3L Client running under 3M client runtime.

I have noted that a 3L client (non-compiled) running on a Win 95, Win 98 or
NT box with a 3M client runtime has some problems with listviews. Field
widths all seem to get messed up (generally shorter by about 20-40%).
Has anyone noticed this ? or is it an oddity in the way we have used
listviews.
Regards,
Chris Will, Sydney, Australia

Try a google search for *managed client site:apple.com* and peruse the hits.

Similar Messages

Managed Client running under root

Hi
Can any one of you here tell me what is Managed Client???
I saw that one in the Activity Monitor and it is running under root account.
Is this one of the Apple Remote Desktop?
Or other Application is running.

Try a google search for *managed client site:apple.com* and peruse the hits.

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
Thanks and Regards, Rangnath Mali

Hi Rangnath,
For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Error (access denied) when starting Client Runtime Audit Browser

LS,
After starting the OC4J instance, I try to start the Client Runtime Audit Browser. For a brief moment I see a DOS-box, then an IE-page appears saying the following:
======================================================
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: http://127.0.0.1:8999/owbb/RABLogin.uix
The following error was encountered:
Access Denied.
Access control configuration prevents your request from being allowed at this time. Please contact your service provider if you feel this is incorrect.
======================================================
Any idea whether this is a local problem?
I've tried applying the settings as mentioned in the configuration guide, but the Bypass option for the proxy is impossible to set since we do not use a proxy server.
Your thoughts?
Regards, Patrick

Good morning All,
Maybe I've got the wrong idea of what is all needed to be able to run the RAB locally, but I thought that starting the OC4J instance would be sufficient to get started.
In the Installation and Configuration Guide the following is mentioned:
2.7 Step 6. Configure the Web Browser for Design and Runtime Audit Browsers
2.7.1 Add "LOCALHOST" to Your Web Browser Proxy Server Bypass List
2.7.2 Configure the Cache Management in Your Web Browser
2.7.3 Configure Warehouse Builder with a Net Service Name
As said before:
@2.7.1, we do not use a proxy (according to Internet Explorer settings) therefore I can't add 'localhost' to the bypass-list, but then again I think that it does not need to be, since there is nothing to be bypassed in the first place.
2.7.2 has been implemented.
@2.7.3, I added the net service name manually to TNSNAMES.ORA (since I also needed that to be able to get on to the database using TOAD and SQL*Plus).
We do not have 9iAS integration for RAB, nor do we have OEM integration.
Are there other things that need to be implemented? Mentioned so far have been HTTP-server and RTP services, but paragraph 2.7 does not mention anything about this. Maybe there are certain services that need to be running on the server (like HTTP and/or RTP), even though I would like to run the RAB locally?
Where does one actually need RTP for?
Thanks in advance.
Cheers, Patrick

I can't find a download of the 10.2.0.4 Orcale client runtime version.

Hello.
I can't find a download of the 10.2.0.4 Orcale client runtime version. I am able to find the instant client but this isn't working for me. Can someone help me find the download location for the runtime version. I am trying to load the client on Windows 7 32bit version.
Thanks

799974 wrote:
Hello.
I can't find a download of the 10.2.0.4 Orcale client runtime version. I am able to find the instant client but this isn't working for me. Can someone help me find the download location for the runtime version. I am trying to load the client on Windows 7 32bit version.
ThanksYou won't be able to get 10.2.0.4 anything without a paid support contract, as 10.2.0.4 is an upgrade patch from the the base 10.2.1.0.
Plus, it is not certified/supported on Windows 7.
Plus, if your Windows 7 is any "home" edition, no oracle product is certified on it.
Why do you need this specific version of the client?

What is client runtime option installation?

Hi,
I have a bug here which says, they have installed the DB with client runtime option.
So, now they have $OH/inventory but not $OH/oui.
Anyone out there can throw some light on what exactly is this option?

Versions. Please give us some versions.
Database, Operating system, anything. Just give us some versions. Please.

Loss of keyboard focus in Java appl running under linux

I have a small sample program that replicates my problem. When this program is run a window is created. If you select File->New another instance of the program window is created. Now if you try to go back and bring to front the first window, keyboard focus is not
transferred when run under linux. You can only type in the second window. The expected behavior does happen in Windows.
> uname -a
Linux watson 2.6.20-1.2933.fc6 #1 SMP Mon Mar 19 11:38:26 EDT 2007 i686 i686 i386 GNU/Linux
java -versionjava version "1.5.0_11"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_11-b03)
Java HotSpot(TM) Client VM (build 1.5.0_11-b03, mixed mode, sharing)
javac -versionjavac 1.5.0_11
import java.awt.event.*;
import javax.swing.*;
class SwingWindow extends JFrame {
    SwingWindow() {
     super("SwingWindow");
     JMenuBar menuBar = new JMenuBar();
        JMenu fileMenu = new JMenu("File");
        JMenuItem newItem = new JMenuItem("New");
        newItem.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent event) {
          SwingWindow.createAndShowGUI();
     fileMenu.add(newItem);
        menuBar.add(fileMenu);
        setJMenuBar(menuBar);
        setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
     JTextField text = new JTextField(200);
     getContentPane().add(text);
     pack();
     setSize(700, 275);
    public static void createAndShowGUI() {
        JFrame frame = new SwingWindow();
        frame.setVisible(true);
    public static void main(String[] args) {
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
}

You can implement the FocusListener interface. When
the first JFrame gains focus, call
text.requestFocusInWindow(). I hope this helps.The call requestFocusInWindow is not helping, perhaps even making it worse.
The problem seems to be that I am in the situation where the call
KeyboardFocusManager.getCurrentKeyboardFocusManager().getPermanentFocusOwner()
is returning the expected Component. The problem is that the KeyListener class that is registered with the Component is not being called when a key is being pressed.
The issue is that I have a component that has the keyboard focus, but the KeyListener class
is not responding.
This seems to be a linux only problem which makes it only mysterious.

Problem of executing a process under Linux using Runtime.exec

Hi, All
I am having a problem of executing a process under Linux and looking for help.
I have a simple C program, which just opens a listening port, accept connection request and receive data. What I did is:
1. I create a script to start this C program
2. I write a simple java application using Runtime.exec to execute this script
I can see this C program is started, and it is doing what it supposed to do, opening a listening port, accepting connection request from client and receiving data from client. But if I stop the Java application, then this C program will die when any incoming data or connection request happens. There is nothing wrong with the C program and the script, because if I manually execute this script, everying works fine.
I am using jre1.4.2_07 and running under Linux fedora 3.0.
Then I tried similar thing under Windows XP with service pack2, evrything works OK, the C program doesn't die at all.

Mind reading is not an exact science but I bet that you are not processing either the process stdout or the stderr stream properly. Have you read http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html ?

The MessagePerformanceUtils:totalTime issue in Flex 4 (rpc.swc) using LCDS 3.1 running under JDK1.6

We are facing an issue while using LCDS 3.1 running under JDK1.6 in Sun Solaris v5.10 OS & Adobe Flex 4.
Scenario :-
===================================
As part of our Flex-based client-server application (with Java backend) we have a performance report generation module. Following flex framework class is used to calculate the performance of various layer of a typical server-based request-response cycle.
; (available in rpc.swc library file)
(for example : server time, cairngorm time, UI screen rendering time, UI event generation time etc).
The totalTime was working properly before upgrading the rpc.swc to Flex 4 ; However it broke after migrating to Flex SDK 4; The totalTime is now coming as negative junk value.
As we understand that the above Flex framework class method works in conjunction with LCDS running at server side on JDK.
We suspect that the new rpc.swc taken from Flex SDK 4 is causing the issue !
System information :
Web Server : Weblogic 11G
Operating System : Sun Solaris v5.10 OS running on Sparc hardware.
Flex : Adobe Flex sdk 4.0
Flash player : Adobe Flash Player 10
Browser : Internet Explorer 8
LCDS : 3.1
JDK : JDK 1.6.0_14
===================================
Has anyone faced similar problem before ? Any help or direction would be highly appreciated.
Thanks in advance,
Rabi
mx.messaging.messages.MessagePerformanceUtils :totalTime

Nothing has changed in the Flex SDK sources for this class since sometime around 2008. Are you running against the same LCDS server as you were before you updated to Flex 4? This certainly seems strange (and bad). Do you see the same behavior with Flex 4.5? What was the version of Flex you were using before switching to Flex 4.0?
If you can provide the additional information, we will look in to this. A reproducable case that was a simple mxml application along with a simple destination config would help us narrow the problem.
Sorry for the problems!
Tom

SSIS 2012 package runs under SSDT but fails with permission error from SSMS

I have a simple package that pulls data from a text file located on a Windows file server that runs successfully from SSDT on my client.
However, when deployed and running the package via SSMS from the client, the package fails with a permission error, with the error stating that the data file could not be opened.
I have done some investigation and have seen some info that states that a package run from SSMS runs under the account on which you are logged on to the machine, which I would have thought is correct. This is therefore the same account when running from
SSDT (which works) and I can see from the SSIS Report that the 'Caller' is stated as my account, so if this is the case why isin't the package working.
I've also seen an MSDN forum answer which stated the opposite that the package when run from the IS Catalog in SSMS doesn't run under the account on which the client is logged on with, which is the opposite of the above, but doesn't indicate which account
it is using.
So what account is being used to run SSIS 2012 packages from the IS catalog from within SSMS ?
If it is the account on which you are logged onto the client running SSMS, why is it not working when the account has the necessary permissions (as provent when running from SSDT) ?

I am aware it's using my account and not one of the service. There's nothing in the posts above which suggests I'm using the service account. I don't know why people keep assuming that I'm running the package from a job. I've never stated that in any of
the posts I'm running the package from a job. It's been made quite clear I'm running the package from the IS Catalog on SSMS:
"This is simply selecting a package from the IS Catalog, right-clicking and selecting Execute package.", as per the Nov 18 post, and in the original post "....So what account is being used to run SSIS 2012 packages from the IS catalog from
within SSMS".
Just to be clear, the package is NOT being run from a job. It's using the Execute package option when selecting the package within SSMS from the IS Catalog and it's running under the account on which I am logged on to my client.
Please read carefully. I was just answering your question "So what account is being used to run SSIS 2012 packages from the IS catalog from within SSMS ?" and stating that you where right and that it uses your account to run the package
when you execute a package manually from the Catalog and that you can prove that by logging the system variable.
A good suggestion about using a share in the task to map the drive and I will try this. I would find it strange that SSMS requires this mapping whereas SSDT does not though.
Ok let us know your findings. If it doesn't work you can also test it with a password and username:
net use f: \\financial\public yourpassword /user:username
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

I have Firefox 6.0 running under Windows XL. When I forward an email with a URL in it, my recipients tell me the URL is not highlighted and they have to cut and paste it into their browser. Why? How can I get my forwarded URLs to be highlighted?

I have Firefox 6.0 running under Windows XL. When I forward an email with a URL in it, my recipients tell me the URL is not highlighted and they have to cut and paste it into their browser. Why? How can I get my forwarded URLs to be highlighted?

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Getting processes running under NT

Dear all,
Is it possible for my Java application to check whether some process is running under NT 4.0? For example, can I check whether Word 2000 is currently running on a machine? You can see winword.exe being active in the task manager, how can I catch this from my Java application?
Thanks in advance,
Sebastiaan

Look into NT Resource Kit. You can access commands like 'ps -ef' (it'll give you the list of running processes - just like Unix).
using Runtime.getRuntime().execute("ps -ef | grep [your_process_name]");
The trick part would be to capture the output. Right from the top of my head: do Runtime.getRuntime().execute("ps -ef >> output.txt");
It'll create output.txt with some output in it. Reading in the file, you'll find out if your process is running.
The NT Resource Kit is a standard utility any nt sysadmin should have.
Good luck
AN
www.bizdisplay.com

Running the 6.1 Runtime Engine with 2009 Installed

I have 2009 Developer's Suite LabVIEW installed and am using it regularly. I recently obtained some executables which only run under the 6.1 Runtime Engine. I have downloaded the 6.1 RTE, but have not installed it. Do you think that installation of the 6.1 RTE will have any adverse effects on my 2009 installation? I do not want to install LabVIEW 6.1, just the RTE.
Solved!
Go to Solution.

As long as the program doesn't need other "drivers" such as earlier DAQ it should be ok, although usually it is a very good idea to install in the "original order" i.e., 6.x then 2009. I have RTE for several versions installed at the moment, but they were incrementally installed over the last couple of years.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

SSO to partner application running under IIS

Hi,
We have a complete set-up for 9iAS Release2 where some applications are running. In parallell we have an application running under IIS, and would now like to enable the IIS application as a partner application to 9iAS letting the 9iAS SSO server handle the authentication.
In the documentation of Oracle Proxy Plug-in I read that this proxy plug-in can be used to proxy requests from IIS to Oracle http server (OHS) and also in this way enable SSO.
My question is if this can be done only for applications running under 9iAS but having IIS as web server, or if it is also possible like in our case to enable SSO via the proxy plug-in to applications runnind under IIS?
If this is not supported is the only available solution to use the SSO SDK in my IIS application?
Thanks and regards,
Rikard

Here's a DIY answer.
See Metalink Note 269820.1 which shows you how to use Perl to overwrite the host name in the HTTP header and remove the port number.

How to allow access to web service running under ApplicationPoolIdentity

Hi All,
I have a WCF web service hosted in IIS 7 (or maybe 7.5, whichever comes with Windows server 2008 R2) using DefaultAppPool running under ApplicationPoolIdentity per Microsoft's recommendation. The web service needs to call a stored procedure to insert data
to a db. The web server is on a different VM than the database server. The db server is running SQL 2008 R2. Both VMs run Windows server 2008 R2.
When the web service tries to connect to db, it encounters this exception:
Exception in InsertToDb()System.Data.SqlClient.SqlException (0x80131904): Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
Here's the connection string in web.config:
Application Name=somewebservice;Server=somewebserver;Integrated Security=SSPI;Database=somedatabase;Connection Timeout=60"
How should I configure SQL security to make this work?
Thanks in advanced.

Thanks for the link Dan. Maybe I'm the one who cause the confusion :)
If I understand you(and Erland) correctly, you suggest using a custom, domain account for application pool identity. However, if we do that, our IT will need to maintain those accounts, and they don't want that. So I'm choosing a built-in account called
ApplicationPoolIdentity as the application pool identity, but it's not working. Network Service, on the other hand, works, but my boss wants us to follow MS's best practice.
What's puzzling is that according to this: http://learn.iis.net/page.aspx/624/application-pool-identities/, both Network Service and ApplicationPoolIdentity uses machine account to access network resource (like db in this case), but in my case, Network Service
works, but not ApplicationPoolIdentity.
Hallo Stephen,
with respect - it seems to me that only idiots are working at your IT ;)... It is absolutely useful to work with "service accounts" created within the domain. That's the only way to manage and control accounts!
If you want to "pass through" the identity of the web user (SSO) you have to check whether the app pool is set to "allow impersonate". As far as I understand the ApplicationPoolIdentity-function the app pool will create a unique user named as the service.
I assume that will not work with the connection to the sql server because this user is unknown.
Local Service will not work because it's restriction is located to the local machine.
Network Service will work because access to network resources will be available.
So my recommendation is to use a dedicated service account or impersonation:
http://msdn.microsoft.com/en-us/library/xh507fc5.aspx
Uwe Ricken
MCITP Database Administrator 2005
MCITP Database Administrator 2008
MCITS Microsoft SQL Server 2008, Database Development
db Berater GmbH
http://www-db-berater.de

3L Client running under 3M client runtime.

Similar Messages

Maybe you are looking for