5-in-1 Card Reader on T410i / Windows 7 x32

Is there a post, or website, spelling out (in simplest terms) how to set up this onboard device from BIOS (if necessary) onward to full function? I want to start this from scratch since, to date, I've tried too many times and had no luck.
Surely someone else has been down this road before ...succesfully!

As I understand your laptop memory card reader is not functioning.
You can go to BIOS by pressing F1 key then press F9 to load default settings and then F10 to save the settings and exit from BIOS.
Hope, this will help you.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Slow USB Card Reader - MacBook Air / Windows 7 64-bit / Boot Camp 3.2

Installation of Windows 7 64-bit on my new MacBook Air 11" seemed to go flawlessly from the attached USB SuperDrive. I see no driver issues or unrecognized devices in Device Manager. However, when attaching my Transcend USB 2.0 Compact Flash card reader to load pictures from my camera into Lightroom 3.3, data transfer is mega-SLOW. It takes several minutes (10?) to transfer just 4 pictures. It seems like it may be operating at USB 1.0 speeds.
Installing software from the SuperDrive on the same USB port seems to work fine. Attaching a USB mouse works fine. However, the USB card reader is very, very slow.
If I attach the same card reader, CF card, and cable to another Windows 7 machine, it works fine, so I don't think there's a problem with my reader / card / cable.
Any thoughts about how I might improve performance for the card reader on the MacBook Air (other than running Mac OS)?
Thanks!
Matt

Posted to wrong forum - sorry for the error.

Cannot access card reader Z61t in Windows 7

hello all,
I just recently installed Windows 7 Enterprise, all the driver were installed, but I still can't access my card reader
anyone can help?

Hi dezig,
Welcome to the forum!
Have a look at this thread:- http://forums.lenovo.com/t5/Z-Series-ThinkPad-Laptops/Z61m-Card-Reader/td-p/200967
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Smart Card Reader 2 on Windows 8

I have a need to use a smart card to log into my work laptop. Unfortunately, my laptop does not have a built-in smart card reader and I'd like to avoid using an external USB smart card reader if possible. For this reason, I purchased a Blackberry Smart Card Reader 2, which from what I could find online, should be able to provide the same functionality as an external USB smart card reader.
I installed the software and rebooted the computer. However, when I try and discover the Smart Card Reader (SCR) the laptop seems to see the SCR, but then the connection window closes and I never get the chance to enter the PIN. Reviewing the eventlogs and system processes, I can see that BlackberrySCRService.exe process which is running as a service quits after the device is discovered.
I've tried running the Windows compatibility tool on the process which suggested running in XP compatibility mode, but that did not help. Can somebody tell me how I can use my Blackberry SCR 2 on my Windows 8 laptop? Thanks in advance.

hello, I don't have any knowledge about that reader.
You can find the manual here:
http://docs.blackberry.com/en/admin/subcategories/?userType=2&category=BlackBerry+Smart+Card+Reader
My personal understanding is that this reader is not compatible with Windows 7 and Windows 8, and only if that BlackBerry is linked to a BES server.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

SD card reader driver after windows 8 upgrade for hp 2000 notebookPC

My SD card reader doesn't work, how do I get it to work? I updated windows 8 to 8.1. I never used the SD reader before update. I have HP 2000 notebook. Please help. Thank you

Hi:
This driver should work...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-126476-1&cc=us&dlc=en&lc=en...

Search for a driver: Ricoh Multi Card Reader for Windows 8 - for my T61 (6463) -

Hi!
I`m searching for a Windows 8-Driver for my T61 (6463).
I have a Ricoh Multi Card Reader inside and I can`t find a driver for this one.
Can anybody help me?
Thank you,
Heiko
Solved!
Go to Solution.

Hello,
Try downloading the following driver:
Name: Ricoh Multi Card Reader Driver for Windows Vista, XP
Version: 3.54.02
Date: 06 Mar 2008
URL: http://support.lenovo.com/en_US/detail.page?LegacyDocID=migr-68053
The drivers will extract to a directory named "C:\DRIVERS\WIN\4IN1\", if I recall correctly. Once extracted, run Device Manager (filename: DEVMGMT.MSC), go to the entry where the unrecognized card reader is located, and perform an update, using the "Have Disk" option and pointing it to the directory in which the drivers were extracted.
I do not recall if a reboot is required, but in any case I would recommend doing one, at which point you should then be able to see the card reader from Windows 8.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

T430s SDHC card reader not working

Hi, I recently bought a T430s and when I tried to insert a SD card it did not show up in my computer. I've tried 3 different SD cards the sizes are16 gb, 32 gb and 2 gb and neither of them shows up, to make sure the problem is not in the SD card I tried using the SD cards in 2 cameras and 2 other laptops. In all those devices the cards works.
I have tried installing these drivers from this thread https://forums.lenovo.com/t5/T400-T500-and-newer-T-series/New-T430s-4-in-1-express-card-SD-reader-mi... but it did not work.
I also tried following the instructions in this thread http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T430s-card-reader-cannot-read-16-GB-SDHC-ca... but that did not help either.
According to the device manager the Ricoh PCIe SDXC/MMC Host Controller is working correctly. The Ricoh SD Disk Device is also working correctly.
Whenever I insert the SD card the Sound for a new device plays and when i remove the SD card the removal sound plays. How can I fix this? I'm going away for 7 weeks with my laptop so I need to fix it ASAP and I dont have time to send the laptop to Lenovo.
EDIT:
I uninstalled Ricoh Media driver and now 1 of the cards show up but Windows complains about that it needs to be formatted, but the size is 0 so that doesn't work either. Tried installing the driver again and now they show up in the device manager again and proudly says that they are working but the SD card still doesn't show up so I can read the files on it.
EDIT 2:
If I go into the device manager and forcibly update the the Ricoh SD Disk Device then it says:
Disc: Disc 1
Type: Removable
Status: Online
Partitiontype: MBR (Master Boot Record)
Capacity: 15807 MB
Non-allocated space: 0 MB
Allocated space: 0 MB
For the 32 gb SD card everything is the same but instead it says "Capacity: 30828 MB".
EDIT 3:
When the SD card is inserted a storage device pops up in the device manager. The name of the device is just "Unknown device" and the status is that it can't find any installed drivers for the device.

I'm experiencing a similar situation with my 1-year old T430s. The built-in card reader was working fine until recently when it stopped working.
Now the built-in SD card reader doesn't recognize SD cards that are recognized in external USB adapters.
Device Manager shows Ricoh PCIe SDXC/MMC Controller when an SD card is inserted into the card reader but neither Windows Computer Management/Disk Management nor Windows Explorer show the drive. Device Manager indicates that the driver is up-to-date (v6.10.10.32 25May11.)
When I put the same SD cards into an external USB adapter they're recognized by Windows, assigned a drive letter and visible to Windows Explorer as well as other applications.
Do I have a defective card reader?
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

SD card reader driver

Hello i have a k220 and it came with vista but i didnt like that so i installed xp on it. Does anyone know where I can get the SD card reader driver for windows xp??

Qosmio F45-AV412 Specifications
Qosmio F45-AV412 Downloads
As it sounds like you have done what amounts to a 'clean' or custom install of Windows 7 Ultimate, make sure that you have carefully followed these directions, and then use the driver/software installation utility, this might resolve your problems.
How to Custom Install Windows 7
Toshiba Software Installer for Windows 7
Please let us know what happens. Good luck.
Mike

PSE 6.0 freezes when attempting to access card reader

Also, when I go into Edit/Preferences/card reader, PSE 6.0 will freeze. I tried the repair option on the original DVD but still have same problem. Also, I can access the card reader through other Windows programs.

Are you using Windows XP or Vista? If XP, go to the following location: "C:\Documents and Settings\<user profile name>\Application Data\Adobe\Photoshop Elements\7.0\Organizer" and delete APDPreferences.xml. Launch APD again and see if this solves your problem Please also confirm if there is any Printer/ Scanner software installed on the system. Thanks, Tarun

SD Card Reader is Identified as WPD FileSystem Volume Driver and will not read SD card(s).

HP Pavillion Elite-110f Desktop PC
Windows 7 64-bit
In Device Manager "This device cannot start."
Temporarily Used MiniTool Patition Wizard to repartition my SD card for my Android phone. When I noticed issue, I uninstalled the program. Windows Disk Management see's the SD Card; Ubuntu sees the SD card; yet it doesn't appear in "Computer." Thus I cannot transfer files.
I have reinstalled all AMD Motherboard Drivers and Alcor USB 2.0 drivers. Issue still remains.
This question was solved.
View Solution.

Maybe you are missing the SD card reader driver. When you plug your SD card reader in the computer, it will automtically install a compatible driver for your SC card reader to work and to read your card data. If the driver isn't installer properly, your card reader won't work. Use Windows Update to update the driver, alternatively, you can try DriveTheLife. Related source is: http://www.drivethelife.com/windows-drivers/how-to-free-download-update-card-reader-driver-on-window...

K210 Card Reader

Hi, the Card Reader work ed just fine on my Lenovo K210 system for the 1st year but I have been having problems with it since and would appreciate help. I haven't used my camera for a while and when I tried to read my 16GB Memory cards (I have 16GB Scandisk and 16GB Patriot Memory Card), and when I opened My Computer, NONE of the 4 Card Readers (that came with the system the system) appeared so re-install the IN3CAR01WWs.EXE drive and still NOTHING appeared on My Computer.
FYI, I upgraded the OS to W7 (the Reader worked fine with W7 for at least 6 months) and have a 16GB Memory Crad that I would like to read and would appreciate ANY help that you can offer
Thank you
Bob

hey Boblink,
could you uninstall the current card reader driver, let windows install its generic drivers and see if that works for you.
also, those two memory cards, does it work with other readers ?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Flex 14 SD card reader not working with larger cards on Windows 8.1

The card reader in my Flex 14 is behaving very oddly. When I insert a 16GB SDHC card it makes the 'USB inserted' noise and the card shows up under device manager but I can't access it through file explorer. The card reader works fine with smaller SD cards that I have. I tried the card in another, Win7 laptop and it worked fine.
I see a number of other people are having a similar problem and I have followed all of the troubleshooting advice I can find, but nothing is working. Does anyone have any other suggestions?
This is what I have tried:
1. Leaving the card in the camera and attaching the camera via USB cable to the laptop: same result, noise, but can't access the card.
2. Trying to reassign the drive letter through storage controller: it shows the card but if you right click it to assign it a drive letter it says the 'file is missing'.
3. Downloaded the Win8.1 x64 driver from Lenovo website and installed. This stopped the card being recognised at all.
4. Installed the Win8 xc4 driver: this got me back to the noise but no action stage.
5. Updated Windows.
6. Uninstalled and reinstalled the driver numerous times both with the card inserted and without it and with restarting the computer after unistall and after reinstall.
7. Ran Ubunutu from a live USB: This allowed me to see the card and copy its contents to the laptop's HDD.
So it seems to be some incompatibility between the Lenovo drivers and Win8.1. Potentially it's to do with the USB drivers rather than the card reader drivers as the result when using the USB cable and the camera was the same as putting the card in the card reader. Is there a way to update these?
Any other troubleshooting steps I could take?
Thanks.

What size are the cards?
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Using The iPad Camera Connection Kit
http://support.apple.com/kb/HT4101
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

Digital card reader no longer works for Windows 7 Pc, 3yrs old

Help, my digital card reader no longer works for Windows, 32bytes, on my 3 year old pc. HP does not have any any down loads for this. Any suggestions where else I can find them that would not interferre with other functions of my pc

Hi,
What is your machine ? The following devices may help:
http://www.ebay.com.au/bhp/usb-card-reader
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Sd card reader no longer reading - windows 7 pavilion g7-1273nr

My SD card reader is no longer recognizing my SD cards.

Hello sifer5,
Welcome to the HP Forums!
I understand the SD card reader is no longer reading SD cards. To assist you, please try the steps in this document: Using and Troubleshooting Memory Card Readers (Windows 7 and Vista)
Please let me know your results. Thanks!
Mario
I worked on behalf of HP.

T510 Windows XP 64bit - Multi Card reader no longer working

Just installed XP 64 bit from XP 32 because i finally got tired of windows only recognizing 2GB of RAM.
I have just discovered the multi card reader no longer works (it worked just a few days ago with the 32 bit xp).
i have tried uninstalling and reinstalling the driver (6hss03ww.exe - Ricoh Multi Card Reader Driver) several times, with no luck.
i do not have any uninstalled drivers, or highlighted items in the device manager.
Has anyone else ever has this issue, or can offer some advice? i am a bit at a loss... and ready to dump this thing out the window and buy a mac...

Hello mate,
Lenovo doesn't support windows xp 64-bit. If you have a look in the readme file it says
Added support for Microsoft Windows XP Professional x64 Edition (on ThinkPad
W510 only).
Install windows vista or 7 if you want a 64-bit OS.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

5-in-1 Card Reader on T410i / Windows 7 x32

Similar Messages

Maybe you are looking for