4 beeps 5 times in a row

Can someone tell me what 4 beeps 5 time in a row means. Wich part of my computer is saying that is not working. I have a HP core 2 duo and its making 4 beeps 5 times in a row when I try to turn it on . Beep 4x rest beep 4x rest beep 4x rest beep 4x rest beep 4x . Please help thanks

Do you have the side vibrate/ring switch fully engaged in one direction or the other? If so, then it very well could be a hardware issue with the switch. Visit to an Apple store genius bar would not be a bad idea to have it checked by the techs.

Similar Messages

Message alert and other alerts beep more than 3 times in a row. how to fix it.

message alert and other alerts beep more than 3 times in a row. how to fix it.

If they are happening at 2 minute intervals check the Settings>Notifications>Messages>Repeat Alert setting.

Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row! What should I do?

Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row!
What should I do?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

My Appstore account says that my security number don´t match but my credit card got charged 3 times in a row, how can I fix this, and how can I get my money back or the apps downloaded?

Hello, I was trying to purchase Whats app, when I try to enter my credit card info, it keep telling that my security number don´t match, but my credit card got charged, 3 time in a row. I can send a screen capture of the message telling that already charged my card.
How can I fix this problem? I mean how can I download the app or get the credit in the store or get my money back?
Thanks in advance

Hi Marvin,
Thanks for visiting Apple Support Communities.
Did you receive an email confirmation of your purchase? If so, you can use the steps in this article to report an issue with your order:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
Best Regards,
Jeremy

I've gotten a kernel panic 4 times in a row while trying to reinstall lion osx from a flash drive to a reformatted hard drive. How is this possible when there's "nothing" on my computer?

My SSD failed and I was instructed to reformat my hard drive and restore my files. I erase my hard drive using Disk Utility and reinstalled Lion from a flash drive. While Lion is installing, I get a kernel panic. That's happened now four times in a row and I'm befuddled because I don't have anything on my computer to conflict right? Please help.

eubiedoo wrote:
Do you think it's ram related?
No way to tell unless you test it. Like I said kernel panics are usually hardware related. Since your Macbook Pro is from the "2009" era, run the Hardware Test disc which you should already have - Intel-based Macs: Using Apple Hardware Test
Apple Store diagnostic testings are FREE. It's the repairs you are responsible for if out of warranty.

Windows update borking brand new server 3 times in a row...

Hello all,
here's an interesting one for you all.
our company recently deployed a new server.
server 2012 r2
configuration
setup
all worked correctly
after all was done, updates were installed, afterwards the server would have a black screen of death over rdp and a slew of issues locally.
tried to remotely deploy http://support2.microsoft.com/kb/2897632 which was supposed to address this.
no go...
since this already happened 3 times in a row i'm not quite sure how to go about this apart from disabling updates or excluding the problematic one. alas not sure which one it is.
what should the next course of action be? restore backups or re-image are fruitless since the same update will render it bad all over again.

That is not a scripted answer. It might be that you have a driver that is not compatible with recent Windows Updates which might cause that: That is why I have made the previous suggestion.
I never heard about black screen issue after the one fixed by KB2897632. My recommendation would be to check with your server support if they have known compatibility problems for Windows Server 2012 R2 running on their hardware.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

When saving a document, pages unexpectedly quit three times in a row. Any idea why?

When I was saving a document I previously duplicated, Pages unexpectedly quit three times in a row. Ideas?

Welcome to the Apple Discussions.
Are the photos still visible in the Library? If so, Back Up and try rebuild the library: hold down the apple and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
It’s possible that these crashes have damaged the database file. If the above does not help:
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

Hi folks! My MacBook Air is making awkward little chipping sound... For no apparent reason. My Macbook Pro does the same. Goes like "chip... chip... chip", always three times in a row, for no apparent reason. Does anyone know how this occurs? Thanks

Hi folks! My MacBook Air is making awkward little chipping sound... For no apparent reason. My Macbook Pro does the same. Goes like "chip... chip... chip", always three times in a row, for no apparent reason. Does anyone know how this occurs?
It seems to be linked to the sound being on. When I mute the thing, it doesn't do it. When I plug headphones into it, it does it over the headphones.
Thanks for your help!

Hi folks! My MacBook Air is making awkward little chipping sound... For no apparent reason. My Macbook Pro does the same. Goes like "chip... chip... chip", always three times in a row, for no apparent reason. Does anyone know how this occurs?
It seems to be linked to the sound being on. When I mute the thing, it doesn't do it. When I plug headphones into it, it does it over the headphones.
Thanks for your help!

[SOLVED] submarine: only builds after running makepkg 2 times in a row

I just adopted and updated this package that wasn't updated in years: submarine.
Now, it works, but with a caveat...as the title says, I have to execute makepkg two times: the first one fails.
To be more precise, what I need to do is to execute make two times in a row; however, as the first make fails, makepkg exits with an error status.
Now, the question is: is there any way to force makepkg not to exit after the first make? Or, even better: do you suggest anything to improve this messy situation?
PS. currently the PKGBUILD only has one make in the build function, because putting two 'make's in there is useless (as makepkg exits after the first one).
PS2. There is a -git version of submarine too (here), but it has the same problems.
Last edited by thiagowfx (2015-02-02 12:48:17)

The upstream code is not much maintained nowadays, in fact there are several warning messages about deprecated functions used in Vala, but it works fine and it is still an useful software.
Both suggested solutions work, but I'll go with make -j1 because it looks more cleaner to me. Thanks for your responses.

Sometimes I hear a clicking or static sound followed by the inability of my caller to hear me, although I can hear them. Often happens several times in a row.

Sometimes I hear a clicking or static sound followed by the inability of my caller to hear me although I can hear them. Sometimes happens several times in a row.

NLEdit,
Here's what I have (to the best of my knowledge):
Original source: mini DV tape, it's all HD
I use capture now to digitize the whole tape. My easy setup is: HDV- 1080i60 FiriWire Basic. After I have digitized all of it - it's an .mov file with the settings I just posted above. So when final cut is done digitizing I already have all the files in my browser window and I just drag them and drop them in the timeline and I choose to match the timeline settings if they're different. So my timeline settings look like this:
Frame Size: 1440x1080
Vid Rate: 29.97 fps
Compressor: HDV 1080i60
When I'm done editing, I use batch export to export a bunch of sequences (they all have the same settings I just mentioned above) and I chose:
Format: QuickTime (custom), Compression Type H.264, frame rate: 29.97 fps, key frames: every 24frames, compressor quality- high, encoding: best quality. Then for size I choose either 1280x720 HD or I use "custom" to make them half the size of that so that would be 640x360. My point is to end up with an .mov file which I can then encode into an flv or just burn it on a data cd.
As for your question number 1: I'm not even sure what you mean by that.
Does all that make any sense now?

Microsoft.SharePoint.Administration.SPAppStateQueryJobDefination failed 3 times in a row.

Hi all,
I got an log file in SharePoint server which was showing me two warning.
1)
Fast revocation part of the Execute method of the app upgrade/killbit timer job definition Microsoft.SharePoint.Administration.SPAppStateQueryJobDefinition failed 3 times in a row. This failure requires on-call engineer attention from both SharePoint and
SharePoint Store teams.
product: SharePoint Foundation
Event ID:8333
2)
The Execute method of job definition Microsoft.SharePoint.Administration.SPAppStateQueryJobDefinition (ID 66bd473c-9b16-4473-8285-a51259c4fc40) threw an exception. More information is included below. Sorry, we can't seem to connect to the SharePoint
Store. Try again in a bit.
product: SharePoint Foundation
Event ID:6398
please help me out, it's an urgent
ank89

Do you have any devices between the SharePoint server and the Internet (even a host-based firewall) blocking outbound TCP/80? SharePoint must be able to connect to the store.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Microsoft.SharePoint.Administration.SPAppStateQueryJobDefinition failed 3 times in a row

Hi, we have had the following critical error come up on our (SP Server 2013) application server :
“Fast revocation part of the Execute method of the app upgrade/killbit timer job definition Microsoft.SharePoint.Administration.SPAppStateQueryJobDefinition failed 3 times in a row. This failure
requires on-call engineer attention from both SharePoint and SharePoint Store teams.” (Task Category is App Deployment)
This was followed immediately by the following critical error:
“The Execute method of job definition Microsoft.SharePoint.Administration.SPAppStateQueryJobDefinition (ID 881a2c17-39e5-4e86-89c5-f7e7289ca448) threw an exception. More information is included
below.
Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit.” (Task Category is Timer)
I'm not seeing anything in the Central Admin Health Analyzer issues that relate to this - also appears to be the first time is has happened.
I have had a look online but can’t seem to find anything similar.

Hi, we have had the following critical error come up on our (SP Server 2013) application server :
“Fast revocation part of the Execute method of the app upgrade/killbit timer job definition Microsoft.SharePoint.Administration.SPAppStateQueryJobDefinition failed 3 times in a row. This failure
requires on-call engineer attention from both SharePoint and SharePoint Store teams.” (Task Category is App Deployment)
This was followed immediately by the following critical error:
“The Execute method of job definition Microsoft.SharePoint.Administration.SPAppStateQueryJobDefinition (ID 881a2c17-39e5-4e86-89c5-f7e7289ca448) threw an exception. More information is included
below.
Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit.” (Task Category is Timer)
I'm not seeing anything in the Central Admin Health Analyzer issues that relate to this - also appears to be the first time is has happened.
I have had a look online but can’t seem to find anything similar.
If these errors are occurring around 3am and the server does not have access to the Internet, the cause could be the Customer Experience Improvement Program (CEIP) failing to contact the CEIP servers. Disable CEIP at the farm level in CA->System
Settings->Configure Privacy Options.
Also, disable this in each web application including the SharePoint Central Admin web application.
Then, just to make sure, disable the CEIP Data Collection timer job. With the June CU the problem may recur even with the CEIP options disabled in CA.
Credit for this find goes to
Ian Ankers's SharePoint Blog post.

My MacBook Pro force shut down three times in a row. What is going on?

I just updated my MacBook Pro from the app store and now my MacBook force shut down three times in a row.
I need to know what is going on. I am a college student and can't afford to waste time to figure this out. If it happens again I am just going to take it to a repair store to find out what is wrong. If it ends up that it can't be fixed then I will have to buy a new one on the spot.
I hope I don't have to buy a new MacBook Pro.

Reboot in safe mode and test again,

Why does my MacBook Pro keep beeping three times in a row?

It won't turn on and It beeps three times about every 5 seconds. What does this mean?

Usually indicative of a RAM issue.
http://support.apple.com/kb/HT5860?viewlocale=en_US

A Table that was created at Run time. A Row Properly Deleted from Table Is Still Present on Form with BindingNavigator

Hello
I have a dataset that was created at design time
but - after I run the app, it randomly creates a table based on The Users name
since I do not know the users name before had, the table is not part of my existing dataset
(I actually used an insert into sql nonquery to just make this table a copy of the masterUserTable)
Now - I have a binding navigator on my form, that is originally bound to masterUserTable, but my goal is to make it bound to the users table (let's say GabrielUserTable)
I thought I did so with this code:
'TODO: This line of code loads data into the 'MyLearningDBDataSet.masterUserTable' table. You can move, or remove it, as needed.
Me.MyMainDBTableAdapter.Fill(Me.MyLearningDBDataSet.masterUserTable)
Dim ThisNewVariable As String = MyUserNameIs & "UserTable"
Dim ThisNewTableName As New DataTable
Me.MyLearningDBDataSet.masterUserTable.TableName = ThisNewVariable
Me.MyMainDBTableAdapter.Fill(Me.MyLearningDBDataSet.masterUserTable)
that appeared to do the trick (but if it is incorrect please advice on the proper way to add a table made at runtime to a users existing datset)
Else where in my code I successfully execute the following NonQuery :
SqlString= "DELETE FROM " & MyUserNameIs & "UserTable" & vbCrLf &
"WHERE vState='" & txtStateInfo.Text & "';"
I check in Visual Studio 2013 that the row was deleted from the "GabrielUserTable" (Gabriel is the current value of MyUserNameIs) by using the Server Explorer and right clicking
on the table and choosing show talbe data
But the MyMainDBBindingNavigator is still showing the item I deleted.
So after searching for answers - I created a new button for testing and added the following code to test if it would work
Me.Validate()
Me.MyMainDBBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MyLearningDBDataSet)
but the data is still shwoing after deleting it with my NonQuery
Please Help!

Hi genterprise,
>> Now - I have a binding navigator on my form, that is originally bound to masterUserTable, but my goal is to make it bound to the users table (let's say GabrielUserTable)
In my option, if you want to rebind the users table to the navigator, you need to set the BindingNavigator.BindingSource. Based on your description, it seems that you did not reset the datasoure of the MyMainDBBindingNavigator. It was the original datasource
of the masterUserTable. For more details about BindingNavigator.BindingSource Property. You could refer the link below:
# BindingNavigator.BindingSource Property
https://msdn.microsoft.com/en-us/library/system.windows.forms.bindingnavigator.bindingsource%28v=vs.110%29.aspx?f=255&MSPPError=-2147217396
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

4 beeps 5 times in a row

Similar Messages

Maybe you are looking for