3gs - Buggy Pinch Gesture (when connected to itunes)
Hello,
I think I have found a bug on iPhone OS 3.1.2.
When iPhone is connected to iTunes, the pinch gesture doesn't work correctly (only horizontal pinch works, vertical pinch causes wierd zoom/scrolling behaviour
When iPhone is working on battery or is simply charging from the wall plug there's no problems.
I tried restoring the device but that didn't solve the problem
Anyone else with iphone os 3.1.2 can try this and tell me if it happens?
thanks
My phone zooms normally whether pinching vertically or horizontally (with the phone in vertical or horizontal position) when connected to iTunes. I have to say I never tried this before - the only functions I can see for using the phone connected to iTunes is for syncing/backing up, updating or restoring.
If this is still happening after restoring using a backup, there are corrupted settings in your phone, try the following steps as needed:
Settings > General > Reset > Reset All Settings
Restore in iTunes as a new iPhone
Message was edited by: modular747
Similar Messages
-
My iphone 3gs keeps telling me to connect to itunes
my iphone 3gs keeps telling me to connect to itunes, when i do it tells me that it needs to be restored, but it doesnt restore, instead it says error 1013
Try http://support.apple.com/kb/HT1808.
-
Since software update, can't see contents of iPod when connected to iTunes
About 2 days ago, when I connected my iPod to my pc (iTunes), it said there were some software updates for my iPod so I downloaded them and the iPod rebooted itself. Once it came back up, my iPod showed up in iTunes under "devices" on the left hand sidebar. I got the registration page - I usually click register later, but nothing happened this time. It didn't bring me into my iPod. So I tried to Register. I could get so far, then it asked if I wanted some free movie or something, I said NO THANKS, CONTINUE, but nothing happened. I wasn't registered AND I couldn't access my iPod. I can see my iPod under My Computer. I can see "sandra's iPod" uder devices in iTunes. BUT, I can't get to the content when connected to iTunes. All of my stuff is there on the iPod. I can play my iPod when it's not connected to iTunes - but I can't see the content, manipulate playlists, delete songs, etc. when connected to iTunes. I am almost positive this is a result of the latest software updates to the iPod. I have not updated iTunes - I didn't want to and compound the problem. I'm not a techy person - so please be gentle! Thank you. Sandra
Resolved at home.
-
My iPhone 4s does not appear on devices when connected to iTunes in my Mac
My iPhone 4s does not appear on devices when connected to iTunes in my Mac
Check to make sure you have enough free space to include the videos.
-
i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards
Itunes 11.1 is for your computer, not your iphone
It is required in order to sync with ios 7. -
trying to activate my iphone 5. when connected to itunes its says i need version 10.7. but when i try to update, it says that im current at 10.6.3.
iTunes version 10.7 requires at least Mac OS X version 10.6.8 if you're running a Mac, or Windows XP Service Pack 2 or later if you're running Windows.
Is your computer up-to-date enough for iTunes 10.7? -
i have an ipod touch 5th gen and when connected to itunes i get a message saying itunes was unable to load data class information from sync services. reconnect or try again later. anyone got any ideas? i've tried most things on most forums but still no joy
Try here:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
If not successful see the previous discussion on the right side of this page with the green checkmark. -
so i got ios 7 in beta on my ipod touch, now several months later, it says my ipod touch needs to be activated. it wont activate over wifi or when connected to itunes. how can i fix this?
You say you have iOS 7 beta. If you are a developer you have access to the private OS 7 developer's forum
iOS 7 Developer forum- Apple Developer
Otherwise you are on your own since you have a bootleg copy
PSA: iOS 7 If you're not a developer, don't install developer betas on your iPhone | TUAW - The Unofficial Apple Weblog -
My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"...I literally bought some of these songs yesterday on my iPhone and now I can't sync them to my iPad. What is this issue? Usually I would just have to plug either device into iTunes and everything would sync, now nothing new syncs.
On your iPad tap Settings > Store
Switch Books off then back on then reset your iPad.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears. -
Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?
Not the iPad - your computer must be running iTunes 10.7 in order to sync. It has nothing to do with iTunes on the iPad.
You can download iTunes for your computer here.
http://www.apple.com/itunes/ -
IPod Classic's screen when connecting to ITunes
With my IPod Classic 80GB with displying time on the menu, when connecting(Syncing) to ITunes, where time was displyed on the top grey line like 8:20PM for example, it turns into a meaningless letter 'P'.
If the time is like 8:20AM, no such letter will appear on this grey line.
Is this for everyone's ipod classics? Or only mines stuffed.
No fault on its functions, but curious if this is just a stuff up by Apple.
Your yes/no is much appreciated.
Thanks.
Message was edited by: Jase221I'm seeing the same here, too. Letter "P" on top of the screen when connected to iTunes.
I will see if turning off the clock in the display or switching to 24hour time works. Hadn't noticed if connected in the AM makes a difference since I usually synch up at night in the PM.
The iPod seems to operate just fine otherwise.
Message was edited by: carlosdls -
My iPhone 4 will not power on. When connected to iTunes via my computer, it is recognized and shows fully charged battery. Pressing and holding the sleep/wake button does nothing; just a black screen. Any suggestions?
Only way is to bring it to the Apple Store and use the warranty if it hasn't expired
-
My iPad shows message needs to be backed up. When connected to iTunes it shows all backed up. Cannot get rid of message by clicking ok. IPad therefore is frozen. What to do?
Welcome to the Apple Community.
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it. -
Hi
I am trying to update my ipad from ios 4.3 but when connected to itunes I get an error message saying that the internet is not accessible when it is. How do I resolve this?Disable your firewall and antivirus software, restart your iPad, quit iTunes, restart your computer and then try to update again.
-
my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.
I am in the noerthern [parts of australia and accessing an apple store is not possiable for another month. this is my only soucrce or telecommunication. please helpThis is what it says about error 2006
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
Maybe you are looking for
-
Running Itunes from external hard drive
I have transferred my itunes to an external hard drive. I have changed the save to loaction in the preferences, advanced window. When I connect my IPod to the computer, it tells me that it is synced to another and asks if I want to erase and resync.
-
Maximum video resolution and/or bitrate/fps
could anyone tell me the maximum video resolution, fps, and bitrate suported by the video player on asha 210 and asha 310?
-
Im using iphone5 but can't open the power what can i do?
i'm using iphone5 but i can't open the power what can i do i charge almost one hour stell can't open the power
-
Just pulled the Adobe Cloud trigger and regret already. Just purchased the Adobe Cloud subscription and downloaded the Muse update. Can't even open the program! It crashes every time I try to open it! All references to this on Abobe Support have been
-
Wpg_docload.download_file opens in a new window in PL/SQL Oracle code
I am trying to download the attachment from web browser using wpg_docload.download_file command from the PL/SQL procedure. I like to open the document in the same browser window instead of opening new window (Excel spreadsheet opens in Excel) or when