2LIS_02_ITM No Data Population for BWVORG

Hi Everyone,
I have activated & filled the setup table for 2LIS_02_ITM. Somehow, the data for BWVORG (SAP BW Transaction Key) is not being populated.
How could this issue be resolved?
Thanks in advance. Points will be rewarded.

Hi,
Did you activate the process keys? Also check whether it is coming in RSA3 or not ? Please also take a look at the two note below that should help you.
Note 684465 - BWVORG for purchasing data sources
Note 353042 - Howto: Activate transaction key(PROCESSKEY)
Regards,
®

Similar Messages

Date population for USR_END_DATE

Hi
Can some one paste the code for populating User's End Date, once a user is deleted.
TiA

once a user is deletedYou have to do it before Deletion.
Create an Entity adapter and attach it in Pre Delete:
Not able to update Start/End Date with updateUser API

How a sales order for a MTO sku can always have required date populated bas

Hi,
how a sales order for a MTO sku can always have required date populated based on full lead time ?
Thanks,
Raja

Hi,
If you run MRP against sale order by tcode MD50, system will generate planned order.
System will generate basic or lead time scheduling depends on MRP run parameter selected in initial screen of MRP run.
If you select lead time scheduling, system will time from routing and thus generate scheduled start date & finish date.
If your requirement date say 10/08/08. Lead time 10 days. So system create scheduled start date on 01/08/08 during MRP run.
Regards,
Dharma

Standard BI Data Source for FMGLFLEXT

Hello Friends,
The standard data source for the Financials New Legder is 0FI_GL_10 General Ledger: Leading Ledger Balances, which fetches the data from the FAGLFLEXT Table using the Extract Structure FAGL_EXTSTRUCT_LEAD. However there has been a migration of the FAGL table to FMGL table. And now the FAGLFLEXT is no longer populated with any FI postings data. And the new table which is getting the update is the FMGLFLEXT Table. GL Migration from FAGL to FMGL is a standard procedure. However I am not finding any Standard Data Source to fetch the data from the FMGLFLEXT Table.
Can anybody let me know if there is any standard datasource for this or should we create a custom data source to fetch the data from FMGLFLEXT using the FMGL_EXTSTRUCT_LEAD Extract Structure.
Appreciate help in this regard.
VB

Hello,
The requirement is resolved by the following:
If you want to use your own totals table (in this scenario FMGLFLEXT) as your basis, you first have to create the corresponding extraction structure using transaction FAGLBW01. In this way, all fields of the totals table are transferred into the extraction structure. Further In the OLTP system, call up transaction FAGLBW03 and Configure the DataSource and save your settings.
http://help.sap.com/saphelp_nw70/helpdata/en/be/928f40f5767d17e10000000a1550b0/frameset.htm
Regards,
VB

Standard Data Source for FMGLFLEXT Table

Hello Friends,
The standard data source for the Financials New Legder is 0FI_GL_10 General Ledger: Leading Ledger Balances, which fetches the data from the FAGLFLEXT Table using the Extract Structure FAGL_EXTSTRUCT_LEAD. However there has been a migration of the FAGL table to FMGL table. And now the FAGLFLEXT is no longer populated with any FI postings data. And the new table which is getting the update is the FMGLFLEXT Table. GL Migration from FAGL to FMGL is a standard procedure. However I am not finding any Standard Data Source to fetch the data from the FMGLFLEXT Table.
Can anybody let me know if there is any standard datasource for this or should we create a custom data source to fetch the data from FMGLFLEXT using the FMGL_EXTSTRUCT_LEAD Extract Structure.
Appreciate help in this regard.
VB

Hello Sasi and Kirun,
Thanks for your reply,
The requirement is resolved by the following:
If you want to use your own totals table (in this scenario FMGLFLEXT) as your basis, you first have to create the corresponding extraction structure using transaction FAGLBW01. In this way, all fields of the totals table are transferred into the extraction structure. Further In the OLTP system, call up transaction FAGLBW03 and Configure the DataSource and save your settings.
http://help.sap.com/saphelp_nw70/helpdata/en/be/928f40f5767d17e10000000a1550b0/frameset.htm
Regards,
VB

Pricing populating for period not valid in sales order

Hi Frnds
I have an issue with a sales order which has say 10 line items and the pricing for each line item is maintained in VK11. The client updates the pricing say every year therefore the record shows previous prices for that material too. When creating the sales order the system is picking pricing for few materials from year 2005 and few from 2008. This seems to be an abnormal behaviour to me. I checked the pricing record and the new ones are active.
Could anyone give me point me in the right direction??

Seems we are missing a point here, the validity dates maintaines for the new record are correct. The system is pulling the old record for god knows what reasons. for few line items the right pricing is populating but for some its pulling old pricing record.
I hope this helps

XML data source for grid

I am using web services to read an XML file that contains a schema. I am using the input as the data source for a grid. When the grid is populated it does not appear that the schema is interpreted. All the decimal values are presented as strings and are not sorted correctly. Is there something specific that I need to do to invoke the schema?

Worst forums ever! Nobody can help with the insertion of a
currencyvalidator in a datagrid itemeditor?

How to fetch APPROVER NAME and approval date dynamically for an user

Hi all..
How to fetch approver name and approval date dynamicall for an user in an email template..
can any help me to sort out this pbm,i am new to IDM..
Thanks in advance..

Access policies get a static value. You can't populate a field with an adapter. If you must do this, leave the field blank, and put an adapter on the process form for your field that must be populated using code or logic.
-Kevin

Query about Leaving date,Reason for leaving fields in R3 report of HR Modul

Hi Experts,
I have a report in R3 for HR. In the report i am getting fields like leaving date,reason for leaving .
When I clicked F1 on the leaving date and reason i came to know the field name as FIREDATE and MGTXT...
I checked in DD03L table with these field name and found no related tables for that.....
but i found some structures only.........
In order to create a generic datasource with these fields included then how data will get for these fields....
But i find no relevant tables regarding these fields.....in the report of r3 when checked f1
Text
Leaving date
Definition
Date, on which an employee leaves the company.
Dependencies
The following infotypes are taken into account when the value is created:
P0000 - Actions
P0001 - Organizational Assignment
But the above P0000 ,P0001 are structures .... how can the leave date get populated in the generic datasource.which i may have to create ?
Thanks
Vamsi

The easiest way to accomplish that would be to add some logic in a custom controller (i.e some java code). Which is a little more complex than regular personalizations.

Possibele entries are not populating for the fields on the selection screen

Hi,
Possible entries are not populating for the fields on the selection screen for the query.But its working fine in Development and Quality Systems.
Can any body help me out
Regards,
Amit.

Hi,
In the Selection screen,go to Settings->Value Restrictions tab->Read Mode Settings->Custom radio button and select the options Values in Master Data or Only Values in InfoProv or Only Posted values for navigation.
After this setting,check whether you are getting the data or not.
Rgds,
Murali

Can U Think of Any Situation Where U Find VENDOR Info. Populated for a STO?

Hi,
Can you think of any situation where you will find VENDOR information populated for a STO moving stock from a Plant to Store under the same company code?
I got an error ("Enter goods for vendor XXXX only") and this was triggered by the fact that one STO had vendor information in the delivery document. The outcome of this was that every STO beneath this STO could not be GR, but every STO before and including the STO were GR without any issues....
Your response is higly appreciated..
Thanks

SegeTx,
I am not sure exactly what you mean when you say "Vendor information populated for an STO". Is this a UB STO?
Tell me exactly what transaction you are performing, and the data you are entering, when you get the GR error.
Generally, when you set up master data for a STO, you have to assign a vendor to the plant. It is possible that somehow the source plant has become un-assigned from the vendor. WB03, clik past any warnings, enter the plant. In the upper right corner, there should be a vendor. If nothing is there, then you have to re-assign the vendor to the source plant. MK02 enter the vendor you wish to assign to the plant, and the purch org you should use for the STOs. Execute. Select extras > addl purch data. enter the plant. Save.
Best Regards,
DB49

Best option to save data populated from a web service?

I have manage to made a windows form that uses a web service to populate the data into a DataGridView. Then I have a column for adding comments next to each row. So a user could add some comments about this data for each row. Also I have a drop down list
to select some options for each row.
Actually everytime when connecting to this web service there are 7 DataGridViews that are populated with data, one for each TabPage added to a TabControl. So 7 tabs then.
If I close this form and reopen it then it's all gone.
What is the simpliest way if I want to store the settings (comments and selected option in drop down list). The idea is that I want to store this as a project under a name like "Project1", "Project2" etc. So every project would
have their own settings. Then when starting the application all over again, instead of populate it from the webservice, I then load it from wherever it's stored. So I can pick the particular project I want for example "Project1".
So what is the easiest options here? Would it be best to store it in a database or could it be stored in different datasets (one for each project)? Also if I use a dataset every TabPage with it's own unique DataGrid would then be represented as DataTable
I suppose. But then I don't know if the data in a dataset would still be there the next time - if it only stores temporarily?
As for now my only intention is to build this for myself, so I don't need to have any end user in mind.

Hello,
Here is one idea which may be implemented in several ways.
The data stored locally that is not available in the web service (let's look at the web service as read-only) could be stored in a xml file then read into your project via DataSet.ReadXml and DataSetWriteXml to save changes.
For this to work you need to utilize primary keys to identify data coming from the service to match up with locally saved data.
That is the concept which as stated above can be implemented in many ways. I would suggest using a class dedicated to the above and not place the bulk of the code into your forms.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Data Type for a Longitude/Latitude Column in an Oracle dB Table?

Greetings All,
What is the recommended data type for a Longitude(Lon) or Latitude(Lat) Column of an Oracle dB Table? I am creating a signs inventory table in our Oracle database to be used as a data warehouse for our signs inventory. The Lon and Lat fields along with some other data will be populated from a MS access file exported from our Geodatabase. Currently the data type for the Lon and Lat fields of the MS access file is defined as "Double". A couple of Examples of the Lon and Lat data are as follows:
Lat                       Lon
59.4564555909     -135.3133542922
64.841125            -148.01808
...What data type should these two columns be defined in the new Oracle database table??? Should the data type be defined as FLOAT(126), NUMBER(10, 6), or else? Any suggestions/help on this would be greatly appreciated.
If the data type is defined as NUMBER(10,6), the first example of Lon "-135.3133542922" will be truncated to "-135.313354" or would I receive an error while trying to import the data from an access file to the Oracle dB?
Thanks in advance for any/all the help.

Orchid,
Is SDO_GEOMETRY available in Oracle 10g?Yup. I'm still on 10g as well; there's no shame in that.
How do I format my lat/long's into WKT and use the SDO_GEOMETRY constructor?The March 16th example shows the steps, but I take it you're trying to get your data from MS Access into Oracle. Is that right? If so, consider these options:
OPTION 1, When you have < 50k records
Simply write a query that returns INSERT statements that you can run against Oracle.
For example, let's say you have a table in MS Access defined as msaCoords (ID, LongX, LatY).
Let's say, your destination table in Oracle is named oraCoords(ID NUMBER, Geometry MDSYS.SDO_GEOMETRY). Then,
SELECT "INSERT INTO oraCoords (ID, Geometry) VALUES (" & ID & ", SDO_GEOMETRY('POINT (" & LongX & "," & LatY & "'), 8307);" FROM msaCoords;
-- "MS-ACCESS QUERY RESULTS"
INSERT INTO oraCoord (ID, Geometry) VALUES (1, SDO_GEOMETRY('POINT (-135.3133542922,59.4564555909'), 8307);
INSERT INTO oraCoord (ID, Geometry) VALUES (2, SDO_GEOMETRY('POINT (-148.01808,64.841125'), 8307);Save those MS-ACCESS QUERY RESULTS to a text-file (D:\MyPts.sql). Launch SqlPlus and type @D:\MyPts.sql
Once it's done, type Commit into SqlPlus and you're done.
OPTION 2, when you have > 50k records
Use SqlLoader. There's an example posted { here | http://forums.oracle.com/forums/thread.jspa?messageID=9412123&#9412123 }
Cheers,
Noel

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date?

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date? We are facing a scenario where trx date is lower than the actual ship to which logically sounds incorrect.
Appreciate any quick response around this.

Hi,
Transaction date will be your autoinvoice master program submission level date (If you haven't setup any logic.
Please check the program level default date, if user enter old date ststem will pick the same.
Customer is trying to set the value of the profile OM:Set receivables transaction date as current date for non-shippable lines at the responsiblity level. System does not set the transaction date to current date in ra_interface_lines_all.
CAUSE
Customer has used the functionality in R11i. But after the upgrade to R12, the system functions differently than R11i.
SOLUTION
1.Ensure that there are no scheduled workflow background process run.
2.Set the profile "OM: Set Receivables Transaction Date as Current Date for Non-Shippable Lines" at Responsibility level only as Yes.
3.Now switch the responsibility to which the profile is set.
4.Create order for Non-Shippable Lines and progress it to invoicing.
5.Ensure that the 'workflow background process' concurrent program is run in the same responsibility and this line is considered in it.
6.Now check if the 'SHIP_DATE_ACTUAL' is populated to ra_interface_lines_all

Auto G/L population for Non Stock Items

Hi,
I am trying to configure the Auto G/L Population for Non stock item (Material Master item).I have created the Material without Valuation class assignment.
Master data:
Material 1(Material type : Non Stock,No valuation class assignment,attached with Material Group X)
Material group X is attached with Valuation class (Entry aid for items without material master)
In OBYC -->Transaction GBB with modifier VBR maintained the G/L for the relevant valuation class.
I am expecting to default that G/L in Purchase requisition creation screen. But system is not defaulting the G/L account.
Is there anyother steps involve to achieve the G/L default for NON STOCK Materials without assigning the valuation class to Material master.

Hi,
You can set with the help of t.codes:
OME9, OMGO,& OBYC.
Check the below link how to set default General Ledger for Non stock item (Material Master item) in purchasing document
http://www.bluemarlinsys.com/ns/0603-03.asp
Regards,
Biju K

2LIS_02_ITM No Data Population for BWVORG

Similar Messages

Maybe you are looking for