2 Way Match - PO and Invoice (no goods receipt)

Dear Gurus,
We need to Implement the 2 Way Match process between the Invoice and the PO i.e. perform the Match once invoice has been recorded. The condition is invoice value should be less than $500. This means supplier will be paid irrespective of a goods receipt for a PO line. The goods receipt can happen later to close a PO line.
Please see below examples which will fall under this criteria.
PO # A
Line # 1 - Qty = 10 - PO unit Price = 100 - PO Total = 1000
Inv Qty = 4 - Inv line Total = 400 - Inv Grand total = 400
PO # B
Line # 1 - Qty = 5 - PO unit Price = 80 - PO Total = 400
Inv Qty = 5 - Inv line Total = 400 - Inv Grand total = 400
PO # 3
Line # 1 - Qty = 5 - PO unit Price = 100 - PO Total = 500
Line # 2 - Qty = 10 - PO unit Price = 10 - PO Total = 1000
PO total = 1500
Invoice Line # 1 - Inv Qty = 5 - Inv line Total = 400 - Inv Grand total = 400
Can these be achived by some setups?
Is there a way by which we can achieve this?
Thanks for your response in advance.

Hi Venkat,
Thanks for the swift response.
In fact we will be doing GR but at a later date. The object is to not held the vendor invoice and payment (esp. for small amt) just bcoz goods reception not done. Understand your concern that GR/IR might cause an issue.

Similar Messages

  • Blocking A/P Invoice  without Good Receipt PO

    Dear Sir/Madam,
    Are there any ways to block AP Invoice without creation of Good Receipt PO? The Purchase user whom I want to control need to create PO and AP Invoice. Good Receipt PO is done by warehouse.
    My version is 8.81 PL 06.
    Thankyou.

    hi,
    yes it is possible by using the Store Procedure SP_TranactionNotification.
    pls. use the ff. code
    if @object_type = '18' and @transaction_type ='A'
    begin
         if exists (select T0.itemcode from PCH1 T0 where T0.basetype = '-1' and T0.docentry = @list_of_cols_val_tab_del)
    begin
              set @error = 1
              Set @error_message = 'A/P Invoice Cannot be raised without GRPO Reference'
         end
    end
    open your SQL Management Studio Select your database -->> Programmability -->> StoredProcedure -->> SP_TranactionNotification right click and modify. then you can find
    --     ADD     YOUR     CODE     HERE
    below this one you put the code i provide above and check it.
    regards,
    Fidel

  • Report on Invoices without Good Receipts

    Hi,
    Are there any standard SAP reports that I can extract logistics invoices without good receipts done?
    Thanks,
    CW

    Hi,
    Logistics / Materials Management / Purchase Order / List Displays / ********
    or use FBL3N - Display/Change Line Items, select GR/IR account and exclude the GR document type.
    Paul

  • How to maintain a check for 3 way match(PO, GR, Invoice) in SRM

    How to maintain/configure a check for 3 way match(PO, GR, Invoice) in SRM

    Hi Sam,
    Please use a Limit cart and select the radiobutton "Confirmation and Invoice" which will need a GR/Confirmation before Invoice on a PO.
    Please reward points if the hint is helpful.
    Thanks & Regards,
    Venkat

  • Enter Invoice before Goods Receipt

    Hi
    I have scenario:
    I receipt Invoice and I want to enter invoice to SAP system.
    After goods coming, I will receipt goods by MIGO.
    I want to enter MIGO reference to invoice above.
    Regards,

    Hi
    You can do it , but if you carry out Invoice before Goods receipt then how will have the reference of the GR during it?
    To carryout this , you have to remove the GR_bsd IV indicator in Invoice Tab of  Purchase order.
    You may have this indicator flowing to PO for the vendor from the Purchasing view of vendor mastr data
    You can carry out GRN later but can not have any reference to the it in the Invoice already processed.
    Regards

  • Creating Invoice from goods receipts PO

    Is posible create a invoice using all goods receipts PO to one provider, or is necesary create one invoice by goods receipt PO document?

    Hi
    I didn't understand what you mean but my guess is
    You want to merge multiple GRPO into One invoice ..
    If I am correct ,
    Document Generation wizard is only available in A/R module side
    You can take a look at this  from Sales A/R> Document generation wizard
    But.. You can use  Copy from  to merge multiple document and convert into one if it is one provider .
    on purchase order side
    Hope this helps
    Bishal

  • Capture excise invoice before goods receipt

    Do we have any advantages of capturing excise invoice before goods receipt ?

    In terms of distribution of labor, yes. It gives more control to the excise personnel in your org rather than allow the control to the stores personnel who may or may not have sufficient knowlegde to handle these legal documents.

  • Way to check who created PO and input the Goods Receipt?

    SAP Experts
    A question to you all.  Is there a way/report/number of tables to validate which user ID create or changed a Purchase Order and if they also entered the Goods Receipt?  We want to be able to check this on a monthly basis as a management check.
    Thanks
    Denise

    If you need report for the same then you can check ME2N - dynamic selection - drop down Purchasing document header - select Created by field and enter User ID(or list of User ids) for which you want to see POs created.
    MIGO Display - Doc Info can give you the User who created.
    If you want other way round then you can use tables as suggested above:
    EKKO for PO
    MKPF for MIGO
    RBKP for MIRO
    Thanks,
    Praveen.

  • 3-Way Match with Multiple Invoices

    This may be a basic Oracle iProcurement functionality question, but i have been unable to get a good answer. Any information will be greatly appreciated.
    I am currently using Oracle 11i iProcurement.
    The problem I am having is I am unable to perform a 3-way Match in the system on purchase orders that will use multiple invoices. Our vendors require a tiered payment structure (i.e. 50% due up front before shipment, 30% due when item has reached shipment destination, and 10% due after our engineers have inspected the shipment).
    We have been currently using a 2-way match for all of our purchase orders because when we apply the first invoice against the PO (50%), the PO will automatically close before we can receipt the goods against the purchase order.
    Our Invoice Receipt Close % Tolerance and Invoice Close % Tolerance are set at 0%.
    Our goal is to receipt the first 50% against the purchase order, have the PO remain open, and receipt the goods in Oracle after the 2nd or 3rd invoice application against the PO.
    Thanks in advance.
    Edited by: user13053863 on Apr 28, 2010 2:44 PM

    Hmm, an interesting situation. What are the quantities on your purchase orders? Are they almost always a quantity of 1? Payables should only close a purchase order when quantity billed and quantity received is GT or equal to the quantity ordered. So if you order a quantity of 10, you could match for quantity 5 on the first invoice, quantity 3 for the second invoice, and quantity 2 for the final invoice. But since you don't receive the quantity until the 3rd invoice, you cannot match on receipts, so that would be a problem.
    Maybe you need to approach this from a different angle? Maybe you should look at the prepayments ability in Payables. Typically Prepayments will be charged to a Prepayment Account (asset). Say you have a purchase order for $10,000. You prepay $5,000 up front, so basically Debit Prepayment 5,000 and Credit Cash 5,000. Same for the next prepayment level - $3,000. Then you get the ordered material received. So you want to do an invoice for $10,000. Match the invoice to the purchase order. Apply the prepayments to the purchase order. Thus you get an entry something like Debit Inventory $10,000, Credit Prepayments $8,000, and Credit Cash $2,000.
    From an accounting perspecitive, you don't show the prepayments in inventory until received, but do show a prepayment asset. Which is reflecting what you really are doing I think.
    I have never worked for anyone who has had to do prepayments, but this is an area that you may wish to investigate as a possible solution for your situation. Good luck.
    John Dickey

  • EDI Invoice before Goods receipt

    Hello ,
    Purchase orders are created in the system with GR based IV checked and the purchase orders are sent by EDI to the vendor .
    The vendor ships the material and also send the EDI invoice . Since GR is not posted in the system by that time , EDI invoice is failing in our system .
    We have explored the option of  turning  off GR based IV and have only GR checked so that Goods receipt and Invoice receipt can happen in parallel.. but business wants to have GR based IV .
    Is there a way to delay the posting of EDI invoices in our system ? It is not a perfect solution , but this will minimise the EDI invoice failures in our system .
    Thanks
    Mani

    Hello,
    This is a common situation faced by many custmers. EDI Invoices can be created without GR. So LIV fails. This can reset for LIV (RKBP-RBSTAT = 1) by using MIR6. You can automate this by developing and running a custom program for MIR6 prior to LIV job. 
    Thanks,
    Venu

  • Incoming invoice before goods receipt

    Hi friends.
    In the standard process of VMS the action for good receipt (GORE) is executed before the action for incoming invoice (INIV).  Is there the possibility of doing the way inverse (INIV before GORE).  I know that the vehicle belongs to the material type VEHI with valuation category X so it is a single batch.  And the batch is created at goods receipt so I'm not quite sure if it is possible to register the incoming invoice previous to the goods receipts.
    Thanks.
    Pedro

    Hi Pedro,
    in VMS, the batch is not created when the goods receipt (GORE) is executed. The batch is created at an earlier point of time: It happens during vehicle creation (CREA) already. If you don't create the vehicles via CREA but via CRE1, the batch is not yet created yet but in this case action REAL (which is in this case supposed to be executed prior to ORD1) creates the batch. All this statements are true for the valuation type creation as well.
    The VMS actions and the VMS framework in my opinion don't enforce the action sequence GORE->INIV. From a VMS perspective, INIV->GORE is possible as well. Of course you need to set up the action matrices in a way that this is allowed.
    It's the standard MM settings which need to be done in a way that INIV->GORE is possible. As far as I know you have to make sure that in the vendor master (view "purchasing data") the "Indicator: GR-Based Invoice Verification"-flag is NOT set. The same flag also exists in the info record (ME12) where it also needs to be removed.
    I don't know if further customizing and / or master data settings in MM is required to enable INIV->GORE.
    Kind regards,
         Steffen

  • Invoice before Goods Receipt in Intercompany

    Hi all!
    We are setting up the Intercompany Purchasing between B1 and R/3 with local stock.
    In this scenario, a delivery sent from R/3 creates a draft goods receipt in B1. When the goods arrives you must manually open the draft goods receipt and add it as a "real" goods receipt. This will do the actual posting to the inventory.
    When R/3 creates the invoice, it will become a purchase invoice in B1.
    At this moment it is assumed that the draft goods receipt is stored as a "real" goods receipt as the purchase invoice will be based on the goods receipt.
    If the goods receipt doesn't exist, the purchase invoice will have no base reference and a posting is done to the inventory by the purchase invoice. If you later creates the "real" goods receipt (when the goods arrives), you will make a new posting to the inventory and you end up with:
    a) doubled inventory
    b) goods receipt with no target
    c) purchase invoice with no base document
    To prevent this I think the solution is to ensure that the invoice in R/3 is not created before the "real" goods receipt is created in B1.
    What is the best practice to ensure this?
    Regards
    Lars Jönson

    Hi Lars,
    to be able to post the purchase invoice into B1, it's a prerequisite that a base document (goods receipt) was created and posted. In the standard scenario "local stock" B1iSN does not add an purchase invoice without an existing base document "goods receipt".
    B1 raises an DI error "Base Document mismatch..." and B1iSN will take the purchase invoice message into the B1iSN error inbox.
    This is how the scenario is defined.
    To be able to post the invoice into B1, you can activate an error action for all invoicing messages named "Mark4AutomaticRetrial" within B1iSN. Now you can resend these messages out of the B1iSN error inbox automatically using the maintenance option B1iSN Tools -> Action Handling -> Cfg DA: Automatic Resend once an hour or once a day.
    With this option the invoices will be posted automatically, when the B1 draft  document is transferred into a goods receipt posting (after the items arrived physially and the quality checks are done).
    Best regards
    Bastian
    P.S.: you can find details how-to set up error action in B1iSN Guide 05 - Operations, chapter 2

  • Create PO related invoice - before goods receipt/confirmation

    Hi all, sorry to ask this very basic question as our system is not working at the moment and I cannot test this out and have very little experience creating PO related invoice in SRM.
    First of all, we are operating on SRM 4.  I would like to find out whether it is possible to create an invoice with reference to a PO before we create the goods receipt.
    The reason why I ask this question is because I was reading up on the IMS functionality that is available from SRM 5 onwards and it listed the functionalities that are available that weren't in the earlier releases. One point mentioned was on the ability to receipt invoice prior to confirmation of goods receipt. I also read from the help document that we can enter invoice with reference to PO for which confirmations have already been entered or for which no confirmations are expected. There is no mention on situations when the confirmation is not done yet.
    Appreciate your advice on the above.
    Cheers!
    SF

    Sorry all, I think I am confusing everyone. May be it's because the question is too basic. There is nothing fancy with the PO here. It's a PO initiated from SRM with goods receipt and invoice receipt indicator turned on BUT NOT GR-BASED invoice indicator. I just want to know whether it is possible for me to create an invoice with reference to the PO in SRM if I have not yer done the goods receipt. If I do this in ECC/R3, the invoice would have been blocked (if tolerance allowed).
    Even though I know that this should be possible in SRM but because some statements in the SAP help documentation sort of implies that it might not be the case and I do not want to assume it. Plus I have not worked with creating PO related invoices in SRM before and so just want to confirm that it is working. It doesn't help when I was trying to test this scenario in our own system that the system outputs a message relating to backend communication not working.
    However, I finally got a chance to test this in another client' site and found that it is possible to create an invoice with reference to a PO even before the goods receipt is posted. Though I have yet to find out why I am getting a different error in our own system, I am happy for now that it is working.
    Thanks all for your reply!
    Regards
    SF

  • GR into 'blocked stock'  and GR into ' Goods receipt blocked stock'

    Hellow!
    I am to implement  2 scenarios
    1.  "GR into Goods receipt blocked stock"
    2. 'GR into Blocked stock'
    We use GR via shipment (movement type 101 , stock category ' ' ).
    1 . I have tried to change stock category in delibery but fiels is locked. How could I set 'S' category for blocked stock to recive in 'Blocked stock'
    2. How could I recive into ' Goods receipt blocked stock'?
    Thank you for answers.
    Andrey Garshin.

    Hi Andrey,
    I think the only way to do GR to GR blocked stock is in the GR confirmation from WMS (IDoc SHP_IBDLV_CONFIRM_DECENTRAL if you use DWMS, IDoc MBGMCR or WMMBXY if you don't use DWMS). Assign the movement type (BWART) = 103 in the IDoc. Please note that the stock type would better to be coordinated between the WMS and SAP, i.e. it is the WMS that shall say "I received the goods into the GR blocked stock" and only in such case you will map it into mvt type 103 in SAP.
    For the normal blocked stock, I would suggest you to try setting this in the PO, tab "Delivery". Do it before you create the inb. delivery and see if it helps. If not, then you have the same option as for the GR blocked stock, set the stock type to S in the incoming IDoc.
    BR
    Raf

  • Automating creation of invoices thorugh goods receipt

    Hi,
    In case of third party scenario, as soon as the vendor dispatches the material to the  customer, we need to raise an invoice on the customer. i think it is a sales order related invoice.
    How can I automate the creation of sales order related invoice as soon as goods receipt is done in system ?
    regds

    Hi,
    1. Create a output type for Goods Receipt for automatic invoice create purpose. Let this output get triggered upon saving the GR.
    2. In output routine/exit call the function module  'RV_INVOICE_CREATE'"  to create billing document automatically.
    This is one way of automation.  You can also look for GR user-exits.
    Regards,
    Rajesh

Maybe you are looking for

  • Lost Documents folder

    While transferring the data from an older MacBook to a new MacBook Air using the backup on a Time Machine, I lost my "Documents" folder from the dock.  I then tried to click and move the "Documents" folder from the "Favorites" on the left side of the

  • Upgrading to camera raw 6.7

    I get an error message when I try to upgrade CS5 to camera raw 6.7 for the mac. Has anyone faced this issue?

  • File Content Conversion in PI 7.1

    Hi I am working on File (Input file is text file) to Proxy scenario where sender sends the file, Please find the sample data, 1st record is header and last one is trailer, and 2nd and 3rd record formats are different, File will have 2nd and 3rd forma

  • Playing aps on TV.

    I bought instructional videos which were installed as APS.  They play ok on the ipod but when I use an AV cable to play them on TV there is sound but no picture.  Other videos and photos look fine on TV using the same cable.

  • DVDs that worked on the older computer get spat out in the macbook pro

    My imac G4 could pretty much only read and write on Sony DVD-R Ver. 2.0/1x-8x. It could write on TDK DVD-R 8x but not read it. Now the new macbook pro can read the TDKs with out any problems but not the many SONY dvds that I have been using on the im