DVD Studio Pro: Unwanted color inside menu fading transition

Hi,
I am not sure that my title is very clear…
I'd like to fade from menus to menus, made with Photoshop, adding a new element with each new menu.
It would work great if I had not a colour appearing in the middle of the fading…
All my menus have white background and text on it.
When I fade from one to another I get a grey background appearing at mid fading…
I can't find how I could get rid of that…
Do ou kow what happens ?
Thanks for your help
Eric
PS :
I use DVD Studio Pro 4

OK the background colours are set in Preferences.
(but are applied on next projects)

Similar Messages

Lion kills SoundTrack Pro, DVD Studio Pro and Color

After installing Lion on my cloned boot drive FCP 7.0.3 runs but SoundTrack pro, DVD Studio Pro and Color return an error message indicating Lion can't run PowerPC programs. They also have a white slashed circle over them indicating they aren't compatible.
This wasn't a widely advertised restriction of Lion prior to its release.
I'm thankful I have a fully operating Snow Leopard installation.

I don't know why you would have the PowerPC-only versions installed on an intel machine? It's very weird, because they should be Universal. This may mean that you were running those apps using Rosetta under Snow Leopard, but Rosetta isn't installed with Lion. You should just re-install from the FCS3 DVD and the proper Intel versions will be placed in your Applications folder.
I just launched every FCS3 app under Lion and they all work fine, except for Cinema Tools (which unexpectedly quit.)

Dvd studio pro Audio in Layered menu

Hi,
I'm finishing up a dvd project, and got stuck on this small issue...
I'm using a layered menu, with in it a layered psd file with background text and buttons. I need a layered menu so i can use my own graphics for buttons (overlay effects).
I want audio to loop while in the menu, but that doesn't seem to work??? Is it really only possible in a standard menu???
Thanks for any help!!

Welcome to the Boards
As you surmised no audio in layered menus.

Is it possible to export Final Cut Pro X or .MOV to DVD Studio Pro (Final Cut Studio)?

Is it possible to export Final Cut Pro X projects or .MOV to DVD Studio Pro (from Final Cut Studio v.3)? I'm using the free trial of Final Cut Pro X and later acquired a copy of Final Cut Studio (FCP 7, Compressor 3.5, DVD Studio Pro 4, Color 1.5, Motion 4, Soundtrack Pro 2).
I don't like the default DVD export in FCPX, so I would like to do it on DVD Studio Pro. Is it possible to export the project or the final .MOV file to DVD Studio Pro?
Additionally, can I use unfinished FCPX projects on FCP7?
Is it possible to export from FCPX to Compressor 3.5 (Final Cut Studio)?
Feedback would be greatly appreciated. As of this post, I have about 13 days left on my FCPX trial. Or would it just make sense to just use Final Cut Pro 7, since I have a permanent copy of it?
Thank you.
P.S. Where would be the best place to store projects or any other file related to Final Cut Studio or Final Cut Pro X? My MacBook Pro has 320GB built in storage (only 60GB available), and I have a 1TB external hard drive.
What is best to store on the Macintosh internal hard drive?
What is best to store on the external hard drive?

Yes you can make DVDs in DVDSP using video exported from FCPX.
There are some apps that will translate between X and 7- that said I would highly recommend not going back and forth as the translations are not 1:1 perfect.
I would recommend storing all Events and Projects on the External drive.
Compressor 3.5 will not accept exports directly from FCPX- you'll need Compressor 4 which is $49.
Totally up to you whether you want to make the jump to X. 7 is an EOL'ed program, meaning there will not be another version of that application. Final Cut Pro X is the version being actively developed now.

DVD Studio Pro Document won't open.

I have been working on a DVD menu in DVD Studio Pro. Every time I quit the project and open it up again it gives me the message that the document could not be opened. I have version 4.1.2. I have Snow Leopard 10.6.6. I have tried using DiskWarrior and reinstalling DVD Studio Pro. I have tried deleting the preferences but for some reasons when I go to harddrive then to Library, then to preferences there is no DVD studio pro preferences. The menu is pretty complex is includes Play, Producer's notes, Chapters, and Crew. Crew has 9 different menus. If there is anybody that knows how to fix this problem please reply. I don't want to do just do it all in one sitting which takes 3 hours. Thank you.

Funny name.
Is this your first DVDSP production?
Reinstalling Apple software almost never solves anything.
DiskWarrior only rebuilds a drive's directories and will not help in this situation, waste of time.
ore valuable, if DW doesn't do it for you is to repair permissions on the system drive.
Your prefs may be in another library, look in your user library and search for .plist using Spotlight set to include invisible files,.
Welcome to the family.
Does the file have a DVDSP icon on it? The proper extension? What happens if you right click on it and select DVDSP form the list of apps?
Try using Google to search for the error message, sometimes that turns up remarkably rich documentation from other users or from Apple's knowledge base articles.
Give us a few days, someone may drop in but traffic can be light on DVDSP forum.
bogiesan

DVD Studio Pro 4.1 color/menu/button issues

I just got the latest version of Final Cut Studio with DVD Studio Pro 4.1 and am having issues with menus and buttons. For some reason no matter what I do to the color settings my menus are always gray and the buttons never reflect the color changes I make. Am I missing something?

Hi - welcome to the discussions!
Could you be a little more specific here... for example, when you say the menus are always gray, do you mean when you use the menu editor or after you have built a disc? Button colours are set in several ways... what is the workflow that you are using?

Playback of DVD Studio Pro 4 built SD video file - Menu 1 screen is WHITE!!

I recently upgraded from FCP 4.5 with DVD Studio Pro 3 to FCS with DVD Studio 4. I have resolved a number of problems with the upgrade by reading "Apply Discussions", however, I need help with the following: When I import my mpeg2 and AC3 files into DVD SP4, I use the DVD SP4 palette to select an Apple Template for my MENU 1. (I like the "Theater Interior" menu template.) When I view the final product with the DVD SP4 simulator, everything is great including the colors in MENU 1. So, I build my program onto my desktop, the same way I did when I had DVD SP3. Now, the problem begins. When I view the built video TS file on my G5 Apple DVD player, or format it to a standard DVD-R with my pioneer 106D burner and play it back on my in-house DVD player, when the program MENU 1 is displayed on the monitor, it is WHITE in color. The menu is set to times out in 20 seconds. Once that happens, the programs runs perfectly. However, what's with the white menu screen? I can barely make out the buttons. When I click on a button, it operates and the color and program work perfectly from that point. I there an option to get rid of the white screen when the menu comes up? Somehow, when DVD SP4 builds the video file, MENU 1 is encoding with a white background rather than with the colors of the Apple template in use. This did not happen with DVD SP3. Can you help me?
Ugene

try switching the menu encoding from software to hardware (or vice versa) in your DVDSP preferences and see if that makes a difference for you.

Re DVD Studio Pro 4: help with color saturation

Re DVD Studio Pro 4: having trouble with the color saturation on the text of menu buttons. been using the same method for years, checked opacity of colors. All of a sudden, the text color is splotchy and looks unprofessional. Clients are complaining and I do not blame them. Any help?

This issue isn't external drives, it's the mini, and installing the program.
http://www.apple.com/finalcutstudio/dvdstudiopro/specs.html
The specs do not seem to require an internal superdrive.

How to import DVD Studio Pro Menu into Motion?

I would like to change the colors of one of the templates in DVD Studio Pro. In particular the .psd menu file. Is there a way to import the .psd file into Motion and change the color. Or maybe there is an easier way of doing this. Any help would be appreciated.

Yes you can. You can import a Motion project file directly into DVD Studio Pro, though when I tried it took a loooooong time (depends on the size and complexity of the project of course). Here's a tutorial on how to do that:
http://www.wonderhowto.com/how-to-use-dvd-studio-pro-4-with-motion-53426/
OR... you can just export your Motion project and import it into DVD SP as a Quicktime file, and put that in the Menu section. Then you can add your buttons and so forth and proceed from there.
I hope this helps. Good luck!

Color corrections don't get processed when burned in DVD Studio Pro

I am working on an FCP project that has alot of darkened day for night clips. I export using compressor at best quality, and project looks great in viewer in DVD Studio Pro, but for some reason when I burn the final DVD and watch it, all the darkness changes are gone, and the footage is in it's original state. What is causing this? How can I burn a DVD that looks like what I am exporting?? Other thing is that when I burn a quicktime of the same project to a DVD using toast, the color changes remain, and they look more accurate- I thought Quicktime would be lower quality than Compressor?

I have acutaly been using this technique on a recent project, and have a few additional observations:
One is that, even if you use a black background in your menu, and map your button colors to black, not all players generate the overlay colors the same way, and the black patches sometimes appear lighter then the background, particularly on software players, since computers are generating RGB vs. YUV.
Another detail is that when a button is activated, the overlays disappear, and all the button graphics embedded in the background are visible while the player switches to the new menu. I have however used the following workaround for this: Generally players will display a freeze frame of the background of the menu while switching to the jump target, usually the first frame or loop point of a menu with motion assets. By creating each menu as an animation where the buttons fade up in the first few frames, I can create a "clean" background for use as the freeze frame displayed during the switch.
This particular disc hhas a tight bit budget, and lots of menus, and so I am creating very short motion assets (1 second) and setting them to "still" at end. I haven't acutally checked this on a player yet, to see whter the still or the beginning of the asset gets used as the freeze frame, I'll post back with the answer after I have tested it.

50% grey mask over menu in DVD Studio Pro

Hi everyone,
I have created a new menu onto an existing DVD project. The new menu has a 50% haze over it, something like a mask. I can temporarily get rid if it if I go to VIEW / DISPLAY STATUS / BACKGROUND but after the next operation it goes back to the mask. I've compared its settings to other menus on the same project and they are the same. I've also taken the project to another computer with DVD Studio Pro and the same issues occurs.
If some could suggest a solution I'd be very grateful.

Drew, if you send them back when they guess wrong without letting them select 4 times they'll be able to figure out the code through process of elimination pretty quick...
A typical method for this is to add one to a register on the correct button press. After the 4th if the register equals 4 goto the secret stuff and if not go to the begining (clear registers) and start again or to another asset saying failed or whatever...
Not too complex.
Code: 1, 3, 5, 0
Menu1: All buttons link to Menu2 except button 1 which jumps to a script, adds 1 to a GPRM and then jumps to menu2.
Menu2: All buttons link to Menu3 except button 3 which jumps to a script, adds 1 to a GPRM and then jumps to menu3.
Menu3: All buttons link to Menu4 except button 5 which jumps to a script, adds 1 to a GPRM and then jumps to menu4.
Menu4: All buttons link to a check register value script except button 0 which jumps to a script, adds 1 to a GPRM and then jumps to the check register script,
The check register script just needs to check the register value, send users where they are allowed to go and make sure you clear the register somewhere,
-Jake

DVD studio pro menu

Are you able to create a dvd style menu for a cd project that plays video from DVD studio pro?

You might want explain exactly what you are trying to do.
DVD SP creates DVDs, not CDs.
I really don't understand your question.

Dvd Studio Pro crashes whenever usuing a menu using motion video

Im using DVD Studio Pro 2 on a G5. Whenever I try to burn using either a menu template containing video or use a drop zone containing video, the software crashes.
I always use m2V video and ac3 audio created in FC4. Have tried usuing an existing file asset as my target with duration time set as well as separate imported files as the target. All imported assets are in the same folder
On burn, when it gets to the menu containing the video it crashes. If I remove the video from the menu its a smooth burn.
Any suggestions wouldbe greatly appreciated.

The same problem as Chad's happens to me when running the Chapter 6 tutorial in the Apple Pro Training Series (APTS) book for Motion 3: if you try to set the imported Motion project as a DVDSP background, DVDSP will crash every time.
Max Average's advice is 100% good with the downside being that you lose your ability to roundtrip. If you export your Motion DVD menu project as a standalone QT movie, it will drop in fine and still retains the loop point (a marker preset within Motion). Exporting with the Lossless+Alpha codec gave me the best image in the DVDSP simulator (over Animation+Alpha, Uncompressed 10-bit, and ProRes HQ).
I find roundtripping between FCS2 apps is a hit and miss affair and, generally, just export everything.

Creating a menu and overlay from Motion to DVD Studio Pro

I have created a menu in Motion. My menu plays a short video first before the menu choices come up. After sending it to DVD Studio Pro I noticed that when I burned it I could not access the menu options with my DVD player, only when I played it on my computer and used a mouse.
I tried creating an overlay and using that, but because my buttons do not display right away I am seeing one of the overlay icons right from the beginning.
If there is anyone out there with a suggestions on how I can fix this or create it differently so that I don't have these problems, please let me know!!!

Couple of things, first you need to make sure you assign navigation for the buttons, which is why the remote control on the DVD Player did not work, yet you can mouse over in the computer [Assign Navigation|http://dvdstepbystep.com/buttons07.php] and [a thread|http://discussions.apple.com/thread.jspa?messageID=9134310&#9134310]
As to overlays, buttons will not appear (the highlights) until the loop point of the menu, but if ellements are in the background (video) then they will appear. If you do not want those items (in the background) to appear to the loop point you need to fade it in or otherwise do whatever effect you want in the background video. [Motion Example|http://dvdstepbystep.com/motion.php]

Layered Menu like Apple's DVD Studio Pro

I'm trying to find out if you can create layered menu's like you can in DVD Studio Pro? I don't want to use highlights or subpicture, but a rollover image created in Photoshop.

Yes, you can create layered menus.
I find doing it in Photoshop best.
http://help.adobe.com/en_US/encore/cs/using/WS2C3F3ABD-6457-4ca0-898F-720B7E3D0C10.html
But DVDs use highlghts, with their limitations, so I wonder what you intend? Are you doing bluray?

DVD Studio Pro: Unwanted color inside menu fading transition

Similar Messages

Maybe you are looking for