3110c Firmware updated, lost chinese display

Dear all, recently I had update my 3110c firmware to ver V07.21 which is the latest firmware, but sad to say my phone now cant display chinese word can don't have chinese input.
Can I know how to install back the chinese display and input format?
Thank you,

Sadly the shop you bought it from has sold you a modified import. They import them from elsewhere then modify the firmware to include the regional languages. This process also voids the warranty.
When the phone is updated it rightly defaults back to the set of languages that it should have originally been installed on it.
To get Chinese back on the phone you will either have to contact the retailer that sold it to you or a nokia care point. You can find details of your nearest care point via the "contact us" link near the top of the page.
Any other unofficial ways of adding languages that you may read about on other forums cannot be discussed here.
Message Edited by psychomania on 19-Jan-2010 01:28 PM

Similar Messages

EFI Firmware Update for Retina Display and Battery Life

I recently installed the EFI firmware update (1.0) for the macbook pro with retina display and have found my battery life has reduced from what used to be 5 hours or so to maybe 2 hours. Furthermore, I have noticed that my computer runs significantly hotter than it used to. Has anyone experienced this and know why this is the case? I would like to restore my battery life.

I've noticed the same thing as well. Any word from Apple?

6680 Firmware update: Contacts not displayed on ph...

Hi, I upgraded my 6680 withe Nokia Software Updater. Before updating my phone I successfully carried out a full back up of the phone and the 64Mb memory card installed in the phone. I used PC Suite 6.8.13.0 to carry out the backup (it used Content Copier v3.0 that is part of PC Suite). The software update completed successfully. I then Restored the phone from my full backup. This appeared to complete successfully. When I attempted to verify the information on the phone I noticed the following: 1. All data, including custom settings (but not 3rd party applications that I had installed) and all messages were restored to the phone. 2. The Contacts are empty on the phone. I then tried the following on the phone: Contacts / Options / Copy - From memory card. This results in no data being copied from the memory card (I do not belive that the contact dats is on the memory card anyway). 3. I have noticed that using the Nokia Phone Browser in Windows Explorer (Windows XP SP2) that I can see all my contacts in the Contacts section. This indicates to me that the contact data is on the phone. I repeated the restore from full back up process and it had exactly the same results. I then tried backup my Phone memory to the 64Mb card with the following thought - if the contact data is on the Phone in Phone memory, and I back it up to the memory card, then I may be able to try restoring the Phone memory from the card and see the contacts again. I was able to successfully back up the Phone memory to the card. I restored the phone from the backup on the card and it completed with a reboot. There is still no contact data visible in the Contact on the phone BUT they are still visible through Windows Explorer/Nokia Phone Browser. I then tried to go to Contacts on the Phone and choose Copy / From memory card. Again there were no contacts to restore (despite the allegedly successful Phone memory backup) and the Contacts on my phone is still empty. Additional information: I do NOT syncronise my Contacts with any application such as Outlook/Lotus Notes etc. This is becomming the straw that will break the camel's back - unless I can get my phone to function the way it should I will NEVER go near another Nokia product again - and ensure that none of may family do either. Any help is greatly appreciated. Regards, Martin

Hey, I can second this! Just upgraded the firmware to V4.04.07 on my 6680 and I have also lost visibility of all my contacts. They are however showing in Nokia PC Suite Contacts section when phone is connected. (PC Suite v6.81.130) I did a full back-up of the phone before upgrading fimware, and then tried to restore afterwards. Initially I had problems restoring and it would freeze after 'messages' but eventually after a couple of attempts it made it to 100percent restored. All data seems to have been restored to the phone ok and everything functions (including tomtom) apart from the contacts. I can even sync my 6680 with Lotus Notes for calendar, to-do etc. ok. The contacts were originally stored on the phone for the extra fucntionality as mentioned by martin above. I have tried copying from Memory Card SIM within the phone and it says there are 0 records, I have tried to sync (update button) the PC Suite with the phone and as mentioned previously this does nothing and returns the error ' The syncronisation has been terminated '. I checked the folder C:\Documents and Settings\user name\Phone Browser\Contacts and there were no VCF files in there at all. I also have the PCsync installed (auto-installed when using PC Suite to read messages on phone) and it made no difference before or after. I have tried adding a contact onto both phone and PC suite and neither will sync to the other, with same error as above. I have destoyed the log as described in C:\Documents and Settings\user name\Application Data\Nokia\PCSync\SynchData and this also made no difference. I am loathed to try the full reset (*#7370#) on the phone as described previously bearing in mind the problems this seems to cause! Did you get past the lock code martin? If I put in new contacts manually into the phone they are saved and work ok - don't fancy doing that over 160 times to re-populate the phone! This is all very dissapointing and not expected of Nokia...strange thing is one of my colleagues has updated several of these phones and never experienced a problem, but this is obviously not unique as a couple of us have raised the point now. Help would be greatly appreciated... Craig (PS format has gone to pot...i did remember to use ENTER!)

E61 firmware update problem - Chinese language los...

I have a E61 which reads and writes English and Simplified Chinese characters. The product code is 0529664 and apparently it was for English and Spanish languages. The English/Chinese language pack was apparently flashed by a third party in Beijing.
After updating the new firmware yesterday, the phone reverts back to English/Spanish. My phone now is essentially a piece of brick living in China!!!
Anyone having a genuine English/Chinese version (identified by a Chinese character "Zhong" on the "Car" key at lower left coner of keyboard) kindly tell me the product code (just below the IMEI code, on the sticker in the battery compartment ) so that I can buy a new E61 with right product code.
Alternatively can someone who has done it tell me how to install a Chinese language pack.
Many thanks,

I have a E61 which reads and writes English and Chinese characters. The product code is 0530096 and apparently it was for English France and Chinese languages.
After updating the new firmware yesterday, the phone reverts back to English/France and Arabic. My phone now is essentially a piece of brick living in China!!!
Anyone having a genuine English/Chinese version (identified by a Chinese character "Zhong" on the "Car" key at lower left coner of keyboard) kindly tell me the product code (just below the IMEI code, on the sticker in the battery compartment ) so that I can buy a new E61 with right product code.
Alternatively can someone who has done it tell me how to install a Chinese language pack.
Many thanks,

Firmware update lost connection to my Time capsule

I have just downloaded the latest firmware to my time capsule, and now cannot reconnect. Please don't tell me that I have to reset it because it must have taken 2 days for the 1st download to complete. This was after many failed attempts.
HELP

This is what I did:
1st Press & hold the reset button until the LED flashes amber
2nd Launch Airport Utility & let it scan and find the Time capsule
3rd select that you want to config the device manually
4th The next menu will show the current configuration, at this point move your curser to the point that shows the firmware version. Click and you should be able to select the previous firmware version.The device should then be loaded with the this version.
Then I closed then relaunched Airport Utility and used the assistant to cinfigure the device.
Not sure if this will cure your problem but I have been trying all day and this is the only thing that worked.
Hope you get it solved

Most recent imac firmware update resets operating system back to snow leopard

I bought this computer when Lion was just coming out, so it still had the snow leopard OS. I have upgraded to Lion OS and updated all my software. This evening I get notice of a firmware update and iPhoto 9.2.1. I just did the install, and my computer is back to Snow Leopard 10.6.8. Just tried the Lion recovery disk I made on a USB not too long ago and that does not launch, and my Time Machine backup is showing the state it was before I upgraded to Lion.
Do I have to do everything over again? App store is showing that I have a Lion 10.7.2 available update.

OK I think I figured out what happened. Before I did do the lion OS update I had partitioned my hard drive, so that I still had a small section for snow leopard. I think the firmware update lost the fact that I had my startup disk set as the Lion one and set me back into the snow leopard one. I just booted into the Lion section and everything is still there, so no data lost.
Now that I have done with using snow leopard, I might as well departition the hard drive, and maybe this won't happen again.

E52 unable to update firmware - connection lost

When I use the E52 Device Manager control panel to check for new software updates it informs me that a new version of the firmware is available "v.022.009", I select "Accept" to download the update and the display stays on the "Downloading" screen without indicating any progress and then eventually says "Connection lost during download".
I'm using a WiFi connection to the internet.
Any ideas as to why the update will not download?

Are you using Nokia PCSuite with Software updater? Connect with a compatible USB cable. That's the best secure way to perform an update.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

27 inch thunderbolt display blacks out after Thunderbolt Firmware Update 1.2

Bought 2 new 27 inch TB displays for two different machines and after a couple of days the Thunderbolt Firmware Update 1.2 appears on my Mac Pro with one of the displays installed. So I install the firmware update. Now my display blacks out periodically and I keep getting Graphic Display Errors with a request to sent the errors to Apple. Running a 32 GB Mac Pro (late 2013 circular style) I have three monitors connected (two 20 inch cinema displays and the new 27 inch display). This machine is supposed to be able to handle three 4k monitors or 6 standard TB displays. I've seen the posts about the blacking out with this monitor but I didn't have any problems before the firmware update and now I've got them pretty regularly. I had the blacking out problem on an earlier monitor and took one of the monitors back and Apple gave me another one and this is the replacement. Same problem, but this one only started after the update. I'm hoping someone from Apple reads these messages and can let me know what's up.
BTW, I also have an older 27 inch Apple monitor that ran perfectly on this machine so I'm disappointed that I spent all this money and now get the blacking out issue.
Mac Pro (Late 2013)
Processor 3.7 GHz Quad-Core Intel Xeon E5
Memory 32 BG
Graphics AMD FirePro D300 2048 MB

I have my Thunderbolt display connected to my MacBook Pro and have been experiencing the same issue, getting worse over time. The folks at my local Apple store did not know what to do about it. So, I looked around and tried different thing.
The one thing that seems to be working is to System Preferences > Build-in Display > uncheck “Automatically adjust brightness.”
I hope this helps.

Thunderbolt Display USB ports not working after 1.2 firmware update

I installed the Thunderbolt Display Firmware Update 1.2 a few days back, and following that update, the USB ports on my display have stopped working completely. The display's Thunderbolt port and Ethernet jacks are working fine, as is the Thunderbolt/power cable connection to my MacBook Air (mid-2011, 11 inch, running OS X Yosemite 10.10.1). Any ideas on a fix?

Do an SMC and PRAM reset.

IMac won't start with Thunderbolt Display connected after firmware update

After updating my thunderbolt display firmware to version 1.2 this morning via the App Store, my mid-2014 iMac won't start up with the external display connected. I can get the iMac to start up only by disconnecting the display's thunderbolt connector. After the iMac comes up, I can reconnect the display and everything appears to function normally. I've tried several restarts and the iMac won't start up with the display connected. Anyone else experience this?

Hello rameta,
It may help to reset your Mac's SMC and PRAM.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Reset your computer’s PRAM
http://support.apple.com/kb/HT1379
Cheers,
Allen

Thunderbolt display firmware update 1.2 won't install correctly

On Friday 11/13/2014, I received a Software Update notification in OS X Yosemite 10.10.1 that there was an update available for "Thunderbolt Display Firmware Update 1.2". I tried installing this several times, but every time it tells me "The Thunderbolt Display Firmware Update could not complete." Now I have 6 failed install attempts showing in Software Update, plus still the still to be installed update itself.
If I click on the "More info" button in the failed installation message, it takes me to this page: About Thunderbolt Display Firmware Update 1.2 - Apple Support
On that page it suggest to check the "About this Mac" info for Thunderbolt Display, where "The Firmware Version should be 26.2 and the Port Micro Firmware Version should be 2.0.7 after the update."
My Thunderbolt Display is currently on Firmware Version 22.2, with Port Micro Firmware Version 0.0.21. Why won't this update install?

I had a similar problem: The "Thunderbolt display firmware update 1.2" kept reappearing in AppStore, even though the uppdate seemed successful.
According to Apple[1] the update was successful when the the Firmware Version is 26.2 and the Port Micro Firmware Version is 2.0.7 (visible in About this Mac -> SystemReport).
Above versions were correct in my case, but the update still kept appering in AppStore... (probably I did download and install the update manually after the first failure, but I don't remember ...)
To get rid of the annoying update in AppStore I used the softwareupdate command[2] on the commandline:
softwareupdate --ignore TBdisplayFWUpdate1.2
[1]: https://support.apple.com/en-us/HT204450
[2]: https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man8/softwareupdate.8.html

2.1 firmware update listed signal strength display fix in its release notes

Summary to those who haven't read Apple's latest letter to iPhone 4 owners:
Apple is saying 'death grip' only affects the graphics of the signal strength not signal itself. Who accepts that? And will therefore fix this in the next firmware update.
But wait! This seems to be fixed in the 2.1 firmware update already!
See 2.1 firmware update changelogs.
Google it, I don't want to post direct link as Apple may start pulling that information down.
Message was edited by: Venomrush

Letter from Apple Regarding iPhone 4
(emphasis mine)
{quote}the formula we use to calculate how many bars of signal strength to display *is totally wrong.*{quote}
{quote}We will issue a free software update within a few weeks that incorporates the corrected formula. *Since this mistake has been present since the original iPhone*, this software update will also be available for the iPhone 3GS and iPhone 3G.{quote}
But the 2.1 firmware had in it's release notes as one of the improvements:
{quote}improved accuracy of the 3G signal strength display{quote}
So in 2.1 they improved the accuracy of a totally wrong formula?
Something is rotten in Denmark.

Canceling Cinema Display Firmware Update

I accidentally selected to update the Cinema Display iSight from the Software Update list but I do not own a Cinema Display. Now every time I start my computer up I get a prompt asking me to connect to a Cinema Display so I can update it's firmware. How do I get this to stop trying to complete the update?

Go into your login items and remove it

Can't stop Thunderbolt display from flickering white lines after firmware update (Yosemite)

I am having serious issues after the Thunderbolt Display Firmware Update 1.2. Running Yosemite on MacBook Pro and I am now getting white lines that gradiate from the bottom to the top of my screen across multiple browsers, apps and even the finder window anytime I move my mouse. I cannot take a screenshot (it stops when I try) but I posted a video here:
http://youtu.be/3zOKL1JFp5M
It is impossible to work this way and after 20 minutes of watching my screen constantly refresh anytime I move my mouse I am feeling nauseous.
Is there anyway to UNINSTALL this firmware update? I was not having this kind of problem before. Every once in awhile I was finding my Thunderbolt display would not wake up after sleep and I thought the firmware update would fix that, not cause more, crazier problems. It is causing this gradiating line problem on my Thunderbolt display AND my MacBook Pro screen, which is even more bizarre.

I updated and no issues with my 2012 Mini so may be computer related. I believe once a firmware has been "burned" into the chip it cannot be redone.

Early 2011 Macbook external display issues after firmware update

I have a 2011 MBPro 15". After performing the firmware update in late April, I have continual issues when I connect my monitor. The screen is blank and I can move the mouse tap the keyboard etc. The display may come up for a scond and then it will close and the machine goes back to sleep. More wiggling and the process starts over.
If I raise the lid it may bing up the external display. Restarting is the only sure fix.
I also was unable to make a presentation today because the projector I was connected to would not show the MBP display.
I tried all the key combinations, detect display etc. and nothing.
Can I somehow go back to the prior firmware? Other solutions?
SMC Version (system): 1.69f1
EFI Driver Version: 01.00.521

I recently did a software update to my MacBook pro and had a similar issue, on restart it gets to the apple logo then just shuts off, after multiple hours on the phone with apple care they told me that it was coincidence that it happened at the same time as the update and it would be costly to repair as it was either something to do with display or logic board. I took my MacBook into my retail location I bought it from and was told that they have had MULTIPLE people bring in macbooks with the SAME issue (I live in a really small city so the amount of people is quite large proportion wise) and that they could fix the issue by remotely resetting the MacBook at a cost of $130-$150. Relatively cheap considering what I was fearing, but if this is a common problem related to Apples update why are we paying to fix it and why is apple support saying its something major???

3110c Firmware updated, lost chinese display

Similar Messages

Maybe you are looking for