23" HD Display stand arm mounting question

The back of my 23" HD Cinema Display has just a bar on it. So my articulating arm Vesa plate with 4 screws doesn't work.
I guess I need a different type of plate or something.
Can someone please direct me to the adapter/plate I need to use. Or do I need to use a specific type of arm?
Thank you!

You need the Apple VESA adaptor:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M96 49G/A

Similar Messages

Triple Display Stand

Hi there, has anyone found a triple display stand with a desk mount, to hold three 24" displays,

Hi, Volt,
    This subject has been explored in depth on this board. To keep it short, yes, you can indeed drive two external monitors at the resolutions you mentioned without the dock, plus the internal makes three.
    For more, check out this thread (among others):
Monitor madness
                                                Best!

Looking for a broken iMac G4 Display with arm

Hi, im looking for a broken iMac G4 Display with arm included, i need it for a school project, so if anyone knows where i could get/buy one please tell me. Thanks!

Hi, there should be lots of iMac parts machines in fact I just looked at one auction a second ago.
http://cgi.ebay.com/Apple-iMac-G4-1GHz-17-for-PartsW0QQitemZ200364020743QQcmdZViewItemQQptZApple_Desktops?hash=item2ea6a05407&_trks id=p3286.c0.m14&trkparms=65%3A12%7C66%3A2%7C39%3A1%7C72%3A1234%7C293%3A1%7C294%3A50
You must be searching with the wrong keywords....
Kevin

My MacBook si not booting displaying a folder with question mark

The very latest development in My Macbook that is not booting, it now displays a gray screen with blinking folder and a question mark inside then it turns off after few minutes.
It is not responding to any option+C,S,V, shift and I cannot boot from the install CD or diskwarrior.
Any thoughts??
Thanks,
AT

If DW can't see the hard drive then it does not bode well for the drive. Try booting from the CD and run Disk Utilities from the CD to see if the drive shows up there. I am not optimistic though since usually DW stands a better chance at this than DU.
If neither DU nor DW work, try using an application such as [Data Rescue II|http://www.prosofteng.com/products/data_rescue.php] or [FileSalvage|http://subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1]. Both have free trial versions that let you see if the software will help before you decide to buy. In this regard you can use them as an analytical tool to see if they can see the drive.
There is also this free tool which supposedly runs on OSX and does recovery of popular media and Office files. [http://www.cgsecurity.org/wiki/TestDisk_Download] I have only done a bit of reading about this tool so I really know almost nothing about it - maybe it only works on Intel processor computers.

Disc image and mounting question .

Disc utility - file - new > blank disc image . Save as ( so so ) . Volume name (so so ) . Volume size (4.5 gb dvd-r/dvd-ram. ) . Volume format ( mac os extended journal ) . Encryption ( none ) . Partition (cd dvd ) Image format ( spars bundle disc image )
I do this and I get two icons on desk top . One looks like the hard drive symbol and will say so so .sparsebundle . Then under it is an icon that looks like an external cd player or the like . And will say the image name under it .
When I open the image icon and put my files into it I close it and burn it to dvd . After it is finished I try to open it and it says it cant be mounted . So I tried the hard drive looking one just above it and nothing . So I could eject the icons but not the dvd . She says I should try closing application and try again . Cant find anything to close so I restart and can eject the dvd then . I put it back in and same thing so I restart and get it back out . Now I start all over a new and just before I burn I leave the folder open and click edit select all the file the burn selected items to disc and vwula every thing
s ok .
Now after you have read all this , my question is (1) What is the top icon for ?
(2) Is this normal ?
(3) Can I keep asking questions like this to learn my mac . I do search the forums and they are quite helpful Thank you for your time .

Plymouth Horizon,
I will do my best, First Why are you making a sparse image and then burning? To Me this seems like extra work. What you can do is make a Burn Folder, add the things you want burned and then burn it. It will add Icons for the stuff in it with an alias Icon but it will burn the file not just an alias. I personally only use the images when I want to secure something with a password, or store files I've downloaded.
I would say that its normal, in the case that your making the image on your desktop. The reason you have the two 'Icons' is one is the image and the other is the mount of the image. Think you downloaded a .dmg file you have the file in your downloads folder and the icon on your desktop, you trash them both to get rid of.
And you are more then welcome to keep asking questions here, that is what these forums are for.
Hope that helps,
Weston

Updateable Report : re-display collection & Update Button question

This a sequel to a previous Updateable Report question I had.
Varad pointed me to this doc which has been incredibly helpful .
http://www.oracle.com/technology/products/database/application_express/
howtos/tabular_form.html#RESTRICTIONS
I was\am having the following issue :
Let's zoom to the part where we create a region to display the tabular form for the previously saved collection , and drill down to the part where we create an UPDATE EMP button for that displayed collection :
I was not able to display the collection again when I failed the validation a 2nd time. ie, clicking on the UPDATE EMP button after it displays both the errors-post validation and after displaying the collection ( of course) would return me to the previous report pre-collection creation. When I turned debug on I found out that it was not even creating the collection and was hence deleting it before displaying the subsequent page.
So what I did differently from what the documention instructs is as follows :
I removed the page reference on the 'branch to page' of the UPDATE EMP button. In my case, the default 'Branch to ' Page after Processing is the same page I am using for this part of the application.
So when I remove the reference to the page number. for that button, the page is then able to re-create the collection and hence re-display the collection so I can re-fix the 2nd error ( ... and 3rd) and finally update the report .
Just wondering if anyone else has had the same experience ?
Thanks !

The columns and rows have a set format for the Id, so if you know one Id you know the row and the ids of all the other columns.
As an example, this will show the value of column 6 when you click on any column with the function call in the Element Attributes:
Script:
<script type="text/javascript">
function showCol6(col){
var col6 = document.getElementById("f06_" + col.id.substr(4,4));
alert(col6.value);
</script>Element Attributes:
onclick=showCol6(this);You could also use a Named Column template, specific to this region, to include the column values directly in the function call, but I think it's best to stick with the ApEx defaults if possible.

Time Machine not displaying backups of mounted /Users

Bottom Line: Time Machine 'Warp' GUI does not display available backups when using Finder to browser user directories stored on HDD, mounted on /Users in /etc/fstab, even though the backups exist and I can navigate to them from the Finder to the backup disk
Machine Config:
1. OS X Lion 10.8.5 on MBP 2.53 GHz Intel Core 2 Duo running on a SSD as the OS X boot drive, and the OEM HDD in a drive tray in what used to be the superdrive bay.
2. The HDD is a single partition dedicated to Users and mounted to /Users. When unmounted, the SSD has a /Users dir with a single admin-enabled user still present to ensure I can still boot and log in as that user in the event the HDD does not mount.
3. The /Users dir mounts successfully using /etc/fstab
4. The HDD still displays in the Finder window and the desktop, which is not a problem for me
I've posted a work-around at http://www.andrew.cmu.edu/user/mlanham/currEvents.shtml that explains I can, inside the TM restore GUI (what I've heard called 'warp' and 'space') select the machine label under the Devices list in Finder (on the left side). I can then expand folders without double clicking them, and get TM to restore the file(s)...TM sees the backups as present and available and functions as I would expect.
However, when I select a labeled location (e.g. Google Drive, Downloads) under the Favorites label, still inside the TM restore GUI, all the backups are black and do not otherwise indicate they are present for restore actions.
I thought I read a blurd somewhere warning me of this situation, but I cannot find the blurb anymore--surely I'm not the only one to have experienced this. Has anyone else experienced it? Overcome it?
More importantly, I am interested in knowning if this is 'as designed' behavior or a bug in TM's GUI presentation. Why should TM care if a dir is a mounted partition or not...if it was present during backup, and present during a restore request, it should render the available backups as available to select. Not make me do a work around.

Earlier, I posted that the OP in https://discussions.apple.com/message/8182305#8182305 resolved this situation by making a softlink from SSD /Users to HDD's /Users and removing the entry from /etc/fstab. Initially, I thought this was a bad idea, as if the HDD fails to spin up and mount to /Volumes, that the system would fail to boot as it would not find a /Users directory available.
Then I read a different post that implied that if that happens, simply boot to single user mode and fix the trouble with the HDD.
Is this soft-link + boot to single user mode a better choice than /etc/fstab to mount the HDD to /Users (where the SDD has a non-empty /Users with a single admin-enabled user in it)?

Yosemite Mail displays image attachments as question marks if attachments also contain a pdf

We have 11 macs running Yosemity in our company and I have the following problem with Mail since upgrading.
If an email is created in Mail and both images (jpg) and pdf's are attached to that mail, the recipient will see the images displayed as question marks, but the pdf show as icon as it should. This is only on mac. Other clients see the attachments properly.
This also appears to be the case when receiving email from others using outlook. When the email contains both images (even in signatures) and pdf files, the images displays as question marks and the pdf display as icon or previewed as normal.
Any suggestions?
Displaying remote images in HTML emails are ticked, but this is attached images, not remote images.
When sending the pdf only - displays correctly
When sending the images only - displays correctly

I found a solution here and it worked for me. It doesn't go back to old messages that are already in your inbox and correct the issue, but any new messages that come in will show images:
http://meandmymac.net/2014/10/trouble-with-yosemite-mail/

Preview not displaying fonts correctly - Only question marks

I'd like to report a problem we are experiencing viewing or printing the PDFs using Preview.
We receive regularly PDF files from one of our clients that are created using PDF-XChange (on Windows Computers). The files are on PDF standard 1.4 and include the font Calibri (embedded on the PDF file and also installed on my MacBook Pro)
On opening the files (in Lion) in Preview app. I only see question marks instead of the text.
However these PDFs open correctly using Adobe Reader on the same machines. The files also display correctly on iPhone, iPad, windows PCs, and on other Macs running Snow Leopard. This problems started to happen after we migrated to Lion (we could, and still can, open the files on macs running snow leopard).
In Preview.app I can copy the "question marks" and past in text edit, where they do appear correctly!

Well I found a few minor font problems which seem to have cropped up since the last system upgrade, but none of those were the font in question. Also, as I understand it, the whole point of PDF documents is that the fonts are embedded in the document so you do not have to have the fonts installed on your computer to view the PDF properly. I use a lot of special fonts and when I save documents as a PDF I can send them to anyone on the internet and they can usually see everything as it is meant to be.

27'' display inclination arm

I've got a problem with my iMac display. The inclination arm has become too soft so it makes the display to be inclined downward. I cannot keep the inclination I'd like. What should I do? Is there any solution?

Other than prop it up there's nothing you can do. Make an appointment and take it in for service.

Arabic display as garbage & reverse question marks ¿¿¿¿¿¿

Hi,
In the Standard & Custom reports arabic is displaying as garbage. eventhough all the necessity tasks where performed like Configuring Pasta for arabic
While in pdf arabic is diplaying as garbage(junk) and in Postscript reverse question marks (¿¿¿¿¿¿)
What else i have to perform to display arabic properly.
Thanks,
Alig
Edited by: user12257829 on Apr 5, 2010 11:28 PM
Edited by: user12257829 on Apr 5, 2010 11:28 PM

Hi,
Even i copied AF_JRE_TOP top from $FND_TOP/rsource..
but i didn't solve the problem.
I run diagnostic test for pasta
Test details:
Generic Tests [Top]
Node Information
Tiers = Admin, Web, Forms, Concurrent
Pasta Executable Version
WARNING - Cannot determine the pasta version
ACTION - Apply the latest Pasta patch
Pasta Driver Settings [Top]
Printer Name = noprint
Printer Style = LANDSCAPE
Pasta driver name = PASTA_LANDSCAPE
Command arguments = -pn$PROFILES$.PRINTER -f$PROFILES$.FILENAME -c$PROFILES$.CONC_COPIES -l
Pasta PrintForms
Printforms feature is not used. To insert a company logo or background image in a concurrent report modify the printer driver 'PASTA_LANDSCAPE' definition in the Printer Driver form. The steps are given in the 'PASTA Users Guide 3.0' and PASTA 3.0 Release Information
Pasta Configuration File
Concurrent Node Environment Variables [Top]
NLS_LANG Variables
Database = AMERICAN_AMERICA.AR8MSWIN1256
OS environment = AMERICAN_AMERICA.AR8MSWIN1256
Concurrent Request = AMERICAN_AMERICA.AR8MSWIN1256
Pasta Environment Variables
LANG = en_US.UTF-8
PASTA =
IX_PRINTING =
IX_RENDERING =
APPLLCSP Environment Variable for Bitmap Report Printing
APPLLCSP =
Pasta Viewer Settings to View Bi-Directional Reports [Top]
Bi-Directional Mime Type
The mime type 'apps/bidi' is registered to be used with Pasta Viewer for Text
Profile Options
Viewer: Application for Text (FS_MIME_TEXT) = null
Viewer: Text (EDITOR_CHAR) = Browser
Please explain what is missing
Thanks,
Alig...

LionOSX: Macbook displays a folder with question mark

My Macbook won't boot and, instead, displays a grey screen with a folder with a question mark.
From other discussions, it seems that the solution for this is to try to boot from the CD-ROM. However, this computer was recently upgraded to Lion OSX from the App Store.....so no CD-ROMs are available.
How can I resolve this issue?
Thanks in advance,
Tony

You should be able to hold down the 'Command-R' key's at startup to boot into the Lion Recovery Partition.....run Disk Utility from there....
support.apple.com/kb/HT4718

System pref- what do the display numbers mean &other questions

1. are they the choices that the mini (purchased 9/07) can "send to the display" or are they the monitor's only display choices built into the monitor (like 1024x 768)
2. whats the advantage if any of a widescreen LCD display
3. will any "cheap- ie $200-300 LCD viewsonic. samsung, HP monitor work with my new mini if the monitor has a dvi or vga plug?
Its now running my old proview CRT I paid like $129 for .
4. does the mini have a set / preferred resolution range, again like the 1024 x 768
Thank you

Great questions edwardh1. I'll tell you what I think are the answers.
1) The mini does contain several pre-installed resolutions, so it is aware of several "standard" resolutions without any reliance on a display driver. However, whether or not the mini makes some or all of these resolutions available to the attached display will depend on how the mini "detects" the display.
2) Widescreen is much better for modern digital media. For example, DVD playback on a widescreen is much nicer than on a conventional screen. It's also nice to have a little extra width when using certain programs that have tool palettes. You can stick the palettes off to the side where they don't interfere with your work area. And if you go really big, like a 24" monitor, you can put two pages side-by-side, which can result in a real boost in efficiency with certain tasks.
3) As to whether any monitor will work with a mini, in theory the answer is yes. But if you hang out on these discussion boards long enough you will see that the road is full of potholes. Apple, as has been the case for a number of years, is always on the leading edge of new technologies, with Windows in a trailing position. If you want examples, think of USB, FIrewire, Bluetooth, DVI...the list goes on and on. Macs use a modern plug-and-play architecture for delivering the display driver to the host (Mac). Windows can perform this trick, but they also have a legacy system where the user installs the display driver (usually from a CD ROM) or else a wizard installs the driver from the internet. The problem with old habits on Windows is that they die hard. So even though modern displays for the most part correctly implement plug-and-play drivers, which in theory Windows does support, there are plenty of cases where the display manufacturers blow it and fail to do a good job of it. Instead they ship the Windows driver on a CD and call it a day. So you can be 90+% confident of a good result when buying a non-Apple monitor, but by no means is it guaranteed.
4) This question is very similar to your first question. Yes, the mini will have pre-installed several standard timings. I am sure 1024 x 768 would be on that list.
My final comment would be don't worry too much about buying a third-party display. Go for what you want with the confidence it will most likely work just fine.

Firewire drive mounting question

I have a portable firewire 800 drive I just purchased. I am using for live capture of video. Yesterday I set up for a shoot about 10min before start of show. Plugged in drive but it did not mount. I could hear and feel the drive spinning but it did not show up. I have a expresscard two slot 800 ports. Tried it through expresscard and computer 800 slot. I did a repair permission and it still did not mount. Restarted also. Powered off, unplugged it, no go. Unplugged again and it showed up.
My question, is there steps for trouble shooting mounting problems? I had to use tape for about ten minutes.

Repair permissions won't be a help. Sounds like a marginal FW drive - who made it?

Re-attach display stand

I may have really messed up. I removed my stand so I could pack my display for an upcoming trip. Everything went fine, but did have some trouble releasing. The lock that allows you to get to the screws. Out of curiousity I wanted to see how the lock worked. I figured it would make it easier the next time I needed to unlock it. Here's where I messed up. I pressed on the lock and it sucked the flange back inside the display. Not good.
Since I didn't have time to try and figure out how to get the flange back out, I finished packing the display and hit the road. I'm hoping someone has figured this out. Thanks for any suggestions.

Hi, I had same problem when I decided to replace my stand on 24in white Apple, after a lot of cursing I found that after replacing the screws etc you now have to place more pressure on the stand by pushing downwards before sliding the card in, I am assuming that you have the face of the computer laying face down on a soft cloth, give it a try, Robin u/k.

23" HD Display stand arm mounting question

Similar Messages

Maybe you are looking for