4 TB database and FRA

Hi
here the situation
- we have a 4TB OLTP database.
- RAC ASM 10g r2 AIX 5.3
- We want to go with RMAN - TSM for backup strategy
a DBA near me say, we need 5 TB for the FRA because RMAN Level-0 needs to be in the FRA + logs + .... !!! woooow ! it's money !
Is it true ?
My idea is: Use FRA only for Control Files, Archive logs, Flashback logs.
Whta is your opinion ?
Bests regards
Val.
Edited by: Valeria. on Jun 10, 2010 10:07 PM

Too many unknowns from your post. You should check Planning the Size of the Flash Recovery Area to help with some of your sizing requirements.
Your size requirements could be significantly less if you can't get the additional disk storage and decide to use TSM to to backup directly to tape.

Similar Messages

ASM and FRA

Installed Oracle 11g R2. Configured ASM +DATA (for data files) and FRA (for backups).
If the FRA diskgroup (which is non-raided) stops working due to the disk failure, assume all other disks (OS and DATA) are still operating normally, will the Oracle database can still be used/accessed by the user?

MORE INFO to add:
Ideally, the FRA should be on RAID 1. But due to the configuration limitation, I can only use one disk for FRA and the spare one for holding the multiplexing files such as REDO, CONTROL, and ARCHIVE.
By this way, DATA (Two ASM disks + raid 1), FRA (One ASM disk, non-raid), and Multiplexing (one regular disk, non-raid).
DATA (redo log + control + others) --> multiplexes to --> Multiplex Disk (mentioned above to hold redo log + control)
FRA (archive + all other backups) --> multiplexes to --> Multiplex Disk (mentioned above to hold archive)
Like to hear your opinion and comments.
P.S. The FRA will hold the backups only, nothing else. And DATA (Two ASM disks + raid 1) will hold the regular oracle data files + redo, control and other related files, nothing else.
Edited by: scottjhn on Aug 27, 2012 3:18 PM

Logical Database and Logical Thing

Hi,
i want to access KONV which is cluster table and the field is KWERT.
The thing is that i want to access it by taking customers from KNVV and giving it to VBRK (SALES Table). Now in VBRK i want to have a selection on FKDAT to get a list of Customers stored in the field called KUNAG.
on VBRK-KUNAG basis i want to access the table KONV-KWERT.
If i am doing queries then the System stops responding cuz it has got alot of overhead. So i tried to use Logical Database called VFV.
If this is the best solution means using LDB then how to use it, can anyone help me with this. I tried it by Function module but it is showing all data without considering selection criteria.
If anyone can help me then plz do answer or refer me to any web site so that i can figure this thing out. If anyione has got a good book on that then plz feel free to mail me.
Thanks,
Muhammad Usman Malik
ABAP Consultant
Siemens
[email protected]
+92-333-2700972

Thanks Shibba that was very helpful, i applied that but the system overhead was so much.
can u help me with Dynamic selection code.
I used FREE_SELECTION_INIT, FREE_SELECTION_DIALOG and then FREE_SELECTIONS_RANGE_2_WHERE to get ther Selections in one table.
if u want me to send u the code then i can do that cuz i am getting so much mad that this work is not done yet.
The Scenario here is that we want to take BILLED Customers and VKORG as Industrial Billing Customer and then taking VBRK and giving all these Customers and then taking selection on FKDAT range.
Now after that the data should be collected from KONV-KWERT and i want to perform some calculation over it. I am using VFV (Logical Database) to perform this thing because i know that it would be very fast then applying my own queries.
If you can mail me any book on Logical Database and Dynamic selection then it will be very Helpful.
Thanks once again for being such helpful.
Muhammad Usman Malik
SAP Consultant
[email protected]
+92-333-2700972

Reference to database and/or server name in '' is not supported in this version of SQL Server

Hello all
I am using C# and ADO.NET (native) - Visual Studio 2013.
I am always using full qualified queries like "SELECT * FROM [database].[schema].[table]"
Obviously there is a problem when doing this against SQL Azure,
I get the following error: "Reference to database and/or server name in '' is not supported in this version of SQL Server"
Interesting fact: With SQL Management Studio, the same query works.
I need to know if this error is really a true one or not.
If yes, I can quit using SQL Azure. I would need a SQL Server and not a partial SQL Server :-)
Thanks and best regards
Frank

Hi,
Here are my suggestions:
1. Use partially qualified queries, because:
a. from a security standpoint, you'd want to limit your login's access across the server instance
b. in order to achieve a even better, you should specify your database as the Initial Catalog directly in the SQL Connection.
If you take into account these practices, SQL Database doesn't come with any limitation from that point of view.
However, in regard to 'With SQL Management Studio, the same query works', this is actually only partially true because if you run that query agains ADO.NET, you'll actually end up in switching databases along the query which is obviously not permitted in
SQL Database since you're running in a hosted black-box version of SQL you're not managing. It's just like running the USE <dbname> command which obviously doesn't work.
Alex

Jasper report on HTML when one image loaded from database and for the other

How to generate jasper report on HTML when one image loaded from database and for the other we give a image path
My code
ByteArrayOutputStream baos = new ByteArrayOutputStream();
          exporter = new JRHtmlExporter();
          exporter.setParameter(JRExporterParameter.JASPER_PRINT, print);
          exporter.setParameter(JRExporterParameter.OUTPUT_STREAM, baos);
          exporter.setParameter(JRHtmlExporterParameter.IMAGES_URI, strImageInputDirectory);
     exporter.setParameter(JRHtmlExporterParameter.IMAGES_DIR_NAME, strImageOutputPath == null ? "." : strImageOutputPath);
     exporter.setParameter(JRHtmlExporterParameter.IS_OUTPUT_IMAGES_TO_DIR, Boolean.TRUE);
     exporter.setParameter(JRHtmlExporterParameter.IS_USING_IMAGES_TO_ALIGN, Boolean.FALSE);
     exporter.setParameter(JRHtmlExporterParameter.IS_WHITE_PAGE_BACKGROUND, Boolean.FALSE);
          exporter.exportReport();
          byte[] bdata = ((ByteArrayOutputStream) baos).toByteArray();
Can any one help pls
Message was edited by:
ameet.au

hey sorry for posting it in this forum.
but do u have sample code for making it work.. since i am able to do it on PDF format(image from Database and another stored in the webserver) using
byte image[] =(byte[]) outData.get("image");
                    ByteArrayInputStream img = new ByteArrayInputStream(image);
                    hmimg.put("P_PARAMV3", img);
print = JasperFillManager.fillReport(reportFileName, hmimg, jrxmlds);
bdata= JasperExportManager.exportReportToPdf(print);

I m using ms access as database and i want to create a login page in java

hye frnz... plz help me m new to java
m using ms access as database and try to create a login page where user type username and pw
i had enter valid user entries in database i checked connectivity is working i want as user login the main window must open after checking username and pw field to database but
now there is an error class not found exception sun:jdbc...... error
plz help me i had stuck frm 4 days */
import java.sql.DriverManager;
import java.sql.Connection;
import java.sql.Statement;
import java.sql.ResultSet;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
class Login extends JFrame
//Component Declarations
JLabel jlb1,jlb2;
     JTextField jtf1;
     JPasswordField jpf1;
     JButton jb1,jb2;
     //Constructor
     Login()
     //frame settings
          setTitle("Login Dialog");
          setLayout(new GridBagLayout());
          GridBagConstraints gbc = new GridBagConstraints();
          setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
          Dimension d= Toolkit.getDefaultToolkit().getScreenSize();
          setBounds(d.width/2-175,d.height/2-100,350,200);
          gbc.insets=new Insets(7,7,7,7);
     //adding components
          jlb1=new JLabel("User ID");
          gbc.gridx=0;
          gbc.gridy=0;
          add(jlb1,gbc);
          jlb2=new JLabel("Password");
          gbc.gridx=0;
          gbc.gridy=1;
          add(jlb2,gbc);
          jtf1=new JTextField(10);
          gbc.gridx=1;
          gbc.gridy=0;
          add(jtf1,gbc);
          jpf1=new JPasswordField(10);
          gbc.gridx=1;
          gbc.gridy=1;
          add(jpf1,gbc);
          jb1=new JButton("Login");
          gbc.gridx=0;
          gbc.gridy=2;
          add(jb1,gbc);
          jb1.addActionListener(new ActionListener()
               public void actionPerformed(ActionEvent ae)
               Connection conn=null;
                    Statement stmt=null;
                    boolean found=false;
               try
                         Class.forName("sun.jdbc.driver.JdbcOdbcDriver");
                         String dataSourceName = "Inventory";
                         String dbURL = "jdbc:odbc:" + dataSourceName;
                         conn=DriverManager.getConnection(dbURL, "","");
                         stmt=conn.createStatement();
                         ResultSet rst=stmt.executeQuery("Select * from User");
                         System.out.println(jtf1.getText()+"/t"+jpf1.getPassword());
                         while(rst.next())
                              System.out.println( rst.getString(1) +"/t"+ rst.getString(2));
          if(jtf1.getText().equals(rst.getString(1).trim()) && new String(jpf1.getPassword()).equals(rst.getString(2).trim()))
                                   found=true;
                                   rst.close();
                                   dispose();
                                   MainWindow mw= new MainWindow();     /*created min window object created to be opend after login but not working*/
                                   break;
                         rst.close();
                         stmt.close();
                         conn.close();
                    catch(ClassNotFoundException e){System.out.print(e);}
                    catch(Exception e){System.out.print(e);}
                    if(found==false) /*this portion is executing and dialog box appears invalid name and pw with class not found exception sun:jdbc.......on console */
                         JOptionPane.showMessageDialog(null,"Invalid username or password",
                              "Error Message",JOptionPane.ERROR_MESSAGE);
          jb2=new JButton("Clear");
          gbc.gridx=1;
          gbc.gridy=2;
          add(jb2,gbc);
          jb2.addActionListener(new ActionListener()
               public void actionPerformed(ActionEvent ae)
                    jtf1.setText("");
                    jpf1.setText("");
                    jtf1.requestFocus();
          setSize(350,200);
          setVisible(true);
          jtf1.requestFocus();
     public static void main(String args[])
Login l=new Login();
}

http://forums.oracle.com/forums/ann.jspa?annID=599
Oh, and by the way, your keyboard seems to be broken as your words are not getting spelled correctly.

Swapping between client database and web database

Hi i have completed tutorials etc so can now create the
sqlite database for my application which is downloaded by the user
and will run on thier desktop so i am calling it the "client
database" which contains data they are working with but there is
another database containing identical tables which i am calling the
"global database" the idea of this is to transfer data between the
different clients and backup that information.
so i am looking for a tutorial or a sample app where the app
takes information from a web based database and copy's that rob
into a sqlite database on the clients machine?
this is the main problem im having and seen people mentioning
blaze DS and stuff like that, ideally i wouldn't like to use PHP
but atm is looking like i may have to.
i will sell my soul to anyone who can help with this lol
(also i am using FLEX 3.0)

Hi,
Yes, if you use LCDS everything is there already for you, so
that you can complete this application in very less time. Since you
want to use PHP, you can use Zend PHP, which will support Remoting
using AMF. Using Zend PHP, write PHP classes which will help you to
synchronize data between server and client and just invoke those
from your Flex application when required.
Hope this helps.

Database and Server Report

Hi,
I want to assist my friend (he is same like me, newbie in oracle) to give a report on health of oracle database and server; which is running in his small software development and data feeding company. There are around
1. 50 users,
2. windows XP professional,
3. Oracle9i Enterprise Edition Release 9.2.0.1.0 – Production,
4. one database, No Archive Mode, oracle home is : c:\oracle\ora92 and database is stored at D:\ORACLE\oradata\orcl, 3 control files, 3 redo groups and 11 dbfs
5. 2.27 GB is free space on the drive of oracle home,
6. more than 1 GB RAM is in the system,
7. <what else more; I should describe, please let me know>
He has to submit a report on current status, health, performance etc. of oracle database and server. How should we design and get the data, please guide me.
Thanks & Regards

You Mean Helath Check Report of the DB
Tablespace size?
Datafile Size?
Default tablespace?
UNDO management?
SGA?
buffer cache hit ratio?
library cache hit ratio?
There are so many other parameters..Performance cannot be predicted from remote site
But you can provide certain information
Here are some views which could be helpful
DBA_TABLESPACE
DBA_FREE_SPACE
DBA_DATA_FILES
V$CONTROLFILE
V$LOG--Meaning less since you run in archived mode
Number of Oracle Process allocated
UNDO RETENTION
SQL>show parameter process
SQL>show parameter UNDO
Do you have METALINK acces
1019546.6
this has everything then you can pass whatever they need
and many more

Powershell use Connection String to query Database and write to Excel

Right now I have a powershell script that uses ODBC to query SQL Server 2008 / 2012 database and write to EXCEL
$excel = New-Object -Com Excel.Application
$excel.Visible = $True
$wb = $Excel.Workbooks.Add()
$ws = $wb.Worksheets.Item(1)
$ws.name = "GUP Download Activity"
$qt = $ws.QueryTables.Add("ODBC;DSN=$DSN;UID=$username;PWD=$password", $ws.Range("A1"), $SQL_Statement)
if ($qt.Refresh()){
$ws.Activate()
$ws.Select()
$excel.Rows.Item(1).HorizontalAlignment = $xlCenter
$excel.Rows.Item(1).VerticalAlignment = $xlTop
$excel.Rows.Item("1:1").Font.Name = "Calibri"
$excel.Rows.Item("1:1").Font.Size = 11
$excel.Rows.Item("1:1").Font.Bold = $true
$filename = "D:\Script\Reports\Status_$a.xlsx"
if (test-path $filename ) { rm $filename }
$wb.SaveAs($filename, $xlOpenXMLWorkbook) #save as an XML Workbook (xslx)
$wb.Saved = $True #flag it as being saved
$wb.Close() #close the document
$Excel.Quit() #and the instance of Excel
$wb = $Null #set all variables that point to Excel objects to null
$ws = $Null #makes sure Excel deflates
$Excel=$Null #let the air out
I would like to use connection string to query the database and write results to EXCEL, i.e.
$SQL_Statement = "SELECT ..."
$conn = New-Object System.Data.SqlClient.SqlConnection
$conn.ConnectionString = "Server=10.10.10.10;Initial Catalog=mydatabase;User Id=$username;Password=$password;"
$conn.Open()
$cmd = New-Object System.Data.SqlClient.SqlCommand($SQL_Statement,$conn)
do{
try{
$rdr = $cmd.ExecuteReader()
while ($rdr.read()){
$sql_output += ,@($rdr.GetValue(0), $rdr.GetValue(1))
$transactionComplete = $true
catch{
$transactionComplete = $false
}until ($transactionComplete)
$conn.Close()
How would I read the columns and data for $sql_output into an EXCEL worksheet. Where do I find these tutorials?

Hi Q.P.Waverly,
If you mean to export the data in $sql_output to excel document, please try to format the output with psobject:
$sql_output=@()
do{
try{
$rdr = $cmd.ExecuteReader()
while ($rdr.read()){
$sql_output+=New-Object PSObject -Property @{data1 = $rdr.GetValue(0);data2 =$rdr.GetValue(1)}
$transactionComplete = $true
catch{
$transactionComplete = $false
}until ($transactionComplete)
$conn.Close()
Then please try to use the cmdlet "Export-Csv" to export the data to excel like:
$sql_output | Export-Csv d:\data.csv
Or you can export to worksheet like:
$excel = New-Object -ComObject Excel.Application
$excel.Visible = $true
$workbook = $excel.Workbooks.Add()
$sheet = $workbook.ActiveSheet
$counter = 0
$sql_output | ForEach-Object {
$counter++
$sheet.cells.Item($counter,1) = $_.data1$sheet.cells.Item($counter,2) = $_.data2}
Refer to:
PowerShell and Excel: Fast, Safe, and Reliable
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

ASM Disk preparation for Datafiles and FRA in Oracle 10g RAC Inst

Dear Friends,
Please clarify wheteher the below method is correct to confiure ASM disks for Datafiles and FRA
Partitions provided by IT team for OCR and Voting Disk
/dev/sda1 - 150 GB (For +DATA)
/dev/sda2 - 100 GB (For +FRA)
OS : RHEL 5.6 (64 Bit)
kernel version = 2.6.18-238.el5
Steps:(Node1)
1) Install the RPM's for ASM
rpm -Uvh oracleasm-support-2.1.7-1.el5.x86_64.rpm
rpm -Uvh oracleasm-2.6.18-238.el5-2.0.5-1.el5.x86_64.rpm
rpm -Uvh oracleasmlib-2.0.4-1.el5.x86_64.rpm
2) Configure ASM
/etc/init.d/oracleasm configure
Default user to own the driver interface []: oracle
Default group to own the driver interface []: dba
Start Oracle ASM library driver on boot (y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n) [y]:
Writing Oracle ASM library driver configuration: done
Initializing the Oracle ASMLib driver: [ OK ]
Scanning the system for Oracle ASMLib disks: [ OK ]
3) Cretae ASM Disk
/etc/init.d/oracleasm createdisk DISK1 /dev/sda1
/etc/init.d/oracleasm createdisk DISK2 /dev/sda2
4)/etc/init.d/oracleasm status
5)/etc/init.d/oracleasm scandisks
6)/etc/init.d/oracleasm listdisks
7) Nothing to perform on Node2
8) In dbca choose ASM and map the DISK1 for datafiles and DISK2 for FRA
Please confirm the above steps are right?if not please clarify
If DBCA ->ASM doesn't discover my disk then what should be the Discovery path i have to give?
Please refer any document / Metalink ID for the above complete process
Can i have ASM and oracle DB binary in the same home
Regards,
DB

user564706 wrote:
If DBCA ->ASM doesn't discover my disk then what should be the Discovery path i have to give?for asm disk created with oracleasm discovery path variable is ORCL:*
Please refer any document / Metalink ID for the above complete processhttp://docs.oracle.com/cd/B19306_01/install.102/b14203/storage.htm#BABIFHAB
Can i have ASM and oracle DB binary in the same homeyes. unless you want job role seperation or plan to run multiple versions of oracle homes
>
Regards,
DB

What should i do with an Oracle 11g Database, MySQL database and a dump file.

I just joining to a new work field, almost about a database and i know "NOTHING" about this field.
My company has a system that running by Oracle Database, the problem is that Oracle Database will cost a lot of money when my company expands.
So the quest is converting Oracle Database to MySQL database.
Of course i cant try to convert it in the main Database, so i create one Oracle 11g Database on my LocalHost, and it already actived in " Localhost:1158 " etc.
I have another Sever test that already set up MySQL database, and a dump file from the system.
So I want to ask these 2 questions :
1. How to create an new Oracle Database from that dump file ?
2. Is it alright if i use tool to convert Oracle Database into MySql, or i should do it manually ?
Thanks alot.

I just joining to a new work field, almost about a database and i know "NOTHING" about this field.
My company has a system that running by Oracle Database, the problem is that Oracle Database will cost a lot of money when my company expands.
So the quest is converting Oracle Database to MySQL database.
I predict that converting to MySQL will cost your company more as it expands. As you expand managing contention becomes more important - Oracle does this for you. I do not think MySQL does, so you'll have to write more code to deal with this, costing the company money. A big part of making application scalable and reliable is to use stored procedures, how good are MySQL's compared to PL/SQL's. What other features are there that MySQL has that will benefit your company that Oracle doesn't. What do you need to think about as your company expands that need to be taken care of in the database. I would have thought a migration from MySQL to Oracle would be more common to deal with expansion.
As you know "NOTHING" you need to think about what each database can give you for the next 10 years to cope with you businesses potential requirements, and extimate how much it will cost to implement these requirements, then make the decision

How can i compare two databases and their tables

i have a text.txt file then
i will insert it into db_header and db_details
db_header has tbl_pcountheader with fld_Rack_No(char) PK and fld_DateAdded(date) PK
db_details has tbl_pcountdetails with fld_Rack_No(char) PK, fld_Barcode(char) PK and fld_Quantity(int)
then i will lookup in db_products
db_products has tbl_products and tbl_barcodes
tbl_products has fld_ItemCode
tbl_barcodes has fld_Barcode and fld_ItemCode
now i want to make a prompt contains
Rack No: Date:
Counter No:
Barcode | Item Code | Item Description | Quantity
how can i fill up this by comparing db_details and db_products?
Private Sub bt_upload_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles bt_upload.Click
If saveCheckBox.Checked = False Then
MsgBox("Please click the box to continue.")
Return
End If
If lb_file.SelectedItem Is Nothing Then
MessageBox.Show("Please select a file.")
Exit Sub
End If
' Obtain the file path from the list box selection.
Dim filePath = lb_file.SelectedItem.ToString
' Verify that the file was not removed since the Browse button was clicked.
If System.IO.File.Exists(filePath) = False Then
MessageBox.Show("File Not Found: " & filePath)
Exit Sub
End If
' Obtain file information in a string.
Dim fileInfoText As String = GetTextForOutput(filePath)
'LookUP db_header, db_details and db_products
Dim cs As String = "Database=;Data Source=localhost;" _
& "User Id=root;Password=1234"
Dim conn As New MySqlConnection(cs)
Dim ds As New DataSet
Dim da As New MySqlDataAdapter
Dim cmd As New MySqlCommand
Dim dt As New DataTable
Dim stm As String = "SELECT tbl_pcountheader.fld_Rack_No, tbl_pcountheader.fld_DateAdded, tbl_pcountdetails.fld_Barcode, tbl_products.fld_ItemCode, tbl_products.fld_ItemDesc, tbl_pcountdetails.fld_Quantity FROM db_header.tbl_pcountheader INNER JOIN db_details.tbl_pcountdetails ON db_details.tbl_pcountdetails.fld_Rack_No = db_header.tbl_pcountheader.fld_Rack_No INNER JOIN db_products.tbl_barcodes ON db_details.tbl_pcountdetails.fld_Barcode = db_products.tbl_barcodes.fld_Barcode INNER JOIN db_products.tbl_products ON db_products.tbl_barcodes.fld_ItemCode_fk = db_products.tbl_products.fld_ItemCode GROUP BY tbl_pcountheader.fld_Rack_No, tbl_pcountheader.fld_DateAdded ORDER BY tbl_pcountheader.fld_Rack_No"
ds = New DataSet
Try
conn.Open()
da = New MySqlDataAdapter(stm, conn)
da.Fill(ds, "tbl_pcountheader")
DataGridView1.DataSource = ds.Tables("tbl_pcountheader")
Dim headers = (From header As DataGridViewColumn In DataGridView1.Columns.Cast(Of DataGridViewColumn)() _
Select header.HeaderText).ToArray
Dim rows = From row As DataGridViewRow In DataGridView1.Rows.Cast(Of DataGridViewRow)() _
Where Not row.IsNewRow _
Select Array.ConvertAll(row.Cells.Cast(Of DataGridViewCell).ToArray, Function(c) If(c.Value IsNot Nothing, c.Value.ToString, ""))
Using sw As New IO.StreamWriter("c:\report.txt", append:=True)
sw.WriteLine(String.Join(",", headers))
For Each r In rows
sw.WriteLine(String.Join(",", r))
Next
End Using
ds.WriteXmlSchema("Sample.xml")
Dim cr As New CrystalReport1()
cr.SetDataSource(ds)
CrystalReportviewer1.ReportSource = cr
CrystalReportviewer1.Refresh()
Catch ex As MySqlException
MsgBox("Error: " & ex.ToString())
Finally
conn.Close()
End Try
' Show the file information.
Dim PrintPrompt As String
PrintPrompt = MsgBox(fileInfoText, MsgBoxStyle.YesNo, "ProofList")
If PrintPrompt = vbYes Then
'fileInfoText.print()
If saveCheckBox.Checked = True Then
' Place the log file in the same folder as the examined file.
Dim bakFolder As String = System.IO.Path.GetDirectoryName(filePath)
Dim bakFilePath = System.IO.Path.Combine(bakFolder, "back-up.bak")
Dim bakText As String = "Backed-Up: " & Date.Now.ToString & vbCrLf & fileInfoText & vbCrLf & vbCrLf
' Append text to the log file.
'System.IO.File.AppendAllText(bakFilePath, bakText)
My.Computer.FileSystem.WriteAllText(bakFilePath, bakText, append:=True)
'My.Computer.Network.UploadFile(bakFilePath, "C:\Documents and Settings\SAPC-TECH\My Documents\back-up file.bak", "", "", False, 1000)
'My.Computer.FileSystem.DeleteFile(bakFilePath)
'Form2.Show()
End If
'Note: This message box shows that you've uploaded a file and back up it.
MessageBox.Show("Already backed-up to ")
Else
'Me.Close()
'Application.Exit()
'End
End If
'Me.DialogResult = System.Windows.Forms.DialogResult.Cancel
'Form2.Close()
'Me.Close()
End Sub
here's my final code that solves my problem.
i just make the environment of vb into mysql console
so that i can call all the database that i wanted.

Private Sub bt_upload_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles bt_upload.Click
If saveCheckBox.Checked = False Then
MsgBox("Please click the box to continue.")
Return
End If
If lb_file.SelectedItem Is Nothing Then
MessageBox.Show("Please select a file.")
Exit Sub
End If
' Obtain the file path from the list box selection.
Dim filePath = lb_file.SelectedItem.ToString
' Verify that the file was not removed since the Browse button was clicked.
If System.IO.File.Exists(filePath) = False Then
MessageBox.Show("File Not Found: " & filePath)
Exit Sub
End If
' Obtain file information in a string.
Dim fileInfoText As String = GetTextForOutput(filePath)
'LookUP comparison db_details to db_products
'Dim connString As String = "Database=db_products;Data Source=localhost;" & "User Id=root;Password=1234"
'Dim conn As New MySqlConnection(connString)
'Dim cmd As New MySqlCommand()
'Try
' conn.Open()
' cmd.Connection = conn
' cmd.CommandText = "SELECT Database1.dbo.TableName.ColumnName, Database2TableName.Name, 'The reason why Database 2 isnt defined is the fact that it has been defined in the connection" _
' FROM Database2TableName INNER JOIN _
' Database2TableName2 INNER JOIN _
' WHERE (Database1.dbo.TableName.ColumnName = '')"
' cmd.Prepare()
' cmd.ExecuteNonQuery()
' conn.Close()
'Catch ex As Exception
'End Try
' Show the file information.
Dim PrintPrompt As String
PrintPrompt = MsgBox(fileInfoText, MsgBoxStyle.YesNo, "ProofList")
If PrintPrompt = vbYes Then
'fileInfoText.print()
If saveCheckBox.Checked = True Then
' Place the log file in the same folder as the examined file.
Dim bakFolder As String = System.IO.Path.GetDirectoryName(filePath)
Dim bakFilePath = System.IO.Path.Combine(bakFolder, "back-up.bak")
Dim bakText As String = "Backed-Up: " & Date.Now.ToString & vbCrLf & fileInfoText & vbCrLf & vbCrLf
' Append text to the log file.
'System.IO.File.AppendAllText(bakFilePath, bakText)
My.Computer.FileSystem.WriteAllText(bakFilePath, bakText, append:=True)
'My.Computer.Network.UploadFile(bakFilePath, "C:\Documents and Settings\SAPC-TECH\My Documents\back-up file.bak", "", "", False, 1000)
'My.Computer.FileSystem.DeleteFile(bakFilePath)
Form2.Show()
End If
'Note: This message box shows that you've uploaded a file and back up it.
MessageBox.Show("Already backed-up to ")
Else
Me.Close()
Application.Exit()
End
End If
Me.DialogResult = System.Windows.Forms.DialogResult.Cancel
Form2.Close()
Me.Close()
End Sub
here's my code wherein i have to compare the two database and save it into .txt file
i just have to get this items
Rack No:
Date:
Counter No:
Barcode:
Item Code:
Item Description:
Quantity:
as a prooflist to be print out.

I am using the database connectivity toolkit to retrieve data using a SQL query. The database has 1 million records, I am retrieving 4000 records from the database and the results are taking too long to get, is there any way of speeding it up?

I am using the "fetch all" vi to do this, but it is retrieving one record at a time, (if you examine the block diagram) How can i retrieve all records in a faster more efficient manner?

If this isn't faster than your previous method, then I think you found the wrong example. If you have the Database Connectivity Toolkit installed, then go to the LabVIEW Help menu and select "Find Examples". It defaults to searching for tasks, so open the "Communicating with External Applications" and "Databases" and open the Read All Data. The List Column names just gives the correct header to the resulting table and is a fast operation. That's not what you are supposed to be looking at ... it's the DBTools Select All Data subVI that is the important one. If you open it and look at its diagram, you'll see that it uses a completely different set of ADO methods and properties to retrieve all the data.

Include or create a view in the database and use this view?

Well, I need to get related data of the main table from another related tables, so one way to do that is to use the Include method in Entity Framework to get this related data.
However, I am thinking in another option, create a view in the database and use this view in entity framework. In this way, I avoid the needed of the include, because I think that is expensive in resources. But I am no very sure about that.
I would like to know if the use of views on entity framework is a good idea to improve the performace or is better to use the include.
For example, if I use the include I have the advantage that I get only one the main record and all the related data I have in the navigation properties, so the info is more shorted.
Which is the advanteges and disadvantages of both methods to get related data in entity framework?
Thank so much.

Hello ComptonAlvaro,
>>I would like to know if the use of views on entity framework is a good idea to improve the performace or is better to use the include.
If your view would use a Join syntax to query master-child relationship tables, it actually is similar with the Include() method which actually results a duplicate records from master table, you could check this
link for detail description.
>>Which is the advanteges and disadvantages of both methods to get related data in entity framework?
One visible difference is that records from Views are not editable by default(if you want edit them, you could refer to this
blog).
In your case, my suggestion that you could use the lazying load which will load the matter table once and disable the trace if you only need to display data.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Database and page Load Issue

Well recently I needed to change the database tables and had to remove one table within the databse. Using MySQL 5
After I cleaned up all traces of information related to the table which was removed I decided to deploy and try out the application. When I try to enter one of the pages I get this error:
java.lang.RuntimeException: java.sql.SQLException: Error in allocating a connection. Cause: The connection is not valid as querying the table roles failed: Table 'database.table' doesn't exist
And here is the stack trace that came with the error:
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:384)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:297)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:247)
javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethodAccessorImpl.java:-2)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
java.security.AccessController.doPrivileged(AccessController.java:-2)
javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
java.security.AccessController.doPrivileged(AccessController.java:-2)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:723)
org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:482)
org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:417)
org.apache.catalina.core.ApplicationDispatcher.access$000(ApplicationDispatcher.java:80)
org.apache.catalina.core.ApplicationDispatcher$PrivilegedForward.run(ApplicationDispatcher.java:95)
java.security.AccessController.doPrivileged(AccessController.java:-2)
org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:313)
com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:130)
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:311)
com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:221)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethodAccessorImpl.java:-2)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
java.security.AccessController.doPrivileged(AccessController.java:-2)
javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
java.security.AccessController.doPrivileged(AccessController.java:-2)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
com.sun.rave.web.ui.util.UploadFilter.doFilter(UploadFilter.java:194)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:210)
org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
java.security.AccessController.doPrivileged(AccessController.java:-2)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)
The problem is I can't find any traces of the table i removed left in the project, I did a find all in the project of a keyword which will pick up on the table and removed it.
Another interesting fact is that when I remove the data providers in the page which have no connection to the table I removed the program will load fine. I also checked all my queries and they were all displaying correctly.
Any ideas?

I found out the reason for the error, the validation table I had set was used by the datasource, after I removed the table Java Studio Creator left traces of that and still tried to use the table for validation.
If anyone else has this problem, the way I fixed this was to open the Servers Window, expand the Deployment Server Node, expand the Resources folder and remove anything there even remotely related to your database, remove your database and re-add it.
Also, could this be considered a bug? I believe I have a way to reproduce it:
1) Create a database
2) Add a datasource set the Validation table to one of the tables
3) Remove that table from the database
That should cause the error to show up. When the datasource is removed shouldn't JSC remove any traces of the connection?
Lastly does this mean that JSC is checking the validation table everytime on deployment?
A response regarding this would be appreciated

4 TB database and FRA

Similar Messages

Maybe you are looking for