2 issues with Importing an App with translations

Hi guys,
I've noticed the following issues in APEX 4.1 and also the 4.2 version on apex.oracle.com :
1) After importing a .sql file that contained the primary and translated application, if we change the ID of the translated application (which is allowed by APEX), the translation no longer takes effect. Even after re-doing a seed and a publish, although the .xliff file appears to be translated, the application is not translated in run time. But the internal APEX labels are (Welcome message, interactive reports, etc.).
Here's a detailed step of what I did:
-Created an application in English
-Mapped it to a French app
-Seed, translation, publish
-Tested the translation with the P_LANG change (translation based on Session) and the translation was in effect.
-Exported the application with the translation
-Deleted the application with its tranlsation
-Imported the application and reused the same ID
-Went in Shared Components > Globalization and changed the translated app's ID
-Seeded, published
-Tested the translation with the P_LANG change and none of the translation manually edited by me took effect.
Perhaps the problem lies in the mapping of the translation data?
2)If an application with the same ID as the translated application contained in your .sql file already exists, when choosing to reuse the ID of the .sql file, that application will be overwritten by the translated application without any warning and will no longer be listed in your applications list.
Please let me know what you guys think of these issues or if they aren't actually issues. Also, if there is a better place to report APEX issues, please let me know.

Finally found what we were missing. When installing multiple instances as in APEX 4, it required a new letter during setip for images. APEX 3.2 used i and APEX 4 was set as j. We needed to go into the application properties of each app that was converted to APEX 4 and change the image prefix to the letter j for Apex 4.

Similar Messages

  • I have a problem with Orbyt - an app with no way to cancel subscription

    I have subsbscribed to this app, what is an app with access to some newspapers and magazines online, but I have decided to not continue suscribed, but, that is my problem, there is no way to unssuscribe to this service (I cannot cancel the subscription but they can take my mone monthly from me).
    Let me explain the ways I have followed to cancel the subscription:
    Mail and call to Orbyt client service, they claim the sign on was made thru iTunes, so, they say they are not able to cancel my subscription. Contacted apple, they claimed is 'itunes store' and not apple which has to cancel the subscription, no way to contact itunes store staff to request to cancel this subscription. so, my question is this.
    Is there a way to cancel the subscription to this app thru itunes, a way to contact 'itunes store' people to request them to cancel the subscription?

    Great! I finally found how to cancel the subscription, but is a little tricky, and hard to find, anyway, hare is the solution I found to share with the most as possible:
    In iTunes, go to account details, and there is a section to cancel automatic subscriptions!!!
    Thanks all for your support and attention!!

  • Issues with updating Apple apps with app store

    I have begun to have issues with (all?) Apple apps and  App store. including not updating after download, and repeat downloading. Two examples:
    I had Pages 5.0.1. 3 days ago I used the app store to download Pages 5.1. This downloaded OK (watched the volume of data on Net Monitor). Although my Pages works OK it remains on 5.0.1, although the App Store shows that 5.1 has been “installed in the last 30 days”, and does not offer any further update. Same scenario for Numbers 3.0.1 and 3.1.
    on the other hand
    Keynote, iMovie and iPhoto won’t even open at all now, if I try to open them I am directed immediately to Apple sign-in in the App Store. Keynote and iMovie show updates available, but not iPhoto. I signed in when I tried just now opening iPhoto, and it immediately starting downloading the software again. I think my iPhoto was 9.5.1, downloaded in December and working fine since then.
    I have access only to limited slow expensive broadband. This is taking my whole monthly allowance.
    Is there some updating controlling software or file on the HD that could be corrupted?
    Any ideas?
    Thanks

    Have been to Library, and looked in Receipts/InstallHistory.plist
    This plist confirms that on 27 Jan App Store downloaded Pages version 5.0.1 again (actually for the third time it appears), although it was supposed to be downloading version 5.1. My App Store/Updates page says version 5.1 was installed (which it isn’t). Same issue for Numbers.
    The plist also confirms that the App Store forced me to download the same version of iPhoto in December and Today.
    Keynote and iMovie (not one of the iWork) won't open until I download again, but do not have the internet capacity to redownload these large files again and again.
    So far iTunes, Aperture and iBook do not seem to be affected. By the way have done simple things like restart, repair permissions etc...
    Are there some files/applications that control the downloading of new versions that might be malfunctioning?

  • Sudden problem with importing tiff files with alpha channel (CS5)

    OK this is driving me nuts. For years I have been importing image files that have an alpha channel  into FCP as.tiff files. I use Photoshop files only when I want to use the layers as they are too cumbersome otherwise). I have recent upgraded Photoshop, etc. to CS5 and now FCP won't import them anymore. I get a message saying: "File error: 1 file(s) recognized, 0 access denied, 1 unknown"
    I am not doing anything different and tiff files created in just the same way in an earlier version of Photoshop import and work just fine. Is this a CS5 bug? Does anyone know of a work around. I want to keep using tiff files as they seem to work best for me with alpha channel work (and I don't see why I need to reinvent the wheel).
    Thanks
    A

    I've had a similar issue recently. Same TIFF files downloaded from the same server, different FCP project, new error. I either see"File error: 1 file(s) recognized, 0 access denied, 1 unknown" or I get the even stranger, "Unrecognized file type."
    I can open them in PS and save them again as TIF, same results. I know these are not CMYK files but even if resave the TIF as RGB, I get the same results, they are not recognized by FCP.
    But if I open them in PS and save them as PNG with alpha, they improt fine.
    I have no idea what's going on.
    bogiesan
    Message was edited by: David Bogie Chq-1

  • Help with importing footage correctly with Sony Camera

    I have a Sony HDR SR 11 camera that records in AVCHD codec at 1920 X 1080i HD. When I import the m2ts files into Premiere they will get choppy in the time line and the footage breaks up digitally.  No matter what setting I choose it does not import them. Does anyone know if Premire supports this codec? Sony is clueless when it comes to this stuff.
    I have to actually render the thing in Sony Vegas Platinum and THEN import it into Premiere if I want it to work that way. Any suggestions?

    Hello All,
    Sigh, well it's just not working well for me lol
    I have rendered this several times. I got one to work, but I want to change my background color. I am trying to alter my size down to 1280x720 without getting any black bars on the video and I cannot render to flash as I need a different file type. Blu ray worked, but I forgot it separates the audio and that is not good to me.
    Below is a jpg with the dsitorition around the face and a rendered clip with no sound of the max headroom effect. I rendered with the upper field first so I do not know why I got this error.
    I thought this might be easier than you all downloading.
    http://i192.photobucket.com/albums/z150/thegaminggoose/Test-for-forums.jpg
    http://s192.photobucket.com/albums/z150/thegaminggoose/?action=view&current=r.flv
    I will try to render again in the mean time. Even reducing the  bit rate makes my 8 min video take 3 hours.

  • HT1937 Hi it Samantha brooks here I problem with download my apps with my bank card

    Hi I having poblem
    With add my bank card and I had new handset send out and I try get my apps back you guys block my card .2f
    <Personal Information Edited by Host>

    Hi Samantha,
    This is not Apple Support but a forum of users like you hosted by Apple.
    You rather talk to them directly from this list according to your region/country:
    http://support.apple.com/kb/HE57
    Edit: By the way please, remove all persona information from your post, thanks!

  • Please fix.  Cannot download the update.  Stuck with a dead app with projects I don't want to lose

    I'm not the only one with this problem. Is it ever going to get fixed?

    Reset your device. Make sure you have at least 2Gb of free space on it. Try the upgrade again, ideally by connecting your device to a copy of iTunes your device normally syncs with that already has the updated app, otherwise a strong Wi-Fi connection hooked up to fast broadband router.
    tt2

  • Problems with imported mono audio with stereo HD video FCE4

    This is with Final Cut Express 4.
    So here is what I am doing: I am recording video of my flight lessons inside my airplane with a mounted Panasonic HDC-TM90 HD camera.  Since it is noisy inside the plane, I am using an Olympus VN-4100PC digital voice recorder to pick up the Air Traffic Control and Intercom within the airplane (between me and my instructor) which is 22 KHZ mono.  I am doing this because I want the sound of the airplane and also the communication so everything works together and you get the best of both worlds (otherwise you would hear one or the other and that's pretty boring).  Ok, enough with the intro.
    Here is what I am having problems with -- when I get the video, stereo audio with the video and the mono audio all lined up in FCE in my timeline, it starts to get out of sync about 10 minutes or so into the film.  And it gets worse as the film goes on.  This is driving me nuts and I have NO idea out to fix it.
    The only thing I can think of is that my Digital Voice Recorder is recording at a slightly faster speed than the camera's audio and this is why it gets out of whack.
    Does anyone have any suggestions on how to fix this?  Or at least give me an explanation why it is happening?
    Thanks for any help!!

    Thanks for the reply.  I did this and it still doesn't seem to be matching up properly.  Tell me if maybe I missed something.
    1. I took the original .WAV file from my Digital Recorder and imported it into iTunes and then converted it into an .AIFF. 
    2. I took the .AIFF file and imported it into MPEG Streamclip and exported it as another .AIFF file that was Stereo and 48kHz. 
    Is there a step I missed?

  • How do i use a itunes card to buy things with in a app with the in app purchase option

    I purchased a itunes gift card and i am woundering if i am able to use it to purchase say... Gold in the in app purchase option. Is this possible to do? If so.. How?

    Some In-App Purchases require a Credit Card.
    iTunes Store: About In-App Purchases
    If you need to Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Problem with importing

    Hi all, I recently downloaded elements 11, and I imported some photos okay, but now it starts to import, gets about half way, and a box saying elements organizer has stopped working. When I went into problem details, it said appcrash. any ideas wot be goin on. (Im importing photos in raw) Regards. Paul.

    Thanks for the reply jon. I was only importing 152 pics. off my nikon camera. I re downloaded elements 7 on to the puter, and they went straight on there with no trouble, so I would of thought they would go straight on to elmnts. 11. ho hum.and strange.
    Date: Fri, 18 Jan 2013 04:58:39 -0700
    From: [email protected]
    To: [email protected]
    Subject: Problem with importing
        Re: Problem with importing
        created by 99jon in Photoshop Elements - View the full discussion
    Hi Paul  What are your system specs. Raw files are usually quite large so the process could be draining your memory (RAM). Are you importing from camera or from your hard drive. In the case of the latter try importing one folder at a time or in smaller batches. You can select files and drag and drop into the organizer. You must drop on the dark gray area between the left and right side panels (if both panel are visible).
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5003831#5003831
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5003831#5003831
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5003831#5003831. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Problem with importing a large number of images to Lightroom?

    I'm trying to import a large number of images from disk to Lightroom. If I select more that approximately 1500 images (1250 works fine), I get an error message saying "files do not exist". If I reduce the number of files imported, everything works fine. I can import in groups as long as the number selected at any one time is less that the ~1500 limit.
    Has any one had a similar problems? I'm running LR 2.4 64-bit on Win7 RC 64-bit, Q6600 processor, 8 GB RAM.
    Does not seem like this should be a problem. Its a real hassle to my workflow. I'm working on a series of time-laps movies (here is a link to a sample: http://vimeo.com/6375019).

    Thanks for your reply Sean,
    It is an internal disk drive, SATA II interface.I have no other disk/file problems, this is unique to LR as far as I can tell.
    I'm loading files onto disk from a CF card reader outside of Lightroom, then opening LR and telling it to import from disk. I've never had a problem before with imports. Experimenting with number of files, somewhere between 1250 and 1500 is where the problem occurs.
    Been busy making time-lapse videos of the fire in LA, so I'm away from the computer most of the time.
    thanks,
    Dan Finnerty

  • Import dmp database with EE8MSWIN1250 to AL32UTF8 (XE)

    I have problem with importing dmp database with EE8MSWIN1250 to AL32UTF8 (XE)
    I've tried to import my database dump with settings NLS_LANG=POLISH_POLAND.AL32UTF8 but it didn't work
    I had
    IMP-00019: row rejected due to ORACLE error 12899
    IMP-00003: ORACLE error 12899 encountered
    ORA-12899: value too large for column "MYDB"."AP_ARKUSZE_PRZECENY"."PRZEC_KOD" (actual: 26, maximum: 25)
    Column 1 1
    Column 2 Arkusz &#313;šredniowa&#313;&#317;on\$NR$
    Column 3 16-WRZ-2002:00:00:00
    so I exported my database with NLS_LANG=POLISH_POLAND.AL32UTF8 and next I tried to import this dump but it still didn't work.
    Anybody knows how to import dump database ??

    It isn't correct approach. Column size is one of database constraints and you compromised it, so beware.
    Correct approach is modifying columns to apply char length semantics, it means you should use following construct
    alter table tablename modify columnname varchar2(10 CHAR)
    In your code replace your execute immediate line with:
    EXECUTE IMMEDIATE 'ALTER TABLE ' || tn || ' MODIFY ' || cn || ' VARCHAR2(' || crec.data_length || ' CHAR )';
    Look at this example:
    This is your original table
    SQL>
    SQL> create table T2( c varchar2(10 byte) );
    Tabulka vytvo&#345;ena.
    SQL>
    SQL> insert into T2 values ('0123456789');
    1 &#345;ádka vytvo&#345;ena.
    SQL> insert into T2 values ('0123456789 few more');
    insert into T2 values ('0123456789 few more')
    CHYBA na &#345;ádku 1:
    ORA-12899: value too large for column "MIGR"."T2"."C" (actual: 19, maximum: 10)
    values longer then 10 characters are not allowed, it was your constraint, and now your modification
    SQL>
    SQL> alter table T2 modify c varchar2(20); -- 2*10
    Tabulka zm&#283;n&#283;na.
    SQL> insert into T2 values ('+&#283;š&#269;&#345;žýýáí');
    1 &#345;ádka vytvo&#345;ena.
    You solved the problem, you shoud be praised
    SQL> insert into T2 values ('0123456789 few more');
    1 &#345;ádka vytvo&#345;ena.
    But, you compromised your data model
    SQL>
    SQL> rem correct approach
    SQL>
    SQL> delete from T2 where length(c)>10;
    1 &#345;ádka vymazána.
    This solve both problems, and constraint is still valid
    SQL>
    SQL> alter table T2 modify c varchar2(10 char);
    Tabulka zm&#283;n&#283;na.
    SQL>
    SQL> insert into T2 values ('+&#283;š&#269;&#345;žýýáí');
    1 &#345;ádka vytvo&#345;ena.
    SQL> insert into T2 values ('0123456789 few more');
    insert into T2 values ('0123456789 few more')
    CHYBA na &#345;ádku 1:
    ORA-12899: value too large for column "MIGR"."T2"."C" (actual: 19, maximum: 10)

  • Deploying Phone Apps with our employees

    Dear all, first of all, I am quiet new. I've developed a internal news application just for our company employees. However, I am having trouble with deploying this app with our employees' phones. This app must be installed by only our employees' Windows
    phones. How can I handle this? Also, we have System Center Configuration Manager(SCCM). Thanks in advance..
    Omnipotent

    You need to create private store in you organization, and enroll device with your MDM server.
    Please check this link: Developing Company hub application.
    -RomeshDB

  • Excel issues with importing CSV or HTML table data from URL - Sharepoint? Office365?

    Greetings,
    We have a client who is having issues importing CSV or HTML table data as one would do using Excel's Web Query import from a reporting application.  As the error message provided by Excel is unhelpful I'm reaching out to anyone who can help us begin to
    troubleshoot problems affecting what is normal standard Excel functionality.  I'd attach the error screenshot, but I can't because my account is not verified....needless to say it says "Microsoft Excel cannot access  the file https://www.avantalytics.com/reporting_handler?func=wquery&format=csv&logid=XXXX&key=MD5
    Where XXXX is a number and MD5 is an md5 code.  The symptoms stated in the error message are:
    - the file name or path does not exist
    -The file is being used by another program
    -The workbook you are trying to save has the same name as a currently open workbook.
    None of these symptoms are the case, naturally. The user encountered this with Excel2010, she was then upgraded to Excel2013 and is still experiencing the same issue. The output of this URL in a browser (IE, Chrome, Firefox) is CSV data for the affected
    user, so it is not a network connectivity issue.  In our testing environment using both Excel2010 or 2013 this file is imported successfully, so we cannot replicate.  The main difference I can determine between our test environment and the end-user
    is they have a Sharepoint installation and appear to have Office365 as well.
    So,  my question might more appropriately be for Sharepoint or Office365 folks, but I can't be sure they're  a culprit.  Given this - does anyone have any knowledge of issues which might cause this with Sharepoint or Office365 integrated with
    Excel and/or have suggestions for getting more information from Excel or Windows other than this error message?  I've added the domain name as a trusted publisher in IE as I thought that might be the issue, but that hasn't solved anything.  As you
    can see its already https and there is no authentication or login - the md5 key is the authentication.  The certificate for the application endpoint is valid and registered via GoDaddy CA.
    I'm at a loss and would love some suggestions on things to check/try.
    Thanks  -Ross

    Hi Ross,
    >> In our testing environment using both Excel 2010 and 2013 this file is imported successfully, so we cannot replicate.
    I suspect it is caused by the difference of web server security settings.
    KB: Error message when you use Web query to a secure Web page (HTTPS://) in Excel: "Unable to open"
    Hope it will help.
    By the way, this forum is mainly for discussing questions about Office Development (VSTO, VBA and Apps for Office .etc.). For Office products feature specific questions, you could consider posting them on
    Office IT Pro forum or Microsoft Office Community.
    Regards,
    Jeffrey
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes  The app continually crashes during the picture import.  AND by the way it takes 10-15 minutes before it even attempts to import photos.  The screen says impo

    I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes  The app continually crashes during the picture import.  AND by the way it takes 10-15 minutes before it even attempts to import photos.  The screen says importing photoes but doesnt try to optimize or anything for 10 minutes.  I have a 3gs with 16Gb so its not a cheap phone.  I have 10Gb free.  I have 6600 photoes.  This is very frustrating and undermines my confidence in your products.  My ipod is an ipod 4 with 16Gb also.  It does the exact same thing to it.  The last time, I had to import photoes a few at the time and with it taking 10-15 minutes each time for 6600 photos it is a long frustrating process.  But it will import every photo a few at a time.  The error message is just that itunes has stopped working.  no hint as to why. AND of course, my phone is out of use for the entire time.  You guys must not want to believe ur phones are a necessary tool...or maybe you dont want the consumer to believe it is.  I have tried to find solutions on your website as well as through other 3rd party communities.  Ultimately they were of no use.  I stumbled onto my solution by accident since Im a bit of a computer geek...a semi-geek.

    I have this issue too, I went into my Windows event viewer. (should have looked at this a year ago when this started)
    it said this
    Faulting application name: iTunes.exe, version: 11.0.2.26, time stamp: 0x51253247
    Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
    Exception code: 0xc0000374
    Fault offset: 0x000ce6c3
    Faulting process id: 0x14d4
    Faulting application start time: 0x01ce194399f166ba
    Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
    Faulting module path: C:\Windows\SysWOW64\ntdll.dll
    Report Id: 0eb3c37f-8537-11e2-9351-50465d6737de
    basically whenever I try to sync my ipod touch 4G 64GB it crashes iTunes when it begins the pictures. if im lucky ill get 4-5 on there before it stops responding. its not my system or anything im running win7x64 8GB DDR3 ram (Corsair XMS3) AMD FX Eight core processor.
    It is silly that iTunes cannot add pictures to apple devices. it shatters whatever incline I may have to buy apple products. knda like the Airport Extreem router my dad bought the new firmware, caused my router to not function... why release firmware that breaks a product. -_- <-- off topic but still

Maybe you are looking for