2008 macboom pro charger

I have a 2008 17 in macbook pro, the ac charger broke.  Can I use a charger from a 2011 macbook pro model ?  If not, what is the correct part number for the replacement charger I need ?

As long as the wattage is the same (which I think it is 85 watts).
http://store.apple.com/us/product/MC556LL/B

Similar Messages

  • Hello.  I recently pieced together a late 2008 MacBook Pro 15".  Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.

    Hello.  I recently pieced together a late 2008 MacBook Pro 15".  Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.
    I have reset the NVRAM and the SMC a couple of time but that didn't work so I ran an Apple Hardware Test and while testing the logic board it gives the following error:
    4SNS/1/40000000 LB1T
    I've done some research and found this is a temperature sensor related to the battery, but cannot find where the sensor is located in the computer.  Would you know how I can find the sensor to test it?  Could my battery problem be related to something else?  Would a fresh install of Lion help?
    Thank you!
    Mike
    Two pieces of information that may or may not b helpful, the hard drive is from my early 2008 MBP and the only test disc I have access to is from an iMac.

    Why do you have LION installed on that older machine?
    So you say you built a macbook from a bucket of parts eh?   Kudos
    heres a pic of the battery temp sensor

  • What charger do I need for my 2008 macbook pro 15"

    what charger do I need for my 2008 macbook pro 15"?

    This one:
    http://store.apple.com/us/product/MC556LL/B/apple-85w-magsafe-power-adapter-for- 15-and-17-inch-macbook-pro
    Ciao.

  • How many hours does a brand new battery last after fully charged. I have a late 2008 Macbook Pro.

    How many hours does a brand new battery last after fully charged. I have a late 2008 Macbook Pro.

    clintonfrombirmingham is right, there is no way to exactly tell. But from personal experience, a new battery on a 2008 will last for about 2 1/2 hours with a higher screen brightness and doing something taxing to the battery (like gaming or running lots of 3D programs). But if you're just listening to music with the brightness all the way down, and no programs running, you could get up to 12 hours. So for average use, it should last you a whole business day (assuming you don't use it more than 30% 0f the time). Hope this kind of gives you more of an idea of what to expect:)

  • I have a early 2008 Macbook pro and just bought a new battery, but it is not holding a charge

    I have a late 2008 Macbook pro and just bought a new battery, but it is not holding a charge.  I read it may be the charger,
    that sometimes is blank, but it does charge my computer.
    Anything I can try?
    I have updated to 10.9.2
    Message was edited by: wplewis

    Bring it back to the Apple store with your MBP and charger.  If the battery is found to be defective, they should provide you with a replacement (assuming you are in the warranty period).
    Ciao.

  • Renewing a Late 2008 MacBook Pro: hard drive and battery substitution

    Hi all,
    I am an happy user of a late 2008 MacBook pro.
    However, with the passing of time, it became slow and the battery also deteriorate (it still quite OK, but it is not like at the beginning).
    But let's start from the beginning: the hard drive
    By googling for a while, I noticed that several people experienced very slow performance of their late 2008 MacBook Pro. That is also my case. Apparently, this is due to the hard disk which is dying, and then I considering to change it. However, I haven't found answers to these questions:
    - Is it possible to mirror all the containt of the current disk to the new one?
    - I only have the original installation disks of the first Leopard. I made all the updates through the network. Moreover, since it passed lot of time, I am afraid that some sector of the installation disks may be damaged. This means that I may fail in the installation of Mac Os X on the new hard drive. If I have to reinstall everything from scratch with the new hard drive and without installation disks, how should I do?
    - If I go a Mac Reseller shop, will do they perform this operation? And how much does it costs to make it? Or I may also go to some generic computer reparation guy?
    - Is it convenient to save all the data (movies, documents, pictures, emails, etc) somewhere (e.g. external HD) and then perform a completely new installation?
    Next, let's consider the battery.
    Here is a screenshot taken with iStat Pro:
    Do you think it is worth changing it? From System Profile I have those other info:
      Full charge capacity (mAh):          3386
           Current (mA):          846
           Voltage (mV):          12029
      Condition:          Replace soon
    What do you suggest to do then? How much does it cost a new battery? Actually, I think that also the processor performance deteriorate (it often becomes very hot, especially when watching Flash or Silverlight stuff), but, unfortunately I cannot change it.

    Hi!
    Thanks for all the answer. Please let me to resume this old and interesting discussion.
    After having evaluated several solutions (including NAS, different ways of backup, etc) I bought an external firewire HDD, since I believe it nicely fits my necessities. Next, after these holidays, I will finally replace my old HDD with a SSD one. I think 120 GB are ok. I just need the apps and small-sized documents (rather LaTeX, Matlab, word, pages or excel documents, etc. - no movies or mp3 (I have Spotify, for that) ). Large files (e.g. movies, pictures, etc) may end up in external firewire HDD.
    Now, let's consider the OS. I currently have 10.6.8 and I am very satisfied of that. I find it very stable, and all the apps I need are still well supported. On the other hand, given that there are like 5 years that I have the same installation, I may have a lot of obsolete files and setting that I can safely remove. This means that once I will have performed a backup of my documents, my email, my pictures etc. I can safely throw away all the rest. Hence, I may perform a brand-new installation of the OS. Although I am happy with 10.6.8, I was wondering if it is worth to upgrade it (I have a 2.53 Ghz Intel Core 2 Duo - 4 GB 1067 Mhz DDR3 RAM) to Lion, Mountain Lion or Mavricks. In that case, which would be the real benefits? And what about the cons?
    Finally consider that I only have the Leopard installation disks from 2008 (not even Snow Leopard) and I will bring my laptop to a techician to change the HDD (I know, it is simple but I don't have all the screws etc. and I will not buy them only for this purpose). Once he will have replaced the HDD, will he re-install the OS also? Or I have to reinstall the OS through my original DVD (5 years old, I don't even know if they still work) and upgrade to Snow Leopard again by myself? I would exclude the carbon copy solution since I may want to throw away a lot of garbage and perform a brand new instalation of the OS. How to proceed? Thanks again!

  • Will a Macbook pro early 2011 installation disc work on a 2007 or 2008 Macbook pro 15

    My collegue's 2007 or 2008 Macbook pro 15 inch keeps getting stuck on the apple load up screen everytime he hits the power button. He doesnt know what version it is and I forgot to write down the model number of it(Ill update May 16 at 10am PST). I tried safe mode, it worked but after the loading bar gets close to 1/2 it freezes up. He can not find his installation disc that came with the computer. I have mine but its for Model # A1278 I think its snow leopard. Will the installation disc and application disc run successfully on my collegue's 2007 or 2008 Macbook pro?
    I apologize if there's a similar thread out there, I couldnt find one. -

    Will a MacBook Pro Early 2011 installation disc work on a 2007 or 2008 MacBook Pro 15?
    No it will not.
    Machine specific gray/back disks are for one model of Mac only as they only contain hardware drivers for that model, not previous ones.
    The 10.6.3 white Snow Leopard retail disk will work and it's available from Apple online for a small charge.
    My collegue's 2007 or 2008 Macbook pro 15 inch keeps getting stuck on the apple load up screen everytime he hits the power button.
    I tried safe mode, it worked but after the loading bar gets close to 1/2 it freezes up.
    This is indicative of a problem with the boot drive and the file structure retaining data on the drive.
    The progress bar progressing and stopping means the fsck drive repair is failing, likley the drive incurred head shock damage at that point.
    The boot drive itself is likely fine and the problem can be resolved but the disks are going to be required if it's running Snow Leopard.
    First get the disks, then attempt Disk Utility > Repair Disk and check the SMART status if the drive is still good.
    If there is no backup of data, get that off the machine using a external boot drive.
    To fix that problem of a bad sectors, unfortutly the entire drive will need to be Zero Erased (security option > zero all data) using Disk Uility while c or option/alt key booted from the 10.6 disks (using a wired or built in keyboard), it's the only way.
    This means all programs, files (remaining) and OS X will be removed in the process. You could replace the drive also.
    Step by Step to fix your Mac
    Create a data recovery/undelete external boot drive
    How to erase and install Snow Leopard 10.6
    Install/upgrade RAM or storage drive in Mac's
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

  • Early 2008 MacBook Pro - no chime, no video, sleep light solid

    Have here an Early 2008 MacBook Pro, 15", 2.5GHz. It's in good physical shape... shows no signs of spillage, being dropped or mishandled, etc. I know virtually nothing of its history.
    The machine will charge the battery. When I attempt to turn it on, I hear the fans and drives do their thing - but I get no video (internal or external, not even the backlight) and no chimes or tones. The sleep indicator light turns on and stays on, solid white.
    Tried the SMC reset proceedure outlined here (remove battery, hold power key 5secs, reinstall battery and try again) - no effect.
    My gut reaction is bad logic board, but wanted to check here before giving up on it. Anything I might be missing?

    I've worked extensively with the older PPC (and, dare I go back so far, 68K) machines, just not up on all the common issues and techniques for the Intel-based Macs. This seems hardware-y to me, just want to make sure I'm not missing something relatively simple.
    Pressing D (or any other key/s) doesn't have any effect, as the machine isn't making it that far into the boot process.
    EDIT: the message above was posted as I was typing.
    I was afraid it could be that... heard it to be a common thing, but never seen one do it in person. Too bad the warranty extension just ended a month ago, else I would have had more motivation to make the trek to the Genius Bar.
    My strong suspicion that it's a logic board issue, and that I've got myself a fancy aluminum paperweight, is getting stronger.

  • Crack in screen (late 2008 MacBook Pro)

    Hello everyone,
    I have searched the 'net and this forum about cracked screens, and have found a lot of useful information, but wanted to post this and ask a few questions anyway, as I haven't found exactly what I am looking for.
    My late 2008 MacBook Pro screen cracked just tonight. The crack begins near the bottom left, in the black border along the bottom, horizontal edge of the screen. From there, it goes up a few cm above the black border, curves to almost horizontal, and then curves and goes back down to the horizontal edge, about 2 inches from where it began.  So, it is a very small crack that goes up from the bottom edge, over just a little, and then right back down to the edge. It is barely noticable doing normal work. The crack can not get longer since it goes up and back down to the edge. I suppose the only way it could get worse is to deepen (you can barely feel it) and cause other problems. I tried to take a picture for this thread, but the crack doesn't even show in a picture. My questions:
    (1) If I don't get this fixed, what are the chances it will damage the display over time? Will it create lines and/or green/blue/etc. spots or anything else? Could it cause other problems to the computer?
    (2) What do you reccommend as the best way to go about fixing this if I decide to do so? I know my local Apple Store will fix it, but I also know they'll charge more than I probably want to spend. Other solutions? Positive experiences?
    It kind of saddens me to see it; crazy as that may sound! This has been (still is) a great notebook (I even purchased AppleCare, which I never needed) that went with me through making my first full length film.
    Thank you in advance for help concerning this issue.

    I uswed to have that problem in my Macbook OPro early 2008, and I ordered an LCD panel, it's a Samsung 15.4 inches LED panel, then I disassembled MBP, involved more than 40 screws and very delicate parts removal and reassemble. It cost me US$ 120 and 2.5 ghours to do.
    But if you take it to Mac Service Center, they will change the whole lid and thjat will copst you more than US$ 600

  • My 2008 MacBook Pro Won't Turn

    Hi everybody,
    I have a 2008 MacBook Pro, and it just won't turn on. When I hit the power button, the white LED light in the front flickers for a second, and then shuts off.
    If I hold down the power button, the computer sounds like it will turn on and the disc drive starts spinning, but within 5 seconds the lights begins to flicker and the whole thing shuts off again.
    I have tried resetting the SMC and the PRAM with no luck.  Does anyone have any suggestions? I'm getting desperate!
    Thanks!

    You did the SMC Reset, however there are other "no start" links from Apple, including MagSafe issues
    If none of those work and your machine charged overnight with still nothing, then it's a call to hardware repair.
    See #1 here
    Step by Step to fix your Mac

  • My 2008 MacBook Pro (A1260) will not startup

    Greetings!
    I was given a 2008 MacBook Pro that will not startup. I press the power button and it trys to start for like 5 seconds and goes no further. The battery is fully charged and the powercord is pluged in. I know that Apple has it listed a "Vintage", but I'd like to get it working. Any suggestions?
    Thanks,
    David

    David,
    were you also given two grey installation DVDs which originally came in the box with your MacBook Pro, called “Mac OS X Install Disc 1” and “Mac OS X Install Disc 2”? You’ll need those discs to be able to further diagnose the current problem. If those discs weren’t given to you, you can purchase a replacement pair from Apple.

  • 2008 Macbook Pro won't turn on

    Quick question before I go to the Apple store-
    Recently updated my 2008 Macbook Pro to Yosemite. Ran into a ton of issues involving WiFi and Java 6 but resolved them relatively easily and it was smooth sailing for a bit. Today, I booted it up as normal, got to my desktop and then it immediately goes into sleep mode. I hit the spacebar and it shut itself down. Now when I hit the power button I get nothing. No fans, no boot sound, nothing. The indicator on the charger is steady green and the side LEDs all light up just fine. Am I totally screwed???

    You might try replacing or checking the individual RAM modules you have installed on your computer. As pointed out previously, this might be a problem.
    I have a MBP 17" (Mt. Lion).  I had plugged in a usb cord to sync my iphone and the MBP just died.  Wouldn't power on, resettting SMC didn't work.  The magsafe would be green briefly and then just start flashing really fast, and also very dimly.  This was with a couple of different power adapters so it wasn't the adapter.  Finally took it to the Apple Store.  Genius bar guy took it in back and said that there was something wrong, he unplugged the battery and it still wouldn't start, so it wasn't the battery and I also think he said that he did a motherboard reset.  That also didn't work.  So I spent $300 to get the motherboard looked at.  It was returned several days later and the only thing the paperwork said was the RAM was bad and they replaced it.  I had replaced the original RAM with 2 X 8Gb of third party stuff.  This was working until I plugged in the usb, so it didn't seem like that should be the problem, but  Apple replaced with 2 X 4Gb of RAM (and gave me back my 2X 8Gb sticks) and the computer works, no motherboard replacement, just the RAM.  I didn't think that both of the 8Gb ram sticks could be bad, so I checked each of the 8Gb sticks in the computer, and what do you know?  Both 8Gb of memory work, and I've since replaced the Apple memory with the both of the third party 8gb sticks and the computer works again.  What the problem was I don't know and now it seems to be working just like it used to.  So you might check the RAM you have and you might determine you have a bad dimm or it just resets something so that things work again.

  • New macbook pro battery for late 2008 macbook pro dies fast.

    I have a late 2008 macbook pro 2.4 HGz Intet Core 2 Duo with 2 GB of ram. I've had it since 2009 and just got a new battery, as the old one finally gave up. That being said, the new battery dies quite fast and I'm not sure why. Any suggestions would be greatly appreciated! thank you

    Only problem is that maybe the battery you were sold was manufactured around the same time as the Mac. And LiPo batteries die because of old age as well as use. Take it out and carefully examine all markings, especially anything that can date when it was made, like copyrights or such.
    With that evidence you can go back and demand a refund.

  • How can I connect my early 2008 MacBook Pro to a tv through HDMI?

    I was wondering if there is a way to connect my early 2008 MacBook Pro to a tv using an HDMI port. My MacBook Pro has a DVI output. In the past I bought a DVI to VGA adapter and connected it to a TV that had a PC input that took VGA and a 3.5mm audio cable. I was wondering if anybody has found an adapter or cable that takes a DVI and 3.5 mm audio cord and has only an HDMI cord at the other end. I have a new TV that only has HDMI inputs and would like to be able to connect my laptop to it.

    Since you have not identified exactly what MBP you have, but mention DVI, I suspect a cable such as this is what you will need.
    http://www.ebay.com/itm/like/380694416929?lpid=82
    Understand that 2009 MBPs and earlier do not support audio via DVI or minidisplay port.  You would have to tap the audio output port  with a cable such as this:
    http://http://www.bhphotovideo.com/bnh/controller/home?O=&sku=691009&Q=&is=REG&A =details
    I am not endorsing these cable specifically, these are just examples that represent what connections that are required.
    Ciao.

  • How to connect a late 2008 macbook pro to hd tv

    I have a late 2008 Macbook Pro and want to connect it to my HD TV what cables do I need ?

    looks like if you'll use exactly this adapter you'll get audio over HDMI

Maybe you are looking for