3G Restore error: unable to find AppleNANDFTL

Hello everybody,
My phone 3G  gives error 28, after repair to 4.2.1 (tried several times)
Also after downgrade to 3.1.3
Below the complete log during the repaier with 3.1.3
Does anybody know with part of the phone has to be replaced.?
Today already a new full battery, but after 6 hours he must be loaded, i think there is no load because after 3 hours still red line on battery.
reg Co
2012-02-29 13:53:22.000 iTunes[520:207]: restore library built Oct          4
2011 at 18:50:31
2012-02-29 13:53:22.000 iTunes[520:207]: iTunes: iTunes 10.5.2
2012-02-29 13:53:22.000 iTunes[520:207]: iTunes: Software payload version: 8C148
2012-02-29 13:53:27.000 iTunes[520:1c65b]: iTunes: Specifying UOI
boot image
2012-02-29 13:53:28.000 iTunes[520:1c65b]: amai: AMAuthInstallSsoInitialize: can't find SSOClient.framework
2012-02-29 13:53:28.000 iTunes[520:1c65b]: requested restore behavior: Erase
2012-02-29 13:53:28.000 iTunes[520:1c65b]: *** UUID E70F6368-7363-4A5E-B78A-585129B857C6 ***
2012-02-29 13:53:28.000 iTunes[520:1c65b]: amai: AMAuthInstallDebugWriteObject: debug object written: file:// localhost/tmp/PersonalizedRestoreBundle.iencsHJcFm/amai/debug/ tss-request.plist
2012-02-29 13:53:29.000 iTunes[520:1c65b]: amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
2012-02-29 13:53:29.000 iTunes[520:1c65b]: amai: AMAuthInstallDebugWriteObject: debug object written: file:// localhost/tmp/PersonalizedRestoreBundle.iencsHJcFm/amai/debug/ tss-response.plist
2012-02-29 13:53:30.000 iTunes[520:1c65b]: amai:
_AMAuthInstallBundleInstallPersonalizedEntry: entry "KernelCache" has been previously personalized; skipping it
2012-02-29 13:53:30.000 iTunes[520:1c65b]: amai:
_AMAuthInstallBundleInstallPersonalizedEntry: entry "DeviceTree" has been previously personalized; skipping it
2012-02-29 13:53:30.000 iTunes[520:1c65b]: amai:
_AMAuthInstallBundleInstallPersonalizedEntry: entry "AppleLogo" has been previously personalized; skipping it
2012-02-29 13:53:31.000 iTunes[520:19563]: iBoot build-version =
iBoot-931.71.16
2012-02-29 13:53:31.000 iTunes[520:19563]: iBoot build-style = RELEASE
2012-02-29 13:53:31.000 iTunes[520:19563]: DeviceRequest failed:
0xe000404f
2012-02-29 13:53:31.000 iTunes[520:19563]: command device request for
'getenv radio-error' failed: 2008
2012-02-29 13:53:31.000 iTunes[520:19563]: radio-error not set
2012-02-29 13:53:31.000 iTunes[520:19563]: unable to open device_map.txt: No such file or directory
2012-02-29 13:53:31.000 iTunes[520:19563]: <Recovery Mode Device
0x22dd5420>: production fused device
2012-02-29 13:53:31.000 iTunes[520:19563]: <Recovery Mode Device
0x22dd5420>: operation 4 progress -1
2012-02-29 13:53:31.000 iTunes[520:19563]: bootstrapping restore with iBEC
2012-02-29 13:53:31.000 iTunes[520:19563]: <Recovery Mode Device
0x22dd5420>: operation 31 progress -1
2012-02-29 13:53:32.000 iTunes[520:19563]: <Recovery Mode Device
0x22dd5420>: Recovery mode succeeded
2012-02-29 13:53:32.000 iTunes[520:207]: device disconnected (isDFU =
0)
2012-02-29 13:53:32.000 iTunes[520:207]:
_AMRecoveryModeDeviceFinalize: 0x22dd5420
2012-02-29 13:53:37.000 iTunes[520:207]: device connected (isDFU = 0)
2012-02-29 13:53:37.000 iTunes[520:207]: device software does not support nonce generation
2012-02-29 13:53:37.000 iTunes[520:207]: device software does not support nonce generation
2012-02-29 13:53:37.000 iTunes[520:207]: iTunes: SCEP 5
2012-02-29 13:53:37.000 iTunes[520:198c3]: iBoot build-version =
iBoot-931.71.16
2012-02-29 13:53:37.000 iTunes[520:198c3]: iBoot build-style = RELEASE
2012-02-29 13:53:37.000 iTunes[520:198c3]: DeviceRequest failed:
0xe000404f
2012-02-29 13:53:37.000 iTunes[520:198c3]: command device request for
'getenv radio-error' failed: 2008
2012-02-29 13:53:37.000 iTunes[520:198c3]: radio-error not set
2012-02-29 13:53:37.000 iTunes[520:198c3]: <Recovery Mode Device
0xbba1df0>: operation 44 progress -1
2012-02-29 13:53:37.000 iTunes[520:198c3]: requested restore behavior: Erase
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"RestoreLogo" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"RestoreDeviceTree" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreKernelCache" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"RestoreRamDisk" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"KernelCache" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"BatteryLow1" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"BatteryLow0" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry "iBoot" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"DeviceTree" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"BatteryCharging1" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"BatteryCharging" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"AppleLogo" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"BatteryPlugin" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"BatteryFull" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"BatteryCharging0" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"RecoveryMode" has been previously personalized; skipping it
2012-02-29 13:53:37.000 iTunes[520:198c3]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
2012-02-29 13:53:37.000 iTunes[520:198c3]: unable to open device_map.txt: No such file or directory
2012-02-29 13:53:37.000 iTunes[520:198c3]: <Recovery Mode Device
0xbba1df0>: production fused device
2012-02-29 13:53:37.000 iTunes[520:198c3]: <Recovery Mode Device
0xbba1df0>: operation 4 progress -1
2012-02-29 13:53:38.000 iTunes[520:198c3]: <Recovery Mode Device
0xbba1df0>: operation 42 progress -1
2012-02-29 13:53:39.000 iTunes[520:198c3]: <Recovery Mode Device
0xbba1df0>: operation 5 progress -1
2012-02-29 13:53:39.000 iTunes[520:198c3]: DeviceRequest failed:
0xe000404f
2012-02-29 13:53:39.000 iTunes[520:198c3]: command device request for
'getenv ramdisk-delay' failed: 2008
2012-02-29 13:53:42.000 iTunes[520:198c3]: <Recovery Mode Device
0xbba1df0>: operation 6 progress -1
2012-02-29 13:53:43.000 iTunes[520:198c3]: <Recovery Mode Device
0xbba1df0>: operation 7 progress -1
2012-02-29 13:53:43.000 iTunes[520:198c3]: <Recovery Mode Device
0xbba1df0>: operation 8 progress -1
2012-02-29 13:53:43.000 iTunes[520:198c3]: <Recovery Mode Device
0xbba1df0>: operation 9 progress -1
2012-02-29 13:53:43.000 iTunes[520:198c3]: <Recovery Mode Device
0xbba1df0>: Recovery mode succeeded
2012-02-29 13:53:45.000 iTunes[520:207]: device disconnected (isDFU =
0)
2012-02-29 13:53:45.000 iTunes[520:207]:
_AMRecoveryModeDeviceFinalize: 0xbba1df0
2012-02-29 13:53:51.000 iTunes[520:15f03]: received kAMDeviceAttached action, device 0xbba1df0, AFC error 0XE8000028
2012-02-29 13:53:51.000 iTunes[520:15f03]: iTunes: Restore-mode device appeared, device 0xbba1df0
2012-02-29 13:53:51.000 iTunes[520:15f03]: iTunes: Creating restore mode device with usbMuxDeviceID 0X1
2012-02-29 13:53:51.000 iTunes[520:15f03]: <Restore Device
0x22c70310>: operation 3 progress -1
2012-02-29 13:53:51.000 iTunes[520:15f03]: <Restore Device
0x22c70310>: operation 4 progress -1
2012-02-29 13:53:51.000 iTunes[520:15f03]: Supports value queries: 1
2012-02-29 13:53:51.000 iTunes[520:1be67]: <Restore Device
0x22c70310>: operation 44 progress -1
2012-02-29 13:53:51.000 iTunes[520:1be67]: requested restore behavior: Erase
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"RestoreLogo" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"RestoreDeviceTree" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreKernelCache" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"RestoreRamDisk" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"KernelCache" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"BatteryLow1" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"BatteryLow0" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry "iBoot" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"DeviceTree" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"BatteryCharging1" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"BatteryCharging" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"AppleLogo" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"BatteryPlugin" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"BatteryFull" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"BatteryCharging0" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry
"RecoveryMode" has been previously personalized; skipping it
2012-02-29 13:53:51.000 iTunes[520:1be67]: amai:
_AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
2012-02-29 13:53:51.000 iTunes[520:1be67]: device did not return saved USB log
2012-02-29 13:53:51.000 iTunes[520:1be67]: device did not return saved panic log
2012-02-29 13:53:51.000 iTunes[520:1be67]: previous restore failed with exit status 0x100
2012-02-29 13:53:51.000 iTunes[520:1be67]: connected to service com.apple.mobile.restored
2012-02-29 13:53:51.000 iTunes[520:1be67]: using protocol version 12
2012-02-29 13:53:51.000 iTunes[520:1be67]: unable to open device_map.txt: No such file or directory
2012-02-29 13:53:51.000 iTunes[520:1be67]: board config = n82ap
2012-02-29 13:53:51.000 iTunes[520:1be67]: value query for
'HardwareModel' returned 'N82AP'
2012-02-29 13:53:51.000 iTunes[520:1be67]: Can't return padding information since it's not in the Restore.plist
2012-02-29 13:53:51.000 iTunes[520:1be67]: No padding dictionary found in restore bundle. Continuing...
2012-02-29 13:54:01.000 iTunes[520:1be67]: device returned AMR error
28
2012-02-29 13:54:01.000 iTunes[520:1be67]:
==== device restore output ====
t powered on (0x5)
AppleMRVL868x: Loading Main Program
AppleMRVL868x: Firmware loaded.
AirPort: Link Down on en0. Reason 1 (Unspecified).
AppleMRVL868x: Command line options and current values used by driver
AppleMRVL868x:          marvel-debug=0x88
AppleMRVL868x:          marvell-feature-flags=0x3f
AppleMRVL868x:          mrvl.ps.unicast_timeout=100
AppleMRVL868x:          mrvl.ps.multicast_timeout=10
AppleMRVL868x:          mrvl.ps.entrance_timeout=15
AppleMRVL868x:          marvell-powersave-listenint=1
AppleMRVL868x:          marvell-retry-limit=15
AppleMRVL868x:          marvell-sdio-pulldowns=-1
AppleMRVL868x:          WTE=0x0
AppleMRVL868x Hardware Details:
Firmware Version: 9.108.5.p3 (0x03096c05) I/O Version:          0x0002
Hardware Version: 0x0012
Mac Address:          60:fb:42:9a:a1:8a display-scale = 1
display-rotation = 0
found suitable IOMobileFramebuffer: AppleH1CLCD
display: 320 x 480 found PTP interface
AppleSynopsysOTGDevice - Configuration: PTP AppleSynopsysOTGDevice          Interface: PTP AppleSynopsysOTGDevice - Configuration: iPod USB Interface AppleSynopsysOTGDevice          Interface: USBAudioControl AppleSynopsysOTGDevice          Interface: USBAudioStreaming AppleSynopsysOTGDevice          Interface: IapOverUsbHid AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device AppleSynopsysOTGDevice          Interface: PTP AppleSynopsysOTGDevice          Interface: AppleUSBMux AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device +
Apple USB Ethernet
AppleSynopsysOTGDevice          Interface: PTP AppleSynopsysOTGDevice          Interface: AppleUSBMux AppleSynopsysOTGDevice          Interface: AppleUSBEthernet AppleSynopsysOTGDevice::gated_registerFunction Register function
USBAudioControl
AppleSynopsysOTGDevice::gated_registerFunction Register function
USBAudioStreaming IOAccessoryPortUSB::start AppleSynopsysOTGDevice::gated_registerFunction Register function
IapOverUsbHid
virtual bool AppleUSBDeviceMux::start(IOService*) build: Oct 21 2010
21:07:47 init_waste
AppleSynopsysOTGDevice::gated_registerFunction Register function
AppleUSBMux
AppleSynopsysOTGDevice::gated_registerFunction Register function
AppleUSBEthernet
AppleUSBEthernetDevice::start: local-mac-address not found for device in the device-tree, generating a fake one
AppleUSBEthernetDevice::start: Host MAC address = 62:fb:42:9a:a1:8a AppleSynopsysOTGDevice::gated_registerFunction Register function PTP AppleSynopsysOTGDevice::gated_registerFunction all functions
registered- we are ready to start usb stack
AppleS5L8900XUSBPhy::powerUp : _powered: 0
AppleEmbeddedUSBArbitrator::enableDeviceClock : enable: 1, index: 0
AppleS5L8900XUSBPhy::enableDeviceMode : enable: 1
IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject*) setting debug level to 7
AppleSynopsysOTGDevice::handleUSBReset recv(7, 4) failed: connection closed unable to read message size: -1
could not receive message
close(caller = 0x73ac): remote port = 49152 recv(7, 4) failed: connection closed
unable to read message size: -1 could not receive message
close(caller = 0x73ac): remote port = 49153 recv(8, 4) failed: connection closed
unable to read message size: -1 could not receive message
close(caller = 0x73ac): remote port = 49154 recv(7, 4) failed: connection closed
unable to read message size: -1 could not receive message
close(caller = 0x73ac): remote port = 49155 recv(8, 4) failed: connection closed
unable to read message size: -1 could not receive message
close(caller = 0x73ac): remote port = 49156 recv(13, 4) failed: connection closed
unable to read message size: -1 could not receive message
close(caller = 0x73ac): remote port = 49159 recv(9, 4) failed: connection closed
unable to read message size: -1 could not receive message
close(caller = 0x73ac): remote port = 49158 recv(9, 4) failed: connection closed
unable to read message size: -1 could not receive message
close(caller = 0x73ac): remote port = 49160 recv(9, 4) failed: connection closed
unable to read message size: -1 could not receive message
close(caller = 0x73ac): remote port = 49161 client protocol version 12
unable to open /usr/local/share/restore//options.n82.plist: No such file or directory
*** UUID E70F6368-7363-4A5E-B78A-585129B857C6 *** Restore options:
UUID          => <CFString 0xd157a0 [0x200a6c]>
{contents = "E70F6368-7363-4A5E-B78A-585129B857C6"}
SystemPartitionSize          => <CFNumber 0xd10cd0 [0x200a6c]>
{value = +680, type = kCFNumberSInt64Type}
entering partition_nand_device
device is not a boot-from-NAND device entering wait_for_storage_device
waiting for matching IOKit service: <CFBasicHash 0xd17a60 [0x200a6c]>
{type = mutable dict, count = 1, entries =>
2 : <CFString 0x333dbc [0x200a6c]>{contents = "IOProviderClass"}
= <CFString 0xd13a30 [0x200a6c]>{contents = "AppleNANDFTL"}
AppleUSBDeviceMux::handleConnectResult new session 0x82ee7e80 established 62078<-lo0->49152 62078<-usb->512
void AppleUSBDeviceMux::handleMuxTCPInput( mbuf*) received reset, closing 0x82ee7e80
AppleUSBDeviceMux::handleConnectResult new session 0x830cc280 established 62078<-lo0->49153 62078<-usb->768
AppleUSBDeviceMux::handleConnectResult new session 0x830cc200 established 62078<-lo0->49154 62078<-usb->1024
void AppleUSBDeviceMux::handleMuxTCPInput( mbuf*) received reset, closing 0x830cc280
AppleUSBDeviceMux::handleConnectResult new session 0x82ee7e80 established 62078<-lo0->49155 62078<-usb->1280
void AppleUSBDeviceMux::handleMuxTCPInput( mbuf*) received reset, closing 0x830cc200
AppleUSBDeviceMux::handleConnectResult new session 0x830cc280 established 62078<-lo0->49156 62078<-usb->1536
void AppleUSBDeviceMux::handleMuxTCPInput( mbuf*) received reset, closing 0x82ee7e80
void AppleUSBDeviceMux::handleMuxTCPInput( mbuf*) received reset, closing 0x830cc280
AppleUSBDeviceMux::handleConnectResult new session 0x82ee7e80 established 62078<-lo0->49157 62078<-usb->1792
AppleUSBDeviceMux::handleConnectResult new session 0x830cc380 established 62078<-lo0->49158 62078<-usb->2048
void AppleUSBDeviceMux::handleMuxTCPInput( mbuf*) received reset, closing 0x830cc380
AppleUSBDeviceMux::handleConnectResult new session 0x830cc280 established 62078<-lo0->49159 62078<-usb->2304
void AppleUSBDeviceMux::handleMuxTCPInput( mbuf*) received reset, closing 0x830cc280
AppleUSBDeviceMux::handleConnectResult new session 0x830cc280 established 62078<-lo0->49160 62078<-usb->2560
void AppleUSBDeviceMux::handleMuxTCPInput( mbuf*) received reset, closing 0x830cc280
AppleUSBDeviceMux::handleConnectResult new session 0x830cc380 established 62078<-lo0->49161 62078<-usb->2816
void AppleUSBDeviceMux::handleMuxTCPInput( mbuf*) received reset, closing 0x830cc380
waiting for matching IOKit service: <CFBasicHash 0xd17a60 [0x200a6c]>
{type = mutable dict, count = 1, entries =>
2 : <CFString 0x333dbc [0x200a6c]>{contents = "IOProviderClass"}
= <CFString 0xd13a30 [0x200a6c]>{contents = "AppleNANDFTL"}
waiting for matching IOKit service: <CFBasicHash 0xd17a60 [0x200a6c]>
{type = mutable dict, count = 1, entries =>
2 : <CFString 0x333dbc [0x200a6c]>{contents = "IOProviderClass"}
= <CFString 0xd13a30 [0x200a6c]>{contents = "AppleNANDFTL"}
waiting for matching IOKit service: <CFBasicHash 0xd17a60 [0x200a6c]>
{type = mutable dict, count = 1, entries =>
2 : <CFString 0x333dbc [0x200a6c]>{contents = "IOProviderClass"}
= <CFString 0xd13a30 [0x200a6c]>{contents = "AppleNANDFTL"}
unable to find AppleNANDFTL
==== end of device restore output ====
2012-02-29 13:54:01.000 iTunes[520:1be67]: AMRAuthInstallDeletePersonalizedBundle
2012-02-29 13:54:01.000 iTunes[520:1be67]: <Restore Device
0x22c70310>: Restore failed (result = 28)
2012-02-29 13:54:01.000 iTunes[520:1c743]: iTunes: Restore error 28

-cobo- wrote:
Hello everybody,
My phone 3G  gives error 28, after repair to 4.2.1 (tried several times)
Also after downgrade to 3.1.3
Sorry, but downgrading iOS is not supported and is considered an unauthorized modification to the phone. In other words, you hacked your phone.
If you had any warranty, it is void. You have also forfeited your right to support from Apple or on these forums.  Discussing hacked, jailbroken, or otherwise modified phones is forbidden here by the terms of service. You'll have to look elsewhere for help.

Similar Messages

  • Backint failed "ERROR: unable to find file "

    Hello
    I try to backup Oracle database 10.2 with netbackup tools on Redhat 2.6.18-53
    I got errror:
    BR0231E Backup utility call failed
    ERROR: unable to find file /oracle/BWP/sapdata4
    Can u help me
    Regards
    Fethi

    This is the backup logfile:
    BR0477I Oracle pfile /oracle/BWP/102_64/dbs/initBWP.ora created from spfile /oracle/BWP/102_64/dbs/spfileBWP.ora
    BR0101I Parameters
    Name                           Value
    oracle_sid                     BWP
    oracle_home                    /oracle/BWP/102_64
    oracle_profile                 /oracle/BWP/102_64/dbs/initBWP.ora
    sapdata_home                   /oracle/BWP
    sap_profile                    /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.sap
    backup_mode                    ALL
    backup_type                    offline
    backup_dev_type                util_file
    util_par_file                  /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
    system_info                    orabwp/orabwp hpbwpdb2 Linux 2.6.18-53.1.19.el5 #1 SMP Tue Apr 22 03:01:10 EDT 2008 x86_64
    oracle_info                    BWP 10.2.0.2.0 8192 30 88160883 hpbwpdb2 WE8DEC UTF8
    sap_info                       700 SAPSR3 BWP S1329078236 R3_ORA 0020159289
    make_info                      linuxx86_64 OCI_102 Feb  8 2008
    command_line                   brbackup -c force -p initBWP_sapdata_offline.sap
    BR0116I ARCHIVE LOG LIST before backup for database instance BWP
    Parameter                      Value
    Database log mode              No Archive Mode
    Automatic archival             Disabled
    Archive destination            /oracle/BWP/oraarch/BWParch
    Archive format                 %t_%s_%r.dbf
    Oldest online log sequence     27
    Next log sequence to archive   30
    Current log sequence           30               SCN: 88160883
    Database block size            8192             Thread: 1
    Current system change number   88168768         ResetId: 655409152
    BR0118I Tablespaces and data files
    Tablespace     TS-Status  F-Status  File                                                       Size   Id.     Device  Link    Type       MaxSize     IncrSize  BlkSize
    PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data1                      17498636288    4       64785  NOLINK  FILE   34359721984    104857600     8192
    PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data2                      16450060288    5       64785  NOLINK  FILE   34359721984    104857600     8192
    PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data3                      15820914688    6       64785  NOLINK  FILE   34359721984    104857600     8192
    PSAPBWP700     ONLINE*    ONLINE+   /oracle/BWP/sapdata2/BWM700.data1                   15128862720   11       64784  NOLINK  FILE   34359721984    104857600     8192
    PSAPBWP700     ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM700.data2                    4132511744   12       64785  NOLINK  FILE   34359721984         8192     8192
    PSAPBWPDIM     ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMdim.data1                    4202700800    7       64770  NOLINK  FILE   10485760000     20971520     8192
    PSAPBWPFACT    ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMfact.data1                   6719283200    8       64770  NOLINK  FILE   34359721984     20971520     8192
    PSAPBWPODS     ONLINE*    ONLINE+   /oracle/BWP/sapdata2/BWMods.data1                   19868426240    9       64784  NOLINK  FILE   34359721984     20971520     8192
    PSAPBWPUSR     ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMusr.data1                     239083520   10       64770  NOLINK  FILE   10485760000     20971520     8192
    PSAPSR3USR     ONLINE+    ONLINE+   /oracle/BWP/sapdata4/sr3usr_1/sr3usr.data1            134225920   20       64785  NOLINK  FILE   10485760000     20971520     8192
    PSAPTEMP       ONLINE#    ONLINE+   /oracle/BWP/sapdata1/temp_1/temp.data1              10485768192   -1       64770  NOLINK  FILE   34358689792     20971520     8192
    PSAPUNDO       ONLINE-    ONLINE+   /oracle/BWP/sapdata1/undo_1/undo.data1               1073750016    2       64770  NOLINK  FILE   34359721984     20971520     8192
    SYSAUX         ONLINE*    ONLINE+   /oracle/BWP/sapdata1/sysaux_1/sysaux.data1            671096832    3       64770  NOLINK  FILE   10485760000     20971520     8192
    SYSTEM         ONLINE*    SYSTEM+   /oracle/BWP/sapdata1/system_1/system.data1            838868992    1       64770  NOLINK  FILE   10485760000     20971520     8192
    BR0119I Redo log files
    File                                                Size  Group     Device  Status    Link    Type
    /oracle/BWP/origlogA/log_g11m1.dbf              52429312    1        64774  INUSE     NOLINK  FILE
    /oracle/BWP/mirrlogA/log_g11m2.dbf              52429312    1        64776  INUSE     NOLINK  FILE
    /oracle/BWP/origlogB/log_g12m1.dbf              52429312    2        64775  INUSE     NOLINK  FILE
    /oracle/BWP/mirrlogB/log_g12m2.dbf              52429312    2        64777  INUSE     NOLINK  FILE
    /oracle/BWP/origlogA/log_g13m1.dbf              52429312    3        64774  INUSE     NOLINK  FILE
    /oracle/BWP/mirrlogA/log_g13m2.dbf              52429312    3        64776  INUSE     NOLINK  FILE
    /oracle/BWP/origlogB/log_g14m1.dbf              52429312    4        64775  INUSE     NOLINK  FILE
    /oracle/BWP/mirrlogB/log_g14m2.dbf              52429312    4        64777  INUSE     NOLINK  FILE
    BR0120I Control files
    File                                                Size   Id.      Device  Link    Type
    /oracle/BWP/origlogA/cntrl/cntlrBWP.dbf         34979840    0        64774  NOLINK  FILE
    /oracle/BWP/origlogB/cntrl/cntrlBWP.dbf         34979840    0        64775  NOLINK  FILE
    /oracle/BWP/sapdata1/cntrl/cntrlBWP.dbf         34979840    0        64770  NOLINK  FILE
    BR0616I Tablespaces in table TSORA for SAP owner SAPSR3:
    PSAPBWP, PSAPBWP700, PSAPBWPDIM, PSAPBWPFACT, PSAPBWPODS,
    PSAPBWPUSR
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
    BR0057I Backup of database: BWP
    BR0058I BRBACKUP action ID: bdxzgdlt
    BR0059I BRBACKUP function ID: aff
    BR0110I Backup mode: ALL
    BR0077I Database files for backup:
    /oracle/BWP/origlogA/log_g11m1.dbf
    /oracle/BWP/origlogB/log_g12m1.dbf
    /oracle/BWP/origlogA/log_g13m1.dbf
    /oracle/BWP/origlogB/log_g14m1.dbf
    /oracle/BWP/origlogA/cntrl/cntlrBWP.dbf
    BR0061I 19 files found for backup, total size 108250.510 MB
    BR0143I Backup type: offline
    BR0130I Backup device type: util_file
    BR0109I Files will be saved by backup utility
    BR0134I Unattended mode with 'force' active - no operator confirmation allowed
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
    BR0307I Shutting down database instance BWP ...
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
    BR0308I Shutdown of database instance BWP successful
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
    BR0229I Calling backup utility with function 'backup'...
    BR0278I Command output of '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c':
    WARNING: unknown parameter: print_log_flag 1
    WARNING: sort_backup_type not specified in .utl file
    WARNING: default sort_backup_type to <size> for restore
    Program:                /usr/sap/BWP/SYS/exe/run/backint 5.1
    Input File:             /oracle/BWP/sapbackup/.bdxzgdlt.lst
    Profile:                /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
    Function:               BACKUP
    Backup Type:            BACKUP_FILE
    ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data1
    ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data2
    ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data3
    ERROR: unable to find file /oracle/BWP/sapdata2/BWM700.data1
    ERROR: unable to find file /oracle/BWP/sapdata4/BWM700.data2
    ERROR: unable to find file /oracle/BWP/sapdata1/BWMdim.data1
    ERROR: unable to find file /oracle/BWP/sapdata1/BWMfact.data1
    ERROR: unable to find file /oracle/BWP/sapdata2/BWMods.data1
    ERROR: unable to find file /oracle/BWP/sapdata1/temp_1/temp.data1
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
    BR0279E Return code from '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c': 2
    BR0232E 0 of 19 files saved by backup utility
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
    BR0231E Backup utility call failed
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.35
    BR0304I Starting and opening database instance BWP ...
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.42
    BR0305I Start and open of database instance BWP successful
    BR0056I End of database backup: bdxzgdlt.aff 2008-05-23 15.59.33
    Thank you
    Regards

  • I am trying to setup Microsoft office mail and need assistance  - I am receiving the error, unable to find server and DNS setting in the Network

    I am trying to setup Microsoft office mail and need assistance  - I am receiving the error, unable to find server and DNS setting in the Network

    Which version of OSX and what email provider are you using.

  • Error: "Unable to find a working IR device" in Windows Vista 64-bit, Audigy 4

    I have Audigy 4 Pro with the RM-500 remote that came with it.
    The remote is not working in Vista 64-bit (Enterprise).
    It is definitely not a hardware problem because everything works in Windows XP Professional SP3. When I dual boot into Vista, the remote doesn't control anything in Windows but the red light on the I/O external box is blinking so it's definitely receiving input.
    When I run "Entertainment Center Settings", I get the error "Unable to find a working IR device" and all the options are greyed out.
    <img title="err" width="300" style="width: 300px; height: 69px" src="http://img379.imageshack.us/img379/238/2278203yd.jpg" height="69" alt="err">
    <img width="459" title="err2" style="width: 459px; height: 393px" src="http://img379.imageshack.us/img379/388/2850392ep2.jpg" height="393" alt="err2">
    Has anyone gotten the remote working in Windows Vista 64-bit's? Thank you for your help.
    Regards,
    Lawrence

    _ I am having this exact same issue on vista business 32 bit. Everything else on the external box works perfectly fine, except the remote. The remote does work however with intelliremote, but I cannot justify paying the money for such simple functionality. Any fix on [email protected]

  • Exception in thread "main" java.lang.Error: Unable to find named traits: org.puremvc.as3.multicore.p

    Hi all,
    i try  to  use  pfi with a  project that i did with  air  in flash builder.
    I make my swf with ant  task
        <target name="releasecompile" depends="init">
        <echo>
                  Ant Task :: releaseCompile
        </echo>
            <java jar="${MXMLC.JAR}" fork="true" failonerror="true">
               <arg value="-debug=false"/>
                <arg value="+flexlib=${SDK_HOME}frameworks"/>
                <arg value="+configname=air"/>
                <arg value="-file-specs=${MAIN_SOURCE_FILE}"/>
                <arg value="-output=${build}/${APP_ROOT_FILE}"/>
            <arg value="-external-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5.swc" />
            </java>
        </target>
    i have a swf in result  and i play  pfi like this
    ./pfi -package -target ipa-ad-hoc -provisioning-profile /Users/stef/Desktop/PROJECT/PROJECT_Config-2.mobileprovision -storetype pkcs12 -keystore /Users/stef/Desktop/PROJECT/Certificats2.p12 -storepass mypass /Users/stef/Desktop/PROJECT/PROJECTConfig.ipa /Users/stef/Documents/Adobe\ Flash\ Builder\ 4/PROJECT/src/PROJECTConfigurateur-app.xml -C /Users/stef/Desktop/PROJECT/ PROJECTConfigurateur.swf  Default.png icons/Icon57.png icons/Icon29.png icons/Icon512.png
    Exception in thread "main" java.lang.Error: Unable to find named traits: org.puremvc.as3.multicore.patterns.facade::Facade
    at adobe.abc.Domain.resolveTypeName(Domain.java:195)
    at adobe.abc.Domain.resolveTypeName(Domain.java:112)
    at adobe.abc.GlobalOptimizer$InputAbc.resolveTypeName(GlobalOptimizer.java:274)
    at adobe.abc.GlobalOptimizer$InputAbc.readInstance(GlobalOptimizer.java:837)
    at adobe.abc.GlobalOptimizer$InputAbc.readAbc(GlobalOptimizer.java:388)
    at adobe.abc.GlobalOptimizer$InputAbc.readAbc(GlobalOptimizer.java:280)
    at adobe.abc.LLVMEmitter.generateBitcode(LLVMEmitter.java:160)
    at com.adobe.air.ipa.AOTCompiler.convertAbcToLlvmBitcode(AOTCompiler.java:329)
    at com.adobe.air.ipa.AOTCompiler.GenerateMacBinary(AOTCompiler.java:600)
    at com.adobe.air.ipa.IPAOutputStream.compileRootSwf(IPAOutputStream.java:196)
    at com.adobe.air.ipa.IPAOutputStream.finalizeSig(IPAOutputStream.java:366)
    at com.adobe.air.ADTPackager.createPackage(ADTPackager.java:65)
    at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:165)
    at com.adobe.air.ADTEntrypoint.parseArgsAndGo(ADTEntrypoint.java:132)
    at com.adobe.air.ipa.PFI.parseArgsAndGo(PFI.java:152)
    at com.adobe.air.ADTEntrypoint.run(ADTEntrypoint.java:68)
    at com.adobe.air.ipa.PFI.main(PFI.java:112)
    do you have some  ideas about this ?
    Regards
    Stef

    Ok,
        <target name="releasecompile" depends="init">
        <echo>
                  Ant Task :: releaseCompile
        </echo>
            <java jar="${MXMLC.JAR}" fork="true" failonerror="true">
               <arg value="-debug=false"/>
                <arg value="+flexlib=${SDK_HOME}frameworks"/>
                <arg value="+configname=air"/>
                <arg value="-file-specs=${MAIN_SOURCE_FILE}"/>
                <arg value="-output=${build}/${APP_ROOT_FILE}"/>
            <arg value="-external-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5. swc" />
            </java>
        </target>
    I mistake  this line
      <arg value="-external-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5. swc" />
    must be
    <arg value="-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5.swc" />
    for  include the content in the swf.
    Regards
    Stef

  • Export Release Build error - Exception in thread "main" java.lang.Error: Unable to find named traits

    I've been developing an AIR application for Android and iOS. During development, I've run the application (in debug mode) in the desktop simulator as well as on an iPhone 4 and a Nook Tablet.
    However, I recently tried to "Export Release Build" for iOS and hit the following error: (I've stripped out the package and class information in the error message below)
    !ENTRY com.adobe.flexbuilder.project 4 43 2012-04-06 13:09:15.516
    !MESSAGE Error occurred while packaging the application:
    Exception in thread "main" java.lang.Error: Unable to find named traits: valid.package.path.here::ValidClassName
              at adobe.abc.Domain.resolveTypeName(Domain.java:231)
              at adobe.abc.Domain.resolveTypeName(Domain.java:148)
              at adobe.abc.GlobalOptimizer.sccp_eval(GlobalOptimizer.java:6665)
              at adobe.abc.GlobalOptimizer.sccp_analyze(GlobalOptimizer.java:5909)
              at adobe.abc.GlobalOptimizer.sccp(GlobalOptimizer.java:4628)
              at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:3514)
              at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:2215)
              at adobe.abc.LLVMEmitter.optimizeABCs(LLVMEmitter.java:526)
              at adobe.abc.LLVMEmitter.generateBitcode(LLVMEmitter.java:336)
              at com.adobe.air.ipa.AOTCompiler.convertAbcToLlvmBitcodeImpl(AOTCompiler.java:472)
              at com.adobe.air.ipa.BitcodeGenerator.main(BitcodeGenerator.java:82)
    Compilation failed while executing : ADT
    !STACK 0
    java.lang.Exception
              at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:1019)
              at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
              at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:52)
              at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.doPackage (ExportReleaseVersionWizard.java:283)
              at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.performFi nish(ExportReleaseVersionWizard.java:152)
              at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:827)
              at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:432)
              at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624)
              at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:240)
              at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
              at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
              at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
              at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
              at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
              at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
              at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
              at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
              at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
              at org.eclipse.jface.window.Window.open(Window.java:801)
              at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction$1.run(Export ReleaseVersionAction.java:97)
              at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction.run(ExportRe leaseVersionAction.java:103)
              at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
              at org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:229)
              at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionI tem.java:584)
              at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
              at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java :411)
              at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
              at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
              at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
              at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
              at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
              at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
              at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
              at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
              at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2696)
              at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2660)
              at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2494)
              at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:674)
              at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
              at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:667)
              at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
              at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
              at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
              at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
              at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
              at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)
              at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
              at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
              at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
              at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
              at java.lang.reflect.Method.invoke(Method.java:597)
              at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)
              at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)
              at org.eclipse.equinox.launcher.Main.run(Main.java:1410)
    The class the error message is referring to is defined with a SWC that my project links to. However, I've even tried to define a class with that same name (and location) within my project and it still fails to find it.
    Why am I able to Project->Clean and run this project within the desktop AIR player (or on the device in debug mode) but unable to export it as a release build?
    I have found a couple of threads mentioning a similar error but none of them have been marked as resolved.

    At this point I feel I am talking to myself, but I will share my work-around in case it helps another who may stumble across this post.
    In my particular case, both my main AIR application and my ANE wrapper library were referencing the same external Flex library (same revision). Both projects had the library linkage set to merge. Changing the linkage to "External" on one of the 2 libraries (it doesn't seem to matter which) and leaving the other as "Merged into code" enabled the export to complete without the bizarre "Unable to find named traits" error.

  • Error: Unable to find channel ID

    Hello,
    I have an scenario R/3 - XI - Mail in GEN, the same scenario was working perfectly in GED but after transporting it to GEN it does not work.
    In the adapter monitoring I can see the following error: 'Unable to find channel ID'. Does anybody know the reason of this error?
    Thanks in advanced,
    Luis.

    hi,
    - check if all directory objects are tranported to new landscape!
    - activate communication channel once more
    - refresh CPA cache
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • [SOLVED] - Arch Boot Error: Unable to find Root Device /dev/sdb1

    I had Arch running perfectly using /dev/sdb1 (versus Disk Label or UUID) and decided to do a update.  After the Update I can't boot
    to a running system, and I get this error message:
    ERROR: Unable to find root device /dev/sdb1 
    You are being dropped into a recovery shell.
    Is there an easy way to convert to UUID or Disk Label since the latest Upgrade doesn't allow me to continue to use /dev/sdb1 ??
    I'd prefer not to have to rebuild both USB Flash Drives to get functional systems.
    Any Help is greatly appreciated.
    Suggestions?
    Larry
    Last edited by lkraemer (2012-02-21 15:14:02)

    Check your grub and read https://wiki.archlinux.org/index.php/UUID#By-uuid
    Edit:
    https://bbs.archlinux.org/viewtopic.php … 0#p1059160
    https://bbs.archlinux.org/viewtopic.php?pid=1059338
    https://bbs.archlinux.org/viewtopic.php?id=135288
    Last edited by karol (2012-02-21 01:07:21)

  • Nokia lumia 520 error unable to find a bootable option

    pls help as lost all my apps and contacts it turned on fine then last week I should add so lol I installed a update however yesterday it wouldn't let me access any messages or calls just kept turning to home screen arrrrgghh xmas day lol then it just turned
    off and displayed this message at top off the screen{ERROR Unable to find a bootable option. Press A\any key to shut down all my contacts banking pdfs and photos were on this phone can a\ny one help me by telling me what to do................

    Unfortunately the phone is DOA.  The memory chip that stores the boot information and OS went bad.  I'd suggest you contact Nokia support over VZW to get a replacement. Phone us - Nokia - USA

  • Debugging in JDev91, "Error: Unable to find fdebug.exe"

    Hi,
    I'm using JDev9i in Windows2000. When I try to debug my software JDev9i says; "Error: Unable to find fdebug.exe".
    I have checked all security settings of my folders, (as someone proposed here to some one else, who had problem which was also linked somehow to fdebug.exe -file), but security settings were ok.
    Can someone help me somehow ?
    .JKa.

    have you checked that fdebug.exe is on your system?
    It should be in <jdevroot>\jdk\jre\bin

  • Digital Signature- SSF error: Unable to find external security product

    Dear Friends,
    After I enter my User ID and Password, this displays this error !!!
    SSF error: Unable to find external security product
    Would really appreciate your help.
    Thanks,
    Sri

    Hi Sri,
    Would you pls check the installation of the security toolkit on your application server?
    Which security product do you use?
    The standard security product is SAPSECULIB (library sapsecu.dll).
    Please check the SSF initialization messages which are contained in each dev_w## developer trace (transaction ST11). When successful, the initializaion messages look like this:
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is /usr/sap/<SID>/SYS/exe/run/sapsecu.dll .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N  ===...sucessfully completed.
    N  =================================================
    General information for SAPSECULIB can be found in SAP note 354819.
    Best regards,
    Christoph
    P.S.: Please reward points for useful information.

  • Nokia Lumia 620 "Error: Unable to find bootable op...

    Hello
    I'm in need of some help with my Nokia Lumia 620. It is 21 months old.  It was running on Lumia Denim (WindowsPhone8 (8.10.14219) according to the Hardware/Software Info on my account on windowsphone.com)
    Today the screen suddenly went black when I tried to open the email app and started to display the message "Error:  Unable to find bootable option. Press any key to shutdown"
    I have tried removing the battery and replacing it after ten mins.  I still get the error.
    I have tried removing the battery and sim card and replacing the battery after ten mins.  Still no joy.
    I have tried to perform a HARD reset. This doesn't work as as soon as the power button vibrates and I press the volume down button the phone shuts down, the exclamation mark never appears.
    Please could you point me in the right direction for solving this and getting my phone up and running

    Hi, deffers90. Welcome to Microsoft Mobile Community. Since all the possible troubleshooting steps didn't help, consider sending the phone to our Care Points for assessment as suggested by @93tid. Everything will be deleted once the phone undergoes repair. To look for the nearest Care Points within your area, see: Local support. Keep us posted.

  • JVM Loader Error: Unable to find supported JDK or JRE version

    Hello,
    I am trying to use Visibroker (Borland version 6.5) with JDK 1.5.2
    When I try to run idl2java, it gives me the following message:
    JVM Loader Error:
    Unable to find a supported JDK or JRE version. The JVM Version should be either 1.3.1 or 1.4.1 and above.
    Check your installation and use -VBJjavavm or -javahome(vbj only) to specify the JDK or JRE location
    I am using eclipse IDE - i created an external tool configuration for idl2java giving the argument *.idl
    I looked in the forum and tried the suggestions given in this thread
    http://forum.java.sun.com/thread.jspa?threadID=376403&messageID=3052413
    Where am I going wrong. Can someone help me?
    Thaks
    Manju

    Hi,
    I don't know if you got an answer to this problem. It looks like you need to install Borland Service Pack 1 (for BES 6.5) to fix this issue. I spent a couple of days squirming, trying to figure out this issue.
    Hope this helps.
    Regards,
    Sony.

  • Nokia 822 ERROR: Unable to find bootable option.

    My 822 now says, "ERROR: Unable to find bootable option. Press any key to shut down."
    This occurred earlier today immediately upon installing a Verizon update. The phone worked perfectly before the update.
    What is going on? I certainly am not going to accept responsibility for this failure, or replacing this phone.
    Before you ask, the phone is in perfect condition otherwise. Never dropped. Never seen even a drop of water (or any other liquid).
    One thing peculiar I did notice was that the update took over an hour to download, which seems like quite a long time considering data transfer rates.
    So, what can be done?
    To recap:
    1) My phone worked perfectly. It was in perfect condition.
    2) An update was installed (which Verizon recommended (and I'd go as far as to say forced))
    3) Now the phone is completely inoperable, only giving the error message listed above.
    Help please?

    Hi Joel, the sim card has been removed and reinstalled multiple times with no effect. And yes, only the the original Verizon software was on the device. To be clear, the phone was attempting to install a Verizon-forced update when it died. I would rather have not had the update because the phone was working perfectly, but Verizon does not give the option to decline updates, only delay them. It should be noted that with the help of Verizon associate (Lovesa) the Nokia Software Recovery Tool was attempted, but even that did nothing. 
    I have now done at least 8 hours of research on this and it is obvious this is a widespread and known issue with the 822. There appears to be absolutely nothing that can be done to revive the phone at this point. After viewing literally hundreds of posts on the "unable to find bootable option" error no one has found a fix. This issue is well documented. 
    Why Verizon would force an update that ruins users phones is beyond me. And to take no responsibility is, in my view (and most likely the law's view), criminal. To be completely honest and forthright, I am so upset about this situation Verizon is now losing a 15 year loyal customer. 

  • [SOLVED] ERROR: Unable to find root device '/dev/sda3'

    Earlier I updated the kernel to my arch system and found this error while trying to boot. I hate to post this because there are so many topics like it, but I've been looking for hours for a solution to this problem and can't find one.
    Here is the output:
    Booting 'Arch Linux'
    root (hd0,1)
    Filesystem type is ext2fs, partition type 0x83
    kernet /vmlinuz-linux root=/dev/sda3 ro
    [Linux-bzImage, setup=0x4200, size=0x2ff2d0]
    initrd /initrd @ 0xfd17000, 0x2c878c bytes]
    Probing EDD (edd=off to disable)... ok
    Decompressing Linux... Parsing ELF... done.
    Booting the kernel.
    :: Starting udevd...
    done.
    Waiting 10 seconds for device /dev/sda3 ...
    ERROR: device '/dev/sda3' not found. skipping fsck.
    ERROR: Unable to find root device '/dev/sda3'.
    You are being dropped to a recovery shell
    type 'exit' to try and continue booting
    sh: can't access tty; job control turned off
    My partition layout is like this:
    swap: /dev/sda1
    boot: /dev/sda2
    root: /dev/sda3
    extended: /dev/sda4
    home: /dev/sda5
    I have two hard drives, but i'm sure /dev/sda is the one with my OS.
    Here are some things I've tried:
    This was at the very bottom of the pacman wiki
    # mkdir /mnt/arch
    # mount /dev/sdaX /mnt/arch (your root partition)
    # cd /mnt/arch
    # mount -t proc proc proc/
    # mount -t sysfs sys sys/
    # mount -o bind /dev dev/
    # mount /dev/sdaX boot/ (your /boot partition) #This step is not needed if you do not have a separate boot partition
    # chroot .
    # pacman -Syu udev mkinitcpio
    # mkinitcpio -p linux
    I've also tried performing the above, downgrading the kernel, updating my mirrorlist, reinstalling the kernel, and rebooting as mentioned here.
    I've alsa tried a few other things that I've read, but can no longer remember.
    Any help would be greatly appreciated! Thanks.
    Last edited by colton7909 (2012-05-25 02:09:36)

    Thank colton
    Same problem here, but on a mac book (not mine eyh )
    So, for those how have the problem (or need a live usb for mac or uefi systems),
    1) with a 32bits system
    - download gparted live cd
    - use it for the step 3
    2) with a 64bits system:
    - you need the gparted live cd too: mount it and copy the EFI directory somewhere; then umount it;
    - download a 64bits system (system rescue cd, as colton said is enough, follow the instructions for installation on their website first);
    - mount you live usb, install the 64bits system;
    - copy EFI system on the key
    - edit the grub.cfg in EFI/boot/ , add the following before the other entries:
    menuentry "System Rescue" {
    set gfxpayload=keep
    linux /syslinux/altker64 nomodeset efi
    initrd /syslinux/initram.igz
    3) repairing...
    - boot the broken computer with the live usb
    - mount the partition on which your system is (e.g. /dev/sda1 on /mnt)
    - chroot it, init the system as needed (mount /dev, /proc, etc. the easier way is using init scripts)
    % chroot /mnt /bin/bash
    % /etc/rc.sysinit
    % mkinitcpio -p linux

Maybe you are looking for

  • How do I sync Notes between my iPad and iPhone?

    My Notes on my ipad are not syncing with the notes on my iPhone. Aren't they supposed to sync?

  • Abap code in HTML Tag in Web Interface

    Hello, in a text tag im my web interface for a BPS a added the sap example code "How to Integrate BEx Web Applications into BPS Web Interfaces". Now I want to open a web template with a query containing the user and the date as filter object. this fi

  • Value mismatch in the Invoice

    Hi Experts , I have condition type in sales order ZS07 , the value is computed for this in a requirement routine. But the same does not flow into the invoice. Do we have make any config settings . The order and invoice have different value for the sa

  • 10.4.11 Kernel Panics & Auto-Rebooting

    I'm having problems with my servers (a G5 Xserve running 10.4.11 OSX Server & a Power Mac G5 running 10.4.11 OSX Server) and I can't seem to pinpoint the causes. The only reason the Power Mac G5 is running server is in case the Xserve poops out on me

  • Ipod touch not reading .mp4's

    Whenever i try to get a video in my ipod touch 2nd gen 4.2.1 i get the message it cant be read on the ipod. if i try to get video in itunes i drag it into videos tab and nothning happens. if i try ctrl-o to add something to library nothing happens. i