50% grey mask over menu in DVD Studio Pro

Hi everyone,
I have created a new menu onto an existing DVD project. The new menu has a 50% haze over it, something like a mask. I can temporarily get rid if it if I go to VIEW / DISPLAY STATUS / BACKGROUND but after the next operation it goes back to the mask. I've compared its settings to other menus on the same project and they are the same. I've also taken the project to another computer with DVD Studio Pro and the same issues occurs.
If some could suggest a solution I'd be very grateful.

Drew, if you send them back when they guess wrong without letting them select 4 times they'll be able to figure out the code through process of elimination pretty quick...
A typical method for this is to add one to a register on the correct button press. After the 4th if the register equals 4 goto the secret stuff and if not go to the begining (clear registers) and start again or to another asset saying failed or whatever...
Not too complex.
Code: 1, 3, 5, 0
Menu1: All buttons link to Menu2 except button 1 which jumps to a script, adds 1 to a GPRM and then jumps to menu2.
Menu2: All buttons link to Menu3 except button 3 which jumps to a script, adds 1 to a GPRM and then jumps to menu3.
Menu3: All buttons link to Menu4 except button 5 which jumps to a script, adds 1 to a GPRM and then jumps to menu4.
Menu4: All buttons link to a check register value script except button 0 which jumps to a script, adds 1 to a GPRM and then jumps to the check register script,
The check register script just needs to check the register value, send users where they are allowed to go and make sure you clear the register somewhere,
-Jake

Similar Messages

How Can I Create a Function to Return to a Specific Menu on DVD Studio Pro?

Hello, I am currently building a DVD for a TV series I created while in college, and I'm having trouble figuring out how to create a function within the DVD that lets the user select the title or menu buttons on their remotes and have that return them either to a) the main menu or b) the menu they were just at, ie episode select or chapter select. Any help is appreciated! Thanks!

Thanks for the help. I'm still a little confused on how to get it select which menu that I would like to return to.

DVD Studio Pro 4 - dragging template to menu locks up the software

When I drag one of the templates to the menu window, DVD Studio Pro locks up.
The template displays in the menu window, but the Applying Template window stays on with the horizontal barber pole running.
The only recourse is to force a quit.
Any advice will be appreciated.
Thanks------Roger from Louisville

After further investigation, it appears that I'm unable to create any shape on the menus (i.e. button shapes). Drag and drop of any pre-existing shape from the right-hand box has no effect at all.
Could this have anything to do with file system permissions?

Adjusting audio DVD Studio Pro

I've imported a tune to play over the menu in DVD Studio Pro. But I can't figure out how to adjust the volume.
It's very very loud. I know this is not the DVD Studio Pro forum, but the other forums don't get as much traffic, and I was hoping you could help me.
Thank you so much.
Jess

What I did was create a droplet in compressor from the Apple preset for Dolby 2.0 with dialogue normalization tweaked to -15dbFS. The workflow is as simple as dragging my menu music file to the droplet, them importing the resulting .ac3 into the DVDSP project.
On a side note it does seem that menu music in DVDSP is too loud if left alone. It's just one of those little quirks I've learned to work around. Whenever you're unsure of whether DVDSP can do something the rule of thumb is, DVDSP does not entail in its functionality any editing of any source media. You can move things around, script things to happen, etc but changes to the assets can't be done in the application.

How do I save still image at DVD Studio Pro?

hello,
how do I save some still image from my track to use as background menu on DVD Studio Pro?
thx

I'm not certain a screenshot would give you as good quality as the actual export still image option. I mean, if the function is there, why not just use it? Heck you could even set up FCP to just right click something and have it open in Photoshop right from the timeline... screenshots are fine as a last resort, but using the export command would be better I'd think.
And really, on DVDS, the still images in a menu background end up as a movie too anyway eventually so why not just build your menu background in FCP, make it look all good (you can import Photoshop files into the timeline) and export it out as a movie to Compressor and then to DVDSP? That's how i do it and the menus look great.

FCP Export to DVD Studio Pro

I am trying to export a QT movie file from FCP to DVD Studio Pro, but once it is in DVDSP, the file is too large to fit on a dual-layer DVD-R. Not to mention there are other files that need to be on that same DVD.
I was told to always export it with CURRENT SETTINGS ..... but when I do, they are over 10GBs in DVD Studio Pro.
Do I have to re-edit my movie to make it shorter? Its only a 45min HD Video. Or is there a setting I am missing here?
Please help! Thanks so much.

Yes, export with current settings. But you're leaving out the crucial step, which is creating the mpeg file that dvdsp needs. You can either make it in compressor or let dvdsp do it in the background while you author your menus etc. It's the same engine either way. But having dvdsp do it, while in one way simpler-- the controls need a lot more drilling down to find. Sorry if that's a convoluted sentence. Too many jelly beans.

DVD Studio Pro 4 (a stand alone product)? Need advice purchasing BD authoring software

According to Wiki, DVD STUDIO PRO-4 came with the "creative suite" that was discontinued by Apple in 2006.
In 2003-2005 I used DVD Studio Pro-2. That was THEN.
Now I have now an overkill PowerMac G5, FCPX, and Compressor-4.   My question is what software can I purchase that will burn BLU-RAY disks and give me some menues like DVD Studio Pro?
Thanks
-Dale

Okay, I remember the days back in 2003 when using FCP4, DVD Studio2, and Compressor2 there was lots of hoopla about creating great videos -- then (at that time) Apple had no respectable DVD player software -- now (Lion) has DVD player.
In like manner, we have all this hoopla about FCPX, Compressor4, Motion5 --- and no Blu-Ray (BD) authoring software.   If Apple is worth its salt and has their marketing folks read these forums, seems like SOMEBODY would finally GET IT.   This is like building a Rolls Royce without a muffler.
Well, I've answered my own question.   I purchased TOAST-11 to read MTS files to discover it also authors BD. By clicking "create BD disk" you'll be prompted to purchase & download a $20 plugin.   Does a GREAT job with menus. Just drag your video & audio files (from compressor) and that's it.
BTY- all the "stink" around FCPX about not being able to import MTS files from disk (this is like building a Ferrari without a gas tank). Tom W gave a great suggestion to use a product called CLIPWRAP ($50). So I bought it (converts MTS to MOV without data loss).

DVD Studio Pro Document won't open.

I have been working on a DVD menu in DVD Studio Pro. Every time I quit the project and open it up again it gives me the message that the document could not be opened. I have version 4.1.2. I have Snow Leopard 10.6.6. I have tried using DiskWarrior and reinstalling DVD Studio Pro. I have tried deleting the preferences but for some reasons when I go to harddrive then to Library, then to preferences there is no DVD studio pro preferences. The menu is pretty complex is includes Play, Producer's notes, Chapters, and Crew. Crew has 9 different menus. If there is anybody that knows how to fix this problem please reply. I don't want to do just do it all in one sitting which takes 3 hours. Thank you.

Funny name.
Is this your first DVDSP production?
Reinstalling Apple software almost never solves anything.
DiskWarrior only rebuilds a drive's directories and will not help in this situation, waste of time.
ore valuable, if DW doesn't do it for you is to repair permissions on the system drive.
Your prefs may be in another library, look in your user library and search for .plist using Spotlight set to include invisible files,.
Welcome to the family.
Does the file have a DVDSP icon on it? The proper extension? What happens if you right click on it and select DVDSP form the list of apps?
Try using Google to search for the error message, sometimes that turns up remarkably rich documentation from other users or from Apple's knowledge base articles.
Give us a few days, someone may drop in but traffic can be light on DVDSP forum.
bogiesan

Compression quality: iDVD vs DVD Studio Pro vs others?

I am merrily editing along in FCE, and looking to eventually compress and burn onto DVD. Since I can use all the quality I can get, and don't have spare money (so what else is new?), I am wondering about the differences in compressing software. Is there a visible difference in the final product using DVD Studio Pro vs iDVD? Is there something else out there that is better than iDVD but doesn't cost as much as DVDSP? Any opinions or experience welcomed!
Thank you!

If your project is under an hour, iDVD will give you very satisfactory results (use the Best Performance settings).
You can create an up to 2 hour movie with iDVD but personally (with Best Quality), I think the quality begins to slide off a bit over an hour
DVD Studio Pro, with Compressor, gives you many more compression options. Compressor has lots more compression pre-sets and you can go in and tweak bit rates, single or double passes, etc. You can do that inside DVD Studio Pro as well. Overall, Studio Pro just gives you a lot more options and control.
Roxio Toast is a relatively cheap (around 80 bucks Cdn) piece of software that will compress your FC movies. You are way limited in terms of things like menus and chapters but compression wise it does a fairly nice job ... again, you don't have the versatility of iDVD. With Popcorn, it will allow you to cram a big movie onto a single layer DVD but the quality begins to hurt
Personally, no matter what you use, two hours is the reasonable quality limit for a single layer DVD

Dvd Studio Pro on formats and wont burn.

I created a menu on dvd studio pro and when I try to burn it, it only goes through the process of Formatting and it finishes. I cant play it on any dvd player, I'm pretty sure thats because its only formatted and not burnt. I cant seem to get it to burn. Any suggestions?

Wikileak:
It works even though it doesn't work.
While the display of colors in the pop-up menu is broken under Mac OS X 10.9, the palette is still there and works for setting colors. Choosing the first blank spot in the Color pop-up menu sets that first color in the palette, choosing the second blank spot on the Color pop-up menu sets the second color in the in the palette, etc. Of course, this was sooooo much easier when the Color pop-up menu displayed color swatches as expected.
If you click the "Edit Palette" button at the bottom, the colors in the Edit Palette dialog box from left to right correspond to the Color pop-up menu from top to bottom. So, the color in row one, column one of the Edit Palette dialog will be the first blank in the Color pop-up list. The color in the row one, column two will be the second color in the pop-up list and so forth.
I set the colors for a title in the Edit Palette and take a screen shot, then reference that while using the Color pop-up menu.
If your machine will boot 10.7.5, an alternative is to create a startup volume just for setting the colors and switch to 10.9.5 for finishing the disc.
-Warren

Text Mask Created in Motion Turns Grey When Imported Into Apple DVD Studio

I have some type that is a mask for a flame video that allows the flame to only be seen through the shapes of the letters. This is a black background with the type "punched out" to all the flames to be seen. When import this into Adobe DVD Studio Pro the black background of the masked type turns into a grey. What can I do to get the black appearance I need? Thanks!

Lets say the following is your square (just four words Top, Right, Bottom, Left)
The words Top, Right, Bottom, Left can all be on one Photoshop B&W pict file that is used as an overlay, all the words in black over a whit background for instance. Note however, that buttons (when you drag the button area) are limited in how they can be made so it may take a little bit of tinkering to get the button area to be over the particular section of the overlay properly and some designs may not work.
You can try other methods, succh as buttons over video, but the above is probably the easiest and most reliable way subject to design considerations

Using DVD Studio Pro theater template in Motion: Masking question

I'm wanting to use the video of the theater interior used in the DVD Studio Pro theater menu template in a Motion project. I'm wondering if there is a 'quick and dirty' way to mask out the black portion that appears when the curtains open, which is used as a 'drop zone' in the DVDSP menu (basically, wanting to get the same 'reveal' effect as I would get in DVDSP) or if I have to mask it frame by frame.
Thanks!

Yes...except that's what I tried with the curtain earlier today, and what I got was....very strange. Instead of the the transition of shape that I had keyed, I got what was essentially the final set of points moving and warping in a very strange pattern.
I'll try it again (and not be as anal and do every frame...try skipping to every second...or half second, so I don't go completely cold turkey).
Thanks...wanted to make sure I was correct in how I thought it should work. (the art of masking is the one thing that just does not want to sink into this pooh brain of mine...)

Dvd Studio Pro crashes whenever usuing a menu using motion video

Im using DVD Studio Pro 2 on a G5. Whenever I try to burn using either a menu template containing video or use a drop zone containing video, the software crashes.
I always use m2V video and ac3 audio created in FC4. Have tried usuing an existing file asset as my target with duration time set as well as separate imported files as the target. All imported assets are in the same folder
On burn, when it gets to the menu containing the video it crashes. If I remove the video from the menu its a smooth burn.
Any suggestions wouldbe greatly appreciated.

The same problem as Chad's happens to me when running the Chapter 6 tutorial in the Apple Pro Training Series (APTS) book for Motion 3: if you try to set the imported Motion project as a DVDSP background, DVDSP will crash every time.
Max Average's advice is 100% good with the downside being that you lose your ability to roundtrip. If you export your Motion DVD menu project as a standalone QT movie, it will drop in fine and still retains the loop point (a marker preset within Motion). Exporting with the Lossless+Alpha codec gave me the best image in the DVDSP simulator (over Animation+Alpha, Uncompressed 10-bit, and ProRes HQ).
I find roundtripping between FCS2 apps is a hit and miss affair and, generally, just export everything.

Creating a menu and overlay from Motion to DVD Studio Pro

I have created a menu in Motion. My menu plays a short video first before the menu choices come up. After sending it to DVD Studio Pro I noticed that when I burned it I could not access the menu options with my DVD player, only when I played it on my computer and used a mouse.
I tried creating an overlay and using that, but because my buttons do not display right away I am seeing one of the overlay icons right from the beginning.
If there is anyone out there with a suggestions on how I can fix this or create it differently so that I don't have these problems, please let me know!!!

Couple of things, first you need to make sure you assign navigation for the buttons, which is why the remote control on the DVD Player did not work, yet you can mouse over in the computer [Assign Navigation|http://dvdstepbystep.com/buttons07.php] and [a thread|http://discussions.apple.com/thread.jspa?messageID=9134310&#9134310]
As to overlays, buttons will not appear (the highlights) until the loop point of the menu, but if ellements are in the background (video) then they will appear. If you do not want those items (in the background) to appear to the loop point you need to fade it in or otherwise do whatever effect you want in the background video. [Motion Example|http://dvdstepbystep.com/motion.php]

DVD Studio Pro: Unwanted color inside menu fading transition

Hi,
I am not sure that my title is very clear…
I'd like to fade from menus to menus, made with Photoshop, adding a new element with each new menu.
It would work great if I had not a colour appearing in the middle of the fading…
All my menus have white background and text on it.
When I fade from one to another I get a grey background appearing at mid fading…
I can't find how I could get rid of that…
Do ou kow what happens ?
Thanks for your help
Eric
PS :
I use DVD Studio Pro 4

OK the background colours are set in Preferences.
(but are applied on next projects)

50% grey mask over menu in DVD Studio Pro

Similar Messages

Maybe you are looking for