Multiple NW instances of different versions on same server

Hello,
Our current landscape has two NW 7.2 Java AS instances installed on a single server. This solution works well for us, as one instance functions as our Dev server and the other functions as the QA.
I am looking to upgrade to NW 7.3 EP1. Is it possible to have different NW instances at different versions on the same machine? For instance:
NW 7.2 DEV (port 50000)
NW 7.2 QAS (port 50200)
NW 7.31 PRD (port 50400)
I've already attempted to install NW 7.31 Java as a New and additional installation on the server. Both methods have failed so far. I haven't dug too deeply into the logs yet as I wanted to get feedback from the community first.
In summary, is it possible to have different versions of NW Java running on the same machine? If so, what is the best practice and process for installing the new NW instance?
Thanks,
Greg

In summary, is it possible to have different versions of NW Java running on the same machine? If so, what is the best practice and process for installing the new NW instance?
Yes, it is possible. You need to make sure that the hardware has sufficient resources (CPU, RAM, Disk space, etc) to accommodate a new instance, the system numbers and SID's are unique and the OS and DB are supported for the new system.
Regards
RB

Similar Messages

Multiple log4j jars of different versions in classpath

Hi,
Does having multiple log4j jars in the classpath of different versions cause problem. If I have both log4j-1.2.14.jar and log4j-1.2.15.jar in my classpath will that cause a problem.
I have a scenario where in the production env. servers hung and when I checked the classpath it had both the above log4j jars. Could it be an reason for server hanging?
Thanks
AA

Hi GP,
Thanks for all the help again.
2.How to ensure the existing user updates /new user creations that comes from OID 10g propagate to OID 11g as well? Please suggest the steps likely involved in OIM 11g configuration.
3.Also need to ensure the password changes propagates from OID 10g to OID 11g after the above configurations. Please suggest ways for this as well.
->>>PLease clear your requirement. Do you want to transfer data from OID 10g to OID 11g via OIM? If yes configure OID 11g as trusted source and trusted source reconciliation bring OID 10g data to OIM and OIM will propogate it to OID 11g.
I think you are looking for LDAPSync between two OIDs. You can refer its documentation to configure LDAP sync, so whatever changes are done in 10g will be propagated to OIM 11g.
->>>>>>>>>>Yes I want all the users that were once created in OID 10g should also be propagated on OID 11g under a similar context/orgs. Also if any change / modification in the existing user happens on OID 10g should propagate the changes for the same user on OID 11g. Please guide me how to configure trusted source in OIM 11g?
Also can you please point LDAPSync document (for propagate changes for user passwords from OID 10g to OID 11g user). I understand that you are suggesting for the same purpose? Please correct me if am wrong.
Thanks again.

Different version of same form

I have 3 different versions of the same form that I need to make into editable PDF's. Each form has the same fields, placed in the same location however the logo and language is different on the PDFs. I have already made one form editable and it was VERY time consuming as there are many fields and check boxes throughout the document.
Is there a way to copy and paste (drag and drop) the editable fields from the completed form to the other 2 versions? Or will I have to create fields in each on individually? The first one took me multiple hours to finish and I am not looking forward to doing that 2 more times.
Any help or suggestions would be greatly appreciated!!!

All you need to do is open the document that has the fields and select "Document > Replace Pages" to update the underlying page contents with pages from a new document that you've created in the other language. Any fields, links, etc. will be retained.

Two Instances of different Versions of iAS on one Server possible?

Hi!
One of our customers wants to upgrade his Forms-Applications from 9.0.4.2 to 10.1.2. He says, we should install a second iAS (10.1.2) on the Development-Server, where already an iAS 9.0.4 runs. Is this possible? And if yes, are there any threads with a cooking recipe how to install the second iAS?
Thanx in advance for any answer!

Hi,
Yes you can. It's adviceable to do that on another server. If you decide to do that on the same server then you'll need to use another directory for your new AS.
Regards,
Hamdy

Create dev and test instances of Apex on the same server and database

I have a dev and prod instances of Apex on different servers. I want a test instance on the same server as the dev instance.
I am using workspace export/import so all instance workspaces have the same workspace id. The application ID is the same on each instance, in the same workspace. This allows pages to be exported/imported in the differenct instances.
My question is (I am sure it is obvious) can I have more than one instances of Apex on the same database (dev and test) and have each instance have identical Workspace IDs, etc.
Sam

Hi Sam,
But you can have more than one database on the same server.
What we do is create a separate database for each APEX versions we are supporting (we still have a customer using APEX 2.0).
All the databases are accessed with the same APACHE config. All you have to do is change the DAD and have a separate dad for each database (i.e. each APEX versions).
ex : /pls/apex_dev /pls/apex_test
This way , I can run different APEX versions on the same server.
Francis.
http://insum-apex.blogspot.com/

Usage of different versions of Oracle Server?

Is there any studies about percentage of usage of different Oracle Server versions available on the net?

In summary, is it possible to have different versions of NW Java running on the same machine? If so, what is the best practice and process for installing the new NW instance?
Yes, it is possible. You need to make sure that the hardware has sufficient resources (CPU, RAM, Disk space, etc) to accommodate a new instance, the system numbers and SID's are unique and the OS and DB are supported for the new system.
Regards
RB

Access to different application in same server

Any know an easy way to access the JNDI/EJB of a different application
running in the same server?
Perry Hoekstra, MS
E-Commerce Architect
Talent Software Services

Only the classfiles of any user-defined classes/interfaces that are possibly used
as parameters or return values from the methods in the home/remote interfaces. If
you aren't doing that, then the home and remote interfaces is all you need.
Bill
Perry Hoekstra wrote:
[email protected] wrote:
Hrm. It's no different from accessing EJB's deployed in the same application
(EAR) except that local calls are no longer possible.
Perry Hoekstra <[email protected]> wrote:
Any know an easy way to access the JNDI/EJB of a different application
running in the same server?
Perry Hoekstra, MS
E-Commerce Architect
Talent Software Services--
DimitriI should have explained myself better. I was thinking more from a
packaging point of view. Beside the remote and home interfaces of the
called bean, are there any other files necessary to be packaged with the
calling bean ejb.jar?
Perry Hoekstra, MS
E-Commerce Architect
Talent Software Services
[email protected]

Deployment warning -- Compiled by different version of Weblogic Server?

####<Aug 23, 2001 12:17:54 PM PDT> <Warning> <EJB> <alpha> <admin>
<main> <system> <> <010004> <The EJB deployment named: registration
was compiled by a different version of the WebLogic Server.>
I'm using WLS 6.0 SP1.
I'm getting the above warning messages for every jar file within my
EAR file that I try and deploy. I can't figure out the source of this
warning. I get this message in any of the following compilation
cases:
* compiling with BEA's default javac (Sun's JDK version 1.3.0)
* compiling with Sun's javac (Sun's JDK version 1.3.0_02)
* compiling with jikes
The message seems misleading and doesn't make sense to me. Anyone
know why I'm getting this error message? Anyone else getting these
warning messages?
Regards,
JD

Mihir Kulkarni <[email protected]> wrote in message news:<[email protected]>...
Could you please post this message on the ejb newsgroup.
The message does not seem to mean a different version of the java
compiler, but different version of Weblogic's ejb compiler -
weblogic.ejbc.
Were these EJB's compiled by a previous version of ejbc, say, the one from
51 ?
No, these EJBs were never compiled against a previous version of ejbc.
They were only created and deployed with WLS 6.0 SP1.
Also, please check the generated file inside the build\ejbcgen directory:
WLGENERATED to check which version of WL ejbc was used to compile it.
Here's contents of the WLGENERATED file:
#Wed Aug 29 11:04:33 PDT 2001
WLVERSION=WebLogic Server Build\:\t6.0 Service Pack 1 03/04/2001
22\:05\:05 \#
101616\nWebLogic XML Module\:\tNot installed\n
JD
>
JD Fagan wrote:
####<Aug 23, 2001 12:17:54 PM PDT> <Warning> <EJB> <alpha> <admin>
<main> <system> <> <010004> <The EJB deployment named: registration
was compiled by a different version of the WebLogic Server.>
I'm using WLS 6.0 SP1.
I'm getting the above warning messages for every jar file within my
EAR file that I try and deploy. I can't figure out the source of this
warning. I get this message in any of the following compilation
cases:
* compiling with BEA's default javac (Sun's JDK version 1.3.0)
* compiling with Sun's javac (Sun's JDK version 1.3.0_02)
* compiling with jikes
The message seems misleading and doesn't make sense to me. Anyone
know why I'm getting this error message? Anyone else getting these
warning messages?
Regards,
JD

Two Versions on Same Server

I was wondering if it's possible to have a STVN 2.1 OrgChart and STVN 2.0 Succession Planning installed on the same server? Has anyone seen this kind of setup before?

Hi Luke:
While I've not seen this done, I'd previously asked the vendor this question and was told the answer is yes. It makes sense, since the two applications really don't share any files and the transport package that comes with 2.1 doesn't 'remove' any functionality from SAP.
Good luck.
Thanks,
Chris
Edited by: Chris McNarney on May 28, 2010 10:16 PM

Multiple Oracle home and multiple Oracle database versions on same server?

Hi all,
I want to setup a test environment on single Windows XP server with an instance
of Oracle 10g and Oracle 11g. How can I install both versions without problems?
Thanks

Hi,
I am facing a problem on the same..
below is the link to my thread.
Multiple Oracle Home in Windows
Please reply me how to solve this problem
Thanks
Bhavik Fuletra

MIRO for multiple PO's with different Pymt Terms (Same vendor)

Hi,
Is it possible to process many PO's for the same vendor with different payment terms (PO has got diff. pymnt terms) thru MIRO. Vendor has sent invoice clubbing diff. PO's.
Regards
Nilesh

Hi,
There are different payment terms in financial accounting, sales & Purchasing.When you then enter a business transaction, the application in question will use the key specified in its area of the master record.
For exmple, in vendor master we have 2 payment terms one is at Company code level and the other one is at purchase organisation level.
I hope in PO, the payemnt terms will be picked up from the purchasing view, and in invoice payment term will be picked up from the company code level.
Since Payment term is at header level in invoice, it is not possible to have different payment terms for single invoice.
Also in terms of finance its not possible to have different payment terms for single vendor.
Regards,
Prabu

Installation of different version of same software

Hi everyone,
what is the way to do that? I mean for example:
package-1.0.tgz (depends on other-package-3.tgz)
package-1.1.tgz (depends on other-package-4.tgz)
I want to have both installed. Is there a way?
Thanks for your help.

You can install it to a non standard location, for e.g., your home directory. Of course this won't be possible with official arch packages, you'll have to compile yourself, i suppose.
And of course, there'll be the issue of the same executable name, so you'll have to adjust your $PATH accordingly.
Last edited by x33a (2012-02-04 13:51:01)

SAP different versions in iSeries server

Hi SAP experts,
We have a current SAP 4.7 installation in an iSeries server in PROD and in DEV machine. Is it possible to implement a new version like ECC6 using the same iSeries machine? Will the 2 installation for 2 different SAP version (4.7 and ECC6) possible in 1 iSeries DB server? If possible what do you think would be the impact to license and other aspects?
Hoping for your replies.
Thanks,
John

Hi John,
Yes, of course you can install multiple systems on one DB server. Licensing for the SAP systems should be independent of the host you are running on.
Although you are already aware of it and posted your question there, I want to point out for all others that there is a dedicated forum for this platform: [SAP on IBM i|SAP on IBM i]
Regards,
Thomas

Virtual instance of older version of the Server

I have a need to run a really old version of a particular software on a server and it's really dragging the rest of the system down, can't update OS X to 10.9 and even 10.8 doesn't work quite right with that software. So I wonder what would be the most professional and robust way to run two OS X instances at once, say the main one that's hosting all the normal server tasks is going to run 10.10 plus the Server app and there's going to be a separate instance running 10.7, very bare-bones with just that particular piece of code installed. One other requirement is that they must share a single IP. Any recommendations?

The limitations are 1 physical CPU and some advanced features are not available. You probably won't miss them.
I am not sure how it handles partitioning. Usually most people don't partition in VMware, you can add another virtual disk and is achieves the same result.
Simply stated, Hypervisor (or ESXi as it used to be known) installed on the Mac and becomes the operating system. It will reformat your hard drive and use the space as it needs. The VMs you create live inside Hypervisor. You can't manage the Hypervisor from the Mac it's installed on, it requires an agent to do that or the WebUI. Inside of each VM you can add disks, memory and such. Hypervisor manages the CPU usage across VMs as well as the RAM usage. Instead of partitioning, you create and add disks to the VMs. Those disks act in the same way as a Parallels or Fusion disk, they become "blobs" that take up space based on their size. You can add external hard drives to the machine and add the entire drive to the VM or put a VM disks on it for expansion.
Your Time Machine partition would be a VM disk added to a particular VM. You would need to create another VM disk or add an external drive to accommodate the other machine.
Again, it can get complicated.

Is it possible to install two GUI version on same server??

Hi all,
I am facing a typical problem.
I am using ECC 6.0 on Solaris server and accessing through CITRIX where SAP GUI 6.4 is installed.
I have got Internet Explorer 7.
Some dumps are cumming like message_server_x
Then I went for SAP GUI 7.1 in which error is not cumming.
There is only one CITRIX server at this moment and users from all the location is using through this on live system.They are not getting such issue.
But we the new project team is getting this issue of dump.
Now the question is whether it is possible to install SAP GUI 7.1 seperately on the same CITRIX server where SAP GUI 6.4 is running???
Thanks in Advance
Souren

I do not have knowledge in the field of CITRIX metaframe, i'm only can advise you read about the
"Application Isolation Environment" (AIE) --> For example read in http://support.citrix.com/article/CTX109664
. May be it's help you. The best way update your 640 version. Regards.

Multiple NW instances of different versions on same server

Similar Messages

Maybe you are looking for