4500x does not have "switch" command

I'm attempting to setup VSS pair on 4500x. 1 of the 2 switches appear to missing some commands:
On my Switch 1 this is the code:
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.03.02.SG RELEASE SOFTWARE (fc1)
Directory of bootflash:/
31682 -rw-   112660260 Dec 13 2013 15:52:45 +00:00 cat4500e-universal.SPA.03.03.02.SG.151-1.SG2.bin
On Switch 2 that appears to be running fine is running:
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.04.02.SG RELEASE SOFTWARE (fc1)
CR-CYL-DC-SWC-02#dir bootflash:
Directory of bootflash:/
158402 -rw-   121703744 Nov 25 2013 02:56:07 +00:00 cat4500e-universal.SPA.03.04.02.SG.151-2.SG2.bin
On Switch 1 when i attemp to create VSS, I get the following:sw
Switch(config)#switch ?
% Unrecognized command
Switch(config)#switch
is this switch set in a particular mode that's preventing or do i have a bad code loading.. ? please advise..
Thanks

After taking a look at the current IOS on the switch I do not see VSS mentioned in the release notes. You may need to move up to a newer IOS version to solve this issue. The very next IOS 3.4.4SG seems to support VSS.
http://software.cisco.com/download/release.html?mdfid=283904596&softwareid=282046477&release=3.3.2SG

Similar Messages

"Server either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error driving me nuts!

OK; have been trying to setup a test VM based RDS deployment for a few days now with no luck.
this error mentioned above:
"Server <server name> either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error is driving me nuts!
I have removed and re-added the RD Virtualization Host role numerous times, each time having the "create a virtual switch" checkbox selected, but it did NOT create any virtual switch.
I created the external virtual switch manually and tried to create the desktop collection again, no luck with the same error.
a few questions:
1. you don't assign IP to a switch! you assign IP to Network Interfaces. why does the error puts it like this?! it is technically wrong.(yeah yeah I know all about how you'd assign IP to managed switches in real world to telnet into them and manage them.
you know better than me that it is not the case here!)
2.the RDS Virtualization hosts are using their wifi card as the card for the virtual switch. could that be the reason? I even disabled their unplugged wired NIC just to make sure that the wifi is the only available option for the RDS wizard to use for the
virtual switch creation; but it didn't use it and it didn't create any virtual switch automatically.
3.if WIFI nic is indeed the reason, is it your suspension or an official documents is there somewhere stating so (that the WIFI NICS on a Virtualization hosts are not supported as the hub for a virtual switch).
4.what are the properties of the virtual switch the RDS requires? does it have to be external? why can't it work even with my manually created external switch?
5.how would I fix it?
P.S: the environment is made up of 2 laptops, having windows 2012 R2 trial installed on them, using their wifi to connect to the out world. no cable is plugged into their wired NIC card.

Hi,
Thank you for posting in Windows Server Forum.
The simplest short term solution was to connect each computer to a small switch that had no other connectivity. This brought up the link light on the external NIC and allowed the creation of the collection to complete. You need to use an external switch. You
can create one external switch which might fix the problem.
Please check below article for information.
VDI Deployment Error About Virtual Switch
In addition please referthis article for information regarding virtual switch.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

I have Adobe Acrobat XI (ver 11.0.07). Adobe Help instructs me to find the document comparison command at "View Compare Documents," however, this command does exist on my screen. My View drop-down list does not include a command for Compare Documents.

I have Adobe Acrobat XI (ver 11.0.07). Adobe Help instructs me to find the document comparison command at "View > Compare Documents," however, this command does exist on my screen. My View drop-down list does not include a command for Compare Documents. Where else can I find this command?

What version of Acrobat do you have? This feature is only available in the Pro version, not in the Standard version.

[BUG] Adobe Bridge does not support OSX 10.10's "Go Back" keyboard shortcut and does not have a custom one.

Adobe Bridge does not support OSX 10.10's "Go Back" keyboard shortcut which is `command + shift + [` and does not have a custom one.
I tried "delete" key which is backspace for Windows. It will do delete identical to "delete X" key (which is delete key for Windows).
Sidenote: `command + shift + \` is to go back in views (switch views), not folder structure.

Exactly where do you want to use a GO BACK "shortcut" in Bridge? Maybe I don't even understand what you mean by Go Back. Bridge is only a file browser, nothing more. It doesn't open, edit, manipulate or save files at all.
Are you simply referring to going back to view a folder that you viewed before?
Please don't take this a criticism. As someone who will gladly pay money not to have to learn any shortcuts at all, I'm just puzzled and curious, that's all.

Getting this error while opening a folder : This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel

Hi,
While trying to open a folder on my Windows 7 Home Premium, an error comes "This file does not have a program associated with it for performing this
action. Please install a program or, if one is already installed, create an association in the Default Programs control panel." I tried searching on the net but did not get great support for the issue when it happens with folder opening.

Hi Nikunj Shah,
First, I suggest you download
Microsoft Safety Scanner or
Malicious Software Removal Tool to run a full scan.
The error messages here seems to be caused by the corrupted registries, which related with the folder association.
You may take a try to merge the following registry settings to reset the folder association, before that, remember to backup your registry settings first:
How to back up and restore the registry in Windows
Copy and paste the following commands into Notepad, and save it to a .reg file:
=================
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Folder]
"ContentViewModeLayoutPatternForBrowse"="delta"
"ContentViewModeForBrowse"="prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified"
"ContentViewModeLayoutPatternForSearch"="alpha"
"ContentViewModeForSearch"="prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay"
@="Folder"
"EditFlags"=hex:d2,03,00,00
"FullDetails"="prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size"
"NoRecentDocs"=""
"ThumbnailCutoff"=dword:00000000
"TileInfo"="prop:System.Title;System.ItemTypeText"
[HKEY_CLASSES_ROOT\Folder\DefaultIcon]
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,\
65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\explore]
"MultiSelectModel"="Document"
"ProgrammaticAccessOnly"=""
"LaunchExplorerFlags"=dword:00000018
[HKEY_CLASSES_ROOT\Folder\shell\explore\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\open]
"MultiSelectModel"="Document"
[HKEY_CLASSES_ROOT\Folder\shell\open\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00,2e,00,65,00,78,00,\
65,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess]
"MUIVerb"="@shell32.dll,-8518"
"MultiSelectModel"="Document"
"Extended"=""
"LaunchExplorerFlags"=dword:00000003
"ExplorerHost"="{ceff45ee-c862-41de-aee2-a022c81eda92}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow]
"MUIVerb"="@shell32.dll,-8517"
"MultiSelectModel"="Document"
"OnlyInBrowserWindow"=""
"LaunchExplorerFlags"=dword:00000001
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\BriefcaseMenu]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Library Location]
@="{3dad6c5d-2167-4cae-9914-f99e41c12cfa}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Offline Files]
@="{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000}]
@=""
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\BriefcasePage]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\Offline Files]
@="{7EFA68C6-086B-43e1-A2D2-55A113531240}"
[-HKEY_CLASSES_ROOT\Folder\ShellNew]
[HKEY_CLASSES_ROOT\Folder\ShellNew]
"Directory"=""
"IconPath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,\
00,00
"ItemName"="@shell32.dll,-30396"
"MenuText"="@shell32.dll,-30317"
"NonLFNFileSpec"="@shell32.dll,-30319"
[HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
"AllDrives"=""
"IsFolder"=""
"NoExtension"=""
==================
Once done, right-click the REG file and choose Merge. Alternately, you can open the Registry Editor and then using the
Import option from the File menu, to merge the REG file contents.
Let me know if you need any further help.
Best regards
Michael Shao
TechNet Community Support

Asking the Bridge Team: Bridge "working color space" setting when one does not have the Suite?

Common sense tells me there is really no such thing as a
"working color space" in Bridge, because
Bridge is not an image editor, just a browser
Therefore, this may turn out to be a purely academic question; but that doesn't keep my curiosity from forcing me to ask it anyway. ;)
Is there a way to set the Bridge
"color settings" when one does not have the suite?
The only Adobe program I keep up to date is Photoshop, so I've never had the suite. My version of Photoshop is 11 (CS4) and I run updated
(not upgraded) versions of Adobe Acrobat 7.x, Illustrator 10.x and InDesign 2.x. Consequently, the Synchronize color settings command is not available to me.
It seems to me that Bridge is behaving like a proper color-managed browser (e.g. Firefox with color management enabled), in that it displays tagged image files correctly and assumes sRGB for untagged image files. This normally works fine.
But what if I wanted Bridge to assume my
Photoshop color working space for untagged images
so that it behaves the same as Photoshop? I'm just curious, as I deal with a minuscule, practically negligible amount of untagged files.
My reason for bringing it up now is that I don't recall this being explicitly mentioned in forum replies when users inquire about color settings in Bridge. A recent post regarding Version Cue in the Photoshop Macintosh forum got me thinking about this. Just wanting to make sure that I'm right in my assumption that
there is really no such thing as a
"working color space" in Bridge, because Bridge is not an image editor, just a browser.
Thanks in advance.

Hi Ramón,
Thanks for sharing the outcome of your tests. However, I may have found a bug/exception to Bridge's colour management policy!
It appears that CMYK EPS photoshop files are not colour managed in Adobe Bridge, even if they contain an embedded ICC profile.
I've tried every combination in the EPS 'Save As' dialogue box, so it doesn't seem to be an issue with file encoding. Also, Bridge doesn't rely on the low-res preview that is held within the EPS itself.
My guess is that Bridge is previewing the CMYK EPS with a Bridge-generated RGB image, but it's being displayed as monitor RGB (assigned) rather than colour managed (converted to monitor RGB). For most users the difference will be barely perceptible, but the problem became very noticeable when using Bridge to preview Newsprint CMYK images on a wide-gamut monitor (images that should have appeared muted really leapt off the screen!).
How do I report this to the Colour Police at Adobe?!?

Client does not have permission to send as this sender

We have a CRM web application hosted on a server. When a user launches the site, the site provides facility to the customer to send the query into the system using the email. The website provides the filed for the customer to enter customer’s email ID. The
customer email address is used by the system to send the response back.
We are doing a new implementation for SMTP authentication for the emails send into the contact center using a public website. The flow of the system to use the SMTP authentication is:
Customer launches the website.
Customer chooses to send the his/her query using the email from the website.
Website asks for the customer’s address, so that the query can be
answered back to the provided email address say [email protected] .
We have an account configured on the MS-Exchange 2010 say [email protected]
So before sending the email the website system performs the SMTP Authentication using the credentials of [email protected]
Now the system creates the email MIME using the email address provided by the customer on the website i.e. say [email protected].
After successful SMTP authentication for the address [email protected] system starts sending the email.
Here we are facing the issue:
While sending the email if the customer’s address is also configured on the same exchange used by the system i.e. exchange on [email protected] is configured
then website system is able to relay or send the email.
If the customer’s address is not configured on the same exchange used by the system where [email protected] is configured then the system is not able to send the email it results into the error of: “Client
does not have permission to send as this sender [email protected].
In short if the website performs the SMTP authentication then it requires the FROM address configured on the same exchange used for the smtp authentication in the email MIME from address.
Configuration tries:
As suggested on various forums and at Microsoft tech group we tried following things but no success:
Checked the checkbox “Authenticated Users” selected “Accept any Sender”.
Created a new relay and given the IP of the machine hosting the website or trying to send the email
Run the command from the EMC “Exchange management console”
Add-AdPermission -Identity "Default Receive Connector" -User "NT AUTHORITY\Authenticated Users" -ExtendedRights ms-Exch-SMTP-Accept-Any-Sender.

You can create a new connector to which everything is permitted - eg New-ReceiveConnector -Name "Anonymous Relay" -Usage Custom -PermissionGroups AnonymousUsers -Bindings 10.2.3.4:25 -RemoteIpRanges 192.168.5.77

Terminal server does not have any installed licenses

Good morning! Faced with a some trouble while configuring Terminal Server (Windows Server 2012 based). I selected licensing mode "Per User" and now I see this message:
“The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode, but license server “server name” does not have any installed licenses with the following attributes:
Product version: Windows Server 2008 or Windows Server 2008 R2
Licensing mode: Per User
License type: RDS CALs”
So this is trial using of terminal server - I have 25 days yet but already today I can't connect to server using RDP. There is an error message about absent licensing server. How can I activate licenses in trial mode? Thank you for support.

Hi,
Thank you for posting in Windows Server Forum.
From the error description it seems that your issue caused by setting up different Licensing mode. We need to install the proper RDS CAL on the License server. If the license server has installed licenses of the other mode, changing the licensing mode
for the terminal server may also resolve the issue.
To change the Licensing mode we can use RD Licensing diagnoser or by PowerShell command.
To change the licensing mode on RDSH/RDVH:
$obj = gwmi -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
$obj.ChangeMode(value) - Value can be 2 - per Device, 4 - Per user
Please refer below article for information.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Have you installed License server on Server 2012 and you have RDS CAL of Server 2008 R2?
If that’s the case then first you need to purchase the RDS CAL for server 2012 and then you can configure on server 2012 because server 2012\R2 RDS CAL can work with lower version OS but Server 2008 R2 RDS CAL can’t work on Server 2012\R2.
Please check computability matrix.
RDS and TS CAL Interoperability Matrix
http://social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

My iphone does not automatically switch off the display light when locked. How do I fix this?

I have an iPhone 5 with iOS 8.2 software.
My iPhone does not automatically switch off the display light when it is locked. Therefore, if I get an e-mail/text message/pop-up from other application, the light just stays on, which obviously drains my battery.
The problem just started yesterday, and it has been a couple of days since I updated the software, so I wouldn't think the software update is the problem.
I have tried restarting the phone (using home and lock button), but that did not work.
Something else that seems weird is that once in a while, a blue beam rolls over the screen from one side to the other. I don't know why it does this, and have no idea whether this is related to the display light issue.
I hope someone is able to help by telling me what to do in order to get my phone to act normal again.
Thank you x

Restart your device by holding the home and power button until the Apple logo appears. You will not lose any data.

Since I have Yosemite on my iMac I can't view PDF files in Safari anymore. It keeps telling me to upgrade my Adobe Reader, but it is the latest version. Please help? I don't have this problem on my Macbook that does not have Yosemite installed.

Since I have Yosemite on my iMac I can't view PDF files in Safari anymore. It keeps telling me to upgrade my Adobe Reader, but it is the latest version. Please help? I don't have this problem on my Macbook that does not have Yosemite installed.

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
          Safari ▹ Preferences... ▹ Security
and check the box marked
          Allow Plug-ins
Then click
          Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
          Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

My Bridge Tools menu does not have Photoshop submenu

Hi,
In Bridge CS3, I just noticed that the Tools menu does not have a Photoshop submenu and therefore I cannot apply Batch commands - among other things.
I have the latest version (2.1.1.9) in MAC OS X Leopard. What is going on?
I have a friend that has the same program in Windows Vista and has the Photoshop submenu...
Please help!
Juan Dent

Check your preference folder start up scripts. Inhere the startup script should have a checkmark on it. if not put in on and after restart the script should be there.
Otherwise try a refresh preferences holding down the option key when restarting bridge.

HH2 bt infinity and windows 8 Wifi does not have a...

Hello I bought windows 8 in January and upgraded an old Dell xps m1730 laptop, however after 4 or 5 months the laptop lost all it's wireless connection to the HH. I rang Bt help and eventually was told that it was a fault with my Laptop, after playing around with ip settings I eventually got the laptop to connect by using a static ip address in my list of IP's. Yesterday I bought a brand new laptop for my daughter, an HP Envy M6 i5, and during the setup process I entered my wireless details, and I could not believe it,there was the same message Wifi does not have a valid wifi configuration, i tried using ip config renew, flush, switched off the firewall,switched of the HomeHub and the Openreach boxes to no avail, i have now setup this pc using a static ip address. As like most people these days i have a lot of wifi devices in the house, including 3 Macbook's, iphone's,blackberry's, also a windows 7 pc, everything connects flawlessly, Just not Windows 8, Can you prompt me in the right direction to fix this problem?

That's a pity! I was going to suggest using the Windows connection rather than the HP one to see if it connected without problem.
I don't think there is a general problem with Windows 8 not connecting to Infinity otherwise I'm sure there would be more posts about it on this forum.
I usually suggest a factory reset of the homehub by pressing a pin into the red recess button for about 20 seconds to sort out configuration settings on the Hub but if you were to do this you would need to set up your fixed IP address again if it didn't sort the problem. It might be worth a try if you can be bothered.
Other than that I can't think what else to try for the moment.

"The Finder does not have enough memory available"

"The Finder does not have enough memory available"
Situation: G4 (AGP Graphics), OS 9.0 with tons of memory.
Problem: Only with any browser viz Explorer, Communicator, iCab or Opera (all versions). Starts off fine. I have broadband. Then steadily goes slower and slower till virtually stops even with just the one browser and one window and no other programs in use. Try to do anything else and above message appears. The problem seems to involves the operating system and the way it interacts with the code of certain sites eg Ebay. It has nothing to do with PRAM, or allocation of memory to the browser or deleting various Preferences. The deletion of Finder, Memory etc Preferences, quitting, restarting all deal with the symptoms and are not a permanent cure. The primary symptom is a massive loss of available memory, not even enough to run a single browser and one window! Any simple solutions? I realise I can upgrade to OS 9.2. Will this work? Apart from this browser problem I am happy with my present set so is there a simpler solution apart from upgrading?

Thankyou to all for the welcome and your responses to my query.
I have 640mb of RAM. The problem is intermitent and is determined to a great extent by the sites which I visit. Yahoo for example is great - no problems. In another window visiting eg Ebay will eventually (variable) cause a slowdown. I have switched Virtual Memory on and off, changed cache, program allocations of memory, regularly used Norton Utilies to inspect, repair, defrag etc and looked all over the place for advice. Things run great for a while but it is only a question of time , months or even days, before the problem re-appears. I was surprised to find so little about it on the Web. Perhaps everyone else has upgraded or is on OS X! If I could have done something without upgrading I may have gone for that option as everything else is running like a dream and I want to keep it that way! I use programs such as Paperport (sadly not made for OS X) which I find a marvellous scanning and paperwork management program. To get it to work with OS 9.0 I had to determine with Cassidy & Green's marvellous extension conflict identifier Conflict Catcher that the Control Strip needed disabling. If I upgrade, I could, for Paperport et al, upset the Apple cart! I have also read about a program called Reaper which was used to deal, I believe, with Finder memory problems with OS 7 and OS 8. It is still available on at http://www.versiontracker.com/dyn/moreinfo/macos/3783 Apart from this I know nothing more at present about it.
However, the following was one item which I found of great interest which goes along with your advice of upgrading.
From http://www.icab.de/faq.html#q36
"Mac OS 8/9: Why does iCab 3.0 complain that it is running out of memory all the time?
This is not a bug of iCab, it's a bug of the "classic" MacOS 8.5/8.6 (and maybe OS 9.0 as well). The problem occurs when a web page has web forms with text input fields. The Unicode text input fields (MLTE) of these old MacOS releases do still have some serious bugs. One of theses bugs causes the MacOS to reserve almost all available memory for these text edit fields so there's no memory left for iCab. Apple has fixed this bug in MacOS 9.2.x (maybe in 9.1 as well), so the best solution for this problem would be to upgrade the MacOS. If this is not possible, you can disable the Unicode text input fields in the preferences dialog of iCab in the panel "Operation > Browser, Tabs". Switch off the option "Use Unicode TextEdit" to configure iCab so that it will use the "ancient" text edit fields, which do work OK, but which do not support Unicode".
Here is someone with a similar problem back in 2000:
"From TacitRF
Date: Thurs, Jun 8 2000 12:00am
Email: [email protected] (TacitR)
Groups: comp.sys.mac.system
This is ridiculous! I have hardly touched this machine today. Does RAM get eaten up while the computer is sitting there idle (and sleeping every now and then after I've checked email or looked at a couple newsgroup posts)?
Yes, it can, under certain circumstances.
Open your TCP/IP control panel. Click the Options button. (If there is no Options button, select Edit->User Mode, and click "Advanced.") Is "Load Only When Needed" turned on? If it is, you may severly fragment the memory in your computer every time you start a program that uses the Internet. Let's say, for example, you launch Netscape. Netscape tries to access the Internet. This causes TCP/IP to load, on top of Netscape. Now, when you quit Netscape, the memory it was using may not get freed up. Launch Outlook. It loads TCP/IP. Now, when you quit Outlook, you may not get its memory back either". Try turning off Load Only When Needed in the TCP/IP Options, see if that solves
the problem. Hope that helps!"
I find that whatever I do one way or another the slowdown will eventually reappear. A bit like weeding gardens and washing dishes! Well unless there is a way of dealing with OS 9.0 memory behaviour with browsers it looks like an upgrade will have to do!
Mac OS 9.0.x

InvalidRecordException: Input record does not have a valid Id.

I am trying to export data from hybris to endeca. I have set up the index schema, index element, cas config, added properties.
I have added queries the index elements but somehow the recordstore are not exporting the data to endeca. When, I checked the recordstore for data, it returned an empty file. I have checked the record store config for data and it shows record.spec available. Not sure why I am getting the InvalidRecordException.
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<recordStoreConfiguration xmlns="http://recordstore.itl.endeca.com/">
<changePropertyNames/>
<idPropertyName>record.spec</idPropertyName>
<jdbmSettings/>
</recordStoreConfiguration>
ERROR [hyend2exportcronjob1360880300110::de.hybris.platform.servicelayer.internal.jalo.ServicelayerJob] (hyend2exportcronjob1360880300110) [EndecaRecordStoreService] Exception during writing records to record store
com.endeca.itl.recordstore.InvalidRecordException: Input record does not have a valid Id.
at org.apache.cxf.jaxws.JaxWsClientProxy.invoke(JaxWsClientProxy.java:141)
at $Proxy146.writeRecords(Unknown Source)
at com.endeca.itl.recordstore.RecordStoreWriter.doFlush(RecordStoreWriter.java:170)
at com.endeca.itl.recordstore.RecordStoreWriter.flush(RecordStoreWriter.java:145)
at com.endeca.itl.recordstore.RecordStoreWriter.close(RecordStoreWriter.java:163)
at de.hybris.platform.hyend2.services.endeca.impl.DefaultEndecaRecordStoreService.writeRecordsToRecordStore(DefaultEndecaRecordStoreService.java:125)
at de.hybris.platform.hyend2.services.endeca.impl.DefaultEndecaRecordStoreService.writeRecords(DefaultEndecaRecordStoreService.java:98)
at de.hybris.platform.hyend2.services.impl.DefaultExportService.exportSchema(DefaultExportService.java:456)
at de.hybris.platform.hyend2.services.impl.DefaultExportService.exportSchema(DefaultExportService.java:210)
at de.hybris.platform.hyend2.services.impl.DefaultExportService.export(DefaultExportService.java:121)
at de.hybris.platform.hyend2.jobs.ExportJob.perform(ExportJob.java:67)
at de.hybris.platform.hyend2.jobs.ExportJob.perform(ExportJob.java:1)
at de.hybris.platform.servicelayer.internal.jalo.ServicelayerJob.performCronJob(ServicelayerJob.java:40)
at de.hybris.platform.cronjob.jalo.Job.execute(Job.java:1294)
at de.hybris.platform.cronjob.jalo.Job.performImpl(Job.java:813)
at de.hybris.platform.cronjob.jalo.Job.access$1(Job.java:772)
at de.hybris.platform.cronjob.jalo.Job$JobRunable.run(Job.java:677)
at de.hybris.platform.util.threadpool.PoolableThread.run(PoolableThread.java:198)

This was due to the dropping of recordstores which were not getting recreated. Using environment parameters (host and port) on the command line to create the recordstore for data resolved the issue.

TS3274 My IPad does not have sound in the apps.

My IPad 2 does not have sound for the apps. I have checked everything . What should I do ?

There is a sound button located on the side near the on/off switch.

4500x does not have "switch" command

Similar Messages

Maybe you are looking for