404 Not found when trying to redirect to another servlet

I have the following code in a httpservlet:
String formURL =
"/servlet/coreservlets.OrderPage";
// Pass URLs that reference own site through encodeURL.
formURL = response.encodeURL(formURL);
out.println
("<FORM ACTION=\"" + formURL + "\">\n" +
"<INPUT TYPE=\"HIDDEN\" NAME=\"itemID\" " +
" VALUE=\"" + item.getItemID() + "\">\n" +
"<H2>" + item.getShortDescription() +
" ($" + item.getCost() + ")</H2>\n" +
item.getLongDescription() + "\n" +
"<P>\n<CENTER>\n" +
"<INPUT TYPE=\"SUBMIT\" " +
"VALUE=\"Add to Shopping Cart\">\n" +
"</CENTER>\n<P>\n</FORM>");
When I try to run this in jdev, it can't find the servlet referenced - coreservlet.OrderPage and I get a 404. I added servlet mappings of various flavors to the web.xml to no avail. Here are some examples of things I have tried in the web.xml:
<servlet>
<servlet-name>OrderPage</servlet-name>
<servlet-class>coreservlets.OrderPage</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>OrderPage</servlet-name>
<url-pattern>/OrderPage</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>OrderPage</servlet-name>
<url-pattern>/servlet/OrderPage</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>coreservlets.OrderPage</servlet-name>
<url-pattern>/servlet/coreservlets.OrderPage</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>OrderPage</servlet-name>
<url-pattern>/coreservlets.OrderPage</url-pattern>
</servlet-mapping>
Any thoughts?

I think the problem is with the dot, because dot means an extension.
Where is your OrderPage servlet..?
<url-pattern>/servlet/coreservlets.OrderPage</url-pattern>
From this statement I think it is in the folder coreservlets which is insdie the directory servlet. If that is the case then
Instead of a dot in "/servlet/coreservlets.OrderPage"
try giving "/servlet/coreservlets/OrderPage"
Hope this helps.
Regards,
Anupama

Similar Messages

  • 404 not found when trying to make outbound calls

    Hi.
    Just got skype for business, incoming calls working fine but cannot get outbound to work.
    Any ideas?
         Call-ID: YzUwYWZiNDRlMTc0NzhlNDlmYjExMmRjNWFmZDE3M2Q.
         CSeq: 1 INVITE
         Session-Expires: 1800
         Accept: application/sdp, message/sipfrag
         Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, NOTIFY, INFO, REFER, PRACK
         Content-Type: application/sdp
         Supported: replaces, histinfo, 100rel, timer
         User-Agent: TeleVoice Trio Enterprise 3.2 TE 3.2.79
         History-Info: <s
         v=0
         o=- ****************330 1 IN IP4 192.168.0.191
         s=-
         c=IN IP4
         t=0 0
         m=audio 53018 RTP/AVP 8 101 0
         a=rtpmap:8 pcma/8000
         a=rtpmap:101 telephone-event/8000
         a=rtpmap:0 pcmu/8000
         sigcomp id=
     Resiprocate: (level=7)
         Adding message to tx buffer to: [ V4  UDP target domain= mFlowKey=0 ]
     Resiprocate: (level=7)
         incoming from: [ V4  UDP target domain=unspecified mFlowKey=352 ]
     Resiprocate: (level=
         CSeq: 1 INVITE
         Content-Length: 0
     Resiprocate: (level=7)
         incoming from: [ V4 UDP target domain=unspecified mFlowKey=352 ]
     Resiprocate: (level=
         CSeq: 1 INVITE
         Content-Length: 0
     [edited for privacy]

    can anyone over at Skype help, there seems to be no online chat support anymore, and I am a paying customer, very dissapointing!
    I have Skype Connect  (skype sip) setup for incoming calls and this has been working well for some time, but now i want to call out to skype users using the same account and I get both 407 and 404 errors, a redacted trace copied below:
    |Time     | xx.xxx.xx.xxx                         |
    |         |                   | 63.209.144.201    |                   
    |0.000    |         INVITE SDP (g711U g711A telephone-eventRTPType...1 CN)          |SIP From: "" <sip:[email protected] To:<sip:[email protected]
    |         |(5080)   ------------------>  (5060)   |
    |0.041    |         100 Trying|                   |SIP Status
    |         |(5080)   <------------------  (5060)   |
    |0.184    |         407 Proxy Authentication Required          |SIP Status
    |         |(5080)   <------------------  (5060)   |
    |0.184    |         ACK       |                   |SIP Request
    |         |(5080)   ------------------>  (5060)   |
    |0.185    |         INVITE SDP (g711U g711A telephone-eventRTPType...1 CN)          |SIP From: "" <sip:[email protected] To:<sip:[email protected]
    |         |(5080)   ------------------>  (5060)   |
    |0.225    |         100 Trying|                   |SIP Status
    |         |(5080)   <------------------  (5060)   |
    |0.857    |         404 Not Found                 |SIP Status
    |         |(5080)   <------------------  (5060)   |
    |0.857    |         ACK       |                   |SIP Request
    |         |(5080)   ------------------>  (5060)   |
    the (redacted) gateway config in freeswitch is:
    <include>
            <gateway name="skype">
            <param name="username" value="9xxxxxxxxxxxxx"/>
            <param name="realm" value="sip.skype.com"/>
             <param name="from-user" value="9xxxxxxxxxxxxx"/>
            <param name="from-domain" value="sip.skype.com"/>
            <param name="password" value="XXXXXXXXXXXXXX"/>
             <param name="extension" value="9xxxxxxxxxxxxx"/>
            <param name="proxy" value="sip.skype.com"/>
            <!-- <param name="register-proxy" value="stun.skype.com"/> -->
            <param name="register" value="true"/>
      <!-- which transport to use for register -->
            <param name="register-transport" value="udp"/>
      <!--How many seconds before a retry when a failure or timeout occurs -->
            <param name="retry-seconds" value="30"/>
            <param name="caller-id-in-from" value="false"/>
            <param name="contact-params" value="[email protected]"/>
            <param name="context" value="public"/>
          </gateway>
    </include>
    Can someone over at skype support assist? or anyone else who has experience with this?
     The 404 appears to be the more serious error but not sure if the 407 is causing the 404 and needs to be cleared up first.
    Thanks!

  • 404 Not Found When Trying to Make Outside Call on EX90/Movi/Etc

    All internal calls work just fine, but when we try to call an outside IP/hostname I keep getting 404 Not Found.  All outbound ports are open on our firewall and the VCS is setup in a DMZ.  Here are the call details:
    Call information
    State
    Connection Failed
    Start time
    2012-02-15 12:09:24
    Duration
    0 seconds
    Tag
    Serial number
    Bandwidth
    Requested
    0 kbps
    Allocated
    0 kbps
    Leg 1
    Bandwidth node
    Default Zone
    Source alias 1
    sip:<C40 hostname> (Url)
    Target alias 1
    sip:208.66.132.62 (Url)
    Protocol
    SIP
    Address
    <C40 IP>:5061
    Transport
    TLS
    Reason
    Not found
    Cause
    404
    Anyone have any ideas?

    Basically we have the following:
    EX90 = at a remote site
    C40 = at our corporate office
    Movi clients = at other remote sites
    VCS = at our corporate office
    The VCS has the Expressway option.  I'm really new to this so the top of the web interface says "Cisco TelePresence Video Communications Server Start Pack Express".  Options:
    0 Non Traversal Calls, 5 Traversal Calls, 50 Registrations, 900 TURN Relays, Expressway, Encryption, FindMe, Starter Pack.
    The endpoint is registered on the VCS with SIP.  Not using H323.  Basically the way you have to contact the EX90 from let's say the Movi client is via @. 
    The Dial Plan configuration shows Indirect, should it be Direct?
    I'm not sure if I have VCS Control and if I do not sure where that setting is and where would that rule be set?  On our Cisco ASA?  The thing is, our network engineer did a packet capture and when we did a call nothing even hit it.  So it's like it's stopping dead at the VCS.
    We were able to call out on the EX90 before the VCS was ever put in place, so it must be something in the VCS config.

  • 404 not found when trying to download Adobe Flex SDK build 4.0.0.10845

    Title says it all. I tried to download the nightly build and got a 404. Didn't find any "report broken link" on the actual download page, so I'm posting here in the hopes that the right people will see it.

    Jens,
    Thanks for the heads-up, we'll look into it.
    Peter

  • I get Server error 404 not found when downloading OSX LIONHELP

    I get Server error 404 not found when downloading OSX LION HELP!!!

    See message 11600
    "David R. Pina" <[email protected]> wrote:
    >
    Hello everyone,
    I'm using weblogic 6.0 for AIX.
    I'm trying to setup a new web application.
    Right now, I just want to access html files, but the web server is not working
    well.
    I can access the file
    http://myhost/myapp/index.html
    but if I try to access file2.html
    http://myhost/myapp/file2.html
    file2.html is in the same directory, with the same permissions and I get
    the 404
    error message
    At the beginning, I couldn't access index.html, because I created the directory
    "myapp"
    with user "root". Later, I changed the ownership to "wlowner" for "myapp"
    directory
    and for "index.html"
    Then I created "file2.html" with user "wlowner", and provided the same permissions
    as index.html but I can't access it.
    Could someone tell what might be wrong ?
    Any clues ?
    Thanks,
    David
    Mexico City

  • I keep getting result code -43 not found when trying to load certain instruments. Any idea why

    I keep getting error code -43 not found when trying to load certain instruments. Any ideas?

    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.

  • Keep getting Disc Burner or software not found when trying to burn a CD

    I am not able to burn a playlist to a CD and get an error at the top of Itunes window "Disc Burner or Software Not Found". I have been able to burn CDs in the past with this same computer but had some issues with songs in itunes. Support had me uninstall Itunes and reinstall. I have also uninstalled the device in the device manager and re-installed it. I really don't know what to try except to ask for help here. I would appreciate any direction I can get. I have a Dell desktop XPS running on Windows 8.

    Hi daurel, 
    Thanks for participating in the Apple Support Communities. 
    It sounds like you receive the error "Disc Burner or Software Not Found" when trying to burn CDs. You mention that you've already tried removing and reinstalling iTunes, and other drivers, and these are good steps. 
    If the situation continues, be sure to try the tips in this article:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install - Apple Support
    Sincerely,
    Jeremy 

  • HT1923 did anyone get the apple application support was not found when trying to instal?

    I am having trouble instaling itunes.  has anyone got the apple application support was not found when trying to instal itunes?  it looks like it is not installing all of files to my computer and it can not reach a certain folder

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Installed itunes update 10.5.0.142 and now get the error message "Disc Burner or Software Not Found" when trying to burn playlist to disc.

    Installed itunes update 10.5.0.142 and now get the error message "Disc Burner or Software Not Found" when trying to burn playlist to disc.  Windows 7

    Hello queenabs,
    It sounds like you are trying to burn a playlist to a disc in iTunes, but you are getting the error, "disc burner or software not found."  I found a couple of resources that I think might help with an error like this.
    I recommend starting with the steps in this article:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
    http://support.apple.com/kb/TS2308
    If you are still having trouble with burning a disc after following the steps in that article, I recommend following the steps in this article:
    iTunes for Windows: Additional troubleshooting tips for burning issues
    http://support.apple.com/kb/TS1374
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Why do I keep getting actionlist not found when trying to update to version 11.6.602.180?

    WHy do I keep getting actionlist not found when trying to update to update to version 11.6.602.180?

    This problem and others are outlined in this help document.  In addition, please try installing from the appropriate stand alone Windows installers located here:
    Installation Problems - Flash Player - Windows

  • It says "request resource not found" when trying to restore my iphone 4s

    it says "request resource not found" when trying to restore my iphone 4s

    This article is for iPhones that are unable to be restored.
    You may have to try recovery mode (as described below) more than once.
    http://support.apple.com/kb/HT1808

  • HTTP-404 Not Found when pressing  tab

    Hi All,
    I have three tabs namely Search,Create,Report
    1. When i press the "Create" tab it goes to the corresponding page, but after that
    when i press the other two tabs it is displaying an error
    HTTP-404 Not Found.
    in FF the error is
    The requested URL /pls/htmldb/wwv_flow.accept was not found on this server.
    Oracle-HTTP-Server/1.3.28 Server at APEX3 Port 80
    2. This error is displayed,
    after pressing "Create" tab, when i try to press other tags.
    3. but,First if i press any of the other two tabs, it is working fine
    Does any one exp. this kind of problem? All solutions appreciated.
    Thanks in advance
    bye
    Srikavi

    Hi Dimitri,
    I found out the error.
    I have a text field P7_TANKAGE and in the Post Element Text
    I entered.
    <span style="color:#ff0000;font-size:12px;"> <select id="unit1" onchange="YrthruputUnit();" tabindex="14.5">
    <option> -S-</option>
    <option value="ml"> ml</option>
    <option value="kg"> kg </option>
    <option value="ton"> ton </option>
    <option value="ltrs"> ltrs </option>
    </select> Units
    </span>
    This was working fine for that page but when i tried to move the tab or click the create button it was giving the error.
    When i removed that code from Post Element Text
    It works fine.
    one question: Is it not possible to write the code like that in apex?
    bye
    Srikavi

  • Error 404 -- NOT FOUND when running a form in form 11g

    Hi All,
    I got this problem when I run the forms using internet explorer.
    I work on Forms 11g which uses weblogic 10.3 for web deployment of the forms.
    Error 404--Not Found
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.4.5 404 Not Found
    The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
    If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
    Can any one tell me where it went wrong.
    Thanks

    Let's start by clearing up some confusion.
    PORTS
    In version 11.1.1.x here are how the common ports are defined by default:
    1. HTTP Server - 8888
    2. WLS_FORMS - 9001
    3. WLS_REPORTS - 9002
    4. WLS Admin Server - 7001
    So, if you understand how ports work in general, you should see that there are two ways to run a form. You can either go through HTTP Server or call WLS_FORMS directly. This means that both of the following would work, although one would be a direct path and the other would route the request through the HTTP Server:
    <li>http://ie1fdtfc5zl1s:9001/forms/frmservlet?config=frmdemo
    <li>http://ie1fdtfc5zl1s:8888/forms/frmservlet?config=frmdemo
    Port 7001, will always be the Admin Server port by default for the Classic domain. By default, the only thing you can do from here is access EM or WLS Console.
    As for the tns issue, by default, both the Builder and runtime will expect to find tnsnames.ora in the Instance Home \config so be sure you are adding the correct entries to the correct file.
    You can hard code a path to the file which you prefer be used by setting TNS_ADMIN in default.env (e.g. TNS_ADMIN=C:\Oracle\mytnsdirectory). This will apply only to running forms and not the Builder.
    Also, here is something which often is confusing to many people.... just because you launched your form from the Builder does not mean that the running form has anything to do with the Builder at that point. In other words, when you click on the RunForm button in the builder all you are doing is passing a url to a browser. The browser and the form are not using any of the Builder's settings except those which may have been passed in the URL (e.g. username/password). ALL running forms are considered "runtime". This means all of the environment configuration information for a running form will need to be set in default.env. The Builder, on the other hand will rely on the System variable, Windows Registry (or shell if on Unix).

  • Error 404: SRVE0190E: File not found when trying to access jsp

    I am using RAD (new to web dev) for some reason my app is unable to find .jsp's when they are not in the web content folder. I have a predefined package for my jsp's and when I run my servlet I get
    Error 404: SRVE0190E: File not found: /WEB-INF/classes/app/view/search.jsp
    now if I amend my URL in the servlet to "/search.jsp" and move the jsp to the web content folder, it works. I just don't understand why it cannot find the file when I put it in the package I created and link to it, but finds it just fine in the webcontent folder. Is there some unwritten rule JSP's MUST be in the webcontent folder? Because when i do that, then I have issues with my image links for the GUI (get red X's for all my images regardless of the fact they are linked properly.) Basically if I put my jsps where I want, look fine in design and preview, but the jsp isnt found when executed, if I move them to the web content folder the images no longer work but the jsps run. I am getting rather frustrated. Any help is appreciated.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    See also:
    *https://support.mozilla.org/kb/Clear+Recent+History
    Are you using cleanup software like CCleaner or other software that may corrupt the cache?
    You can try to delete the entire cache folder.<br />
    You can find the location of the cache folder on the about:cache page (open via the location bar, like a web page).
    You can check the <b>browser.cache.disk.enable</b> pref on the <b>about:config</b> page to verify that the disk cache is enabled (should be true).

  • Why HTTP 404 Page not Found when trying to Backup Configuration?

    Good day:
    I bought this RV082 VPN Router.  After configuring it, I tried to save its configuration using the System Management's Backup Utility.  When I set everything up and ready to proceed, as I click on the Backup Configuration button, I get this Page Not Found error.
    After several additional retries, and cold startup of my laptop, I still get this.
    Then I wondered, "Why don't I try to upgrade the firmware instead?".
    Guess what: I get the same page not found error.
    Can anyone tell why is this?  Using Windows 7 Pro 32-bit.
    Thanks in advance!
    Javier.
    P.S. I have replied to another thread about not getting connected with Quick VPN to the RV082, which is another painful trouble I've got with it.

    Hi Rybak,  
    Thanks for your reply.
    Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
    Clean the Cache folder on Server machine. The folder path is:
    C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.  
    After cleaned, on Server machine, click Start and select
    Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
    If clean Cache cannot resolve this issue, please try to repair your TFS 2013 Update 4 Server, then check the result.
    Additionally, you can run TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for

  • Why does the Measurement Studio C Tutorial require a SHSQL.DLL?

    Running the Measurement Studio C++ Tutorial the first time, I get a "requires SHSQL.DLL" error message on execution. I'm under NT 4.0, SP6. Visual Studio 6, SP5. Looking at the Microsoft site, they say SHSQL.DLL is a symbol handler for SQL. Why would

  • Sript pdf mail

    How to convert SAP script to pdf format and send mail?  What do we need to do in print program and configuration we need to achive? Thanks

  • BB Curve 8330 and Mac Mail on Browser/Internet

    Hi there, I wanted to access my MobileMe Mac mail using the BB browser.  I received an error message telling to me enable Java which I then did.  Still not able to access the website, www.me.com, keep getting error message.  I then went into the sett

  • Images not being Observed

    I've a simple applet class, a sample from a book. One line is this: g2d.drawImage(image, AffineTransform.getTranslateInstance(random.nextInt()%getSize().getWidth(), random.nextInt()%getSize().getHeight()), this); However, it doesn't accept my applet'

  • Every time I click on Home Icon Firefox tries to put tabs up for every page I hve been on for weeks

    When I start Firefox it loads only the last tabs I had when closing. BUT if I then hit the home icon it fills the tab bar with pages I was on weeks and weeks before, I dont seem to find a way to stop it.'''bold text'''