2 configurations / 2 control centers / remote DWH db / run_my_owb_stuff

hello guru's
To be able to install from 1 OWB repository on an environment where staging and DWH databases are on different servers we have 2 configurations and we use 2 control centers in order to achieve that goal.
When I go to the DWH_CONTROL_CENTER I can launch the mappings perfectly. However, when I try to launch the mapping via the notorious run_my_owb_stuff example script (procedure in db) I get the following error:
-20001 .. ORA-20001: Task not found - Please check the Task Type, Name and
Location are correct.
What should I do to resolve this issue?
Thanks in advance for all the valuable input.
Koen Verheyen
Tripwire Solutions

The mapping doesn't show in the select.
The problem might be the fact that I deployed it using another control center than the default control center. That control center is located on another (empty) owb repository. This was seemed for me the only way to get 1 repository and deploy to different databases.
When I perform the select on the other repository the mapping is shown in the select list.
Does this mean that I should try to do the run_task on the other repository?
When I perform the run_task on the other repository the mapping is executed fine.
So the solution I'm considering is launching the run_task from the staging repository on the dwh repository.

Similar Messages

  • ARD Hangs/Stops Responding when trying to "control" a remote system

    I'm having the toughest time with a new setup for a client. Recently the client purchased 3 brand new Mac Mini systems, and I purchased a Sandy Bridges MBP 13".
    After configuring the network and installing the Mac Mini's, I setup ARD so that I could remote desktop in to the systems for remote assistance and support. We purchased the Apple Remote Desktop administrator software from the Mac Store ($79.99 application). The administrator software seems to work great up until the point I try to "control" the remote device. I can schedule tasks, create remote users, modify files, remote upload/download files, and even observe or curtain the remote system. However, as soon as I click on "control" or start the session as observe and then attempt to take control of the remote system, ARD hangs and I'm forced to quit.
    I have attempted a fresh installation on all systems to see if there was something cooky that happened, and I'm always exhibiting the same problem.
    Does anyone have any suggestions of where to start? I feel like a fool, as I've spent $80 on a piece of software, that is absolutely useless to me as an IT admin... :\
    I appreciate any ideas!
    Regards,
    Jordan W.

    ...unfortunately the only way I was able to fix the problem was to re-format and fresh install the administrator computer.
    I'm going to mark as answered, even though it was not.

  • Remote Control and Remote View Problem

    Hi,
    I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
    Remote Control and Remote View works great but I noticed one problem.
    We have a logo of the school that is forced down on to the desktop when a
    user logs in through group policies. This logo works perfect for the
    desktop wall paper and loads every time a user logs in.
    When I Remote Control or Remote View a computer the users desktop wall
    paper turns from the logo being forced down through group policies to the
    desktop to a blue desktop wall paper.
    I would prefer the desktop wall paper staying the schools logo when I
    Remote Control or Remote View because if the desktop wall paper changes to
    the blue color I mentioned above when I Remote Control or Remote View the
    users computer, they will know that someone is taking over their computer
    which sometimes we dont want them knowing.
    We have Windows 98SE computer running Novell Client 3.4 and we have some
    computers running Windows XP Professional SP1 and Windows XP Professional
    SP2 both running Novell Client 4.91 SP2.
    The Remote Control and Remote View problem of the desktop wall paper
    changing on the users computer occurs on all operating systems mentioned
    above.
    Is there a solution to my above problem? When Remote Controlling and
    Remote Viewing someone's computer I don't want the desktop wall paper to
    change.
    Thanks!

    Bpilon,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Remote control and remote desktop client in sccm 2012 ?

    What is the difference between remote control and remote desktop client in sccm 2012 ?

    Remote Control is a built-in feature for SCCM 2012 and uses the RPC protocol. When you use this, the user can still be logged on while helping.
    Remote Desktop is a buit-in feature for Windows and uses the RDP protcol. When you use it, the user will be logged off.
    Why you would use one over the other depends on your requirements.
    Blog: www.danielclasson.com/blog |
    LinkedIn:
    Daniel Classon | Twitter: @danielclasson

  • Dump on screen when configuring Process controlled workflow

    Hi Experts,
    I am facing 1 problem in SAP SRM 7 ehp1.  I am configuring Process controlled workflow. Previous workflow settings was Application controlled workflow as its been upgraded from SRM 5. If i run a RFX (BUS2200) cycle in application controlled workflow environment, it works flawlessly.
    But when i change my workflow framework to process controlled workflow for all Business Objects. I face a dump when I am creating an RFX. The dump on the portal is:
    http://dl3803.ltisap.com:8040/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif
    DATREF_NOT_ASSIGNED
    No access possible via the 'NULL' data reference
    Method: PARTICIPATING_IN_ACTIVE_WF of program /SAPSRM/CL_PDO_DYN_MDA_WF_ADJ=CP
    Method: EDIT_DURING_WORKFLOW of program /SAPSRM/CL_PDO_DYN_MDA_WF_ADJ=CP
    Method: /SAPSRM/IF_PDO_META_CONF_BO~GET_BO_HDR_ACTION_METADATA of program /SAPSRM/CL_PDO_META_CONF_PROV=CP
    Method: /SAPSRM/IF_PDO_META_CONSUMER~GET_ACTION_METADATA of program /SAPSRM/CL_PDO_META_BO_RFQ====CP
    Method: /SAPSRM/IF_PDO_META_CONSUMER~GET_ACTION_METADATA of program /SAPSRM/CL_PDO_META_BO_RFQ_ADVCP
    Method: /SAPSRM/IF_PDO_META_CONSUMER~GET_ACTION_METADATA of program /SAPSRM/CL_PDO_META_HANDLER===CP
    Method: UPDATE_ACTIONS of program /SAPSRM/CL_CH_WD_MAP_IDENT====CP
    Method: /SAPSRM/IF_CLL_MAPPER~REFRESH of program /SAPSRM/CL_CH_WD_MAP_IDENT====CP
    Method: /SAPSRM/IF_CLL_MAPPER~REFRESH of program /SAPSRM/CL_CH_WD_IDEN_MAP_RFQ=CP
    Method: OVERRIDE_LEAVE_INIT_SCREEN of program /SAPSRM/CL_FPM_OVRIDE_OIF=====CP
    & when i check in st22. I get the dump as:
    Category               ABAP Programming Error
    Runtime Errors         DATREF_NOT_ASSIGNED
    ABAP Program           /SAPSRM/CL_PDO_DYN_MDA_WF_ADJ=CP
    Application Component  SRM-EBP-PD
    Date and Time          17.12.2011 15:46:56
    and get dump at:
      1 method PARTICIPATING_IN_ACTIVE_WF.
      2   " this method returns ABAP_TRUE if the logon user has an active work item,
      3   " i.e. he participates in an active approval workflow process.
      4
      5   DATA lv_curr_workitem_id    TYPE /sapsrm/wf_workitem_id.
      6   DATA lr_process_info        TYPE ref to /SAPSRM/S_PDO_WF_PROCESS_INFO.
      7
      8   " the default:
      9   rv_participates_in_active_wf = abap_false.
    10
    11   " The scenario is not valid for application-controlled workflow:
    12   " Any agents who may edit the document (approver and requester)
    13   " enter "Edit" mode right-away. No special handling possible.
    14   lr_process_info = io_apf_md_context->get_process_info_ref( ).
    >>>   IF lr_process_info->wf_version NE /sapsrm/if_wf_process_c=>GC_APF_VERSION_0200.
    16     return.
    17   endif.
    18
    19   " check if a valid workitem exists
    20   lv_curr_workitem_id = io_apf_md_context->get_workitem_id( ).
    21   IF lv_curr_workitem_id IS INITIAL.
    22     RETURN.
    23   ENDIF.
    the only configuration I change in the system is I changed the workflow framework to process controlled workflow.
    Kindly help.
    Thanks
    Anand

    Hello Anand,
    As per standard SAP recommendations the application-controlled workflow framework is only intended to be used if you are upgrading from SAP SRM 5.0 or earlier and you need to continue using your existing work-flows.
    The default workflow framework setting is the process-controlled workflow from SRM 6.0 on-wards and the user will be provided a option to switch to the application-controlled workflow framework.  The option to switch to process-controlled workflows is available only after you have once switched to application-controlled work flows but there will be a big caution that " If you switch from the application-controlled workflow framework to the process-controlled workflow framework; once a process-controlled workflow has been run, it is not supported that you switch back to application-controlled work-flows".
    As per the details given i got a feel that we have tried executing the scenario by switching between application and process controlled workflow and hence the system have become inconsistent and its dumping.
    I suggest you to raise a OSS ticket to SAP to resolve the issue.
    Best Regards,
    Rahul

  • Logic for configuration of profit centers

    Hi,
    I'm through with configuration of cost centers in our company, now I'm due to configure the profit centers. One point is, in our sister concern, they have copied all the cost centers and configured the profit centers on the same logic.
    could anyone suggest me on how to do this, if there is any copy procedure and what would be the effects of copying the cost centers and configuring profit centers with the same number.
    say if a cost center exists like: 402010 which is mumbai manufacturing, can I have the profit center with the same number 402010 for mumbai manufacturing, and what would be the effect of doing so.
    And can I copy the variances cost centers as well to make variances profit centers
    Plz suggest
    Regards
    Soujanya.

    Hello
    Please go through the IMG settings, after you get an idea from the below info
    The master data includes the master records for the individual profit centers, as well as the corresponding standard hierarchy and alternative profit center groups.
    Your company’s standard profit center hierarchy may somewhat resemble the cost center hierarchy. Consequently, Profit Center Accounting provides a function which lets you copy the entire cost center hierarchy to the profit center hierarchy (see Customizing). You can then change the profit center hierarchy with the normal maintenance transactions to meet your requirements in Profit Center Accounting.
    It is also possible to create account groups that are valid only for Profit Center Accounting. These account groups help you structure your information system to better meet your requirements.
    It is possible to copy the cost and revenue element groups used in Cost Center Accounting (CO‑CCA) or the balance sheet account groups used in Financial Accounting (FI) to Profit Center Accounting, and then change them in EC-PCA to meet your requirements.
    You can also maintain FI accounts and CO cost/revenue elements from the Profit Center Accounting application menu. However, these are not originally master data for Profit Center Accounting. On the contrary, the integration of the SAP system makes it possible for you to access the FI and CO master data directly.
    The assignments of all profit‑relevant objects to profit centers play an important role. These determine how your business is divided up into areas of responsibility. You make these assignments in the master data of the original objects (materials, cost centers, orders, projects, sales orders, assets, cost objects, profitability segments).
    Reg
    assign points if useful

  • Any configuration can control PO quantity exceed PR quantity?

    Hello all,
        Any  configuration can control PO quantity exceed PR quantity? thanks.

    hi,
    Set the Following Messages as errors:
    06 076 :  Materials of requisition & item & alr. ordered in full
    06 099 :  Materials for all purchase requisitions already ordered in full
    Hope it helps..
    Regards
    Priyanka.P

  • Can I control a remote Mac with Messages?

    My OS:  Mountain Lion
    I need to control a remote Mac. The remote Mac has Internet with WildBlue Excede (satellite). I am on a cable modem. Both Macs are hard-wired to modems. I have had no luck establishing a connection with Apple Remote Desktop. I remember a day when I was able to control a remote Mac with both Macs running iChat, albeit fuzzy and somewhat slow. Now, we have Messages. Can it be done with Messages? Is there a better way?
    Thanks

    If both machines are signed into iCloud with the same account, you should be able to do remote screen sharing.  This is a lot easier if you have an Airport Extreme or a Time Capsule that lets you put your iCloud credentials in there.
    I think with message you'd be able to remote screen control but the remote user would have to accept your request.

  • Configuration of controlling steps

    Hi sap gurus,
    I need help in configuring the controlling steps. I'll tell my requirements:
    we have 2 types of products being manufactured:
    1. standard products(made to stock) and 2. non standard products(made to order)
    My mangement wants to be able to get the information about the amount of labour spent for each activity like assembly, fabrication, anodising etc. (as far as standard products are concerned), apart from the overhead costs
    and as far as non standard products (we call them projects), the information that the management wants to capture is the costs incurred and revenues earned.
    SO, I think i need to go ahead and configure internal orders.
    So, as far as standard products are concerned, I think I need to go ahead and configure activity based costing and overhead costing.
    If I'm wrong plz advise me(IF THERES SOMETHING ELSE I NEED TO CONFIGURE) on that and based on my requirements, if somebody has any material or documents, plz do forward that to me.
    MAIL ID: [email protected]
    regards
    sandhya kiran.

    can anyone help me on this please
    regards
    sandhya

  • Configuring Access Control with OIM 11gR2

    Hi,
    I have to configure Access Control resource with OIM 11gR2. Kindly share relevant pointers.
    Best Regards,
    Varun

    I think this link will be Helpful
    22.5.1 Configuring Oracle Application Access Controls Governor
    http://docs.oracle.com/cd/E27559_01/dev.1112/e27150/segduties.htm#OMDEV3394

  • "screen sharing is controlled by "remote management".   ***?? help please!

    I am trying to get to my home computer from my away computer for the first time
    I have someone at the house who has turned sharing on but when they go to select screen sharing they get this message:
    screen sharing is controlled by "remote management".
    and an inability to click on the box.
    what's up??
    help please
    smiles
    kt

    Hey KT,
    I found a document that goes over that "Screen Sharing is currently being controlled by the Remote Management service" alert message. I'd see if any of the suggested steps help:
    Back to My Mac: Alert states Screen Sharing is controlled by Remote Management
    http://support.apple.com/kb/TS3647
    Welcome to Apple Support Communities!
    All the best,
    Delgadoh

  • How to set up the time a user can control a remote panel

    Hi Everybody.
    I'm doing an application using remote panels, however, I can't find information about how can I limit the time a user can control the remote panel.
    I've seen in the Property Node in Remote Panels:Connection To Clients the value "Control end time" which I supose it contains the time when the control is returned to the server but I have no idea how to modify this.
    Best Regards.

    Hi inner_trax, actually LabVIEW does not provide such a feature natively; however you can start thinking about having your remote panel VI shutting down after some specific time and then having in your server another VI running always and that each specific time ti starts the remote VI; think about it, it may help you reaching your goal.
    Eric NI

  • Option to disable iTunes volume control for remote speakers?

    I have noticed that with iTunes 10, the option to disable the volume control for remote speakers seems to have disappeared from Preferences>Devices. If you click the "?" button, the help window gives an explanation of what its for but the option to check/uncheck it clearly isn't there. Since iTunes 10, streaming my music from my iMac to my Denon receiver via Airtunes/Airplay with an Airport Express has been disappointing. The volume is far too low. With version 9 and every version prior, the volume control option was always there in preferences and I always had it disabled; music came through loud and clear but since this option appears to no longer exist, the volume through the Denon receiver fails to impress, even with the iTunes volume slider at max.
    Anyone else noticed steaming volume too low? If so, agree that it's a bug?
    Message was edited by: Brian I.

    I wholeheartedly agree with "I also used to disable the volume control to reduce the amount that my computer interferes with the sound before it gets to the external DAC." There is no reason why Apple shouldn't restore this important setting option as the volume control does negatively affect sound quality in a high-end set-up and we'd rather not just take their word for it that the volume control's maximum setting is the same as disabling it. Why does the volume slider change the output level even when using the Airport Express' digital output? It shouldn't, and it seems the sound is now being force sent through a stupid digital volume control for no good reason. If for no other reason the "disable" option should be restored to avoid inadvertent volume changes via the Remote app for iPod Touch and iPhone. Strangely as compared to several other posts here, my perceived volume level now seems louder than before, not softer as others are reporting. People that are serious about sound quality do not want iTunes or AirPlay (formerly AirTunes) to manipulate the volume level or any other aspect of the sound at all ever, as it can't help but only hurt. I also thought the "disable" setting was available in the Airport Utility previously, but it's vanished from there too.

  • Screen sharing controlled by remote managing service

    Unable to achieve screen sharing between my iMac and my MacBook Air.  System Preferences Sharing screen says 'Screen sharing is currently being controlled by Remote Managment service'.  How do I fix that and return to screen sharing capability?
    Thanks
    Jim

    1.  Indeed, Remote Management was checked.  I unchecked, then checked Screen Sharing - all seemed well.
    2.  Went to MacBook Air, restarted, attempted to Connect to Server, but connection failed.
    Now what?
    PS  How did Remote Management get checked in the first place? I've never used that before.
    Thanks
    Jim

  • Is it possible to use Apple Configurator to do a remote wipe of an iPad? Or must I use the profile manager tool within OS X Server?

    Is it possible to use Apple Configurator to do a remote wipe of an iPad? Or must I use the profile manager tool within OS X Server?

    no apple configurator connects via usb
    you'll need a MDM solution such as OSX server profile manager for remote wipe
    OTA pushing profies remote wipe etc
    you could use icloud for remote wipe

Maybe you are looking for