2 users with same user id in OIM!

hi,
can you please help me with this production environment issue!
there are 2 users with same userid, same first name and last name in OIM but are only one is present in all of the target resources. i just dont know how to delete such user, as the two are in active state.
Any suggestions are welcome!!
Thanks!

This can only happen if something went wrong with your trusted reconciliation settings. Mostly with the settings of recon rule. Please check whether in the rule definition, whether it is set to case sensitive. Even that, it shouldn't create 2 users with the same user id in OIM as user id is unique in OIM enforced in the database table.

Similar Messages

  • 2 users with same User ID, Big Problems

    I currently have User A from macbook 1 (old user I no longer use) and User B from macbook 2 and 3 (new user I've been using for ~4 years).
    I had upgraded from macbook 1 to 2 to 3 and am currently running 10.9.5
    I thought I had deleted User A through Finder a couple months ago. Since then I've been having mild annoying issues
    - ppt crashes in slideshow
    - quicktime player won't open
    - installer doesn't work most of the time
    - sometimes, my current user B will randomly switch to user A while my computer is on
    - Some applications will randomly complain they can't open because they can't find User A's directory.
    I ran dscacheutil -q user | grep -A 3 -B 2 -e uid:\ 5'[0-9][0-9]' and found
    name: A
    password: ************
    uid: 501
    gid: 20
    dir: /Users/A
    shell: /bin/bash
    name: B
    password: ************
    uid: 501
    gid: 20
    dir: /Users/B
    Running the command . -list /groups GroupMembership | grep user
    returns nothing for user A and returns the following for user B:
    _appserveradm            B
    _appserverusr              B
    _lpadmin                       B
    admin                          root B
    com.apple.sharepoint.group.1   B
    I'm at my wit's end here. I tried using console to debug the reason behind why certain applications crash and the common theme seems to be "com.apple.launchd.peruser.501: (......................................) Could not setup Mach task special port 8: (os/kern) invalid argument"

    agarcia59 wrote:
    Hi Drew and Linc
    Drew, I see what you were going for, but I only wanted 1 user. I tried doing both your methods and am unfortunately still having the same issue.
    I found a old working backup on an computer of mine and am comparing the users on that computer and this one. After running dscacheutil -q user | grep -A 3 -B 2 -e uid:\ 5'[0-9][0-9]'
    my current computer shows:
    … (not relevant info)
    I could move the working backup to my current computer, but It's over a year old (lots of new info on my current computer, it would be a huge pain to manually move everything over.
    Does the appearance of macports and messagebus users in my current glitchy computer an issue? Why don't these users show up in my old functional computer?
    Thanks for your help.
    You tried both methods? So when you tried my method of erasing & reinstalling the OS it failed did it? You then restored this old broken OS back to the Mac? Be honest – you didn't erase & reinstall did you?
    Stop messing around in Terminal, backup, erase, reinstall, migrate the users you need by hand. It is incredibly simple if you stop getting distracted by Terminal.
    I don't see why you have to bring another computer with an old backup that you do not want to use into this issue! Stop 'thinking around' the issue at hand.
    Linc's method should have resolved this unless the OS was in a complete mess (which seems likely considering your desire to fool around in Terminal).
    The Macports user is from the software you installed, message bus is also likely to be from something else you installed (possibly via macports). Neither should effect the logged in user.
    It's looking like you are intent on playing with the OS (or more specifically playing in Terminal until things work), I can't bear to watch.
    Backup, erase the internal disk & move the users home folders to /Users in Finder (NO TERMINAL NEEDED) & re-add that user in Users & groups.
    If you need help with that I will explain (again), but you can continue messing in Terminal with things you already broke & don't understand in your own time.

  • How can OIM provision users with same Display Name in AD?

    I can create users with same First Name, Middle Name and Last Name (same Display Name) in OIM if they have different UserId.
    But I can not provision two users with same Display Name to one Organization Unit in AD, the resource provisioning shows
    Status: Rejected
    Response: AD user already exists
    Can AD be configured to create users with same Display Name (different UserId) in one OU, or would I have to create logic in OIM to modify the display name so it gets accepted by AD?
    Thanks!

    Thanks Nitesh. Also, I can create the user with same DN in different OU's, not in same OU.
    I agree once we determine that same cn exists in one OU , I can modify the display name by appending a number at the end or something. I understand the logic but I need more details on how to specify this logic in the pre-pop adapter, can you please share more details.
    Thanks a lot!

  • Email accounts with same user id

    Hi,
    how can we create 2 different email accounts in different domains with the same user id's . When i try to create an email account with a username thats already exist it shows the message that, 'user already exist'
    Is it not possible to create 2 different accounts with same user id ? please help me to solvwe this issue
    Regards

    She can't. She needs to setup her own AppleID and then create an iCloud account using that.
    You can still continue to share your existing AppleID for iTunes and App Store purchases.

  • How to get Unique calid for users with same name in multiple domain env..

    I found we need to use "-k legacy" option for creating users in non-hosted setup..
    I had two domains default as xxxx.com and the one that I created as yyyy.com
    When I have users with same name in two of the domains as user1..
    The calid for both of them is... user1 ....so they share the same calendar
    When Im in valid SSO of yyyy.com I get the mail account for user1 as [email protected] .....but the calid .. common as user1
    How I can get unique calid for users under two domains..
    whether I need to set Hosted domain support...Then how the mailid's differ with out using hosted domain support..
    And I need to login UWC without using @domain.com...
    Help me on this...
    Ashik

    Do you have UWC and Cal configured at least for virtual domain support?
    basically.. for discussion.. let's say you have three domains on your server.. 1st domain is the default domain. other 2 domains are virtual domains.
    if all domains were created with mail and cal support (-S mail,cal).. you would use the following options when creating users:
    1) for the default domain.. you must use the "-k legacy" option when adding users.
    2) for the other two domains.. when you create the user.. do NOT use a "-k" option.
    If you do not use the "-k" option.. it defaults to "hosted" which will cause the user's calid to be [email protected]
    If you Do use the "-k legacy" option.. it will create the calid as just "userid"
    With regard to logging into UWC without the @domain.com part of a username in a hosted domain.. the easiest way to avoid this.. is to point a host name under the hosted domain to the server.
    if you point webmail.xxxx.com to the server... and then access it via:
    http://webmail.xxxx.com/uwc/
    any users in the xxxx.com hosted domain will NOT need to use @xxxx.com when logging in... they can just use "userid"
    This feature does not take any special configuration (aside from adding a DNS entry for the hosted domain)
    Hopefully that helps.

  • Creating 50 users with SAME password

    All
    I need to create 50 Trainning users with SAME password.
    Does SAP allows to do it ? SU10 does not let me know
    enter the password ?
    Is there any report that I can use ?
    How can use SCAT trasaction to do this ?
    Please advise.
    Thanks
    From
    PT.

    Hi Pranav,
    Yes SAP allow you but for security reason its not recomended.
    But you can't give the password same like the username, SAP will not allow your to give password that contain userid.
    You can use SCAT to create the 50 user.
    First you recard the transcation first
    Than change the value with parameter (type &parameter_name)
    and than you can create a excel file that contain the 50 user.
    and use SCAT to run it.
    Please read:
    http://help.sap.com/saphelp_47x200/helpdata/en/f4/3f9ef659a711d1bc84080009b4534c/content.htm
    or
    http://help.sap.com/saphelp_47x200/helpdata/en/fd/f10538d6cb1e3be10000009b38f8cf/frameset.htm
    Regards,
    Fendi Suyanto

  • Kerberos Authentication - more than one user with same sAMAccountName

    I am configuring Kerberos Authentication on SAP AS Java. The single-domain SSO is done and working. Now I need to configure multiple domains in a domain forest. How to resolve issue regarding multiple users with same account ID (same sAMAccountName) under different domains?

    We thought about using the userprincipalname, but decided against it once we had the realization that if SPNego failed for any reason, and the user had to logon manually, they would not know their userprincipalname.  This was a wise decision, as SPNego does fail for a variety of reasons.  The most common is that there appears to be a 1-2 day timeout of the Kerberos ticket, and if a user leaves their computer on for that long, it will challenge them to logon manually.
    Andrew Castillo

  • How do you open a Numbers file sent from another Mac user with same operating system, i get a pop up that says I'm missing an index.hml file??? HELP PLEASE

    how do you open a Numbers file sent from another Mac user with same operating system, i get a pop up that says I'm missing an index.hml file??? HELP PLEASE

    The operating system may be the same but the Numbers applications are likely different.  You need to get the apps in sync.  Unfortunately, the Numbers (and Pages as well) saga is pretty confusing (and frustrating).  Here's some info from the iWork resident version expert (PeterBreis0807):
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Older versions of Pages 5 can not open files from later versions of Pages 5.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has removed almost 100 features from Pages 5 and added many bugs.

  • Restrict multiple log in with same user ID

    I have a JSF Project where I use Oracle JAAS for Login.
    The login works perfectly and also the components on the JSF page shows as per User Role. I am using OAS 10.1.3.3.
    I want to now implement the code so as to restrict simultaneous logins with the same user id. That is a user id cannot be looged in at once to the server from more than one machine.
    The login.html is:
    <form  name="loginFrm" method="post" action="j_security_check">
          <p>Log in to access restricted zone.</p>
          <table>
           <tr>
            <td>User name</td>
            <td>
             <input id="j_username" type="text" name="j_username"/>
            </td>
           </tr>
           <tr>
            <td>Password</td>
            <td>
             <input type="password" name="j_password"/>
            </td>
           </tr>
           <tr>
            <td> </td>
            <td>
             <input type="submit" value="Login" onclick="document.body.style.cursor='wait';"/>
            </td>
           </tr>
          </table>
         </form>The securityconfig int he web.xml file is:
    <login-config>
          <auth-method>FORM</auth-method>
          <realm-name>jazn.com</realm-name>
          <form-login-config>
             <form-login-page>/login.html</form-login-page>
             <form-error-page>/loginError.html</form-error-page>
          </form-login-config>
        </login-config>
        <security-role>
          <role-name>ADMINISTRATOR</role-name>
        </security-role>   
        <security-role>
          <role-name>MANAGER</role-name>
        </security-role>
        <security-role>
          <role-name>INSURER</role-name>
        </security-role>
        <security-role>
          <role-name>TRACKER</role-name>
        </security-role>
        <security-role>
          <role-name>INSURER_MANAGER</role-name>
        </security-role>

    Then I would say it is not possible:  Restrict multiple login in SAP Business Objects 4.0 SP6 for single user
    multiple login disable in BO | SCN

  • How can I share the apps that I have bought on iPhone? Both are with same user ID

    I have bought new iPad and have some apps that I want to share from iPhone. I am using the same user ID and wast able to figure out a solution for the same. Cn anyone guide me

    You can download the apps again on the iPad in the App Store - by tapping on the purchased tab and then find the apps and tap the cloud icon in order to download them again.
    If you want to add all of the app data and settings that you have already created on the phone for these apps - you will have to restore the iPad from the iPhone backup.
    You should transfer all apps on your iPhone and on your iPad in your iTunes library on your computer. The way to do that is, with your iPhone connected, at the iTunes menu bar go to File and select Transfer Purchases from - the name of your iPhone. Then do the same with your iPad before restoring your iPad from the backup for your iPhone.
    Follow the restore with a sync with iTunes to ensure that all of the apps and other content did transfer to the iPad.

  • Two profile two thunderbird at the same time with same user account

    Dear,
    I would use two Thunderbird at the same time for two different profiles with the same user accounts.
    I using linux OS.
    I was thinking of using:
    # thunderbird -P profile1 &
    # thunderbird -P profile2 &
    But when launching the second command nothing happens.
    Only brings in the foreground thundirbird already started.
    If possible use this configuration now or in the nex future?

    As a rule thunderbird only runs one instance of a profile.
    However, there are a couple of options you could try.
    You could use an addon to esily switch profiles:
    * https://addons.mozilla.org/en-US/thunderbird/addon/profileswitcher/
    there is more help here:
    * http://kb.mozillazine.org/Run_multiple_copies_of_Thunderbird_at_the_same_time
    It does say: 'Multiple instances is intended for debugging, so use it at your own risk'.
    One method would be to use: Start > Run
    "C:\Program Files\Mozilla Thunderbird\thunderbird.exe" -no-remote -P profilename
    there is a space before '-no'
    and also before '-P'
    followed by a space and the profile name
    You could create a shortcut/icon to run each separate profile.

  • "Accounting-Start" and "Accounting-Stop" with same "user name" and "session Id" recorded in different RADIUS servers.

    Hi,
    I have questions about "Accounting-Start" and "Accounting-Stop".
    1.If a NAS configured to have a primary and a backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the primary server goes down (Primary server won’t tell the NAS?). When sessions stop, the NAS sends the “Accounting-Stop” to the secondary. I understand the “Start-Stop” record with the same “user name” and “session-id” ideally should be recorded in the same server. If this situation happens what should both the NAS and RADIUS server do?
    2.A NAS configured to have a primary and backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the administrator decided to change the primary server (as there are problems with the previous primary). sessions stop, the NAS sends the “Accounting-Stop” to the new primary. This ends up the “Accounting-Start” and “Accounting-Stop” with the same “user name” and “session Id” in two RADIUS servers.
    To summarize, how to avoid the ”start-stop” pair ends up in different servers ? If it does, is it  an issue for RADIUS application ?
    Cheers,
    1.If a NAS configured to have a primary and a backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the primary server goes down (Primary server won’t tell the NAS?). When sessions stop, the NAS sends the “Accounting-Stop” to the secondary. I understand the “Start-Stop” record with the same “user name” and “session-id” ideally should be recorded in the same server. If this situation happens what should both the NAS and RADIUS server do?
    2.A NAS configured to have a primary and backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the administrator decided to change the primary server (as there are problems with the previous primary). sessions stop, the NAS sends the “Accounting-Stop” to the new primary. This ends up the “Accounting-Start” and “Accounting-Stop” with the same “user name” and “session Id” in two RADIUS servers.
    To summarize, how to avoid the ”start-stop” pair ends up in different servers ? If it does, is it  an issue for RADIUS application ?
    Cheers,

    vignesh and BalusC,
    following is the code in front controller's doFilter method. is this not thread safe?
            HttpServletRequest req = (HttpServletRequest) request;
            HttpServletResponse res = (HttpServletResponse) response;
            HttpSession session = req.getSession();
            somepackage.User user;
            if(session.getAttribute("user") == null){
                user = new somepackage.User();
                session.setAttribute("user", user);
            }else{           
                user = (somepackage.User) session.getAttribute("user");
            }user object maintains all information about a user. if it is in session scope, everything should work fine.
    another observation is after some time of usage, both people in different systems are getting same session.getId()
    in my logout page i am using
    session.invalidate();
    thanks,
    moses

  • How to create new user, with same personal files, for troubleshooting?

    I cannot find this answer in "Finder Help", nor in the Community discussions thus far. What I must do to troubleshoot the spinnign beach ball: My next step: I must troubleshoot my friend's iMac running Mac O.S 10.6.8 by setting up a new user, called "Test". This I can do easily. However, what I am unsure of is this: as this "new user", actually just me as a tester, I must be able to access the same email, Word files, Desktop, photos, etc. that I used to access. How, then? Copy all into a shared folder or what? There must be a less cumbersome way. I do NOT wish to delete anything. Of course, I have justmade a perfect backup of everything on my hard drive. Please advise re my next step: sharing the "User" little house files, with myself, as the new, possilbly temporary, user. Thank you so much, anyone and everyone!

    You shouldn't do any of that for troubleshooting. The test user account should be pristine. If you copy stuff from the old account, then you also copy whatever is causing a problem.
    Just use the Accounts/Users & Groups preferences to create a second user called, "test." Make this user an admin user. Then log out of the old account and log into the new one. That's it. You can still access and use applications in the Applications folder if you need to test third-party applications.
    We could be more helpful if you explain just what you need to troubleshoot. If just the spinning beachball is your issue, then visit The XLab FAQs and read the FAQ on resolving the SBOD problem.
    If the computer is simply running slowly then read the following:
    Things You Can Do To Resolve Slow Downs
    If your computer seems to be running slower here are some things you can do:
    Start with visits to:     OS X Maintenance - MacAttorney;
                                      The X Lab: The X-FAQs;
                                      The Safe Mac » Mac Performance Guide;
                                      The Safe Mac » The myth of the dirty Mac;
                                      Mac maintenance Quick Assist.
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    Repair the Hard Drive - Lion/Mountain Lion/Mavericks
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
    Suggestions for OS X Maintenance
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
    Helpful Links Regarding Malware Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
              Mac OS X Snow Leopard and malware detection
              OS X Lion- Protect your Mac from malware
              OS X Mountain Lion- Protect your Mac from malware
              About file quarantine in OS X
    If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
    Troubleshooting Applications
    I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
    If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
    Basic Backup
    For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
    1. A Time Machine preferences panel as part of System Preferences;
    2. A Time Machine application located in the Applications folder. It is
        used to manage backups and to restore backups. Time Machine
        requires a backup drive that is at least twice the capacity of the
        drive being backed up.
    Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Referenced software can be found at MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Pre-Mavericks
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Mavericks and later
    Open Activity Monitor in the Utilities folder.  Select All Processes from the View menu.  Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • Prompt user for input when rdp with same user as logged in

    What I am trying to achieve: user dragos is logged in on a domain computer. When I connect with rdp with the username dragos on the computer I want user dragos to be asked if he allows the connection or not not to be taken over.
    When you connect as different user it is being asked, but not when connecting as same user as logged in.
    Searching for solutions I found this: Administrative Templates\Windows components\Remote desktop services\Remote desktop session host\Connections\Set rules for remote control of Remote Desktop Services user sessions and give it Full control with user
    permission.
    But it does not work as I was expecting.
    Is there a solution for the logged in user to be promped if connecting with the same user name ?
    Thank you

    Hi,
    user dragos is logged in on a domain computer. When I connect with rdp with the username dragos on the computer I want user dragos to be asked if he allows the connection or not not to be taken over.
    As far as I know, there is no built-in method to achieve this.
    You may try to search whether there any third-party tools which can achieve this, or write a script.
    If you need assistance with scripting, here are some scripting forum links below for you:
    The Official Scripting Guys Forum
    http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
    Windows PowerShell Forum
    https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverpowershell&filter=alltypes&sort=lastpostdesc
    MSDN Forums
    https://social.msdn.microsoft.com/Forums/en-US/home
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • N9, multiple caldav sync entries with same user na...

    Hi, With N9, is it possible to create multiple CalDAV accounts with the same user name? I am asking this because with Google calendar I have shared calendars with family members, and it is possible to sync to these calendars using my own Google account and with a specific server path. I would just need to have several CalDAV entries in order to sync to each of them? (I am currently using CalDAV to sync to my wife's calendar and Mail for Exchange for my own gmail account but I don't quite like this.) On my previous phone I used GooSync which handled all this, but I don't yet know is it possible to use that with N9. Eero
    Solved!
    Go to Solution.

    posting this here as this is just about the top Google search hit:
    Check the URLs suggested here:
    http://forum.meego.com/showthread.php?t=3729
    Quote: 
    The URL for your main calendar should be: https://www.google.com/calendar/dav/ The URLs for additional calendars should be: https://www.google.com/calendar/dav/[email protected]​endar.google.com/ In both cases the trailing slashes are important. The '@' must not be URI escaped (i.e. '%40'). The long UUID can be found on the individual calendar settings panels, and on the Google page above. 

Maybe you are looking for