2 different versions of NetWeaver CE 7.1 on same computer

Hi experts,
is it possible to install 2 different versions of SAP Netweaver CE 7.1 EHP1 on same computer?
We have installed SAP NetWeaver CE 7.1 EHP1 SP3 with MII 12.1. Now we want to test MII 12.2 (on the same computer) which needs NetWeaver CE 7.1 EHP1 SP5.
Günter

Hi,
Its not a problem. You can install 2 CE systems of different version on same host. Make sure the OS is compatible with both.
Rgds,
Soujanya

Similar Messages

Two versions of jdk and RTE on the same computer

When Installing j2sdk1.4.1_01 I had not uninstalled jdk1.1.8 believeing that the new version would overwrite the old one.
But instead it installed alongside the old one.
I now have both showing up in the Cintrol Panel/Programms and I have two relevant folders on w2k drive.
Might the collide?
I was about to remove jdk1.1.8, but noticed that it takes 28.1 Mb whereas j2sdk1.4.1_01 is only 1.88 mb - perhaps j2sdk1.4.1_01 uses some files from the old one, and removing the old, I disable the new one?
The same about Java 2 RTE: I have both v.1.2.2 (19MB) and 1.4.1_01 (1.6 Mb)
What would you recommend?

Thanks, sounds like a good idea.
I uninstalled all the versions of JDK and of RE and re-booted the PC as prompted.
Question: folders j2sdk1.4.1_01 and jdk1.1.8 are still there - should I remove them manually?
Before reinstalling JDK and RE, I run an ASP page with a java-applet, sitting on my PC. As expected, the applet was shown as an empty rectangular.
However, when I accessed a similar page on the Internet, the applet there was working fine.
I was dead sure that the applet is executed on the client computer and that computer heeds RunTimeEnvironment which I uninstalled.
In any case all the applets should either work or not work, nomater whether they are sitting on my local drive or downloaded with a page from the Internet.
I feel I am missing something. Could you provide further comments?
a
PS. I have multiple partitions on that disk with two other OS - can this be a cause?
When RE is installed, which folder and where to is added?

Is it possible to have two versions of Adobe Reader installed on the same computer?

Some time back I upgraded from Reader 9.x to 10.x. Quite often I will email a pdf that I have open in Reader and this feature works perfectly with 9.x but was problematic with 10.x. -- sometimes it worked and sometimes it did not. This along with changes to the user interface convinced me to move back to 9.x. For my purposes stability takes precedence over bells and whistles (and the attendant problems B & Ws can create).
I see that 10.x has some added features that could be useful but I would prefer to keep 9.x and use 10.x only when / as needed.
I am using Windows 7 64 bit.

10 will uninstall 9. If you can figure out a way around it, they do not play well together and it is not recommended nor supported.

Usage of different versions of Oracle Server?

Is there any studies about percentage of usage of different Oracle Server versions available on the net?

In summary, is it possible to have different versions of NW Java running on the same machine? If so, what is the best practice and process for installing the new NW instance?
Yes, it is possible. You need to make sure that the hardware has sufficient resources (CPU, RAM, Disk space, etc) to accommodate a new instance, the system numbers and SID's are unique and the OS and DB are supported for the new system.
Regards
RB

Multiple NW instances of different versions on same server

Hello,
Our current landscape has two NW 7.2 Java AS instances installed on a single server. This solution works well for us, as one instance functions as our Dev server and the other functions as the QA.
I am looking to upgrade to NW 7.3 EP1. Is it possible to have different NW instances at different versions on the same machine? For instance:
NW 7.2 DEV (port 50000)
NW 7.2 QAS (port 50200)
NW 7.31 PRD (port 50400)
I've already attempted to install NW 7.31 Java as a New and additional installation on the server. Both methods have failed so far. I haven't dug too deeply into the logs yet as I wanted to get feedback from the community first.
In summary, is it possible to have different versions of NW Java running on the same machine? If so, what is the best practice and process for installing the new NW instance?
Thanks,
Greg

In summary, is it possible to have different versions of NW Java running on the same machine? If so, what is the best practice and process for installing the new NW instance?
Yes, it is possible. You need to make sure that the hardware has sufficient resources (CPU, RAM, Disk space, etc) to accommodate a new instance, the system numbers and SID's are unique and the OS and DB are supported for the new system.
Regards
RB

Trying to update iTunes, the installer keeps freezing at 'Running iTunes Installer Scripts'. i've tried several different versions of iTunes and can't install any of them. I'm stuck with Version 4!! Help!

I'm trying to update iTunes on my mac (Power Mac G5 running tiger), but it always freezes at 'Running itunes installer script'. I have tried a few different versions of iTunes, but I have the same problem with all of them. I'm stuck on version 4 (which came with my os discs)! Help?!

Ok, First this link should solve the windows scripting host error. I used "Download windows script host" in a google search and it was the first hyperlink.
http://www.microsoft.com/downloads/details.aspx?FamilyId=C717D943-7E4B-4622-86EB -95A22B832CAA&displaylang=en
I'm assuming you are trying to run the installer from apple. What I would suggest is you download the installer manually to your desktop then launch the installer. If try to run the installer over the intertubes you may run into a problem like you did.
Then I would uninstall itunes 8 and any software associated with it like the apple update software, quicktime, apple mobile device support. However uninstalling itunes should remove any additional software it installs. Then clean out your temp folder:
6. Clean out your temp folders,
a. C:\windows\temp (if one exists)
b. C:\Documents and Settings\{username}\Local Settings\Temp
Sometimes installers will pick up old files or won’t delete their temporary files.
Then with a newly download installer on your desktop try launching it. Let me know if that helps.
Here is an apple doc that help.
http://support.apple.com/kb/TS1331
Message was edited by: CoJeff

Share M4P music on same computer with different windows Sessions

According to the guidelines provided on this site, I already shared my music folder to enable different users on my single computer to access shared music files.
I kept different libraries to provide each user a different library to keep perosnal playlists, ratings and so on.
m4p shared files can be read by each user by clicking on the file in windows folder so I understand protection is shared on the same computer.
But there is no way to add a shared m4p file (itune protected)to the libraries !!
I used the "add file" or "add folder" function... only mp3, mpg, appear in the library, but no m4p.
How can a user manage a different library on the same computer and be able to add shared m4p files to each library ?

Jase, you said "Music sharing works across different user accounts, whether they are on the same computer or different computers", but my son will log into his account where he currently has no music. in the window on the left, we can see the other computers in the house that are on line, but there is no sign of the master account (on that same imac). i assume this is because the master account is not logged in, therefore the secondary accounts can't find the master account's music, nor can I from a remote computer ( my macbook, for example). for instance, right now from my macbook i can see my son's itunes list (on the imac) in my "share window" (even though his list is empty). he can also see my macbooks list in his "share window". he cannot see either my list on that imac, or his sisters list on that same imac. all acounts on the imac have sharing turned on, as well as "look for shared music" turned on.
i guess the focus is on this: can the master user itunes list be made available to other users on that same computer while they are logged in as other users (and the master account is logged off, which it has to be in order for the secondary accounts to be logged in, right?) I can't think of any other way to ask this, so i hope that clarified what we have tried and what we are asking for.

Confusion about third-party-libraries in different versions in CE 71.

Hi
After some research on the use of different versions of third-party-libraries in SAP netweaver CE 7.1, I am actually quite confused and would be happy if someone could shed a light on that subject....
1. Is there a way to tell netweaver CE 7.1 to use a library in my WEB-INFlib-folder by simple configuration?
E.g. we would like to use a third-party-lib in a newer version than the one which is loaded by CE 7.1. Many application server provide a simple configuration option (e.g inside META-INFapplication.xml) where the web as can be forced to use the library inside WEB-INFlib for this application.
2.Is the concept of "heavy loading" described in a blog by Georgi Danov(Using Hibernate in SAP NetWeaver Composition Environment) the answer to question 1.?
Does it also work for other third-party-libraries than hibernate? Does it work at all?
3. In the blog mentioned in question 2, Mr. Danov is talking about "shared libraries". Does this mean, that I have to forget everything about "bundled" and "standard" libraries explained in help.sap.com/CE, if I want to create a heavy loader?
He is referencing another blog (Applications and shared libraries) which is two years old? Can I still apply the information there to CE?
4. Are "Bundled libraries" applicable when using different versions of third-party-libraries in CE 7.1?
In "Working with libraries" (http://help.sap.com/saphelp_nwce10/helpdata/en/44/f4e00e56ec0486e10000000a155369/frameset.htm) it says:
"Bundled libraries: These provide resources only to a single enterprise application, and are packed inside the application's EAR file."
=>As I want to provide the lib only to my enterprise application, I will probably have to create a bundled library, right? Does this also work if netweaver CE 7.1 uses a different version of the same library?
5. Do I need Netweaver Developer Studio for creating "bundled" libraries?
Or can I copy the binaries in the WEB-INFlib-folder of my application, deploy it and use it?
6. Is configuration of application-j2ee-engine.xml the right place to reference a third-party-library in a specific version which exists in WEB-INF/lib-folder in my application even if it exists also in another version on netweaver?
=> In the document "Troubleshooting: Finding Missing Parent-Child Relations" it says: "To implement the chain of parent-child relations in the deployment descriptor of the component, use either application-j2ee-engine.xml (for applications) or provider.xml (for libraries and services)."
=> "Creating standard libraries" (http://help.sap.com/saphelp_nwce10/helpdata/en/44/f447a8d62b0484e10000000a155369/frameset.htm9 tells me, that I have to configure the file application-j2ee-engine.xml, too.
=> But in "Working with libraries" (http://help.sap.com/saphelp_nwce10/helpdata/en/44/f4e00e56ec0486e10000000a155369/frameset.htm) it says:
"Standard libraries: These provide resources to all enterprise applications deployed on the server. They are packed in EAR files like the enterprise applications."
=> Does this mean, that I have to force Netweaver CE 7.1 to use a higher version of a certain third-party-library? Does this even work? Do all applications deployed on Netweaver 7.1 have to use this library in the higher version?
It is really confusing to read through the documentation!!! Sorry for that avalanche of questions, but I really hope it will make the issue of using libraries (especially if they exist in different versions on the CE 7.1) a little clearer!
Best regards
Bettina

Hi Bettina,
I'll try to answer your questions:
>
> Hi
>
> After some research on the use of different versions of third-party-libraries in SAP netweaver CE 7.1, I am actually quite confused and would be happy if someone could shed a light on that subject....
>
> 1. Is there a way to tell netweaver CE 7.1 to use a library in my WEB-INFlib-folder by simple configuration?
>
> E.g. we would like to use a third-party-lib in a newer version than the one which is loaded by CE 7.1. Many application server provide a simple configuration option (e.g inside META-INFapplication.xml) where the web as can be forced to use the library inside WEB-INFlib for this application.
>
First of all, the appropriate docs are here: [http://help.sap.com/saphelp_nwce10/helpdata/en/44/f4e00e56ec0486e10000000a155369/frameset.htm|http://help.sap.com/saphelp_nwce10/helpdata/en/44/f4e00e56ec0486e10000000a155369/frameset.htm].
Basically what you do is define a lib project in the studio and deploy it do the server. This may be less comfortable then just configuring manually, therefore it work better in larger environments because the server checks that libs are available in all running instances - which it could not do if you manipulate diretories manually (an approach you should never attempt in any SAP envrionment)
> 2.Is the concept of "heavy loading" described in a blog by Georgi Danov(Using Hibernate in SAP NetWeaver Composition Environment) the answer to question 1.?
>
> Does it also work for other third-party-libraries than hibernate? Does it work at all?
>
If Georgi describes it, I hope so, as he is one of our developers who knows best.
> 3. In the blog mentioned in question 2, Mr. Danov is talking about "shared libraries". Does this mean, that I have to forget everything about "bundled" and "standard" libraries explained in help.sap.com/CE, if I want to create a heavy loader?
>
"shared" are all of theses libs, as otherwise they would be specific to an application.
> He is referencing another blog (Applications and shared libraries) which is two years old? Can I still apply the information there to CE?
>
This was about anearly version of CE and even Georgi updated the blog this year to talk about slight differences. So yes, this still applies.
> 4. Are "Bundled libraries" applicable when using different versions of third-party-libraries in CE 7.1?
>
> In "Working with libraries" (http://help.sap.com/saphelp_nwce10/helpdata/en/44/f4e00e56ec0486e10000000a155369/frameset.htm) it says:
>
> "Bundled libraries: These provide resources only to a single enterprise application, and are packed inside the application's EAR file."
>
> =>As I want to provide the lib only to my enterprise application, I will probably have to create a bundled library, right? Does this also work if netweaver CE 7.1 uses a different version of the same library?
>
That depends... Your application uses it's own classloader which means it should only use your libs in case there is another version available on the server. But if you're trying to deploy a lib that is used by a service of the server (int that case loaded by the server not your classloader!) I'm not so sure.
> 5. Do I need Netweaver Developer Studio for creating "bundled" libraries?
>
> Or can I copy the binaries in the WEB-INFlib-folder of my application, deploy it and use it?
>
You need the Studio. No way around that. [Edit:] Sorry, misunderstood you here: I thought you want to copy something into the deployed directory on the server! - Of course, any deployment method would do it and though copying binaries seems to be valid. However, I'm checking this currently with development in detail.
> 6. Is configuration of application-j2ee-engine.xml the right place to reference a third-party-library in a specific version which exists in WEB-INF/lib-folder in my application even if it exists also in another version on netweaver?
>
> => In the document "Troubleshooting: Finding Missing Parent-Child Relations" it says: "To implement the chain of parent-child relations in the deployment descriptor of the component, use either application-j2ee-engine.xml (for applications) or provider.xml (for libraries and services)."
>
> => "Creating standard libraries" (http://help.sap.com/saphelp_nwce10/helpdata/en/44/f447a8d62b0484e10000000a155369/frameset.htm9 tells me, that I have to configure the file application-j2ee-engine.xml, too.
>
> => But in "Working with libraries" (http://help.sap.com/saphelp_nwce10/helpdata/en/44/f4e00e56ec0486e10000000a155369/frameset.htm) it says:
>
> "Standard libraries: These provide resources to all enterprise applications deployed on the server. They are packed in EAR files like the enterprise applications."
>
> => Does this mean, that I have to force Netweaver CE 7.1 to use a higher version of a certain third-party-library? Does this even work? Do all applications deployed on Netweaver 7.1 have to use this library in the higher version?
>
>
>
> It is really confusing to read through the documentation!!! Sorry for that avalanche of questions, but I really hope it will make the issue of using libraries (especially if they exist in different versions on the CE 7.1) a little clearer!
>
> Best regards
> Bettina
Could you tell me what you're trying to deploy? I'll try to get Georgi on this....
Regards,
Benny
Edited by: Benny Schaich-Lebek on Nov 5, 2008 1:40 PM

Importing transports in different versions.

Dears,
I want to confirm that is it possible to perform transports in different version systems.Our requirement is to create the request from ECC5 and then import it in our Netweaver 04s server.
So first I want to know is it possible and second thing as i know for it i have to only manually copy cofile and datafile in target system and then by STMS add to buffer and then import,Is there anything else also i have to do like changing file permission.I am using windows 2003 server.
Please suggest.
Deepak

as u would be aware transport is done by r3 trans
different versions of R3trans are fully compatible with each other, because the data is transported in a standard format. Thus one can use different versions of R3trans for export and import.
Transports between different databases or operating systems are not a problem either.
When you transport between different SAP release levels, note that this usually does not present any technical problems due to the upward and downward compatibility of R3trans , but logical inconsistencies could occur in such transports
Further technical and logical problems for the various releases are outlined in notes 60928, 120151, 126776 and 330267.
hope this helps !
inspire by rewarding !

BPC User Management Tools in different versions

Hi all,
I am comparing the different versions of BPC from 5.1 to 10.0 and I have the following questions about user management tools:
1)
How does "User Management Server" work?
What's the difference when it is compared with "Active Directory" and "BPC NW Authorization"?
2)
I have summarized my understand on the availability of the user management tools in different versions of BPC but I don't know if it is correct.
Active Directory
Central Management Server
BPC NW Authorization
NetWeaver version
N/A
BPC 7.X, 10.0
BPC 7.X, 10.0
Microsoft version
BPC 5.1, 7.X, 10.0
BPC 7.X, 10.0
BPC 7.X, 10.0
Please kindly correct me if I am wrong.
Thanks in advance!
Winson

Hi Winson,
You are incorrect for BPC NW 7.5 - it uses Active Directory users...
Vadim

Latest version of Netweaver developer studio.

Hi all,
Can anybody tell me the latest version of Netweaver developer studio and the place from where we can download it.
Thanks in advance,
Ravi

Hi,
You can download from the following location. By the way iam giving the location for all 3 different versions of sap netweaver developer studio(Assuming that you want to develop some mobile applications)
http://service.sap.com - >Software Download - >SAP Support Packages - >Entry by application group - > SAP Netweaver - >SAP Netweaver ->
From here you have option to download 3 different versions. One is Sap NW 04 which is for Mobile Infrastructure 2.5, second is SAP NW 7.0 for MI 7.0 and last one is SAP NW Mobile 7.1 for SAP NW Mobile client 7.1.
So based on that you can click either on 1. SAP Netweaver 04 - >Entry by component - > Developer Studio ->NW deveoper studio->win32 and download the latest version which is SP22.
2. SAP Netweaver 7.0 - Entry by component -> Developer Studio - > NW developer
studio 7.0 ->WIN 32 and download the latest one which is SP15.
3. SAP Netweaver Mobile 7.1 - >NWDS UPDATE SITE CE 7.10->#OS independent->and download the latest one which is SP05.
Hope this helps.
Best Regards,
Siva.
PS: Reward with some points if the post is helpful

Your backup is from a different version of Microsoft SharePoint Foundation and cannot be restored to a server running the current version. The backup file should be restored to a server with version '14.0.0.6106' or later

while Restoring a Site Collection from a different server i got below error in SharePoint 2010.
Kindly let me know , which patch i have to install along with the download link please. i am unable to find the correct patch to download..
Thanks in Advance,
Tarun
TARUN

Hi,
According to your post, my understanding is that you get an error when you restore a site collection from a different server in SharePoint 2010.
I recommend that you can try to click the “KB2536599” for SharePoint 2010 version 14.0.0.6106 to download the patch from the following links and install the patch in your environment.
http://blogs.technet.com/b/moss_it/archive/2011/08/15/lista-di-versioni-di-sharepoint-server-2010-o-sharepoint-foundation-2010-wss-4-0.aspx
http://support.microsoft.com/kb/2536599
After the installation, you need to run the Configuration Wizard. Later you should be able to restore this site collection successfully.
For more information, you can refer to:
https://ammarfassy.wordpress.com/2012/11/29/restore-spsite-your-backup-is-from-a-different-version/
https://social.technet.microsoft.com/Forums/en-US/cb9fb524-2a65-4a59-8f09-fc86366dd1c2/restore-errorversion-of-14006106-in-power-shell?forum=sharepointdevelopmentprevious
http://blogs.technet.com/b/stefan_gossner/archive/2011/07/12/june-2011-cu-for-sharepoint-2010-has-been-re-released.aspx
http://www.sharepointdesignerstepbystep.com/blog/SitePages/SharePoint%20versions.aspx
Best Regards,
Yumi Fu

Your backup is from a different version of Microsoft SharePoint Foundation and cannot be restored to a server running The backup file should be restored to a server with version '12.0.0.6318' or later.

am trying to restore the bak file into a new site collection in my sp 2010 standalone env.
am getting error
PS C:\Windows\system32> stsadm -o restore -url http://srvr1-01:123/sites/Repository -filename "C:\mBKUPCOPY\Sharepoint_bankup.bak"
STSADM.EXE : Your backup is from a different version of Microsoft SharePoint Foundation and cannot be restored to a server running
the current version. The backup file should be restored to a server with version '12.0.0.6318' or later.
At line:1 char:1
+ stsadm -o restore -url http://srvr1-01:123/sites/Repository -filename "C: ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (Your backup is ...6318' or later.:String) [], RemoteException
+ FullyQualifiedErrorId : NativeCommandError

As stated in the other thread on this topic you can't restore a 2007 backup to 2010, it needs to be upgraded.
https://social.technet.microsoft.com/Forums/en-US/31c70f0a-5d89-4308-895b-af0c2b249114/restore-the-site-collection-from-moss-2007-to-sp-2010-site-collec?forum=sharepointadminprevious

Have just been told by BT that I need a new/different version of Thunderbird to work with the new BTMail system (used to be BTYahooMail) - do I?

I have had btinternet email for years, and Thunderbird for a long time too and have been happy with both. Unfortunately, I am not technical enough to understand most of the help or instructions on the Thunderbird support/info pages, but did manage to get TB set up in the first place (ages ago) and it seems to have worked well since. However, on Friday both of my BT accounts (two numbers, therefore two sets of BT email addresses) were moved over to the new BT Mail from the old BT Yahoo mail. I was unable to log in to one of them, but the other one was fine - I had some 'screen sharing' help from a BT technical chap to sort it out. However, Thunderbird was unable to conect with the email servers. I told BT and the tech chap tried to sort it out on the screen share, but was unable to (and I was unable to follow what he was doing). Some months ago, I made some changes, as requested by BT, to enable the transfer to go smoothly (!) but the man changed some things on Friday, I think, as well. He was unable to fix the TB problem and I can't figure it out at all, and the lady from BT Tech help who I spoke to this morning (and who had managed to sort out my BTID log-in problem, thankfully) had a look and suggested that maybe I needed an updated/new/different version of TB or 'another email'. Well, I'd really like to stay with Thunderbird and was hoping someone here could explain it in plain english for me, please? I was wondering what would happen, supposing I need to download an updated/different version, if I did that and then sort of re-installed my existing BT email addresses (just as if I was starting again with Thunderbird)? I do hope there is someone here who can help - please - I'm rather fond of that little blue bird. Thank you.

Just add the account again.
File|New|Existing Mail Account…
There should be no need to delete or reinstall anything. Re-installing Thunderbird itself is rarely useful, since doing this doesn't delete account data. Don't delete the old yahoo-based account until you're sure that everything you need to keep is in the new criticalpath-based account.
CriticalPath is the name of the business providing email services to bt.com.
Some not very reassuring reading [http://www.theregister.co.uk/2014/03/13/bt_likely_to_have_breached_data_protection_act_after_email_accounts_were_allegedly_compromised_over_http_and_details_kept_in_log_files/ here].
You'd think bt could run their own email service, wouldn't you? Yahoo was generally seen as a poor choice. I'm not sure that criticalpath is any better.

Could there be independent VI paths for different versions of LabVIEW?

Hello,
When jumping between different versions of LabVIEW (6.1, 7.1, 8.5) it is annoying that the current path for one becomes the current path for the other.
If I am working with LV 7.1 in a folder dedicated to 7.1 VI's, and then open LV 8.5, I don't want 8.5 to go to that 7.1 folder by default. Alternately. if I was working in LV 8.5, closed it out, and then I click on a 7.1 VI, I don't want it to open in LV 8.5.
I've tried changing the path options in each version of LabVIEW, but that doesn't seem to help. Is there any way of isolating these folder paths from one another? One of our newer LV guys accidently opened some 7.1 code in 8.5.1 and then saved it. Luckily, I had archived code to return to, but it could have been a disaster.
Thanks for any ideas,
McSynth

You're actually asking two different questions.
The first question has to do with which version of LabVIEW gets launched when you double-click a file. This is an operating system thing. The one that gets launched is the last one that got used. (Your first question will be: can this be changed? Answer: Change the operating system. Or, play around with the registry each time you quit out LabVIEW.)
The second question has to do with search paths. These are independent. However, a VI will contain information about its subVIs in terms of where to find them. This is not a function of LabVIEW, as it is a function of the VI. Thus, it will make no difference which version of LabVIEW you use to open the VI. You can, if you wish, modify the search paths that LabVIEW uses to find VIs for each version of LabVIEW from the Tools->Options menu. However, this will not eliminate the problem, and your best bet is to keep those backups frequent.

2 different versions of NetWeaver CE 7.1 on same computer

Similar Messages

Maybe you are looking for