2 levels of Classifications in activities in WEB UI

Hi,
We are using activities in WEB UI in SAP CRM 2007. We want to have 2 levels of classifications/reasons with classification 2 dependent on classification1. Can we use category modeler for that or category modeler is only for IC Web? If yes please advise steps including which catalog to use.
Can we use a combination of category and reason field with one dependent on other?
Thanks
Dan

Hi Gaurav,
Thanks for the response. Here are the details of what we want..
In the activitiy details screen in web UI, the 'reason' field values should be dependent on the value we select in the 'category' field.
The details are:
component: BT126H_CALL
view:SCDetails
category field:->context node BTACTIVITYH attribute STRUCT.CATEGORY
reason field:->context node BTSUBJECTF attribute STRUCT.CONC_KEY
Will wait for your response,
Kind Regards,
Dan

Similar Messages

Resource Levelling... Activities that cannot be leveled

I've created a resourced schedule for design management. The schedule seems to be fine when resource leveling when the "Defult Units / Time" is set to 100% and the "Max Units / Time" is set to 100%
I'm trying to reduce the available time for 2 of the resources from 100% to 60%.
When I resource level after changing the Units/Time percentages for these resources the Resource Usage Profile continually shows a over allocation. Change if back and is OK again.
When I review the resource level log it says that there are a number of "Activities that cannot be leveled".
When I check the tasks it seems they do not level.
These tasks all level when the Unit/Time is 100% or greater.
Does anyone know why these are not leveling??
Cheers

I'm not an expert at leveling resources, but I'd guess your resource assignment on those activities that don't level is at 100%, meaning you need the full attention of 1 resource the whole time that activity is active. If you reduce the resource availability in the dictionary to 60%, the activity still says, "Hey, given my duration and number of units, I need 100% of the resource." Thus, even if there were no other activities with that resource assigned, you'd be overallocated when these activities are scheduled to occur, and P6 can't level that resource/activity.
To experiment with this hypothesis, increase your duration on the activity (or decrease the number of units or the units per time... depending on your "duration type" setting) so that the resource requirements are at 60% (or whatever you're setting your max to) and try to level again.

How can I retain zoom level in safari Mountain lion for web pages in default folder

I have several pages I would like to load automaticly with a certain zoom level. When the page loads I have to constantly hit the command key then the + key so the page is large enough to read. I don't want to increase the font size but just to save this zoom level so next time I load this same page it is at the correct zoom level. I forgot to mention, how do I load several pages at once, Iquess this would be in my start-up folder or my default?
Thank You
John

Please send feedback to Apple. They do not read these boards.
This is a really annoying bug and I keep using chrome because of this.
Here's what I sent (feel free to copy and paste):
I am not going to use Safari until you fix a very simple annoyance which Chrome handles perfectly: It remembers the ZOOM level per domain.

Admin activities in web server

Hi Team,
What are all the Admin activities that we can done in presentation services ...?
Thanks,

Click in Setting - > Administration and you will be able to see all that you can do.
Refer to BI Admin Guide as well

Specification standards

Does Adobe Muse meet the latest specification standards of W3C and is it AA compliant?

Hi Gaurav,
Thanks for the reply, but can you just clarify a couple of points our client had raised please?
1) I need a definitive answer as to whether Muse is Priority 2 or level AA classification compliant of the Web Accessibility Guidelines? I’m assuming it is but really need this point clarified.
2) Our client has requested details of hosting security and protection. Can you please clarify this with regards to the Business Catalyst webMarketing yearly pricing plan?
Just looked up the following link on Google Analytics and this has answered another possible hurdle:
https://helpx.adobe.com/muse/how-to/use-google-analytics.html
Kind Regards
Maycreation Design Consultants
Hunger Hill Farmhouse
East Stour, Gillingham
Dorset SP8 5JR
Graham May
t: 01747 825551
e: [email protected]
www.maycreation.co.uk

WEB BEx Analyzer Comments on Query level

I would like to enable BW users to create comments for some queries an enable other user to read them. System BW 7.01.
Issues and questions:
-how to create comment on query level - it's always on data (KYF), Metadata or Master data level
-I would like to show the document icon - next to the query title (it's relevant for the query)
-when I create Comments (with the button in the standard template), it's on the data level (combination of KYF) - and when I
switch to icon display (settings) I get icons in every line. If this would be just at KYF header??
-where can I edit, delete, ... recorded comments
Thanks, Tom

Hi Tom,
1) If you want to create comments on query level, you need to create metadata documents, object type 'ELEM', object name is the technical name of the query.
2) Document icons are always shown in the data table. Thus it will be hard to show a document icon for a document on query level. If you are using web templates, you can insert a single document item on metadata documents to display the comment on the query.
3) Where the document is displayed depends on the document properties. If a characteristic is document property depends on the infoobject setting -> transaction RSD1 -> enter the characteristic -> tab 'general'.
To see the document properties you can execute the query for example in RSRT (html mode) -> create a new document on any cell. On the bottom you will see the document assignment. Compare this assignment with the cell next to it. If its the same the document will be displayed in both cells. The same can be done for example in java web -> create a new document and switch to the second tab ('BI').
4) Documents can be edited and deleted in the document browser itself, when you open the document in the executed query or in transaction RSA1 -> documents.
Best regards,
Janine

Material Classification view at plant level

My company has multiple plants set up with materials and I would like to know on the business side if there is a way to tell if the Classification view tab is missing for plant & material.
I've tried using SE16 MARA, table view, but it show materials at the client level with Classification view but not set up at the plant level. Tks,

Dear Friend
Which Class type are you using in the classification view? What batch classification you can use is dependent on the batch level you have chosen.
E.g. if your batch level is plant, then you have 022 batch class, While for material and client level you have Class Type 023. If you are going by the above e.g then you should be looking in to tables like MCHA, MCHB..........
You might be interested in following tables if you are using Classification.
KLAH Class Header Data
KLAT Classes: long texts
KSML Characteristics of a Class
AUSP Characteristic values
KSSK Allocation Table: Object to Class
CABN Characteristic
CAWN Characteristic values
Thanks & Regards
SE
Thanks & Regards
Gopal SP

Invalid month error in WEBI report level

Hi,
I had a issue with date format.I am using oracle10g as a backend database.I have a date object in universe level i used that object in web intelligence report level.I created prompt for date object after select the date from the list i am getting " invalid month error". In database level object datatype is timestamp.
How to solve this issue.can somebody help me to solve the problem.

Hi
Date Objects depends on various formats for different database
Make sure that u format date like MM/dd/yyyy in universe level . and the object should be in date datatype .
In the query level use prompt to select dates.
In report level
create a variable and use a formula like
todate(userresponse("Enter date");"")
Hope this helps U
Sunil

Access Level - WebI XI3.0/3.1

Hi all,
Is there any access levels like can able to edit WebI Reports but not Save?
thnx in Advance.
reddeppa k

Hi Reddeppa,
Hoffpauir's observation is correct and in order to attract more feedback that will serve your best interest, this thread will be moved to the appropriate section.
This is a quick mail to notify you that your question has been moved over to the Business Objects Administration section.
It is possible to set rights in Designer, however your question seems to be specific to the (CMC) central management console.
I hope this transfer will enrich your experince.
Kind Regards,
Ken

Web PLSQL Row Level LOV

Has anyone successfully generated a Row-level LOV from Designer in a Web PLSQL module, like you are able to do with the Forms generator?

Not exactly like that, but you can do a combined insert/update form if you're willing to play some tricks.
For example, create a multi-row update form on your table. Then call a function in your top-of-page-text which will insert a fixed number of empty rows in your table. Set the order-by to put those rows at the bottom.
This isn't how we normally want to work with our database. It's best done with a staging table, since you can't have any non-null fields and you'll be restricted to a sequence number for your primary key. You'll also need a process which will remove the empty rows if the user doesn't actually add data.
The advantage, though, is that it works to create a combined update/insert form with the WSG.
-- jim

Supporting activities

hi
would u plz send about supporting daily activities,monthend activities&yearend activities (fico supporting).
how many members will be there .what is help desk,schedule manager & solution manager.what is his role.what is his work.what is ticket flow.
thanks &regards
nagesh

*SAP BO reports on SAP BI:*
As we are creating OLAP cubes/Infocubes in SAP BI, same way BO has Universe.
Universe is based on direct Infocube/ Multiprovider/DSO(ods) and BEx query.
Universe Designer:
Only thing is one has to establish connection to access SAP BI system. To do this job, while choosing datasource, you have to select SAP Business Intelligence 3.x -- Client. And next screens it will prompt for User logon credentials to access SAP BI system. Once, connection is tested OK. Click next and it will list out all the OLAP Cubes available in SAP BI system and select the relavant one and click on next - next -- Finish.
Now you have created Universe on top of SAP BI system. Then Export the Universe to Server.
Open Infoview to start Web Intelligence report(s) and choose the Universe from the list of universes then it will take you to WebI Query panel , in that drag the Objects(Dimension/Detail/Measure) to result objects pane to see them in BO Report and to filter data use Query filters pane or do it in Report level.
Once you are in WebI report level , you will get lots of options to see your reports in different styles.
For better customizations: Use BEx queries based on Infocube. (In BEx query properties, one has to Check Allow OLAP access enabled)
BODI -->> BODS
After SAP aquiring BO and the latest version released with BODS(Data Services), It's basically ETL process, do the job same as what we exactly do to create Infocube. (Extraction of data , transformations and loading) and with additional transformations introduced.
Thank You!!

Need clarifications on NB Web services

Hi All,
We are trying to utilize the web services exposed by the CPO 3.0. However we are stuck with following topics/questions and not able to move forward. The intention of this, is basically to trigger/observe/stop/review activities from a custom portal similar to Cisco Prime catalog. We have referred NB Web Services guide, but it doesn't explain in detail
Process Level - How to accomplish a custom web service (Our definition of custom is a feature offered as part of CPO but not available as a web service) along with the guidelines of parameterizing techniques which is not been elaborated in the NB_Web Services Guide (available online along with WSDL).Example - Guidelines to create a new web service Process by name startUpdateDatabase(parameter1, parameter2,…... parameter n)
Instance Level - Development documentation of web service which can give the exact node status of the current instance runningAnticipated return statement similar to currentExecutionNode - (node n) where n is the node ID/name of the requested instance
Tasks Level - Lifecycle documentation associated to tasksExample - ItilStatus(ItilTaskStatus) - Status of Task (New, assigned, pending, InProgress ….. Etc.,) - Understanding of the complete lifecycle but not just parameters. How to obtain?
Sample code to perform tasks like InputTask and ApprovalTask which involves user effort (say, approving an action) using web services and when the task is performed by an user, the status of the flow of information changes from assigned to completed.
Are there any Web Services development guide with examples(Apart from NB Web Services Guide)?
Any help would be much appreciated .
Thank you!
Regards,
Eswar

ok... I'll give it a whirl.
As a side note, you should be able to use something like SOAP UI if you are trying to easily form the calls. You can use SOAP UI and connect to whatever WSDL in the NBWS you want and it will give you all the methods and you can create sample calls and try them out. This is shown quite a bit in my blogs. For web service work, my blogs are a great place to start.
Process Level - I believe what you are asking here is how to get something to start via NBWS? In 3.0 you must add the trigger "Started by Web Service". There you can configure the exposed name/method for that web service. After saving your process you must refresh/bounce the web services and then your process will show up in the process WSDL (by default: http://host:port/WS/Process?WSDL). You can then make calls to it.
I believe you are asking how to find the status of a current process? Or are you asking about the exact status of a CPO node in the cluster? If it's the process, you can use the process instance WSDL @ http://hostname:port/WS/ProcessInstance?WSDL. If you are asking about finding the status of a CPO node, then you can query the DB for that or you could just use the windows activity "Query Service" and query for the CPO Service to be running. You would have to write this yourself but it's quite easy. (in fact I probably have a blog showing it somewhere) There is *NO* webservice to give back the status of a CPO node's service
Not sure what you are asking about tasks. You can use the NBWS for them in http://host:port/WS/Task?WSDL . The lifecycle of a tasks should meet that of the ITIL model as that is what CPO is patterned after. We do not offer training on this lifecycle, that would be something you would fine with ITIL training. Many of the customers (who are not ITIL trained) only use a couple of status and go with it because it means something to them. IE. Some only used CLOSED to close out tasks, but some used RESOLVED. It's really up to end user determination.
I would create the task via web service and then update it with the proper information. Again, like I mentioned above, if you need to see samples or the layout of one, then use SOAP UI. It will give you a template layout and then you can fill in the required information. We do not have a sample of every single web call we produce. (since SOAP UI does such a great job) You can also use the WEB SERVICE EXECUTE activity inside of CPO and this gives you inputs to do it directly (although does not give you the soap message like SOAP UI does)
No. The NBWS guide is it. Use SOAP UI as per above. I have done a numerous amount of blogs that have some information in them and have some examples, but I have not done everything because the use case has not crossed my desk.
If you have more pointed use case and what exactly you are trying to do we can go into further detail maybe, but the above is a good start.
--Shaun

Time From field is not getting displayed in correct format in Activities

Hello Experts ,
We are facing one problem in UI , when we search for Activities in Web UI . In the field "Time From" we are not getting the time in correct format , ie is instead of getting time as say 13::38 we are getting time as 13::3 , but when we place cursor on it the field it shows correct format say 13::38.
Can any one suggest how to display in correct format ?
Regards
Vinayak

Hi,
Its an SAP Product error.
Please check note 1151821 ,if you facing the greyed button in time.Also the other note 1136402 needs to be applied for time display issue
- Bobby

Eclipse web project using Glassfish 4.1 can not load some libraries in modules directory

We installed latest "Glassfish Tools for Luna" (updated on 2 October 2013) and created a new Eclipse dynamic web project using Glassfish 4.1. When try to annotate a class with "javax.enterprise.context.ApplicationScoped", it complains as "ApplicationScoped cannot be resolved to a type" although imported as "import javax.enterprise.context.ApplicationScoped".
Checking "glassfish-4.1/glassfish/modules/" directory and there is cdi-api.jar that contains ApplicationScoped class. But when checking from the project libraries in the eclipse, couldnt see such a jar.
My configuration:
Eclipse 4.4
Glassfish runtime java development kit : java 1.8.0_20
Project java development kit : java 1.8.0_20
Project compiler level : 1.8
Project facets : Dynamic web module 3.1, Java 1.8, Glassfish Web Extensions 4.0, Javascript 1.0
How to solve this issue?
Thanks.

There are 274 jars in the Glassfish 4.0 modules directory, whereas there are 282 jars in the Glassfish 4.1 modules directory. So it is not only cdi-api.jar. Moreover there are some libraries, the names of which have been changed.
Why not simply importing all libraries in the modules directory to Eclipse, like Tomcat plugin does for tomcat/lib directory? So when manually deploying a library(jar) to modules directory Eclipse will discover it automatically.
Thanks.

Sun Web server 6.1 SP9 Reverse proxy - Changing Web Server Context

I am trying to configure a Reverse Proxy such that it can change the context of the requested URL.
My SOWS reverse proxy plug-in is running on server server1.sample.com and the destination server is running on server2.sample.com. The use case, the incoming URL is [|http://server1.sample.com/dummy1/]...... and I need to map this to {color:#0000ff}http://server2.sample.com/*dummy2*/.....;{color} It looks like the reverse proxy only maps to a server level but disregards the context. The reason I say that, in the server 2 logs I see - .... trying to GET /dummy1....; I needed the call to look for dummy2 context. Can this be done?

well, web server uri processing does not understand web application level context (in terms of java web applications). however, if you would like to map all uri's ending with /dummy1 to go to /dummy2, then you can easily do this with web server 7 regular express processing
http://blogs.sun.com/elving/entry/mass_virtual_hosting_in_7
http://docs.sun.com/app/docs/doc/820-6599/gdaer?a=view
besides web server 7 includes a very tightly integrated reverse proxy unlike 6.1 where you need reverse proxy as a separate plugin. so, you might want to check out if ws7 can serve your needs
- sriram

2 levels of Classifications in activities in WEB UI

Similar Messages

Maybe you are looking for