4GB but only 266 songs!

every since i've updated my itunes to the current version i can only fit about 260 songs on my ipod mini when previously i could fit 1000. could someone please help me?! has this happened to anyone else?

Bear in mind that Apple quotes the number of songs you are able to store on any iPod by using the AAC format at a bitrate setting of 128kbps and for a 4 minute song.
Bear in mind that Apple quotes the number of songs you are able to store on any iPod by using the AAC format at a bitrate setting of 128kbps and for a 4 minute song.
Look in iTunes under edit/preferences/advanced/importing. What does it say in settings and import using? You may have the import settings and bitrate set wrong. You need to compress your music using either mp3 or aac. If you see AIFF, WAV or Apple Lossless then those formats are going to take way more space than mp3 or aac, especially the first 2 which are raw uncompressed formats.
See this.
<a href="<a href="http://docs.info.apple.com/article.html?artnum=60955">How much content will fit on my iPod?
Is it possible you have anything else stored on your iPod?
If you connect the iPod to iTunes what does the summary screen show?

Similar Messages

HT4914 I just subscribed to iTunes match but only 61 songs from my 7GB of music on my iphone showed up. I do not want to lose any music. What should i do?

I just subscribed to iTunes match but only 61 songs from my 7GB of music on my iphone showed up. I do not want to lose any music. What should i do? When I go to settings-music-and try to enable iTunes Match on my iPhone it says "iTunes Match will replace the music library on this device" I don't want to do that it only has 61 of my 7GB of songs.

did you find out the answer? I am afraid to hit enable.

HT5714 I pre order midnight memories/ one direction album but only 4 songs where downloaded and the rest say purchased. What can i do to download the rest?, it doesnt give me the option to download?

I preorder an album but only 4 songs where downloaded but the rest of the album is not it only says purchased, please help me resolve this matter!?

Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that track from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes.
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

HT204370 I purchased a movie that don't play & a cd but only 2 songs play

I purchased a movie that don't play & a cd but only 2 songs play

Depending upon what country that you are in (music and films can't be re-downloaded in all countries) then try deleting the incomplete music tracks and the film from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music and/or films or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that album and/or film and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, 24 to 48 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

Upgraded ram on arch64 to 4GB, but only 3Gb is recognized

I just added a 2Gb stick of ram to my work system and the bios recognizes all 4Gb but Arch only sees 3Gb. I've booted multiple live 64bit cd's and the problem persists accross all of them. I'm clueless as to what may be causing this. ANY help would be appreciated, if I can't get to use all 4 gigs, then a simple explanation would be helpful.
Here are some details I have from my system:
[root@archer ~]# uname -a
Linux archer 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010 x86_64 Intel(R) Pentium(R) D CPU 3.20GHz GenuineIntel GNU/Linux
[root@archer ~]# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Pentium(R) D CPU 3.20GHz
stepping : 4
cpu MHz : 3192.142
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts pni dtes64 monitor ds_cpl est cid cx16 xtpr
bogomips : 6386.29
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Pentium(R) D CPU 3.20GHz
stepping : 4
cpu MHz : 3192.142
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts pni dtes64 monitor ds_cpl est cid cx16 xtpr
bogomips : 6386.24
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:
[root@archer ~]# cat /proc/meminfo
MemTotal: 3086272 kB
MemFree: 1941808 kB
Buffers: 53976 kB
Cached: 448988 kB
SwapCached: 0 kB
Active: 659460 kB
Inactive: 314396 kB
Active(anon): 471048 kB
Inactive(anon): 192 kB
Active(file): 188412 kB
Inactive(file): 314204 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 2097148 kB
SwapFree: 2097148 kB
Dirty: 148 kB
Writeback: 0 kB
AnonPages: 470892 kB
Mapped: 140788 kB
Shmem: 348 kB
Slab: 59040 kB
SReclaimable: 43824 kB
SUnreclaim: 15216 kB
KernelStack: 2168 kB
PageTables: 23448 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 3640284 kB
Committed_AS: 1318836 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 135976 kB
VmallocChunk: 34359582204 kB
HardwareCorrupted: 0 kB
DirectMap4k: 54808 kB
DirectMap2M: 3088384 kB
[root@archer ~]# lshw
archer
description: Mini Tower Computer
product: OptiPlex GX620
vendor: Dell Inc.
serial: 41BRS81
width: 64 bits
capabilities: smbios-2.3 dmi-2.3 vsyscall64 vsyscall32
configuration: administrator_password=enabled boot=normal chassis=mini-tower power-on_password=enabled uuid=44454C4C-3100-1042-8052-B4C04F533831
*-core
description: Motherboard
product: 0F8098
vendor: Dell Inc.
physical id: 0
serial: ..CN1374059U02L0.
*-firmware
description: BIOS
vendor: Dell Inc.
physical id: 0
version: A11 (11/30/2006)
size: 64KiB
capacity: 448KiB
capabilities: pci pnp apm upgrade shadowing cdboot bootselect edd int13floppytoshiba int5printscreen int9keyboard int14serial int17printer acpi usb ls120boot biosbootspecification netboot
*-cpu
description: CPU
product: Intel(R) Pentium(R) D CPU 3.20GHz
vendor: Intel Corp.
physical id: 400
bus info: cpu@0
slot: Microprocessor
size: 3200MHz
capacity: 4GHz
width: 64 bits
clock: 800MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc pebs bts pni dtes64 monitor ds_cpl est cid cx16 xtpr
*-cache:0
description: L1 cache
physical id: 700
size: 16KiB
capacity: 16KiB
capabilities: internal write-back data
*-cache:1
description: L2 cache
physical id: 701
size: 2MiB
capacity: 2MiB
capabilities: internal varies unified
*-memory
description: System Memory
physical id: 1000
slot: System board or motherboard
size: 4GiB
*-bank:0
description: DIMM DDR Synchronous 533 MHz (1.9 ns)
product: 16HTF12864AY-53EB1
vendor: 2CFFFFFFFFFFFFFF
physical id: 0
serial: 699F8C6F
slot: DIMM_1
size: 1GiB
width: 64 bits
clock: 533MHz (1.9ns)
*-bank:1
description: DIMM DDR Synchronous 533 MHz (1.9 ns) [empty]
vendor: FFFFFFFFFFFFFFFF
physical id: 1
serial: FFFFFFFF
slot: DIMM_3
width: 64 bits
clock: 533MHz (1.9ns)
*-bank:2
description: DIMM DDR Synchronous 533 MHz (1.9 ns)
product: 16HTF12864AY-53EB1
vendor: 2CFFFFFFFFFFFFFF
physical id: 2
serial: 699F8C6D
slot: DIMM_2
size: 1GiB
width: 64 bits
clock: 533MHz (1.9ns)
*-bank:3
description: DIMM DDR Synchronous 533 MHz (1.9 ns)
vendor: 7F98000000000000
physical id: 3
serial: 0307853B
slot: DIMM_4
size: 2GiB
width: 64 bits
clock: 533MHz (1.9ns)
*-pci
description: Host bridge
product: 82945G/GZ/P/PL Memory Controller Hub
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 02
width: 32 bits
clock: 33MHz
configuration: driver=agpgart-intel
resources: irq:0
*-pci:0
description: PCI bridge
product: 82945G/GZ/P/PL PCI Express Root Port
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:24 ioport:c000(size=8192) memory:f6f00000-fe9fffff ioport:d0000000(size=536870912)
*-pci
description: PCI bridge
product: PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070
vendor: nVidia Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a3
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress normal_decode bus_master cap_list
resources: ioport:c000(size=8192) memory:f6f00000-fe9fffff ioport:d0000000(size=536870912)
*-pci:0
description: PCI bridge
product: PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070
vendor: nVidia Corporation
physical id: 0
bus info: pci@0000:02:00.0
version: a3
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress normal_decode bus_master cap_list
resources: ioport:d000(size=4096) memory:fa000000-fe9fffff ioport:d0000000(size=268435456)
*-display
description: VGA compatible controller
product: G98 [Quadro NVS 420]
vendor: nVidia Corporation
physical id: 0
bus info: pci@0000:03:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:16 memory:fd000000-fdffffff memory:d0000000-dfffffff memory:fa000000-fbffffff ioport:dc80(size=128) memory:fe900000-fe91ffff
*-pci:1
description: PCI bridge
product: PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070
vendor: nVidia Corporation
physical id: 2
bus info: pci@0000:02:02.0
version: a3
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress normal_decode bus_master cap_list
resources: ioport:c000(size=4096) memory:f6f00000-f9ffffff ioport:e0000000(size=268435456)
*-display
description: 3D controller
product: G98 [Quadro NVS 420]
vendor: nVidia Corporation
physical id: 0
bus info: pci@0000:04:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:18 memory:f7000000-f7ffffff memory:e0000000-efffffff memory:f8000000-f9ffffff ioport:cc80(size=128) memory:f6f00000-f6f1ffff
*-display:0 UNCLAIMED
description: Display controller
product: 82945G/GZ Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: msi pm cap_list
configuration: latency=0
resources: memory:feb00000-feb7ffff ioport:e898(size=8) memory:c0000000-cfffffff memory:feac0000-feafffff
*-display:1 UNCLAIMED
description: Display controller
product: 82945G/GZ Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: 02
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: latency=0
resources: memory:feb80000-febfffff
*-pci:1
description: PCI bridge
product: 82801G (ICH7 Family) PCI Express Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:25 ioport:1000(size=4096) memory:f6e00000-f6efffff ioport:f4000000(size=2097152)
*-network
description: Ethernet interface
product: NetXtreme BCM5751 Gigabit Ethernet PCI Express
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:05:00.0
logical name: eth0
version: 01
serial: 00:14:22:39:5d:0e
size: 100MB/s
capacity: 1GB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=off broadcast=yes driver=tg3 driverversion=3.108 duplex=full firmware=5751-v3.44a ip=69.179.206.39 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s
resources: irq:16 memory:f6ef0000-f6efffff
*-pci:2
description: PCI bridge
product: 82801G (ICH7 Family) PCI Express Port 2
vendor: Intel Corporation
physical id: 1c.1
bus info: pci@0000:00:1c.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:26 ioport:3000(size=4096) memory:f6d00000-f6dfffff ioport:f4200000(size=2097152)
*-usb:0
description: USB Controller
product: 82801G (ICH7 Family) USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:21 ioport:ff80(size=32)
*-usb:1
description: USB Controller
product: 82801G (ICH7 Family) USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:22 ioport:ff60(size=32)
*-usb:2
description: USB Controller
product: 82801G (ICH7 Family) USB UHCI Controller #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@0000:00:1d.2
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:18 ioport:ff40(size=32)
*-usb:3
description: USB Controller
product: 82801G (ICH7 Family) USB UHCI Controller #4
vendor: Intel Corporation
physical id: 1d.3
bus info: pci@0000:00:1d.3
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:23 ioport:ff20(size=32)
*-usb:4
description: USB Controller
product: 82801G (ICH7 Family) USB2 EHCI Controller
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 01
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0
resources: irq:21 memory:ffa80800-ffa80bff
*-pci:3
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: e1
width: 32 bits
clock: 33MHz
capabilities: pci subtractive_decode bus_master cap_list
*-multimedia
description: Multimedia audio controller
product: 82801G (ICH7 Family) AC'97 Audio Controller
vendor: Intel Corporation
physical id: 1e.2
bus info: pci@0000:00:1e.2
version: 01
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=Intel ICH latency=0
resources: irq:23 ioport:ec00(size=256) ioport:e8c0(size=64) memory:feabfa00-feabfbff memory:feabf900-feabf9ff
*-isa
description: ISA bridge
product: 82801GB/GR (ICH7 Family) LPC Interface Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: latency=0
*-ide:0
description: IDE interface
product: 82801G (ICH7 Family) IDE Controller
vendor: Intel Corporation
physical id: 1f.1
bus info: pci@0000:00:1f.1
logical name: scsi0
version: 01
width: 32 bits
clock: 33MHz
capabilities: ide bus_master emulated
configuration: driver=ata_piix latency=0
resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ffa0(size=16)
*-cdrom:0
description: DVD reader
product: DVD-ROM TS-H352C
vendor: TSSTcorp
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/cdrom
logical name: /dev/cdrom0
logical name: /dev/dvd
logical name: /dev/dvd0
logical name: /dev/scd0
logical name: /dev/sr0
version: DE02
capabilities: removable audio dvd
configuration: ansiversion=5 status=nodisc
*-cdrom:1
description: DVD writer
product: DVD+-RW DVD8701
vendor: PHILIPS
physical id: 0.1.0
bus info: scsi@0:0.1.0
logical name: /dev/cdrom1
logical name: /dev/cdrw
logical name: /dev/cdrw0
logical name: /dev/dvd1
logical name: /dev/dvdrw
logical name: /dev/dvdrw0
logical name: /dev/scd1
logical name: /dev/sr1
version: 5D24
capabilities: removable audio cd-r cd-rw dvd dvd-r
configuration: ansiversion=5 status=nodisc
*-ide:1
description: IDE interface
product: 82801GB/GR/GH (ICH7 Family) SATA IDE Controller
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
logical name: scsi2
version: 01
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list emulated
configuration: driver=ata_piix latency=0
resources: irq:20 ioport:fe00(size=8) ioport:fe10(size=4) ioport:fe20(size=8) ioport:fe30(size=4) ioport:fea0(size=16)
*-disk
description: ATA Disk
product: ST3160023AS
vendor: Seagate
physical id: 0.0.0
bus info: scsi@2:0.0.0
logical name: /dev/sda
version: 8.12
serial: 5MT2WH76
size: 149GiB (160GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=00000081
*-volume:0
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@2:0.0.0,1
logical name: /dev/sda1
logical name: /boot
version: 1.0
serial: 114f8e0f-923f-41a6-a48c-0a0d626d912b
size: 109MiB
capacity: 109MiB
capabilities: primary bootable journaled extended_attributes ext3 ext2 initialized
configuration: created=2009-08-21 12:35:42 filesystem=ext3 modified=2010-08-18 15:29:33 mount.fstype=ext3 mount.options=rw,relatime,errors=continue,data=writeback mounted=2010-08-18 15:19:26 state=mounted
*-volume:1
description: Linux LVM Physical Volume partition
physical id: 2
bus info: scsi@2:0.0.0,2
logical name: /dev/sda2
serial: kKDXzU-NAhM-SKCH-GK0P-m0Pf-mOCD-efCerO
size: 148GiB
capacity: 148GiB
capabilities: primary multi lvm2
*-serial
description: SMBus
product: 82801G (ICH7 Family) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 01
width: 32 bits
clock: 33MHz
configuration: driver=i801_smbus latency=0
resources: irq:17 ioport:e8a0(size=32)
[root@archer ~]# dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.34-ARCH (tobias@T-POWA-LX) (gcc version 4.5.0 20100610 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010
Command line: root=/dev/mapper/vg0-root ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfd86c00 (usable)
BIOS-e820: 00000000bfd86c00 - 00000000bfd88c00 (ACPI NVS)
BIOS-e820: 00000000bfd88c00 - 00000000bfd8ac00 (ACPI data)
BIOS-e820: 00000000bfd8ac00 - 00000000c0000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.3 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0xbfd86 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BFF00000 mask FFFF00000 uncachable
3 base 0BFE00000 mask FFFF00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 00000000000a0000 (usable)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bfd86c00 (usable)
modified: 00000000bfd86c00 - 00000000bfd88c00 (ACPI NVS)
modified: 00000000bfd88c00 - 00000000bfd8ac00 (ACPI data)
modified: 00000000bfd8ac00 - 00000000c0000000 (reserved)
modified: 00000000f0000000 - 00000000f4000000 (reserved)
modified: 00000000fec00000 - 00000000fed00400 (reserved)
modified: 00000000fed20000 - 00000000feda0000 (reserved)
modified: 00000000fee00000 - 00000000fef00000 (reserved)
modified: 00000000ffb00000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fe710] fe710
init_memory_mapping: 0000000000000000-00000000bfd86000
0000000000 - 00bfc00000 page 2M
00bfc00000 - 00bfd86000 page 4k
kernel direct mapping tables up to bfd86000 @ 16000-1b000
RAMDISK: 37da4000 - 37ff0000
ACPI: RSDP 00000000000feb00 00024 (v02 DELL )
ACPI: XSDT 00000000000fd257 00074 (v01 DELL GX620 00000007 ASL 00000061)
ACPI: FACP 00000000000fd34f 000F4 (v03 DELL GX620 00000007 ASL 00000061)
ACPI: DSDT 00000000fffd4952 03DA4 (v01 DELL dt_ex 00001000 INTL 20050309)
ACPI: FACS 00000000bfd86c00 00040
ACPI: SSDT 00000000fffd8815 000AA (v01 DELL st_ex 00001000 INTL 20050309)
ACPI: APIC 00000000000fd443 00072 (v01 DELL GX620 00000007 ASL 00000061)
ACPI: BOOT 00000000000fd4b5 00028 (v01 DELL GX620 00000007 ASL 00000061)
ACPI: ASF! 00000000000fd4dd 00067 (v16 DELL GX620 00000007 ASL 00000061)
ACPI: MCFG 00000000000fd544 0003E (v01 DELL GX620 00000007 ASL 00000061)
ACPI: HPET 00000000000fd582 00038 (v01 DELL GX620 00000007 ASL 00000061)
ACPI: SSDT 00000000bfd86c40 00175 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050309)
ACPI: SSDT 00000000bfd87049 00175 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050309)
ACPI: SSDT 00000000bfd87452 00140 (v01 DpgPmm CpuPm 00000010 INTL 20050309)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00029fffff] PMD -> [ffff880002000000-ffff8800049fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x000000a0
0: 0x00000100 -> 0x000bfd86
On node 0 totalpages: 785686
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3928 pages, LIFO batch:0
DMA32 zone: 10688 pages used for memmap
DMA32 zone: 771014 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
early_res array is doubled to 64 at [19180 - 1997f]
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88232 r8192 d22360 u524288
pcpu-alloc: s88232 r8192 d22360 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 774942
Kernel command line: root=/dev/mapper/vg0-root ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (51 early reservations)
#1 [0001000000 - 00016e1178] TEXT DATA BSS
#2 [0037da4000 - 0037ff0000] RAMDISK
#3 [00016e2000 - 00016e21cc] BRK
#4 [00000fe720 - 0000100000] BIOS reserved
#5 [00000fe710 - 00000fe720] MP-table mpf
#6 [000009fc00 - 00000f0000] BIOS reserved
#7 [00000f029c - 00000fe710] BIOS reserved
#8 [00000f0000 - 00000f029c] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000016000] ACPI WAKEUP
#11 [0000016000 - 0000019000] PGTABLE
#12 [00016e2200 - 00016e3200] BOOTMEM
#13 [0000019000 - 0000019180] BOOTMEM
#14 [0001ee4000 - 0001ee5000] BOOTMEM
#15 [0001ee5000 - 0001ee6000] BOOTMEM
#16 [0002000000 - 0004a00000] MEMMAP 0
#17 [00016e3200 - 00016fb200] BOOTMEM
#18 [00016fb200 - 0001713200] BOOTMEM
#19 [0001714000 - 0001715000] BOOTMEM
#20 [00016e1180 - 00016e11c1] BOOTMEM
#21 [00016e1200 - 00016e1243] BOOTMEM
#22 [00016e1280 - 00016e1520] BOOTMEM
#23 [00016e1540 - 00016e15a8] BOOTMEM
#24 [00016e15c0 - 00016e1628] BOOTMEM
#25 [00016e1640 - 00016e16a8] BOOTMEM
#26 [00016e16c0 - 00016e1728] BOOTMEM
#27 [00016e1740 - 00016e17a8] BOOTMEM
#28 [00016e17c0 - 00016e1828] BOOTMEM
#29 [00016e1840 - 00016e18a8] BOOTMEM
#30 [00016e18c0 - 00016e1928] BOOTMEM
#31 [00016e1940 - 00016e19a8] BOOTMEM
#32 [00016e19c0 - 00016e1a28] BOOTMEM
#33 [00016e1a40 - 00016e1aa8] BOOTMEM
#34 [00016e1ac0 - 00016e1ae0] BOOTMEM
#35 [00016e1b00 - 00016e1b1d] BOOTMEM
#36 [00016e1b40 - 00016e1b5d] BOOTMEM
#37 [0001800000 - 000181d000] BOOTMEM
#38 [0001880000 - 000189d000] BOOTMEM
#39 [0001900000 - 000191d000] BOOTMEM
#40 [0001980000 - 000199d000] BOOTMEM
#41 [00016e1b80 - 00016e1b88] BOOTMEM
#42 [00016e1bc0 - 00016e1bc8] BOOTMEM
#43 [00016e1c00 - 00016e1c10] BOOTMEM
#44 [00016e1c40 - 00016e1c60] BOOTMEM
#45 [00016e1c80 - 00016e1db0] BOOTMEM
#46 [00016e1dc0 - 00016e1e10] BOOTMEM
#47 [00016e1e40 - 00016e1e90] BOOTMEM
#48 [0001715000 - 000171d000] BOOTMEM
#49 [000199d000 - 0001d9d000] BOOTMEM
#50 [0004a00000 - 0004c00000] BOOTMEM
Memory: 3083440k/3143192k available (3484k kernel code, 448k absent, 59304k reserved, 1796k data, 480k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:768
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 31457280 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3192.142 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.29 BogoMIPS (lpj=10640473)
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: no PMU driver, software events only.
ACPI: Core revision 20100121
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) D CPU 3.20GHz stepping 04
Booting Node 0, Processors #1
Brought up 2 CPUs
Total of 2 processors activated (12773.54 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: ACPI Dock Station Driver: 1 docks/bays found
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xbfe00000-0xefffffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xf4000000-0xfebfffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xffa80800-0xffa80bff] (ignored)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: reg 10: [mem 0xfeb00000-0xfeb7ffff]
pci 0000:00:02.0: reg 14: [io 0xe898-0xe89f]
pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0xfeac0000-0xfeafffff]
pci 0000:00:02.1: reg 10: [mem 0xfeb80000-0xfebfffff]
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xff80-0xff9f]
pci 0000:00:1d.1: reg 20: [io 0xff60-0xff7f]
pci 0000:00:1d.2: reg 20: [io 0xff40-0xff5f]
pci 0000:00:1d.3: reg 20: [io 0xff20-0xff3f]
pci 0000:00:1d.7: reg 10: [mem 0xffa80800-0xffa80bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.2: reg 10: [io 0xec00-0xecff]
pci 0000:00:1e.2: reg 14: [io 0xe8c0-0xe8ff]
pci 0000:00:1e.2: reg 18: [mem 0xfeabfa00-0xfeabfbff]
pci 0000:00:1e.2: reg 1c: [mem 0xfeabf900-0xfeabf9ff]
pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.2: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07]
pci 0000:00:1f.2: reg 14: [io 0xfe10-0xfe13]
pci 0000:00:1f.2: reg 18: [io 0xfe20-0xfe27]
pci 0000:00:1f.2: reg 1c: [io 0xfe30-0xfe33]
pci 0000:00:1f.2: reg 20: [io 0xfea0-0xfeaf]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20: [io 0xe8a0-0xe8bf]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:01.0: PCI bridge to [bus 01-04]
pci 0000:00:01.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xf6f00000-0xfe9fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
pci 0000:02:02.0: PME# disabled
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:01:00.0: bridge window [mem 0xf6f00000-0xfe9fffff]
pci 0000:01:00.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:03:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:03:00.0: reg 24: [io 0xdc80-0xdcff]
pci 0000:03:00.0: reg 30: [mem 0xfe900000-0xfe91ffff pref]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:02:00.0: bridge window [mem 0xfa000000-0xfe9fffff]
pci 0000:02:00.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: reg 10: [mem 0xf7000000-0xf7ffffff]
pci 0000:04:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:04:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:04:00.0: reg 24: [io 0xcc80-0xccff]
pci 0000:04:00.0: reg 30: [mem 0xf6f00000-0xf6f1ffff pref]
pci 0000:02:02.0: PCI bridge to [bus 04-04]
pci 0000:02:02.0: bridge window [io 0xc000-0xcfff]
pci 0000:02:02.0: bridge window [mem 0xf6f00000-0xf9ffffff]
pci 0000:02:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:05:00.0: reg 10: [mem 0xf6ef0000-0xf6efffff 64bit]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xf6e00000-0xf6efffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.1: PCI bridge to [bus 06-06]
pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.1: bridge window [mem 0xf6d00000-0xf6dfffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 00000000bfd86c00 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:01: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x0c00-0x0c7f] has been reserved
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x00100000-0x00ffffff] could not be reserved
system 00:09: [mem 0x01000000-0xbfd86bff] could not be reserved
system 00:09: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:09: [mem 0x000c0000-0x000d3fff] has been reserved
system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed9ffff] has been reserved
system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:09: [mem 0xffc00000-0xffffffff] has been reserved
system 00:0a: [io 0x0100-0x01fe] could not be reserved
system 00:0a: [io 0x0200-0x0277] has been reserved
system 00:0a: [io 0x0280-0x02e7] has been reserved
system 00:0a: [io 0x02f0-0x02f7] has been reserved
system 00:0a: [io 0x0300-0x0377] could not be reserved
system 00:0a: [io 0x0380-0x03bb] has been reserved
system 00:0a: [io 0x03c0-0x03e7] could not be reserved
system 00:0a: [io 0x03f6-0x03f7] could not be reserved
system 00:0a: [io 0x0400-0x04cf] has been reserved
system 00:0a: [io 0x04d2-0x057f] has been reserved
system 00:0a: [io 0x0580-0x0677] has been reserved
system 00:0a: [io 0x0680-0x0777] has been reserved
system 00:0a: [io 0x0780-0x07bb] has been reserved
system 00:0a: [io 0x07c0-0x07ff] has been reserved
system 00:0a: [io 0x08e0-0x08ff] has been reserved
system 00:0a: [io 0x0900-0x09fe] has been reserved
system 00:0a: [io 0x0a00-0x0afe] has been reserved
system 00:0a: [io 0x0b00-0x0bfe] has been reserved
system 00:0a: [io 0x0c80-0x0caf] has been reserved
system 00:0a: [io 0x0cb0-0x0cbf] has been reserved
system 00:0a: [io 0x0cc0-0x0cf7] has been reserved
system 00:0a: [io 0x0d00-0x0dfe] has been reserved
system 00:0a: [io 0x0e00-0x0efe] has been reserved
system 00:0a: [io 0x0f00-0x0ffe] has been reserved
system 00:0a: [io 0x2000-0x20fe] has been reserved
system 00:0a: [io 0x2100-0x21fe] has been reserved
system 00:0a: [io 0x2200-0x22fe] has been reserved
system 00:0a: [io 0x2300-0x23fe] has been reserved
system 00:0a: [io 0x2400-0x24fe] has been reserved
system 00:0a: [io 0x2500-0x25fe] has been reserved
system 00:0a: [io 0x2600-0x26fe] has been reserved
system 00:0a: [io 0x2700-0x27fe] has been reserved
system 00:0a: [io 0x2800-0x28fe] has been reserved
system 00:0a: [io 0x2900-0x29fe] has been reserved
system 00:0a: [io 0x2a00-0x2afe] has been reserved
system 00:0a: [io 0x2b00-0x2bfe] has been reserved
system 00:0a: [io 0x2c00-0x2cfe] has been reserved
system 00:0a: [io 0x2d00-0x2dfe] has been reserved
system 00:0a: [io 0x2e00-0x2efe] has been reserved
system 00:0a: [io 0x2f00-0x2ffe] has been reserved
system 00:0a: [io 0x5000-0x50fe] has been reserved
system 00:0a: [io 0x5100-0x51fe] has been reserved
system 00:0a: [io 0x5200-0x52fe] has been reserved
system 00:0a: [io 0x5300-0x53fe] has been reserved
system 00:0a: [io 0x5400-0x54fe] has been reserved
system 00:0a: [io 0x5500-0x55fe] has been reserved
system 00:0a: [io 0x5600-0x56fe] has been reserved
system 00:0a: [io 0x5700-0x57fe] has been reserved
system 00:0a: [io 0x5800-0x58fe] has been reserved
system 00:0a: [io 0x5900-0x59fe] has been reserved
system 00:0a: [io 0x5a00-0x5afe] has been reserved
system 00:0a: [io 0x5b00-0x5bfe] has been reserved
system 00:0a: [io 0x5c00-0x5cfe] has been reserved
system 00:0a: [io 0x5d00-0x5dfe] has been reserved
system 00:0a: [io 0x5e00-0x5efe] has been reserved
system 00:0a: [io 0x5f00-0x5ffe] has been reserved
system 00:0a: [io 0x6000-0x60fe] has been reserved
system 00:0a: [io 0x6100-0x61fe] has been reserved
system 00:0a: [io 0x6200-0x62fe] has been reserved
system 00:0a: [io 0x6300-0x63fe] has been reserved
system 00:0a: [io 0x6400-0x64fe] has been reserved
system 00:0a: [io 0x6500-0x65fe] has been reserved
system 00:0a: [io 0x6600-0x66fe] has been reserved
system 00:0a: [io 0x6700-0x67fe] has been reserved
system 00:0a: [io 0x6800-0x68fe] has been reserved
system 00:0a: [io 0x6900-0x69fe] has been reserved
system 00:0a: [io 0x6a00-0x6afe] has been reserved
system 00:0a: [io 0x6b00-0x6bfe] has been reserved
system 00:0a: [io 0x6c00-0x6cfe] has been reserved
system 00:0a: [io 0x6d00-0x6dfe] has been reserved
system 00:0a: [io 0x6e00-0x6efe] has been reserved
system 00:0a: [io 0x6f00-0x6ffe] has been reserved
system 00:0a: [io 0xa000-0xa0fe] has been reserved
system 00:0a: [io 0xa100-0xa1fe] has been reserved
system 00:0a: [io 0xa200-0xa2fe] has been reserved
system 00:0a: [io 0xa300-0xa3fe] has been reserved
system 00:0a: [io 0xa400-0xa4fe] has been reserved
system 00:0a: [io 0xa500-0xa5fe] has been reserved
system 00:0a: [io 0xa600-0xa6fe] has been reserved
system 00:0a: [io 0xa700-0xa7fe] has been reserved
system 00:0a: [io 0xa800-0xa8fe] has been reserved
system 00:0a: [io 0xa900-0xa9fe] has been reserved
system 00:0a: [io 0xaa00-0xaafe] has been reserved
system 00:0a: [io 0xab00-0xabfe] has been reserved
system 00:0a: [io 0xac00-0xacfe] has been reserved
system 00:0a: [io 0xad00-0xadfe] has been reserved
system 00:0a: [io 0xae00-0xaefe] has been reserved
system 00:0a: [io 0xaf00-0xaffe] has been reserved
system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:0a: [mem 0xfeda0000-0xfedacfff] has been reserved
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4000000-0xf41fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:02:00.0: bridge window [mem 0xfa000000-0xfe9fffff]
pci 0000:02:00.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:02.0: PCI bridge to [bus 04-04]
pci 0000:02:02.0: bridge window [io 0xc000-0xcfff]
pci 0000:02:02.0: bridge window [mem 0xf6f00000-0xf9ffffff]
pci 0000:02:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:01:00.0: bridge window [mem 0xf6f00000-0xfe9fffff]
pci 0000:01:00.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-04]
pci 0000:00:01.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xf6f00000-0xfe9fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xf6e00000-0xf6efffff]
pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf41fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 06-06]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xf6d00000-0xf6dfffff]
pci 0000:00:1c.1: bridge window [mem 0xf4200000-0xf43fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07-07]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:01:00.0: setting latency timer to 64
pci 0000:02:00.0: setting latency timer to 64
pci 0000:02:02.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xf6f00000-0xfe9fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf6f00000-0xfe9fffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfe9fffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xf6f00000-0xf9ffffff]
pci_bus 0000:04: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:05: resource 1 [mem 0xf6e00000-0xf6efffff]
pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf41fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:06: resource 1 [mem 0xf6d00000-0xf6dfffff]
pci_bus 0000:06: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref]
pci_bus 0000:07: resource 4 [io 0x0000-0xffff]
pci_bus 0000:07: resource 5 [mem 0x00000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 2352k freed
Simple Boot Flag at 0x7a set to 0x1
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1282163388.303:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 6026
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS
pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: no _OSC support
pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13
pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: no _OSC support
pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS
pcieport 0000:00:1c.1: Failed to receive control of PCIe PME service: no _OSC support
pcie_pme: probe of 0000:00:1c.1:pcie01 failed with error -13
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 480k freed
udev: starting version 158
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata2: port disabled. ignoring.
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20
ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20
ata1.00: ATAPI: TSSTcorpDVD-ROM TS-H352C, DE02, max UDMA/33
ata1.01: ATAPI: PHILIPS DVD+/-RW DVD8701, 5D24, max UDMA/33
ata1.00: configured for UDMA/33
ata1.01: configured for UDMA/33
scsi 0:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-H352C DE02 PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM PHILIPS DVD+-RW DVD8701 5D24 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
sr 0:0:1:0: Attached scsi CD-ROM sr1
ata3.00: ATA-6: ST3160023AS, 8.12, max UDMA/133
ata3.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3160023AS 8.12 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
EXT3-fs (dm-2): mounted filesystem with writeback data mode
kjournald starting. Commit interval 5 seconds
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
udev: starting version 160
input: PC Speaker as /devices/platform/pcspkr/input/input0
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
agpgart-intel 0000:00:00.0: Intel 945G Chipset
agpgart-intel 0000:00:00.0: detected 764K stolen memory
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Floppy drive(s): fd0 is 1.44M
sr 0:0:0:0: Attached scsi generic sg0 type 5
sr 0:0:1:0: Attached scsi generic sg1 type 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [VBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
FDC 0 is a post-1991 82077
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
iTCO_vendor_support: vendor-support=0
ppdev: user-space parallel port driver
lp0: using parport0 (interrupt-driven).
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
tg3.c:v3.108 (February 17, 2010)
tg3 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:05:00.0: setting latency timer to 64
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: unable to reset NO_REBOOT flag, platform may have disabled it
tg3 0000:05:00.0: eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001] (PCI Express) MAC address 00:14:22:39:5d:0e
tg3 0000:05:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
tg3 0000:05:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:05:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
usb 1-6: new high speed USB device using ehci_hcd and address 4
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-2: new full speed USB device using uhci_hcd and address 3
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 3 ports detected
usb 2-2.1: new low speed USB device using uhci_hcd and address 4
leds_ss4200: no LED devices found
usbcore: registered new interface driver hiddev
input: Microsoft Corporation Microsoft ® Laser Mouse 6000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
generic-usb 0003:045E:00F0.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Corporation Microsoft ® Laser Mouse 6000] on usb-0000:00:1d.0-1/input0
input: Dell Dell Multimedia Pro Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input4
generic-usb 0003:413C:2011.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell Multimedia Pro Keyboard] on usb-0000:00:1d.0-2.1/input0
input: Dell Dell Multimedia Pro Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.1/input/input5
generic-usb 0003:413C:2011.0003: input,hidraw2: USB HID v1.10 Device [Dell Dell Multimedia Pro Keyboard] on usb-0000:00:1d.0-2.1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Intel ICH 0000:00:1e.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Intel ICH 0000:00:1e.2: setting latency timer to 64
nvidia 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:03:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:04:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 256.35 Wed Jun 16 18:42:44 PDT 2010
intel8x0: white list rate for 1028:01ad is 48000
EXT3-fs (dm-2): using internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-5): using internal journal
EXT3-fs (dm-5): mounted filesystem with writeback data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-4): using internal journal
EXT3-fs (dm-4): mounted filesystem with writeback data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-0): using internal journal
EXT3-fs (dm-0): mounted filesystem with writeback data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-1): using internal journal
EXT3-fs (dm-1): mounted filesystem with writeback data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with writeback data mode
Adding 2097148k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:2097148k
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
tg3 0000:05:00.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:05:00.0: eth0: Flow control is off for TX and off for RX
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
Last edited by jasonwryan (2010-08-18 21:47:33)

The PC does support 4Gb of ram, although it's the max it supports, it does support it. I have read quite a bit about other people having this issue with other systems and I've gone all through my bios looking for SOME sort of option that I can at least play around with, but there's nothing there. I've also upgraded the bios thinking that "maybe" it could be something with that. The video card I'm using is a Nvidia Quadro NVS 420 512 Mb. I've tried disabling IndirectMemoryAccess in my xorg.conf thinking that might be messing with it somehow, but it did nothing. I just tried removing the video card altogether and running w/ the onboard video and alas! I recovered 512Mb, which I would be pleased with, but when I add the card back, the available ram disappears again. So now my question is this... Why would the kernel be reserving 512Mb of system ram for a card that has 512Mb of ram built in (at the same time not visibly acknowledging the fact that it exists)? Is this maybe a kernel option that I can pass at boot to disable it from reserving the system ram?
I'm sorry about the lack of the bbcode tags btw, I'm a first timer to the forums (however an arch user for some time now).
Thanks again for any input, it's much appreciated!

Purchased whole album but only one song available for download

Some time ago purchased album Vēl Viena Klusā Daba by Prāta Vētra. From the whole album only one song is available for download.
Tried to delete and re-download. Remaining songs also not available under downloadable items.

Hey there Egils1969,
It sounds like you have purchased an entire album but for some reason only 1 song is available for download. I would report a problem with your purchase to the iTunes Store support directly with this website:
https://reportaproblem.apple.com
Thank you for using Apple Support Communities.
Cheers,
Sterling

Max memory used in imac 2007 is 4gb but only 3 gb is every used

imac mid 2007 24inch has 4 gb installed but only uses 3gb.

It seems that there is other data that is taking up space on the iPod. I suggest formating the iPod.
Connect the iPod
Open My Computer
Right Click the iPod
Choose Format
Simply click ok.
Once you have formated the iPod you need to restore it (http://docs.info.apple.com/article.html?artnum=60983)
Then try and update the music on the iPod.

Download music but only one songs seems to transfer

Can somebody please please help me! I have tried on numerous occassions to make this device work with me, but it aint. I have erased all songs and freshly added more to the shuffle, only to find that one song has actually been added. This cause a problem as on many occassions I have sat there for hours adding songs and albums only to find that I can listen to one out of um let's say about 100. If somebody has a easy solution I would love to hear from you. Thanks

Stacey - Let's start troubleshooting here, Go to iTunes, select one of the songs that you'd like to transfer to the shuffle that never made it and click on it. Then click CTRL + I. A window will pop up with information on the selected song. Can you tell us what it says next to each of the following entries?
1)Kind
2)Size
3)Bitrare

( -50 ) error ... cant sync entire library but only few songs HELP!!!

I could only sync 10 songs out of 800 to my ipod, this -50 error comes up, as well as the "disk could not be read or written to error". Here is a screenshot with my digi cam:
Could this be an HD problem with my iPod? I tried syncing my library from my other ipod, but when I drag it to the ipod, its so slow in updating...and then the error would come up. Right now, I only have 10 songs on my iPod, certain songs would get on, the rest would just not go on.
Anyone know what this -50 error is and know how to fix it?
~ trigger

Check out this article on the KBase:
http://docs.info.apple.com/article.html?artnum=304820
If restoring the iPod doesn't resolve the issue then you can try deleting the file that iTunes is currently transferring when the error occurs. The file could possibly be corrupted.

HT203167 Can't locate song list of the items purchased after buying a new computer. Removed 5 previous computers and follwed instruction and find but only on song of hundreds. Apple is a pain. I don't get the high brand appeal and goodwill. $+,+time,-

Problem accessing purchased Itunes with new computer.
6th computer purchase. Followed weak Apple instructions,...removed 5 computers, etc. Called Apple service desk. Followed instructions sent by rep that were stated to be a sure fix and easy.
Lost several hundreds of worth of music purchased before.
Can't understand the Apple appeal and goodwill.
Always overpriced, waste of time, lack of features and poor customer help. It's all about sales, image, marketing and growing. Little to do with concern for the customer value.
Any ideas on how to find the library of purchased (paid in full) songs are appreciated.
Thanks!

I love the new version of Grid view but some of the other changes feel like they still need some fine tuning. And I miss cover flow even if I didn't use it that often...
You can restore much of the look & feel of the previous version with these shortcuts:
Ctrl-B to turn on the menu bar.
Ctrl-S to turn on the sidebar (your device should be listed here as before).
Ctrl-/ to turn on the status bar.
Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour.
Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (but perhaps it does more)
If you want to roll back to iTunes 10.7 first download a copy of the 32 bit installer or 64 bit installer as appropriate, uninstall iTunes and suppporting software, i.e. Apple Application Support & Apple Mobile Device Support. Reboot. Restore the pre-upgrade version of your library database as per the diagram below, then install iTunes 10.7.
See iTunes Folder Watch for a tool to scan the media folder and catch up with any changes made since the backup file was created.
tt2

ITunes burning CD but only 1st song plays on other CD players

After burning a CD via iTunes all songs will play on the PC's CD player. However, when I put the CD into a portable CD player or auto CD player only the first song plays.

You may try to switch to another brand of CDs (e.g. Verbatim) and/or reduce iTunes writing speed: Car/Portable players are sometimes quite picky.

Can't play via midi keyboard - but only one song!

I am using logic 7 now for over a year. all my songs are ok.
but there is one single one on which I can't play keyboard notes on the
software instruments. it seems all midi events do not arrive at the song.
the transport window doesn't show any events. in the environment,
if I go to the "Input View" layer, I can see midi notes being received!!!!
but somewhere on the way they get lost.
that's strange as for all the other songs there's no problem at all.
so it must be something song specific. any ideas?
the input filter check boxes in the midi settings are not checked, btw.
thanks for any help, really appreciated, as it drives me nuts, I'd like to
finish that song...

You say this affects Audio Instruments; does that mean that if you use external devices, they play back okay?
If the note events are being received in the Environment, then it sounds like either they are then being routed away from the track you intended, or they are being muted.
First check for muted tracks, & then for soloed tracks (since these will mute all the others). Make sure you can see all the tracks & busses when you look!
Next, look at the input object which is receiving MIDI & see where it is routed. Unless it is routed to the track you want, you won't get the result you need. You can try switching it to another Audio Instrument to see if that makes a difference.
Also check inserts, in case you are (e.g.) gating the input!
I assume playback of previously-recorded tracks is not affected?
Do regions get created when you record (even though you can't hear anything), & if so, can you see note events when you inspect them in the editors?

How do I determine what Ram my macbook would need, it seems to max out at 4GB, but only has 2GB right now...

Processor
Memory
Processor speed:
- 2.1 GHz
Processor Type:
- Intel, Core 2 Duo (Penryn)
Number of Cores:
- 2
Bus Speed:
- 800 MHz
Cache:
- 3 MB L2 cache
64-bit Support:
- Yes
Turbo Boost:
- No
Installed RAM:
- CTO
Max. Amount:
- 4.0 GB
Amount of Slots:
- 2
RAM Speed:
- 667 MHz
RAM Type:
- PC2-5300, DDR2, SO-DIMM.

First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info . When System Profiler comes up check the Model Identifier and post it back here.
The model 1,1 (Early 2006) can use 2gb of 200 pin 667mhz PC2-5300 RAM
The model 2,1 (Late 2006 & Mid 2007) can use 3gb of 200 pin 667mhz PC2-5300 RAM
The model 3,1 (Late 2007) can use 6gb of 200 pin 667mhz PC2-5300 RAM
The model 4,1 (Early 2008) can use 6gb of 200 pin 667mhz PC2-5300 RAM
The model 5,2 (Early 2009, 2.0GHz Model Only) can use 6gb of 200 pin 667mhz PC2-5300 RAM

Im going to restore my ipad but only 6 songs are going to my library!!!

help plz!!!!

Is iTunes authorized for the account the items were purchased with?
The media on the iPad was actually purchased from iTunes, correct?
Have you actually tried transferring purchases by selecting File > Transfer purchases with the iPad connected?

Hi my main computer with all my albums has died but on my itunes account ther is only 111 songs how can i transfer the rest from my ipod touch

hi my main computer has died and i have 1500 songs on my ipod touch but only 111 songs show on my i tunes account is ther a way to sync with a new computer and not lose all my albums

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

4GB but only 266 songs!

Similar Messages

Maybe you are looking for