3091LD AC LOAD from California Instruments Initialization.vi error

Symptoms
When initialize vi is executed durectly after AC Laod is power cycled the follwing error occurs:
Error -1073807339 Timeout expired before operation completed.
Error -1074135039. Paramter not allowed. This was followed by a device error desplaced on the instrument display "error 108" p164 of the users manual states: "108: A parameter was sent with the command, but none was expected"
All programs and drivers reinstalled
I installed the latest drivers as you will see below. Eventually, I tried removing all the SW and reinstalling it.
I reinstalled the following order:
ni488225.exe GPIB core SW, reboot
http://joule.ni.com/nidu/cds/view/p/id/335/lang/en
Labview 7.1 Express, Developer Edition - Complete, with all functions and drivers I could stuff it with, reboot.
From CD
VISA 4.2 drivers, reboot
http://joule.ni.com/nidu/cds/view/p/id/831/lang/en
IVI Compliance 3.1
http://joule.ni.com/nidu/cds/view/p/id/820/lang/en
Labview device VIs
They havn't changed from original, but downloaded anyway. Installed folder in same place in instr.lib, were all other instrument VIs are located. these can only be found on the California Instruments website.
AC LOAD Drivers 1.0.0.0
http://www.californiainstruments.com/component/option,com_docman/task,doc_download/gid,61/Itemid,170...
The README file within the ACLOAD package had the following statement:
=====================================================================
CALIFORNIA INSTRUMENTS LAB VIEW 7.0 Driver LD Series
=====================================================================
This instruments driver supports the California Instruments LD Series
of AC Loads.
This driver requires LabView version 7 or higher.
This driver uses a run time version of the LabWindows/CVI driver for
the LD Series. As such, the cicld30.dll and the LabWindows/CVI Run
time engine are required to operate. The RTE is included in the
driver archive file. You may also have to add the instrsup.dll to
your Windows\System directory if it is not present on your PC.
This statement, combined with Coworkers earlier issue with the Initialation problem, created the following additional steps (including reinstalling all SW and drivers)
http://forums.ni.com/ni/board/message?board.id=170&message.id=146138&query.id=476131#M146138
BTW - it looks like the io.dll file is a necessary part of the Binaer code, rather than VI functionality.
Verified the LabWindows/CVI Run Time Engine is installed. It is installed with the VISA 4.2 package.
Copied the instrsup.dll, found in the \System32 foldr ot the Windows\System folder.
Copied the cicld30.dll to the \system and \system32 folder. although it was also in the same instr.lib, as it has always has been, tried placing it next to .vi being executed.
This AND making sure that the ID Query input is always false seemed to solve the issue. Setting the ID Query input is always false is not required for a similar VI for my California Instruments 3001ix AC Source Initialize.vi

Hey ewtotem,
I wasn't able to download the driver from the third party company, so I'm not to sure what's causing the errors you're seeing. I looked into the errors, and the most common problem that will cause this is timing issues. If the function is using VISA commands, you may have to change the default times to be longer as it may not have enough time to send it all the data your device has to send.
As for the second error you mentioned, it seems that it is a driver specific item, unless you are using calibration vis. You may need to look over the code and verify that all the information being sent to them are valid, try running it under highlight execution so that you can see specificallly what's happening.
Can W.
PXI and VXI Platform PSE
National Instruments

Similar Messages

Error while loading from R/3 TO BW ie 0material error

my is leela,
hai i am BW CONSULTANT.i got some problem in
loading s.d billing document ie 2lis_13_vahdr (billing document header data).the problem is i got 0material error
ie some characterisics are entered in material field.
these are ERSTE HILFE AND COACHING. these two are inserted in that field.i copied these once and executed in RSKC t.code ,but it is not accepting ,so pls kindly go through this ,give me a solution for this error .thank you.bye my mail id is [email protected]

Leela
Welcome to SDN
Your 0Material has incorrect Data in R/3 system. Now you have two options
1 Ask your R/3 team to correct this in R/3 who is responsible for this material.
2 In BW correct it in PSA and load it to cube/ODS
Hope this helps
Thanks
Sat

Lenovo 3000 N100 Network issue / Wireless Stack initialization failed, error code 117

Hi,
Lenovo 3000 N1000 with 1GB Ram, Win XP SP2, purchased in May 2006. WLAN network with WPA-PSK key worked without any issues so far and is still accessible with PC.
After transferring music via from my notebook to my mobile Bluetooth all network adapters seem to be disconnected. Neither Access Connections (AC) nor Windows can find any wireless network. Also if I try to configure any LAN, WLAN with Windows I get the message that all network adapters have been removed. However I cannot spot any issue in the device manager as all parts are shown to be working OK.
This is what I've done so far:
1) Checked Radio switch ---> on
2) FN +F5 --> connection on
3) Uninstalled AC, downloaded and installed most actual version (5.00 Build 7VCX32WW)
4) Installed new version for wireless driver for Intel(R) PRO/Wireless 3945ABG (version 12.0.0.82)
Still, even if I uninstall AC to check if WLAN is working at all, Windows gives the error message that all network components have been removed.
Diagnose Tool gives the following output:
"Wireless Stack initialization failed, error code 117"
Logfile:
Description : Intel(R) PRO/Wireless 3945ABG Network Connection
Type : Wireless LAN Adapter
DriverVersion : 10. 5. 1. 59 ----> why is the old driver version??????????
PNPID : PCI\VEN_8086&DEV_4227&SUBSYS_10118086
SupplicantVersion : AEGIS Protocol (IEEE 802.1x) v3.5.3.0
ERROR AcSvc( SYSTEM(Prvlg).1108.4580) [9/3]11:04:15:703 CAcGolan::GetRadioStateInDriver: Golan API GetRadioState() missing!
Hope this is enough information for anyone of you in order to suggest any solution. As I could see from previous threads some of you experienced similar problems in the past and could fix them somehow. However I couldn't find anyone with exactly the same problem.
Thanks much in advance for any advice you might have.
Flo

Hi
I have this problem also with my Lenovo 3000 V200.
Sometimes when I boot up the PC it will connect to the network and everything works just fine.
At other times, after boot, the "wireless stack initialization failed, error code: 118" problem occurs
and the only way to solve it seems to be a PC restart. Nothing else I do will bring the network up.
If I study the Networking tab in Task Manager it indicates that no adapters are available (wired eth.
access also fails). At a few occations connectivity have failed alltogether (i.e. a reboot have not solved
the problem). Last time this occured I had to reinstall the complete system (from a previous backup)
to get networking up.
I have tried different versions of Access Connections (5.02, 5.12, 5.21) and the same problem occurs
at seemingly random instances in time. This is obviosly a problem with the Access Connections software
since the Wireless networking works fine when I let windows manage it...
Anyone with a fix?
/Fredrik

Driver for California Instruments 5001 iX

Hi, i'm looking for a driver for the AC Power Source 5001iX from California Instruments.
i registered on their site for a week now, but i still dont get acces for the download sector
www.calinst.com
can someone download it for me or does someone know where i can download it elsewhere?
i need it for my school project and im using labview 7
thx
Rommie19

You can try and contact them directly or you local contact: http://www.calinst.com/contacts.html
Thanks
Karsten

Images are not loading from initial domain when using a cdn

Hello, i have a wordpress website on which i set the w3 total cache plugin with a cdn, the cdn is MaxCDN and is configured to not serve images but only css & js & font files. Because i configured the cdn not to serve images, the images in css files have the src as absolute path, path which point to original website domain, something like this: background-image: url("http://www.originaldomain.com/images/back.jpg");, the css file is served from the cdn like this: http://cdn.originaldomain.com/css/style.css . So the problem is that firefox refuse to load the images referred in style.css file, images which probably appear to be in another domain. If i try to load the images directly in browser, using address bar, they are loading ok, but on loading from css file i got a http error 500 (acording to firebug). The same website is loading ok in other browsers: ie7/ie8/ie9, opera, safari and chrome. Can anyone help me to solve the issue?

'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Data flow tasks faills while loading from database to excel

Hello,
I am getting error while loading from oledb source to excel and the error as shown below.
Error: 0xC0202009 at DFT - Company EX, OLE DB Destination [198]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
Error: 0xC0209029 at DFT - Company EX, OLE DB Destination [198]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (211)" failed because error code 0xC020907B occurred, and the error row
disposition on "input "OLE DB Destination Input" (211)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the
failure.
Error: 0xC0047022 at DFT - Company EX: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Destination" (198) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput
method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Error: 0xC02020C4 at DFT - Company EX, OLE DB Source 1 [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
Error: 0xC0047021 at DFT - Company EX: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047038 at DFT - Company EX: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source 1" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine
called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at DFT - Company EX: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Any help would be appreciated ASAP.
Thanks,
Vinay s

You can use this code to import from SQL Server to Excel . . .
Sub ADOExcelSQLServer()
' Carl SQL Server Connection
' FOR THIS CODE TO WORK
' In VBE you need to go Tools References and check Microsoft Active X Data Objects 2.x library
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "EXCEL-PC\EXCELDEVELOPER" ' Enter your server name here
Database_Name = "AdventureWorksLT2012" ' Enter your database name here
User_ID = "" ' enter your user ID here
Password = "" ' Enter your password here
SQLStr = "SELECT * FROM [SalesLT].[Customer]" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & _
";Uid=" & User_ID & ";Pwd=" & Password & ";"
rs.Open SQLStr, Cn, adOpenStatic
' Dump to spreadsheet
With Worksheets("sheet1").Range("a1:z500") ' Enter your sheet name and range here
.ClearContents
.CopyFromRecordset rs
End With
' Tidy up
rs.Close
Set rs = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Also, check this out . . .
Sub ADOExcelSQLServer()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "LAPTOP\SQL_EXPRESS" ' Enter your server name here
Database_Name = "Northwind" ' Enter your database name here
User_ID = "" ' enter your user ID here
Password = "" ' Enter your password here
SQLStr = "SELECT * FROM Orders" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & _
";Uid=" & User_ID & ";Pwd=" & Password & ";"
rs.Open SQLStr, Cn, adOpenStatic
With Worksheets("Sheet1").Range("A2:Z500")
.ClearContents
.CopyFromRecordset rs
End With
rs.Close
Set rs = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Finally, if you want to incorporate a Where clause . . .
Sub ImportFromSQLServer()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim RS As ADODB.Recordset
Set RS = New ADODB.Recordset
Server_Name = "Excel-PC\SQLEXPRESS"
Database_Name = "Northwind"
'User_ID = "******"
'Password = "****"
SQLStr = "select * from dbo.TBL where EMPID = '2'" 'and PostingDate = '2006-06-08'"
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & ";"
'& ";Uid=" & User_ID & ";Pwd=" & Password & ";"
RS.Open SQLStr, Cn, adOpenStatic
With Worksheets("Sheet1").Range("A1")
.ClearContents
.CopyFromRecordset RS
End With
RS.Close
Set RS = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Initial Load from ABAP Failed

Hi.
Initial load from ABAP described in following PDF document failed.
Identity Management for SAP System Landscapes: Configuration Guide
http://service.sap.com/~sapidb/011000358700001449662008E
System log Error
lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [C:\WINDOWS\system32\sapjcorfc.dll: Can't find dependent libraries]. java.library.path [C:\Program Files (x86)\Java\j2re1.4.2_16\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32;C:\WINDOWS;......
Environment is
IdM 7.1
NW AS JAVA 7.0 SP 17
Windows 2003 Server 64bit
SQL Server
Any help will be most appreciated !

Hi You Nakamura,
We are facing the same problem during AS ABAP - initial load with the same error message.
I downloaded the msvcp71.dll file and placed it in System32 folder. But the problem remains the same (even after server restart).
The system log shows the same error message and no entries in job log.
Please let me know if you had followed any different way to install the dll file.
Regards,
Vijay.K

Random Bingads WSDL errors: Parsing WSDL: Couldn't load from...failed to load external entity, Could not connect to host, Parsing Schema: can't import schema from

Hi,
I am developing a web tool that accesses client's Bingads accounts via OAUTH2 granting. I am downloading data from clients daily.
Generally it worked, but for 2 days I am experiencing a weird issue, that in random times (but more and more often though) I receive random error messages from Bing server. I am pasting below a few example from my logs (with timestamp and request/response).
Must note that I launch these requests from the server where we have the webapp but also I launch it locally. The same is the result.
The timestamp is in France time (GMT+1).
Thanks ahead!
Best regards,
Steve
2015-01-14 15:08:05: Service\BingAds::initService => SOAP-ERROR: Parsing Schema: can't import schema from 'https://reporting.api.bingads.microsoft.com/Api/Advertiser/Reporting/V9/ReportingService.svc?xsd=xsd0'
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetDetailedBulkDownloadStatusRequest><ns1:RequestId>108277125</ns1:RequestId></ns1:GetDetailedBulkDownloadStatusRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><s:Header><h:TrackingId xmlns:h="https://bingads.microsoft.com/CampaignManagement/v9">XXXXX</h:TrackingId></s:Header><s:Body><GetDetailedBulkDownloadStatusResponse
xmlns="https://bingads.microsoft.com/CampaignManagement/v9"><Errors i:nil="true" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"/><ForwardCompatibilityMap xmlns:a="http://schemas.datacontract.org/2004/07/System.Collections.Generic"
xmlns:i="http://www.w3.org/2001/XMLSchema-instance"/><PercentComplete>100</PercentComplete><RequestStatus>Completed</RequestStatus><ResultFileUrl>https://download.api.bingads.microsoft.com/ReportDownload/Download.aspx?q=XXX</ResultFileUrl></GetDetailedBulkDownloadStatusResponse></s:Body></s:Envelope>
2015-01-15 05:41:39: Service\BingAds::getCampaigns => SoapFault: Could not connect to host
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
(empty response logged)
2015-01-15 05:45:00: Service\BingAds::initService => SOAP-ERROR: Parsing WSDL: Couldn't load from 'https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl' : failed to load external entity "https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl"
2015-01-15 11:58:46: Service\BingAds::getCampaigns =>
---------Soap Fault:--------------------------------------------
SoapFault catched:
Could not connect to host
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
(empty response logged)
2015-01-15 11:59:50: Service\BingAds::initService =>
---------Soap Fault:--------------------------------------------
SoapFault catched:
SOAP-ERROR: Parsing WSDL: Couldn't load from 'https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl' : failed to load external entity "https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl"
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><s:Header><h:TrackingId xmlns:h="https://bingads.microsoft.com/CampaignManagement/v9">XXXXX</h:TrackingId></s:Header><s:Body><GetCampaignsByAccountIdResponse
xmlns="https://bingads.microsoft.com/CampaignManagement/v9"><Campaigns xmlns:i="http://www.w3.org/2001/XMLSchema-instance"></Campaign>........</Campaigns></GetCampaignsByAccountIdResponse></s:Body></s:Envelope>
2015-01-15 12:05:55: Service\BingAds::getCampaigns =>
---------Soap Fault:--------------------------------------------
SoapFault catched:
Could not connect to host
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXXXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXXXXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXXXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
(empty response logged)

Hi,
1. I am using the older version of the PHP library provided by Bing (updated on 1/20/2014), so that is doing the WSDL loadings. I initialize the proxy calling OpticoBingAdsClientProxy providing what it needs, and then do the requests.
2. I have a cron that reads data from client's accounts. I make several calls, like get search query report, get keyword performance report, get keyword bulk data. As the script progressed the first 2 worked and the third gave error. Or in other cases the
first request failed. The calls have quite some time in between them since I process data (sometimes even 160 seconds)
3. I did not change the code ion terms of requests, since as I said I use the PHP library (same credentials, ...).
As of today (2015-01-16 10:30 GMT + 2) running my script, still have the same issues.
Thank you!
Steve

Data loading from ODS toODS

Hi All,
Iam having one source ODS and target also ODS.Can u explain when we have to go for
1. Full Repair.
2.Full Load.
3. Delta Load.
and also pls give the procedure for loading for all the three above said scenarios.
Points will be awarded suitably for the answers.
Thanks in advance gurus.
Regards...
BW World

Hi,
For loading from one ODS to another you use export datasource. Its called a datamart load.
Full load is generally performed once to load all the historical data.
After that you do an init load and deltas will follow which will load only the changed or new records frequently.
Full repair can be said as a Full with selections. But the main use or advantage of Full repair load is that it wont affect delta loads in the system. If you load a full to a target with deltas running you again will have to initialize them for deltas to continue. But if you do full repair it wont affect deltas.
This is normally done we when we lose some data or there is data mismatch between source system and BW.
Check the OSS Note 739863 'Repairing data in BW' for all the details
You need to create an export datasource (8<Source ODS>) and the update rules from Source ODS to target ODS for loading.
Also InfoPackages for Init, Full/Full repair and Delta loads.
Loading procedure had been discussed previously in SDN.
You will get detailed info in SDN.
Thanks,
JituK

Delta and Full load from a single Delta ODS

I have delivered 0DS 0GT_DS01 that is being loaded from R/3 as a delta update. This ODS is then loaded to a delivered InfoCube 0GT_C01 as a delta.
My question is this, can I create update rules and a Infopackage to do a full load from 0GT_DS01 ODS to my custom ODS ZGT_DS01?
I kind of remember from my BW310 class that in release 3.5, if I have an ODS to InfoCube Delta update all other updates from that ODS must be a delta also.
Regards,
Mike...

Siva,
I created my update rule without a problem.
I created the Infopackage with my ZGT_DS01 ODS at the target, the update mode as FULL and I saved the InfoPackage. After SAVE I went to the drop-down menu, Scheduler ==> Initialization For This Datasource and there is a Delta present.
The Infopackage works OK when I run is from RSA1, but when I put the Infopackage in Process ChainI get and error "Delta upload is only possible after successful initialization". What I see in the Manage screen for my ZGT_DS01 ODS is a request for a full load followed by a request for a Delta.
Any Ideas why the infopackage works in RSA1 but not in a process chain?
Regards,
Mike...

Connecting California Instruments to GPIB network

Hi All,
I have connected my california instruments AC power source to my existing GPIB network by using GPIB cable from NI,whereas if i run my Test & Measurement Explorer i am not able to see my device listed.since i am using older labview version 5.1 and test and measurement explorer i have to go for this option. Is there any method where i can query my GPIB device connceted to the network.
If any one has an idea regarding this,kindly let me know.
thanks,
-MAK
Anil-B'lore

Hi MAK,
Thanks for contacting National Instruments.
You should have no problem seeing your power supply from Measurement and Automation Explorer if you are using an NI GPIB board. This is a separate utility from Test & Measurement explorer, but it can be downloaded for free if you don�t currently have it.
To get Measurement and Automation Explorer (MAX), install the latest version of the NI 488.2 driver, available at http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BB9002C14EF?opendocument&node=132060_US.
Installing this driver, which is the latest GPIB hardware driver, will automatically install the current version MAX, 3.0.1, as well. MAX lets you view all the instruments on the bus. The reasons you wouldn�t be able to see the in
strument with MAX is 1) if there was a problem with the instrument, 2) if there was a problem with the GPIB board or cables, or 3) if there was an address conflict, e.g. two instruments set to the same primary address.
MAX is a much newer utility and makes querying the instrument very simple. Just right-click on the instrument as it appears in MAX (under Devices and Interfaces >> GPIBx) and select �Communicate with Instrument.�
Mike G
National Instruments

Chinese characters scrambled when loading from DS to BW

Hi, I've been pulling my hair out with this issue.
I have a flat file containing Chinese text. When I load this in BW using 'FLATFILE' as a source system, it works fine. BW shows the correct Chinese characters.
When I do the same load using BODI, I get funny characters.
When I use BODI to load from one flat file into another flat file, the Chinese characters remain correct.
What do I need to do to make sure I get the right Chinese characters in BW when loading from BODI?
BODI is installed on Unix on Oracle 10.
I run the jobs as batch processes.
The dsconfig.txt has got:
AL_Engine=<default>_<default>.<default>
There are no locale settings in al_env.sh
BW target is UTF-8 codepage.
File codepage is BIG5-HKSCS
BODI is set up as a Unicode system in SAP BW.
When loading flat file to flat file, I get a message:
DATAFLOW: The specified locale <eng_gb.iso-8859-1> has been coerced to <Unicode (UTF-16)
because the datastore <TWIN_FF_CUSTOMER_LOCAL> obtains data in <BIG5-HKSCS> codepage.
JOB: Initializing transcoder for datastore <TWIN_FF_CUSTOMER_LOCAL> to transcode between
engine codepage<Unicode (UTF-16)> and datastore codepage <BIG5-HKSCS>
When loading to BW the messages are almost the same, but now the last step in UTF-16 to UTF-8.
I read the wiki post which definitely helped me to understand the rationale behind code page, but now I ran out of ideas what else to check ( http://wiki.sdn.sap.com/wiki/display/BOBJ/Multiple+Codepages )
Any help would be greatly appreciated.
Jan.

Hi all. Thanks for the Inputs. This is what I got when I clicked on the Details Tab of the Monitor....
Error when transferring data; communication error when analyzing
Diagnosis
Data packages or InfoPackages are missing in BI but there were no apparent processing errors in the source system. It is therefore probable that there was an error in the data transfer.
The analysis tried to read the ALE outbox of the source system. This lead to error .
It is possible that there is no connection to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection to the source system for errors and check the authorizations and profiles of the remote user in both the BI and source systems.
Check th ALE outbox of the source system for IDocs that have not been updated.

Full load from a DSO to a cube processes less records than available in DSO

We have a scenario, where every Sunday I have to make a full load from a DSO with OnHand Stock information to a cube, where I register on material and stoer level a counter if there is stock available.
The DTP has no filters at all and has a semantic group on 0MATERIAL and 0PLANT.
The key in the DSO is:
0MATERIAL
0PLANT
0STOCKTYPE
0STOR_LOC
0BOM
of which only 0MATERIAL, 0PLANT and 0STORE_LOC are later used in the transformation.
As we had a growing number of records, we decided to delete in the START routine all records, where the inventory is not GT zero, thus eliminating zero and negative inventory records.
Now comes the funny part of the story:
Prior to these changes I would [in a test system, just copied from PROD] read some 33 million of records and write out the same amount of records. Of course, after the change we expected to write out less. To my total surprise I was reading now however 45 million of records with the same unchanged DTP, and writing out the expected less records.
When checking the number of records in the DSO I found the 45 million, but cannot explain why in the loads before we only retrieved some 33 millions from the same unchanged amount of records.
When checking in PROD - same result: we have some 45 million records in the DSO, but when we do the full load from the DSO to the cube the DTP only processes some 33 millions.
What am I missing - is there a compression going on? Why would the amount of records in a DSO differ from the amount of records processed in the DataPackgages when I am making a FULL load without any filter restrictions and only a semantic grouping in place for parts of the DSO key?
ANY idea, thought is appreciated.

Thanks Gaurav.
I did check if there were more/any loads doen inbetween - there were none in the test system. As I mentioned that it was a new copy from PROD to TEST, I compared the number of entries in the DSO and that seems to be a match between TEST and PROD, ok a some more in PROD but they can be accounted for. In test I loaded the day before the changes were imported to have a comparison, and between that load and the one ofter the changes were imported nothing in the DSO was changed.
Both DTPs in TEST and PW2 load from actived DSO [without archive]. The DTPs were not changed in quite a while - so I ruled that one out. Same with activation of data in the DSO - this DSO get's loaded and activated in PROD daily via process chain and we load daily deltas into the cube in question. Only on Sundays, for the begin of the new week/fiscal period, we need to make a full load to capture all materials per site with inventory. The deltas loaded during the week are less than 1 million, but the difference between the number of records in the DSO and the amount processed in the DataPackages is more than 10 millions per full load even in PROD.
I really appreciated the knowledgable answer, I just wished you would pointed out something that I missed out on.

Delta records are not loading from DSO to info cube

My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
Shamma

Data is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue.

Data load from DSO to cube

Hi gurus
We have a typical problem, we have to combined 2 records into one when they reach to DSO.
One source is flat file and the other is R3. so few fields I am geting from flat file and few from R3 . They are creating one record when they loaded to DSO . Now I am getting one record in active data table but when I load the data to cube from that DSO ( Data is going from change log to cube ) to cube , I am getting 2 seperate records ( one which is loaded from flat file and one which is loaded from R3 ) in cube which I dont want. I want only one record in cube just like i have in my active data table in DSO.
I cant get the data from Active data table because I need delta load.
Would you please advise what can I do to get that one record in Cube?
Pl help

Ravi
I am sending the data thro DTP only but is there any solution to get one record bcos in other scenario I am getting data from 2 different ERP sources and getting one record in DSO and cube as well.
but that is not happening for this second scenario where i am getting data from FLAT file and ERP and traing to create one record.

3091LD AC LOAD from California Instrument​s Initializa​tion.vi error

Similar Messages

Maybe you are looking for

3091LD AC LOAD from California Instruments Initialization.vi error