilson" <[email protected]> ha scritto nel messaggio
> > news:[email protected]...
> >> Windows Firewall perhaps?
> >>
> >> --
> >> Craig Wilson
> >> Novell Product Support Forum Sysop
> >> Master CNE, MCSE 2003, CCNA
> >>
> >> Editor - http://www.ithowto.com
> >>
> >> (Seeking Full-Time Expert? Drop me a note :> )
> >>
> >>
> >> "Gianluigi Cortinovis" <[email protected]> wrote in message
> >> news:[email protected]...
> >>> Hi
> >>>
> >>> I have :
> >>> Server NW6.5 Sp5
> >>> Zenworks desktop 6.5 SP2
> >>>
> >>> Client NT4 SP6 - Client novell 4.90 SP2
> >>> W2000 SP4 - Client novell 4.91 SP2 - Agent Zen SP2
> >>> WXP SP2 - Client novell 4.91 SP2 - Agent Zen SP2
> >>>
> >>>
> >>> The problem is that I can't connet with "remote management" some PC
with
> >>> XP;
> >>> The error in log file is:
> >>>
> >>> #(464)# 10.16.27 02/16/06 Normal : Loading :
> >>> C:\Programmi\Novell\ZENworks\WMSchApi.dll
> >>> #(464)# 10.16.27 02/16/06 Critical : Workstation NOT yet
> >>> authenticated...
> >>> #(464)# 10.16.27 02/16/06 Critical : ZENNDSUtil: initializeContext
> >>> failed...
> >>> #(464)# 10.16.27 02/16/06 Normal : Reading workstation DN and tree
> >>> name...
> >>> #(464)# 10.16.27 02/16/06 Normal : workstation DN -
> >>> PC01-WINXP-00:0B:CD:F8:F2:44., treename - TREE_GROUP
> >>> #(464)# 10.16.27 02/16/06 Normal : Loading :
> >>> C:\Programmi\Novell\ZENworks\WMSchApi.dll
> >>> *******************************************
> >>> #(464)# 10.16.27 02/16/06 Critical : Workstation NOT yet
> >>> authenticated...
> >>> #(464)# 10.16.27 02/16/06 Critical : ZENNDSUtil: initializeContext
> >>> failed...
> >>> *******************************************
> >>> #(464)# 10.16.27 02/16/06 Normal : Neither policy settings active.
All
> >>> operations disabled.
> >>> #(464)# 10.16.27 02/16/06 Normal : ZENNDSUtil: Finished reading
policies
> >>> #(464)# 10.16.27 02/16/06 Normal : ZENNDSUtil: Unloaded modules...
> >>> #(464)# 10.16.27 02/16/06 Normal :
UnLoadZenAutilLibrary :Successfully
> >>> unloaded ZenAutil.dll
> >>> #(464)# 10.17.48 02/16/06 Normal : RMSessionFinished - Begin
> >>>
> >>>
> >>> If I check if the ogject workstation is authenticated on NDS, I not
find
> >>> the connection.
> >>>
> >>> I can connect only with che workstation that are list in connection.
> >>>
> >>> Why some workstation connect to NDS ?
> >>>
> >>> Thanks for help.
> >>>
> >>> Gianluigi
> >>>
> >>>
> >>
> >>
> >
> >
>
>

TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.com

hi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

1488: The workstation is no longer imported to the tree from where you are attempting to launch the operation. The Remote Management session cannot proceed.

After upgrading a Windows XP Pro SP1 machine to the ZfDagent from the
zfd65u2 patch I receive the following error:
1488: The workstation is no longer imported to the tree from where you are
attempting to launch the operation. The Remote Management session cannot
proceed.
For now I have went back to the ZfD 4 IR5 agent which doesn't exhibit this
problem. Any ideas?
Jim Webb

Jim,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Disable the Remote Management Service?

I know this is "Why would anyone want to do this" question but we are having conflicting issues in one of our labs between NetSupport and Zenworks when trying to run Adobe Flash. NetSupport is a tool that quite a few of our lab teachers use, it gives them the ability to see all of there students screens, take control of them, and a few other features, all from a console that runs on the teacher machine.
The problem comes in when running Flash if the student tries to create a text box and scroll inside of it then the computer crashes. We contacted NetSupport for help with this and they had us run a reporting tool that looked at the hardware setup and driver information. Then they setup a test machine and tried to replicate the problem and they were not able to. However they tech did note that in the scan of the machine there could be a conflicting issue between NetSupports Mirror Driver and DemoForge TightVNC Mirror Driver. I assumed the latter was part of Zenworks remote management. So we stopped the remote management service on a machine and tried to replicate the problem. We did not encounter the problem so we turned the remote management service back on and sure enough as soon as we tried to replicate the problem again the machine crashed.
Now when we tried to disable the remote management service in the services menu but it will not stay disable as soon as the machine restarts the remote management service is running and its set to automatic again.
Is there anyway to disable (preferable) or remove just the remote management piece with out removing the rest of the client from the machines?
Thanks,
Mike

You can configure this in the ZCC for which components you want
installed. You can deselect Remote Management.
Note: You can also disable or remove the Mirror Driver from the Devices
Control Panel under Display Drivers and it will not come back.
On 1/13/2012 2:36 PM, mshicks wrote:
>
> I know this is "Why would anyone want to do this" question but we are
> having conflicting issues in one of our labs between NetSupport and
> Zenworks when trying to run Adobe Flash. NetSupport is a tool that quite
> a few of our lab teachers use, it gives them the ability to see all of
> there students screens, take control of them, and a few other features,
> all from a console that runs on the teacher machine.
>
> The problem comes in when running Flash if the student tries to create
> a text box and scroll inside of it then the computer crashes. We
> contacted NetSupport for help with this and they had us run a reporting
> tool that looked at the hardware setup and driver information. Then they
> setup a test machine and tried to replicate the problem and they were
> not able to. However they tech did note that in the scan of the machine
> there could be a conflicting issue between NetSupports Mirror Driver and
> DemoForge TightVNC Mirror Driver. I assumed the latter was part of
> Zenworks remote management. So we stopped the remote management service
> on a machine and tried to replicate the problem. We did not encounter
> the problem so we turned the remote management service back on and sure
> enough as soon as we tried to replicate the problem again the machine
> crashed.
>
> Now when we tried to disable the remote management service in the
> services menu but it will not stay disable as soon as the machine
> restarts the remote management service is running and its set to
> automatic again.
>
> Is there anyway to disable (preferable) or remove just the remote
> management piece with out removing the rest of the client from the
> machines?
>
> Thanks,
> Mike
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

I want to share files from iMac to MacBookPro. In "Sharing" setup I want to check "screen Sharing" but get the error message"Screen Sharing is currently being controlled by the Remote Management service." What do I need to FIX???

I want to share files from iMac to MacBookPro. In "Sharing" setup I want to check "screen Sharing" but get the error message"Screen Sharing is currently being controlled by the Remote Management service." What do I need to FIX???

Care to share which OS you are using?
Have you read for possible solutions over in the "More Like This" thread over here?----------------------->

Upgrading the zenworks management agent

Hi,
We want to upgrade the zenworks management agent to version 4 ir6. What
is the best way to do this?
Is it possible to upgrade or do we have to uninstall and then reinstall
the newer version?
We have around 2500 and some users have restricted permissions.
We are running
Zenworks for Desktop 4 on
Netware 6 sp3
Cheers
Gareth
City of Bristol College

gareth,
>Is it possible to upgrade or do we have to uninstall and then reinstall
>the newer version?
Normally you can just upgrade on top and it doesn't cause problems.
Since the install is a MSI, the rights will be elevated automatically.
The only time I wouldn't upgrade over-top is if you are running the
original setup.exe agent. If you are running 4.0.1.4 then you are fine.
Jared
Novell Support Forums SysOp
Systems Analyst at Data Technique, INC.
Posting with XanaNews 1.17.5.8
Check out Novell WIKI
http://wiki.novell.com/index.php/IManager

RD Gateway Manager fails with "Unable to read RD Gateway Server Settings"

The question is: Why can't I connect RD Gateway Manager on the local RD Gateway server?
A month ago, I successfully configured a RD Gateway and to work with a RD Session Host. I set up the RDG CAP and RAP policies. I successfully tested connectivity through the gateway.
Today, I tried to access the RD Gateway Manager and now I'm getting the following pop-up message:
"Unable to read RD Gateway Server Settings"
Everything still works and I am able to confirm that NPS is running the CAP policy that I configured in RD Gateway Manager.
The certificate is from a trusted source. The Event Log does not show any errors.

Hi,
Thank you for posting in Windows Server Forum.
Please let us know some more information.
Did you make any change after setting up the server correctly?
Have you make any changes in IIS?
Please recheck your connection setting again with following link and provide us the result.
1. How To Work with RD Gateway in Windows Server 2012
2. Deploying Remote Desktop Gateway RDS 2012
Also go through this thread once.
Hope it helps!
Thanks.
Dharmesh Solanki

Message (on one account) when logging in: The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database.

After installing the reportservice/database i cannot use the Configuration Manager Console 2012 anymore with my own AD account. (The accounts of my colleagues are stil working)
When i login i get the following message:
The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database. The account must belong to a security role in Configuration Manager. The account must also have
the Windows Server Distributed Component Object Model (DCOM) Remote Activation permission for the computer running the Configuration Manager site server and the SMS Provider.
I checked the following:
I am a administrative user in SCCM (Full Administrator)
I am a member of the administrator group on the server
Deleted HKEY_CURRENT_USER\Software\Microsoft\ConfigMgr10
I tried to start it on multiple workstations and deleted my roaming profile
Any more suggestions?

Hi,
Maybe you could have a look on the below blog.
http://blog.nimbo.com/how-to-disable-user-account-control-in-windows-server-2012/
(Note: Microsoft provides third-party contact information to help you find technical support. This contact information
may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to read data from the SAP marketplace

Hi All,
    These days, certain packages in my download basketball cannot be downloaded, while others can be downloaded normally.
     After serveral redirecting, the SAP download manager keeps informing me that "Unable to read data from the SAP marketplace, check your settings and try again".
     Anyone knows how to solve it?
Thanks,
Yining

Hi Yining,
You user on SAP MarketPlace is locked.
You have to unlock it but I do not know the way.
Check in user data maintenance on SAP MarketPlace who is your responsible and perhaps he wwill be able to solve to unlock our user.
Regards,
Ronan

Unable to read data from the SAP Service Marketplace issue

Good morning, experts.
I´ve just installed the SAP Download Manager, but I can´t get connected to Marketplace.
First I tried downloading a file I could see in my Basket Download. Then I deleted it from the basket so I could test only the connection. In both situations I got the same error message: "Unable to read data from the SAP Service Marketplace (...)".
It is probably due to wrong settings, but I can´t figure it out. My settings are:
Address: https://websmp205.sap-ag.de/
User name: S0005951541
Password: (my password)
Proxy (my proxy settings)
Any ideas?

Thanks for your answer.
I can see my download basket online. I realize I didn´t delete the items so I could test purely the connection. I am going to do it again.
I found out I dind´t have permission to download those items, and with the right permission I could download them directly online.
As long as I have more information I am going to repost this issue on a new forum.
Thanks.

Unable to read payload from the message object in XI

Hello Guys,
Please help me about my problem in XI version 7.0.im quite new here.
im trying to test my config but error message occured. "Unable to read payload from the message object"
when i checked the comm channel this is the error message :
Error during database connection to the database URL 'jdbc:sqlserver://172.16.40.20:1433;databasename=TRAVEL:SelectMethod=cursor' using the JDBC driver 'com.microsoft.sqlserver.jdbc.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:sqlserver://172.16.40.20:1433;databasename=TRAVEL:SelectMethod=cursor': com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "TRAVEL:SelectMethod=cursor" requested by the login. The login failed.'
when i tried my login in sql it works...but in this message the login is failed..what shall i do..
Please advice.
Thanks in advance
aVaDuDz

Hi
Check with the connection string & Authorization of user you have used.
MSSQL string is
jdbc:microsoft:sqlserver://dbhost:1433;databaseName=example;SelectMethod=Cursor
While doing JDBC its good to refer Note 831162 lot of problems can be resolved.
Thanks
Gaurav

Unable to read payload from the message object

Hi
I have a scenario where i am send request to http receiver and getting the response. When I am testing through WFETCH it is working fine. But when i am testing through XI I am getting the follwoing error
Unable to read payload from the message object
I have tested the XI payload in mapping. I have done all kinds of testing but it is still giving the same error.
One more strange thing is
I have done one BPM scenario where Data is coming from Source to BPM( which is asyn) and then from it will go from BPM to Target (which is sync) But when I am checking the SXMB_MONI... it showing the messages like this
Source to BPM
Target to BPM
Target to BPM.
But i think it should show message like
Source to BPM
BPM to Target
Target to BPM
why i am getting the flo

Hi
Check with the connection string & Authorization of user you have used.
MSSQL string is
jdbc:microsoft:sqlserver://dbhost:1433;databaseName=example;SelectMethod=Cursor
While doing JDBC its good to refer Note 831162 lot of problems can be resolved.
Thanks
Gaurav

Unable to read information of application in app store. Still can download but unable to read the application infor before downloading

Hi,
Please help, unable to read information of application in app store. Still can download but unable to read the application infor before downloading.
I'm using iphone4, ios 6

Yes it sounds like your application could be corrupt.
First I would make sure you don't have a program like backup software or virus protection trying to read the files when you try to start the application. If not,
Do you have any backups or data exports? If so, I would try to restore them for the application
If you do what EsbHelper suggests, you will have to recreate the database. I think he is missing a few steps.
If you are going to try to recreate the application, you need to copy your outline rules files calc scripts and report scritps (.otl, CSC, REP and rul files) to s saved directory.
If you delete the directory using the file system, you orphan things in the security file. It's better to try to do it from EAS.
Once it has been deleted, and recreated from EAS, then copy back in the objects. You will have everything but data and security. those will have to be recreated.
As aI said first, the best way to do this is from some sort of backup. othersiwe it can get a bit messy

I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required. Can you please help?

I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required. Can you please help?

I fould a hack that makes the sites think you have the latest (Intel) version of Flash installed. So I installed it & it works with Firefox, TenFourFox & Safari. Here's the info.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
 Cheers, Tom

1456 the remote management agent is unable to read information from edirectory

Similar Messages

Maybe you are looking for