2002 Updation using MOD -Operation.
when we try to update the 2002 infotype using HR_INFOTYPE_OPERATION
it is saving the STDAZ field value as 24
when I pass any value in STDAZ through my frontend?
is typing a message.
: for ex: 1,2,3,4,5,6,7, or 8
For Updation we are using MOD -Operation.
Hi,
STDAZ is automatically calculated from the difference btw BEGUZ and ENDUZ fields.
If you donot fill these fields bur specify STDAZ instead, the system takes the attendance as 1 day and make STDAZ as 24 hours.
Pls use BEGUZ and ENDUZ fields instead of directly updating STDAZ.
Regards,
Dilek
Similar Messages
-
My table Name is
DESC FUNCTIONS
Func_Id VARCAHR2(15)
dESCRIPTION VARCAHR2(100)
fLAG VARCHAR2(1)
This table is haivng the following data
SA100
SB100
SA105
SB105
SC105
SA200
SB200
SA205
SB205
SA300
SB300
I want to implement the below update
Update functions set flag = 'Y' where func_id like 'S%100'
Update functions set flag = 'Y' where func_id like 'S%200'
Update functions set flag = 'Y' where func_id like 'S%300'
How can i implement the above 3 SQLs into a Single SQL statement?
How can i merge the above 3 SQls into a Single SQL?You could also use regexp_like:
with functions as
select 'SA100' func_id from dual union all
select 'SB100' func_id from dual union all
select 'SA105' func_id from dual union all
select 'SB105' func_id from dual union all
select 'SC105' func_id from dual union all
select 'SA200' func_id from dual union all
select 'SB200' func_id from dual union all
select 'SA205' func_id from dual union all
select 'SB205' func_id from dual union all
select 'SA300' func_id from dual union all
select 'SB300' func_id from dual
select * from functions where regexp_like(func_id,'^S.*[123]00$')
Update functions set flag = 'Y' where regexp_like(func_id,'^S.*[123]00$'); -
How to use the mirrored and log shipped secondary database for update or insert operations
Hi,
I am doing a DR Test where I need to test the mirrored and log shipped secondary database but without stopping the mirroring or log shipping procedures. Is there a way to get the data out of mirrored and log shipped database to another database for update
or insert operations?
Database snapshot can be used only for mirrored database but updates cannot be done. Also the secondary database of log shipping cannot used for database snapshot. Any ideas of how this can be implemented?
Thanks,
PreethaHmm in this case I think you need Merge Replication otherwise it breaks down the purpose of DR...again in that case..
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
iPhone 5, updating using iTunes, iphone could not be updated, error code 3014, iphone is in recovery mode, I have re-installed iTunes twice and each time got the same message
Error 3014
This error occurs when iTunes can't reach gs.apple.com in a timely fashion. Follow the steps below to contact the iOS software update server gs.apple.com. -
XSODATA CRUD Operations (Update using not working)
this one works:
service namespace "My.Service" {
"Schema"."Package::Table" as "Table" keys generate local "ID"
create using "Package::SP_MySP";
this one doesn't work:
service namespace "My.Service" {
"Schema"."Package::Table" as "Table" keys generate local "ID"
update using "Package::SP_MySP";
I am getting a syntax error on the update using statement in the odata service definition.key field means unique record.
if u try to change a key field it will add a new entry.
to an existing entry with a key combination u can change only the non-key fields.
else u need to delete the record combination and add the new combination. -
When I try to update my software, I'm receiving the error message "Failed to check for updates. The operation couldn't be completed. Operation not permitted."
I'm using Safari 4.0.3. Yes, I know this is an old version of Safari - I can't update it, or any other software on my MacBook. Should I just wait for the Lion OS, or is there any kind of fix a non-technical Mac user like me can attempt without screwing up her laptop?
I've tried clearing my cache and resetting Safari already - doesn't help. I've also tried to update after disabling my (Norton) antivirus software, thinking that might be interfering. None of these help.
I don't know if it's a related problem, but also I can't download .pdf files from the internet, although I used to be able to.You should use the NortonAV uninstaller to uninstall it. Disabling the dreadful thing in the past hasn't always been sufficient for it to cease creating system havoc. The Mac NortonAV version has a long and well-earned reputation for doing truly seriously nasty things to OS X. Shame on Comcast for inflicting NortonAV on its Mac customers. It's not a matter of if NortonAV will mess up OS X but when and how badly. I can't help but wondering if some setting in your Norton AV has decided that NortonAV, rather than you, will be making executive decisions about what you are allowed to install on your computer and is keeping that fact a secret.
After you are done uninstalling Norton use the finder to search for any Norton files that the uninstaller might have missed. Add the option to search for invisible files.
After you have removed all the Norton bits and pieces restart in safe mode by holding down the shift key right after the startup chime. Keep holding down the shift key until you see the Apple logo and spinning gear. Safe mode does some maintenance tasks which means a much longer than normal startup time. Use Disk Utility to repair permission
If your Mac works normally in safe mode restart. If things still aren't fixed you might want to give another shot at reinstalling Snow Leopard from the install DVD and applying the Mac OS X 10.6.8 Update Combo before taking your Mac to the Apple Store.
If you feel the need to run AV software on your Mac use ClamXav in manual mode. It's donationware and doesn't seem to cause the litany of weird problems that are associated with other AV software. -
If you are attempting to update using a Mac or PC with which you do not normally sync
what happens when "If you are attempting to update using a Mac or PC with which you do not normally sync", & they say in step 2 or 3 in order not to loose your stuff "If you are updating your iOS device on a computer with which you do not normally sync , or if you disconnect your device before the sync process is complete, you may notice that some media content that was previously on your device is no longer there. You can restore this content by syncing with the Mac or PC with which you normally sync."
now what if the pc that was originally used to sync my ipod , has corrupt or bad systems files that are causing it from working correctly...? when i plug it in to the o.g. operating sysytems (win xp) it doesnt ever recognize or discover the ipod through itunes. the pc will pop up the "cameras been plugged in, what would you like to do...?" but nothing thru itunes. now if i reboot & run the windows 7 operating system w/itunes that has backed my ipod before & synced a few times as well, but not the o.g. op system used from the beginning (the very initial set up done on the ipod) it works fine, but DOES give me the warning "updating to 5.0 willdelete some of your apps & media, including ... ....will only preserve contacts, calenders," ....etc.
MY HUGE CONCERN IS if i do hit update & go through w/it, & not having been able to sync it to the one normally used to sync my ipod, will that back up i made be able to restore my game seetings, GAME SAVES, & data achievement type information....?
please, i'm very hesitant to go through w/it, so if you can please help me out here & let me know asap.....i canimagine you're all busy busy, so i thank you for your time here w/this
thank you
mike z
[email protected]Not that hard. One the computer you are using do the following:
- Transfer iTunes purchases.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- Transfer other music using a third-party program like one of those discussed here.
Copy music
- If you have synced photos you need a paid program like TouchCopy or PhoneView
- When all the media in on the computer, connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup.
That computer is now your syncing computer. Note that the iPod backup that iTunes makes does not included synced media like apps or music. -
ITunes 8.1 (Win) + 5G iPod: disk use mode now always on
After recently updating to iTunes 8.1.0.52 (Win XP Pro SP3), my 5th Gen. iPod always mounts in disk use mode no matter how I have set the "Enable Disk Use" prompt in iTunes.
At mount, I always see a new drive letter assignment with the default iPod disk folders (Calendar, Contacts, Notes) visible and writable. The normally hidden iPod_Control folder also is visible on my system due to my OS settings. I have not tested its writability.
This drive assignment is visible only during the initial iPod sync, after which it disappears.
It does not reappear on subsequent syncs within a given "mounted session," but does reappear if I disconnect the iPod (always manually, regardless of disk use setting) and then reattach the dock adapter cable.
Always, the drive assignment persists only so long as the sync is active.
The iPod itself is at software version 1.3, and has been since that version was launched in 2008(?).
Naturally, I suspect a software problem in iTunes 8.1.
The ability to mount an unauthorized drive can potentially give rise to serious security issues, especially when there appears to exist no option NOT to mount the drive. Thus, I mention it here for the record.
James A.
Asheville, NCHey there, I'm having the exact same problem! Very annoying - have you found a solution by any chance?
I've restored my ipod and reset everything I can but since I updated the software continuous mode is kaput......Cheers -
I was trying to update my ipad operating system and I thought it was done. When I disconnected it from my computer the ipad went blank then the apple logo appeared midscreen with an elongated oval across the screen under it. Now nothing on the ipad works. I think it was backed up on my computer but I can't find anything that will allow me to sync the two or regain functionality on my ipad. Any suggestions?
Hi,
I would put the ipad in recovery mode and redo the update, once that is done you could restore the ipad from your backup and you would not lose any data.
http://support.apple.com/kb/ht4097
Ricc -
How to pass system date and time with tabular from in Update only Mode.
Dear Friends,
i have created tabular form with UPDATE Only .here i am assigning work to another multiple users.i want to insert system date and time when i assign work to multiple users.
How can i insert system date and time into table using tabular form in Update Only Mode.
beacuse i have pass in default system date it's working only with add row button.
How can i pass system date and time in update mode in tabular form.
ThanksHi,
You just create a trigger on the table on which you build your tabular form:
e.g:
CREATE OR REPLACE TRIGGER "AUDITING"
before insert or update on "MYTABLE"
for each row
begin
if inserting then
:new.created_on := localtimestamp;
:new.created_by := nvl(v('APP_USER'),user);
elsif updating then
:new.updated_on := localtimestamp;
:new.updated_by := nvl(v('APP_USER'),user);
end if;
end;Regards,
Fateh -
'Update' maintenance mode in transaction PRAA
Hi,
We are trying to create an employee vendor using the transaction PRAA by selecting the 'Update' maintenance mode.
The issue is that the clerk's email address is being copied from the reference vendor if the personnel does not have an email address maintained in the HR records.
Please could you let me know if this is the standard functionality.
Thank you.Hello
Not sure that is a standard functionnality. You should check user-exit and BAdIs implemented in your system for PRAA... (there is 2 exit).
If not you should open an incident to SAP because it doesnt looks like very clean to me to copy the email from template. -
Update/Insert mode couldn't apply to SQL Server source via Transparent Gateway.
Hi all,
OWB version is 9.0.2.56,database version is 9i Release 2.
When set load type to "Insert",mapping works fine from SQL Server to Oracle table,via Transparent Gateway 901.
But "Update/Insert" always runs error with "Fatal error or maximum number of errors exceeded".while I define both source and destination table to oracle tables in mapping,"Update/Insert" works file.
Any suggestion?Hi Ignor,
Thanks for your reply!
The SQL Server version is SQL Server 2000.
I just want to ETL data from a SQL Server table via Transparent gateway into oracle table,the source table has a increment seq field,so I want to define mapping using update/insert loading method in OWB,according to this seq field,if there is the same seq in the target table,do update,if not,insert the row.I just find out that if I use a middle table in oracle to do truncate/insert mode from SQL Server source table,then do update/insert mode from the middle one to target table,it works.But can't do directly from source to target using update/insert mode.Does this means update/insert mode only apply to mapping from local table to local table?
Regards,
Robbin -
Sessions/connections gets hang during update and select operations.
A table with 3 million records, which has customer details data.
Everyday application is executing select and update queries on that table.
Sessions/connections gets hang during update and select operations.
After checking ADDM report, following are the findings:
Please suggest the solutions
Findings and Recommendations
Finding 1: Row Lock Waits
Impact is 145.22 active sessions, 99.77% of total activity.
SQL statements were found waiting for row lock waits.
Recommendation 1: Application Analysis
Estimated benefit is 145.22 active sessions, 99.77% of total activity.
Action
Significant row contention was detected in the TABLE
"AVAYA.AIRTEL_CUSTOMER_MASTER" with object ID 82155. Trace the cause of
row contention in the application logic using the given blocked SQL.
Related Object
Database object with ID 82155.
Rationale
The SQL statement with SQL_ID "974vg65j29pmv" was blocked on row locks.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The session with ID 50 and serial number 34525 in instance number 1 was
the blocking session responsible for 100% of this recommendation's
benefit.
Symptoms That Led to the Finding:
Wait class "Application" was consuming significant database time.
Impact is 145.22 active sessions, 99.77% of total activity.
Finding 2: Top SQL Statements
Impact is 46.39 active sessions, 31.87% of total activity.
SQL statements consuming significant database time were found. These
statements offer a good opportunity for performance improvement.
Recommendation 1: SQL Tuning
Estimated benefit is 46.39 active sessions, 31.87% of total activity.
Action
Investigate the UPDATE statement with SQL_ID "974vg65j29pmv" for
possible performance improvements. You can supplement the information
given here with an ASH report for this SQL_ID.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The SQL spent only 0% of its database time on CPU, I/O and Cluster
waits. Therefore, the SQL Tuning Advisor is not applicable in this case.
Look at performance data for the SQL to find potential improvements.
Rationale
Database time for this SQL was divided as follows: 100% for SQL
execution, 0% for parsing, 0% for PL/SQL execution and 0% for Java
execution.
Rationale
SQL statement with SQL_ID "974vg65j29pmv" was executed 212 times and had
an average elapsed time of 2494 seconds.
Rationale
Waiting for event "enq: TX - row lock contention" in wait class
"Application" accounted for 100% of the database time spent in
processing the SQL statement with SQL_ID "974vg65j29pmv".**addm report **
ADDM Report for Task 'TASK_7526'
Analysis Period
AWR snapshot range from 5003 to 5004.
Time period starts at 08-JUL-13 11.00.27 AM
Time period ends at 08-JUL-13 12.00.45 PM
Analysis Target
Database 'AVAYADB' with DB ID 2878789264.
Database version 11.2.0.1.0.
ADDM performed an analysis of instance avayadb, numbered 1 and hosted at
NG-LA04AVAYA01.
Activity During the Analysis Period
Total database time was 563062 seconds.
The average number of active sessions was 155.63.
Summary of Findings
Description Active Sessions Recommendations
Percent of Activity
1 Row Lock Waits 155.44 | 99.88 1
2 Top SQL Statements 26.67 | 17.14 1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Findings and Recommendations
Finding 1: Row Lock Waits
Impact is 155.4 active sessions, 99.88% of total activity.
SQL statements were found waiting for row lock waits.
Recommendation 1: Application Analysis
Estimated benefit is 155.44 active sessions, 99.88% of total activity.
Action
Significant row contention was detected in the TABLE
"AVAYA.AIRTEL_CUSTOMER_MASTER" with object ID 82155. Trace the cause of
row contention in the application logic using the given blocked SQL.
Related Object
Database object with ID 82155.
Rationale
The SQL statement with SQL_ID "974vg65j29pmv" was blocked on row locks.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The session with ID 167 and serial number 6084 in instance number 1 was
the blocking session responsible for 100% of this recommendation's
benefit.
Symptoms That Led to the Finding:
Wait class "Application" was consuming significant database time.
Impact is 155.45 active sessions, 99.88% of total activity.
Finding 2: Top SQL Statements
Impact is 26.66 active sessions, 17.14% of total activity.
SQL statements consuming significant database time were found. These
statements offer a good opportunity for performance improvement.
Recommendation 1: SQL Tuning
Estimated benefit is 26.67 active sessions, 17.14% of total activity.
Action
Investigate the UPDATE statement with SQL_ID "974vg65j29pmv" for
possible performance improvements. You can supplement the information
given here with an ASH report for this SQL_ID.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The SQL spent only 0% of its database time on CPU, I/O and Cluster
waits. Therefore, the SQL Tuning Advisor is not applicable in this case.
Look at performance data for the SQL to find potential improvements.
Rationale
Database time for this SQL was divided as follows: 100% for SQL
execution, 0% for parsing, 0% for PL/SQL execution and 0% for Java
execution.
Rationale
SQL statement with SQL_ID "974vg65j29pmv" was executed 707 times and had
an average elapsed time of 794 seconds.
Rationale
Waiting for event "enq: TX - row lock contention" in wait class
"Application" accounted for 100% of the database time spent in
processing the SQL statement with SQL_ID "974vg65j29pmv".
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Additional Information
Miscellaneous Information
Wait class "Commit" was not consuming significant database time.
Wait class "Concurrency" was not consuming significant database time.
Wait class "Configuration" was not consuming significant database time.
Wait class "Network" was not consuming significant database time.
Wait class "User I/O" was not consuming significant database time.
Session connect and disconnect calls were not consuming significant database
time.
Hard parsing of SQL statements was not consuming significant database time. -
Error Handling while using Batch Operation
Hi Experts,
I am trying to update document with multiple successful items using batch operation with single changeset and document is updating successfully.
But when i am trying to update document with multiple unsuccessful items, I am getting error saying " HTTP/1.1 500 Internal Server Error" .
If it is for a single unsuccessful item,i am able to get the error message as return parameter, but i am not able to get the error messages as return parameter if it is for multiple(more than one item) unsuccessful items.
Could you please let me know your thoughts on this.
Thanks,
SyamYes: I can.
Provided someone provides version information
Provided someone identifies specific API's
Provided someone defines what conversions they are referring to.
After you've defined the problem go to metalink or tahiti and look up the answer yourself. -
I use the operating system Mac os x 10.10.2 and would like me like to purchase Adobe Photoshop Elements 13 am with but not sure because is specified in the system requirement only os x 10.9. Can you help me?
Yes, it works. Download the trial and see for yourself. Adobe never updates the system requirements after any version is released, so that is what was available last Sept. when PSE 13 was released.
Maybe you are looking for
-
Printers wont install since update to 10.8
since update to 10.8 not able to install new printer, any ideas on the problem. Tried using the disc and still will not work, Macbook software all updated as well??
-
Deleted requisition items still showing in ME57
Hi, we have a PM order that has two components in the bill of material. They were deleted on the PM order. When we look at the requisition these two components are shown in a deleted status as expected. We have a user that uses ME57 to look at the ou
-
Dear Gurus We are creating purchase orders from project system Tcode: CNMM, but when we select the purchase requisition and try to create purchase order. it gives error that tax code V0 is not assigned to our tax procedure. as We are maintaining out
-
Printed Docs Not Following TOC
When you generate a printed doc (in this case, Word output), you are supposed to get output of topics in a sequence that follows the TOC as outlined on the TOC panel in RoboHelp. Instead, I am getting a complete jumble, with some topics even repeated
-
How to change embedding option when using the place command?
When I try to place any file to illustrator (latest version) its automatically embedded. Is there any way to change that so the file will be linked and not embedded?