500 internal server error in EPMA and Calc manager in 11.1.2.1
We are getting the below errors in EPMA log and Calc Manager log and unable to determine the cause of it. It seems like this particular issue was cause while deploying a calc manager rule for an HFM app. The issue resolved itself and the errors went away after about an hour. We have gotten the below error frequently in the last 3 weeks or so after having more activity lately in the environment. Any help is greatly appreciated.
[2011-11-15T19:53:40.773-05:00] [EpmaWebReports0] [WARNING] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 193] [userId: <anonymous>] [ecid: 0000JEdrMiiBt12LvqT4iX1Ek^ZE0000^U,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] exception: <BpmResponse type='error'><actor>none</actor><code>org.apache.axis.AxisFault</code><desc>(500)Internal Server Error</desc><trace>com.hyperion.awb.web.repository.FileRepository.getElement(Unknown Source)[[
com.hyperion.awb.web.repository.Action.getWorkbenchElement(Unknown Source)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
Exception org.apache.axis.AxisFault rethrown
</trace></BpmResponse>
[2011-11-15T19:53:40.773-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 193] [userId: <anonymous>] [ecid: 0000JEdrMiiBt12LvqT4iX1Ek^ZE0000^U,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - end
[2011-11-15T19:53:40.773-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 193] [userId: <anonymous>] [ecid: 0000JEdrMiiBt12LvqT4iX1Ek^ZE0000^U,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - end
[2011-11-15T19:54:12.852-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdrU^fBt12LvqT4iX1Ek^ZE0000^W,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - start
[2011-11-15T19:54:12.852-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdrU^fBt12LvqT4iX1Ek^ZE0000^W,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - start
[2011-11-15T19:54:12.852-05:00] [EpmaWebReports0] [WARNING] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdrU^fBt12LvqT4iX1Ek^ZE0000^W,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] errMessage1: (500)Internal Server Error
[2011-11-15T19:54:12.852-05:00] [EpmaWebReports0] [WARNING] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdrU^fBt12LvqT4iX1Ek^ZE0000^W,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] errMessage2: (500)Internal Server Error
[2011-11-15T19:54:12.852-05:00] [EpmaWebReports0] [WARNING] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdrU^fBt12LvqT4iX1Ek^ZE0000^W,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] exception: <BpmResponse type='error'><actor>none</actor><code>org.apache.axis.AxisFault</code><desc>(500)Internal Server Error</desc><trace>com.hyperion.awb.web.repository.FileRepository.getElement(Unknown Source)[[
com.hyperion.awb.web.repository.Action.getWorkbenchElement(Unknown Source)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
Exception org.apache.axis.AxisFault rethrown
</trace></BpmResponse>
[2011-11-15T19:54:12.852-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdrU^fBt12LvqT4iX1Ek^ZE0000^W,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - end
[2011-11-15T19:54:12.852-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdrU^fBt12LvqT4iX1Ek^ZE0000^W,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - end
[2011-11-15T20:19:30.146-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdxGxUBt12LvqT4iX1Ek^ZE0000^l,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - start
[2011-11-15T20:19:30.146-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdxGxUBt12LvqT4iX1Ek^ZE0000^l,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - start
[2011-11-15T20:19:30.146-05:00] [EpmaWebReports0] [WARNING] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdxGxUBt12LvqT4iX1Ek^ZE0000^l,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] errMessage1: (500)Internal Server Error
[2011-11-15T20:19:30.146-05:00] [EpmaWebReports0] [WARNING] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdxGxUBt12LvqT4iX1Ek^ZE0000^l,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] errMessage2: (500)Internal Server Error
[2011-11-15T20:19:30.146-05:00] [EpmaWebReports0] [WARNING] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdxGxUBt12LvqT4iX1Ek^ZE0000^l,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] exception: <BpmResponse type='error'><actor>none</actor><code>org.apache.axis.AxisFault</code><desc>(500)Internal Server Error</desc><trace>com.hyperion.awb.web.repository.FileRepository.getElement(Unknown Source)[[
com.hyperion.awb.web.repository.Action.getWorkbenchElement(Unknown Source)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
Exception org.apache.axis.AxisFault rethrown
</trace></BpmResponse>
[2011-11-15T20:19:30.146-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdxGxUBt12LvqT4iX1Ek^ZE0000^l,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - end
[2011-11-15T20:19:30.146-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdxGxUBt12LvqT4iX1Ek^ZE0000^l,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - end
[2011-11-15T20:21:17.005-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 193] [userId: <anonymous>] [ecid: 0000JEdxf5pBt12LvqT4iX1Ek^ZE0000^n,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - start
[2011-11-15T20:21:17.005-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 193] [userId: <anonymous>] [ecid: 0000JEdxf5pBt12LvqT4iX1Ek^ZE0000^n,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - start
[2011-11-15T20:21:17.005-05:00] [EpmaWebReports0] [WARNING] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 193] [userId: <anonymous>] [ecid: 0000JEdxf5pBt12LvqT4iX1Ek^ZE0000^n,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] errMessage1: (500)Internal Server Error
[2011-11-15T20:21:17.005-05:00] [EpmaWebReports0] [WARNING] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 193] [userId: <anonymous>] [ecid: 0000JEdxf5pBt12LvqT4iX1Ek^ZE0000^n,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] errMessage2: (500)Internal Server Error
[2011-11-15T20:21:17.005-05:00] [EpmaWebReports0] [WARNING] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 193] [userId: <anonymous>] [ecid: 0000JEdxf5pBt12LvqT4iX1Ek^ZE0000^n,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] exception: <BpmResponse type='error'><actor>none</actor><code>org.apache.axis.AxisFault</code><desc>(500)Internal Server Error</desc><trace>com.hyperion.awb.web.repository.FileRepository.getElement(Unknown Source)[[
com.hyperion.awb.web.repository.Action.getWorkbenchElement(Unknown Source)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
Exception org.apache.axis.AxisFault rethrown
</trace></BpmResponse>
[2011-11-15T20:21:17.005-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 193] [userId: <anonymous>] [ecid: 0000JEdxf5pBt12LvqT4iX1Ek^ZE0000^n,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - end
[2011-11-15T20:21:17.005-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 193] [userId: <anonymous>] [ecid: 0000JEdxf5pBt12LvqT4iX1Ek^ZE0000^n,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - end
[2011-11-15T20:21:28.005-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 193] [userId: <anonymous>] [ecid: 0000JEdxhlhBt12LvqT4iX1Ek^ZE0000^p,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - start
[2011-11-15T20:21:28.005-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 193] [userId: <anonymous>] [ecid: 0000JEdxhlhBt12LvqT4iX1Ek^ZE0000^p,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - start
[2011-11-15T20:21:28.005-05:00] [EpmaWebReports0] [WARNING] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 193] [userId: <anonymous>] [ecid: 0000JEdxhlhBt12LvqT4iX1Ek^ZE0000^p,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] errMessage1: (500)Internal Server Error
[2011-11-15T20:21:28.005-05:00] [EpmaWebReports0] [WARNING] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 193] [userId: <anonymous>] [ecid: 0000JEdxhlhBt12LvqT4iX1Ek^ZE0000^p,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] errMessage2: (500)Internal Server Error
[2011-11-15T20:21:28.005-05:00] [EpmaWebReports0] [WARNING] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 193] [userId: <anonymous>] [ecid: 0000JEdxhlhBt12LvqT4iX1Ek^ZE0000^p,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] exception: <BpmResponse type='error'><actor>none</actor><code>org.apache.axis.AxisFault</code><desc>(500)Internal Server Error</desc><trace>com.hyperion.awb.web.jobstask.Service.enumJobs(Unknown Source)[[
com.hyperion.awb.web.jobstask.Action.getJobsElement(Unknown Source)
sun.reflect.GeneratedMethodAccessor913.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
Exception org.apache.axis.AxisFault rethrown
</trace></BpmResponse>
[2011-11-15T20:21:28.005-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 193] [userId: <anonymous>] [ecid: 0000JEdxhlhBt12LvqT4iX1Ek^ZE0000^p,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - end
[2011-11-15T20:21:28.005-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 193] [userId: <anonymous>] [ecid: 0000JEdxhlhBt12LvqT4iX1Ek^ZE0000^p,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - end
[2011-11-15T20:23:46.176-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.DIMEDITOR.com.hyperion.awb.web.dimeditor.Action] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdyFa0Bt12LvqT4iX1Ek^ZE0000^t,0] [SRC_CLASS: com.hyperion.awb.web.dimeditor.Action] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: loadAdf] Inside awb dimeditor
[2011-11-15T20:23:46.614-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdyFgqBt12LvqT4iX1Ek^ZE0000^u,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - start
[2011-11-15T20:23:46.614-05:00] [EpmaWebReports0] [NOTIFICATION] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdyFgqBt12LvqT4iX1Ek^ZE0000^u,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] getXml() - start
[2011-11-15T20:23:46.614-05:00] [EpmaWebReports0] [WARNING] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdyFgqBt12LvqT4iX1Ek^ZE0000^u,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] errMessage1: (500)Internal Server Error
[2011-11-15T20:23:46.614-05:00] [EpmaWebReports0] [WARNING] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdyFgqBt12LvqT4iX1Ek^ZE0000^u,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] errMessage2: (500)Internal Server Error
[2011-11-15T20:23:46.614-05:00] [EpmaWebReports0] [WARNING] [] [oracle.EPMAWT.CORE.com.hyperion.awb.web.common.BaseServiceException] [tid: 200] [userId: <anonymous>] [ecid: 0000JEdyFgqBt12LvqT4iX1Ek^ZE0000^u,0] [SRC_CLASS: com.hyperion.awb.web.common.DimensionServiceException] [APP: EPMAWEBTIER#11.1.2.0] [SRC_METHOD: getXml] exception: <BpmResponse type='error'><actor>none</actor><code>org.apache.axis.AxisFault</code><desc>(500)Internal Server Error</desc><trace>com.hyperion.awb.web.dimeditor.Service.enumDimensionsAndFolders(Unknown Source)[[
com.hyperion.awb.web.dimeditor.Action.getChildNodes(Unknown Source)
sun.reflect.GeneratedMethodAccessor257.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
Exception org.apache.axis.AxisFault rethrown
</trace></BpmResponse>
]]
Have you tried reconfiguring the web server?
HTH-
Jasmine.
Similar Messages
-
500 internal server error on Oracle 10g Enetrprise Manager
Hi All,
I have iinstalled Oracle 10g on windows xp. In Enterprise Manager, I receive the error below when I click on the startup button on the database control Home page:
500 Internal Server Error
java.lang.NullPointerException
at oracle.sysman.emo.adm.instance.changeState.ChangeStateObject.setDbUserPassword(ChangeStateObject.java:335)
at oracle.sysman.emo.adm.instance.changeState.ChangeStateObject.setSecretPassword(ChangeStateObject.java:1971)
at oracle.sysman.eml.creds.CredsUtil.loadCreds(CredsUtil.java:1223)
at oracle.sysman.emSDK.creds.CredsBean.loadCreds(CredsBean.java:544)
at oracle.sysman.emSDK.creds.DBCredsBean.loadCreds(DBCredsBean.java:260)
at oracle.sysman.emSDK.creds.DBComboCredsBean.loadCreds(DBComboCredsBean.java:208)
at oracle.sysman.emSDK.creds.CredsBean.initCreds(CredsBean.java:118)
at oracle.sysman.emSDK.creds.DBCredsBean.initCreds(DBCredsBean.java:91)
at oracle.sysman.db.adm.inst.ChangeStateController.getChangeStateObject(ChangeStateController.java:385)
at oracle.sysman.db.adm.inst.ChangeStateController.getBean(ChangeStateController.java:342)
at oracle.sysman.db.adm.inst.ChangeStateController.getOperationsPage(ChangeStateController.java:168)
at oracle.sysman.db.adm.inst.ChangeStateController.getDefaultPage(ChangeStateController.java:292)
at oracle.sysman.db.adm.inst.ChangeStateController.onEvent(ChangeStateController.java:437)
at oracle.sysman.db.adm.DBController.handleEvent(DBController.java:2163)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:376)
at oracle.sysman.db.adm.DBControllerResolver.handleRequest(DBControllerResolver.java:115)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:688)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:291)
at oracle.sysman.eml.app.Console.doGet(Console.java:246)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:101)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:131)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:223)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
Does anyone know why this is so ans how to fix it?
Thanks.Just tried it here and received the usual login screen....
Thank you,
Tony Miller
LuvMuffin Software
Ruckersville, VA -
Youtube 500 internal server error
I recently installed all available updates on my computer.
When I click to watch a video clip on youtube I get the error message "500 internal server error" followed by the dialogue below:
500 Internal Server Error
Sorry, something went wrong.
A team of highly trained monkeys has been dispatched to deal with this situation.
If you see them, show them this information:
kCAPjX8Y_a6ohrYg_SGJtRmNmEO2qzVw4Yy75YO1gGCZMSvLxnBb-fnfrD4r HvdENPervi7VbjCpS4EGHALWVPeFTCuhDa4e3Z9TdY_xyq3ga_RAdU9ckM1u r3SyF3ifDsA8gg1VAXnSliZFt3sutZPykazw6ma_BVtujOR2bOzq7p5ofZDO Nf8fl3dcuyRQIFwDsOzukt0ViHzmVDltEJzua3D4KN46IGw2Tux8_6zl1Ddu ctU03ILPRt73gUqnJldxVqKJMzhi5ZQ-6FVghgEHksFtGtyRAcsg5z_PZJAl emkrRqrB0RyRILGf0ZDznqAB5G0S0lWTVB_Doe8qOEbQQyH5MUTXz6MQ7WXb L-e35x0l2DM1qvcjYonPVjVAUsDirEDGB_IDQXnggDC-nW82gLh5ZYccxRkz bfwSXgEYO376J6mdzFD_Cd5PJ4eE1adHmjUzdTWd4RKKeLjV6OkVbrApSCpN U7ALVG9trY76W_1mBPiIOmkYyTTplzV9SL2OYLWNJpUz-tC_bbI4zv8dxbjp HVs0Urf-uADBs9orJffw7eatDAst7Ca5iGIdR8ubKLK634itr75l4HU1aQwC FVb0LuS7tc-mzgfCPFSWYk-uuS1YRRJsT57ZUT4YAFMuncdY0_3Qb5mps1Mh 0XzWE1NG5ki5wSxjlfQaGRprXC183VwD-Da6Vo9T9Jfgd31mYBY9KqcPbg_d JOM2uxfMmimSA7UcPnTsFxcIME9JaU_FVUMC11HRPDjEyunBIrC-Wbsrm64_ x1DGEfBKRpMg6cEZ0GB07ILU6iDkNtHNBHCGnyHrUaGN5DVIeI64adj82RgY D5_8teZWhdXhfmgzG6aZ3qufoc6AmJvhjWbk0xEuTmOKLB-Gkl9PmveX4HHq AqkZoFT67srACKWQWGHdVCQgzm4fmmF7-NisXd8kajlHS49mumIIcOnv1Equ 2PbtpGrOK4beBeVuTrer7SwxDRhgxOobKG2iZXfDhXDfXnRPyVsKVKVEVwW3 2x6z0OyNYg2tBSw24ICmFAj9V2F1vmhaLLW9YpbJ67BPNa0qUGXOaYwOZFt7 nlqq8G3eNPKOPe9rYvRnu7_AMI7jGOZku8EKcXM_kqWIxY4J9abqfO3P1dQz aWD2FYOoUDHzrlKkz5U7IpZ3zuVY5GCHXjg_Ywa8jagTfa70CRmAK2faUvUX 4T6ukEd63CcGc_sJvp6MbbBJBxBrJ5tQqMwZ-KLdAv1gDINd-e8V6xAtvede NJtnC0oVogalA1RKo_m2EHjCr8_ANxBDTuCzO59ffKpoU_K6ewAiMBpKzgtf YTuKGeTAbqRsRjJqQSMMYAyn9Pezo-JTNmBseZdONQRQBokKK3WCut1BetC- fyYizZuQhQi1cQu9Rw-5V8O9_D9Z84DJ6_kN17SCeij1Fh240ngZF94-X5AG OyIzWksx8zyCSQZtKGmUReIIi5TsHqlQ_GYx4ivYrhseMfvRoMBq6FHMAZbJ qBMv7v6KtRP5vHdDwPbH-H2EAZBK4Aj_z8z4j-Gwyhp-xNj87HVqdmrnw5dY uaBK2b4p-zw944oB1NxK-0mKEhCjWHP4eHFMlEfkEFu5o-FlT_BjsAGDPkSw ngnLYXiE2aRG2EGQe6XvE8L3PTkG3jvg_4YMAe7rrB1ukBxotudqW0RjzxYw fHLmBCdxbzLwF3vUYolrDYJXp7CuGh2hVNtVZzSy2LfGnvaMmiQgfKStlNDu ApiMlOy9fOT52Fr8VAINpnc81UC8xPQcnUTVXjmZQYDPeL64sJ9abCDE-o8E ZRhwrk_lbmTZvtoEyKjABYBm8JXwcHfW5g-Lu4ihrilE9Zn4tu36ZpDORc3D c7ppXbR9onk445q-BvRxEhgwwvQkm0KvPQMngwv0514T-nssdBj8t6T-zsMc -xVaficWkh7bhSH_G7yVqSKa8mLsB5oXwcrvBEgEu8sO7qe3b6jtmd_VV4yF oZnYKstDwJlNuk-2gzZkOVlQ-g-bo6ccljuFZAFx3D1rEBVRsq9iFV5rKjiK kGNoDa5slABchN3LtwUEmwUe8umQtJ2wyLLoGZAyIznNJeiPD7BYKK_iJujS eG5YwA0CNBIoAif_gpaLNvQ=
youtube is running okay as normal from my PC at work.
currently running osx version 10.8.2
processor 2 GHz Intel Core i7
memory 8 GB 1600 MHz DDR3
Any ideas on how I can overcome the 500 internal server error on youtube and resume watching video clips from the website?all sorted.
reset safari did the trick. -
Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev KumarDuplicate thread:
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi
I am unable to access Reports and Analytics . It throws a Error 500 -Internal Server Error when I click on browse catelog button on Reports and Analytics in Fusion
I have all the required roles and also BIADMINISTRATOR ACCESS still I am unable to login to Reports and Analytics. I have cleared the cache also.
My collegue who has the same roles is able to access it.
Regards
AvinashI created the showModule.xhtml in the web.view.module\src\main\resources folder and test the application and Now I'm getting the error in both deployment ways.
a) Local deployment: Same result
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
b) Remote server:
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
Please check the below screenshots for the mappings captured in the properties window.
http://imageshack.us/photo/my-images/5/srwebviewmodule.png/
http://imageshack.us/photo/my-images/811/eclipseexplorer.png/
http://imageshack.us/photo/my-images/521/cdiandrichfacesear.png/
http://imageshack.us/photo/my-images/90/cdiandrichfaces.png/
Thanks,
Vijaya -
Sip 503 service unavailable and sip 500 internal server error
Hi guys,could any one help me in the following.
ITSP-->Voice gateway configured as CUBE-->CUCM-->UCCX
I am moving a system from cme and aa enviroment to cucm and uccx
The VGW is configured as CUBE and also is added as h323 gateway on cucm.
When i tested the debug ccsip messages shows
Sip 503 service unavailable or
sip 500 internal server error.
I can't now provide any debugs cause i am not on site,only on Saturday.
As i read in previous discussion that could be the bind source address problem but i had this configured.
Also i tried to configure the gateway instead of h232 to use sip trunk from cucm,but after this the incoming calls didn't even reach the router,the debug ccsip messages showed nothing.
For now can any one advice me to what these 2 errors related to.
What could be missing?
Thanks in advance.Hi there : can some one explain the reason that i am getting this sip error with itsp:
here is the debug of ccsip messages:
Received:
INVITE sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
Call-ID: isbc6994325518768294927-1385194135-11717
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To:
CSeq: 1 INVITE
Min-SE: 90
Session-Expires: 3600;refresher=uac
Contact:
Allow: INVITE,CANCEL,BYE,ACK,REFER,UPDATE,INFO,PRACK
Supported: timer,100rel
Diversion: [email protected]>;privacy=off;screen=no;reason=unknown,[email protected]>;privacy=off;screen=no;reason=unknown
Max-Forwards: 70
User-Agent: VCS 5.8.2.56-03
Content-Length: 394
Content-Type: application/sdp
v=0
o=- 87852 198805 IN IP4 188.254.68.67
s=SBC call
c=IN IP4 188.254.68.67
t=0 0
m=audio 23682 RTP/AVP 8 0 18 98 96 97 101
a=rtpmap:98 G.729a/8000
a=rtpmap:96 G.729ab/8000
a=rtpmap:97 G.729b/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=fmtp:18 annexb=no
a=ptime:10
a=X-vrzcap:vbd Ver=1 Mode=FaxPr ModemRtpRed=0
a=X-vrzcap:identification bin=DSR2866 Prot=mgcp App=MG
00:43:23: //11/FDB448CE8020/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To:
Date: Sat, 23 Nov 2013 08:06:29 GMT
Call-ID: isbc6994325518768294927-1385194135-11717
CSeq: 1 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
00:43:23: //11/FDB448CE8020/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 503 Service Unavailable
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To:
c2801#er=phone>;tag=27BA64-1DAE
Date: Sat, 23 Nov 2013 08:06:29 GMT
Call-ID: isbc6994325518768294927-1385194135-11717
CSeq: 1 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Reason: Q.850;cause=38
Content-Length: 0
00:43:23: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
Call-ID: isbc6994325518768294927-1385194135-11717
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To: ;tag=27BA64-1DAE
CSeq: 1 ACK
Max-Forwards: 70
Content-Length: 0
show run:
voice service voip
ip address trusted list
ipv4 87.226.136.164 255.255.255.255
ipv4 172.16.24.0 255.255.255.0
ipv4 188.254.68.66 255.255.255.255
ipv4 188.254.68.67 255.255.255.255
ipv4 188.254.69.66 255.255.255.255
ipv4 188.254.69.67 255.255.255.255
ipv4 46.38.52.68 255.255.255.255
address-hiding
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
redirect ip2ip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback cisco
sip
voice class codec 1
codec preference 1 g729br8
codec preference 2 g729r8
codec preference 3 g711alaw
codec preference 4 g711ulaw
voice class codec 2
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
codec preference 4 g729br8
voice translation-rule 1
rule 1 /XXX5397962/ /1999/
voice translation-rule 2
rule 1 /XXX55317577/ /1999/
voice translation-rule 3
rule 1 /5555317884/ /1999/
voice translation-profile ROS
translate called 1
voice translation-profile ROS2
translate called 2
voice translation-profile ROS3
translate called 3
interface FastEthernet0/0
ip address 178.208.129.221 255.255.255.248
ip access-group INBOUND in
no ip unreachables
ip verify unicast reverse-path
ip nat outside
ip inspect IPFW in
ip inspect IPFW out
ip virtual-reassembly in
duplex auto
speed auto
no cdp enable
interface FastEthernet0/1
no ip address
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface FastEthernet0/1.1
encapsulation dot1Q 1 native
ip address 10.110.0.200 255.255.255.0
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/1.2
encapsulation dot1Q 2
ip address 172.16.24.254 255.255.255.0
ip nat inside
ip virtual-reassembly in
h323-gateway voip interface
h323-gateway voip bind srcaddr 172.16.24.254
ip dns server
ip nat inside source list NAT interface FastEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 178.208.X.X
ip route 192.168.0.0 255.255.0.0 Null0 254
sccp local FastEthernet0/1.2
sccp ccm 172.16.24.101 identifier 1 version 7.0
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register XCODE123456
keepalive retries 1
keepalive timeout 10
switchover method immediate
switchback method immediate
dspfarm profile 1 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 6
associate application SCCP
dial-peer voice 10000 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS
destination-pattern 74955397962
session protocol sipv2
session target ipv4:87.226.136.164
session transport udp
incoming called-number XXXX5397962
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10010 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS2
destination-pattern XXX55317577
session protocol sipv2
session target ipv4:87.226.136.164
session transport udp
incoming called-number 75555317577
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10020 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS3
preference 1
destination-pattern 5555317884
session protocol sipv2
session target ipv4:188.254.68.66
session transport udp
incoming called-number 5555317884
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10021 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS
preference 2
destination-pattern 5555317884
session protocol sipv2
session target ipv4:188.254.69.66
session transport udp
incoming called-number 5555317884
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 2 voip
tone ringback alert-no-PI
description to CUCM_PUB
destination-pattern 1...
session target ipv4:172.16.24.101
voice-class codec 2
dtmf-relay rtp-nte
I see in the debug that the itsp over g729 family codecs but not g711 at all
This system was working with this dialpeers before with same provider ,just i have added the dial-peer 2 .
I have changed the codec to match what is offered by itsp but no difference,still getting the same message.
PLZ help ASAP. -
i have developed a very small web service and which is hosted along with our web site. our webservice url is
http://www.bba-reman.com/Search/SearchDataIndex.asmx
web service code
namespace WebSearchIndex
#region SearchDataIndex
/// <summary>
/// SearchDataIndex is web service which will call function exist in another library for part data indexing
/// </summary>
[WebService(Namespace = "http://tempuri.org/")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
[System.ComponentModel.ToolboxItem(false)]
// To allow this Web Service to be called from script, using ASP.NET AJAX, uncomment the following line.
// [System.Web.Script.Services.ScriptService]
public class SearchDataIndex : System.Web.Services.WebService
//public AuthHeader ServiceAuth=null;
public class AuthHeader : SoapHeader
public string Username;
public string Password;
#region StartIndex
/// <summary>
/// this function will invoke CreateIndex function of SiteSearch module to reindex the data
/// </summary>
[WebMethod]
public string StartIndex(AuthHeader auth)
string strRetVal = "";
if (auth.Username == "Admin" && auth.Password == "Admin")
strRetVal = SiteSearch.CreateIndex(false);
else
SoapException se = new SoapException("Failed : Invalid credentials",
SoapException.ClientFaultCode,Context.Request.Url.AbsoluteUri,new Exception("Invalid credentials"));
throw se;
return strRetVal;
#endregion
#endregion
when i was calling that web service from my win apps using
HttpWebRequest
class then getting error The remote server returned an error: (500) Internal Server Error
here is code of my win apps from where i am calling web service
string strXml = "";
strXml = "<s:Envelope xmlns:s='http://schemas.xmlsoap.org/soap/envelope/'><s:Body><StartIndex xmlns='http://tempuri.org/' xmlns:i='http://www.w3.org/2001/XMLSchema-instance'><auth><Username>joy</Username><Password>joy</Password></auth></StartIndex></s:Body></s:Envelope>";
string url = "http://www.bba-reman.com/Search/SearchDataIndex.asmx";
HttpWebRequest req = (HttpWebRequest)WebRequest.Create(url);
req.Method = "POST";
req.ContentType = "text/xml";
req.KeepAlive = false;
req.ContentLength = strXml.Length;
StreamWriter streamOut = new StreamWriter(req.GetRequestStream(), System.Text.Encoding.ASCII);
streamOut.Write(strXml);
streamOut.Close();
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
string strResponse = streamIn.ReadToEnd();
streamIn.Close();
i am just not being able to understand when this line execute
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
then getting the error The remote server returned an error: (500) Internal Server Error
not being able to understand where i made the mistake. mistake is in the code of web service end or in calling code?
help me to fix this issue. thanksHi Mou,
I just tried your win app code about calling web service, but failed. I got the 500 error after I called your service:
The error message I quoted from Fiddler:
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><faultcode>soap:Client</faultcode><faultstring>System.Web.Services.Protocols.SoapException: Failed : Invalid credentials ---> System.Exception: Invalid credentials
--- End of inner exception stack trace ---
at BBAReman.WebSearchIndex.SearchDataIndex.StartIndex(AuthHeader auth)</faultstring><faultactor>http://www.bba-reman.com/Search/SearchDataIndex.asmx</faultactor><detail /></soap:Fault></soap:Body></soap:Envelope>
I am not totally sure that error occurred by the authentication. But I suggest you can try to add this service into your project using this method below:
1.right click the Reference and select Add Service Reference
2.input your service link and click "Go"
And you can use this service as the following:
private async void callService()
ServiceReference1.SearchDataIndexSoapClient client =new ServiceReference1.SearchDataIndexSoapClient();
var Str= await client.StartIndexAsync(new ServiceReference1.AuthHeader { Username = "Admin", Password = "Admin" });
Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I am receiving 2 errors 500 internal server error nginx and 404 internal server error nginx
I also cannot go from and email message in outlook to the youtube website nor can I get youtube.com to come up. That page gives me a 404 internal server error nginx. Until the last few days I have been able to get to you tube and have not received these errors.
Which security software (firewall, anti-virus) do you have?
Some have been reported to cause these errors.<br />
Panda anti virus may cause the 404 internal server error nginx<br />
I can't remember which software can be causing the 500 internal server error, but it is usually caused by security software adding a proxy to monitor internet traffic -
Windows Azure Pack setup - 500 Internal Server Error - failed to configure databases and services
Hi,
I am trying to setup the Windows Azure pack to use the site to configure the Service bus 1.1 installation. When I try to configure the Windows Azure Pack I get the following error:
Admin Authentication Site
500 Internal Server Error - Failed to configure databases and services: Object reference not set to an instance of an object.
I'm not sure where the logs are to see what is causing this error. I have tried running as admin, running as a different user with no luck.
thanks,
Georgi
GeorgiHere's what I'm getting for this error:
Log Name: Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite/Operational
Source: Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite
Date: 3/27/2014 12:52:03 PM
Event ID: 103
Task Category: (65431)
Level: Error
Keywords: None
User: CLINICALSYSTEMS\Administrator
Computer: SERVER-PC.clinicalsystems.com
Description:
##### Application_Error: Exception=System.Web.HttpException (0x80004005): Failed to configure databases and services: Object reference not set to an instance of an object. ---> System.Management.Automation.CmdletInvocationException: Object reference not
set to an instance of an object. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.AddUserToGroup(GroupPrincipal group, UserPrincipal user)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureDefaultTrusts()
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureClaimSecurity(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureCore(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.FeatureConfigurer.Configure(Hashtable settings)
at Microsoft.WindowsAzure.Server.PowerShell.Common.BaseCmdlet.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.PSClient.RunCommand(Command command)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.ConfigurationPSClient.InitializeFeature(String name, Hashtable settings)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<>c__DisplayClass3.<ConfigureFeature>b__0()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)
at System.Web.Mvc.Controller.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite" Guid="{1F742CC8-BDAA-56B6-A4B8-49F946D19CD1}" />
<EventID>103</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>65431</Task>
<Opcode>0</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2014-03-27T16:52:03.223741300Z" />
<EventRecordID>111</EventRecordID>
<Correlation />
<Execution ProcessID="8068" ThreadID="7680" />
<Channel>Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite/Operational</Channel>
<Computer>SERVER-PC.clinicalsystems.com</Computer>
<Security UserID="S-1-5-21-3021050346-1670805799-1320812125-500" />
</System>
<EventData>
<Data Name="exceptionInfo">System.Web.HttpException (0x80004005): Failed to configure databases and services: Object reference not set to an instance of an object. ---> System.Management.Automation.CmdletInvocationException: Object reference not set to an instance of an object. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.AddUserToGroup(GroupPrincipal group, UserPrincipal user)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureDefaultTrusts()
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureClaimSecurity(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureCore(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.FeatureConfigurer.Configure(Hashtable settings)
at Microsoft.WindowsAzure.Server.PowerShell.Common.BaseCmdlet.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.PSClient.RunCommand(Command command)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.ConfigurationPSClient.InitializeFeature(String name, Hashtable settings)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<>c__DisplayClass3.<ConfigureFeature>b__0()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)
at System.Web.Mvc.Controller.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar)</Data>
</EventData>
</Event>
Kori Francis Lead Software Developer Clinical Support Systems, Inc. -
500 Internal Server Error and formsweb.cfg ???
Hi
I have the following message when I call my form application :
500 Internal Server Error
Erreur de servlet de lapplication Forms.
Valeur absente ou non valide pour le paramètre baseHTML.
Vérifiez dans la configuration du servlet que cette valeur fait référence à un fichier valide.
URL:http://<host>:7778/forms/frmservlet?config=siam2
OS : Windows Server 2003
AS Oracle AS 10G v10.1.2.0.2
DEV : Forms 10G
Browser : IE7
All product are on the same machine database, infra, midtier
I use OEM Application server Control to configure my formsweb.cfg and registry.dat
When I just call http://<host>:7778/forms/frmservlet, It has installed jinitiator
If someone had the same problem, I would be happy to have an explanation to this problem
Thank in advance
ChristopheOk the problem is solved, it was about webutil, I had a problem of path and concerning jacob.jar in the configuration files default.env of midtier
If this can help someone
Christophe -
I installed FF Beta 4 and it gave me 500 Internal server error at launch. This stood true for any website typed. The Network LAN settings are kept at "auto-detect". So i decided to go back to FF 3.6.13 - but that too gave me the same error ! So i basically cannot use/surf using FF at all. I have kept "auto-detect" proxy in IE and Chrome and are working fine. Also, FF is my Fav and have been using it without any errors prior to IE beta 4 installation. Please help me get back to FF :)
To properly remove Genieo, see:
http://www.thesafemac.com/arg-genieo/
Do not use the uninstaller. It doesn't work. -
What does 500 internal server error mean and how do i fix it???
When I try and update my Producteev app it keeps telling me that I have a 500 internal server error! What does that mean and how do I fix it! I recently had to have my logic board replaced and my mac is only 3.5months old! I thought this thing wasn't suppose to be giving me problems like this!!! Please help!!!
500 errors in the HTTP cycle
Any client (e.g. your Web browser or our CheckUpDown robot) goes through the following cycle when it communicates with the Web server:
Obtain an IP address from the IP name of the site (the site URL without the leading 'http://'). This lookup (conversion of IP name to IP address) is provided by domain name servers (DNSs).
Open an IP socket connection to that IP address.
Write an HTTP data stream through that socket.
Receive an HTTP data stream back from the Web server in response. This data stream contains status codes whose values are determined by the HTTP protocol. Parse this data stream for status codes and other useful information.
This error occurs in the final step above when the client receives an HTTP status code that it recognises as '500'. Frank Vipond. September 2010.
Fixing 500 errors - general
This error can only be resolved by fixes to the Web server software. It is not a client-side problem. It is up to the operators of the Web server site to locate and analyse the logs which should give further information about the error.
Fixing 500 errors - CheckUpDown
Please contact us (email preferred) whenever you encounter 500 errors on your CheckUpDown account. We then have to liaise with your ISP and the vendor of the Web server software so they can trace the exact reason for the error. Correcting the error may require recoding program logic for the Web server software, which could take some time.
http://www.checkupdown.com/status/E500.html -
Error 500--Internal Server Error.PLEASE HELP .
hi,
I am using BEA weblogic server 9.0.i created a new domain named myproject.I have created directory mywebapp under applications dir.
i.e C:\bea\user_projects\domains\myproject\applications\mywebapp
I have placed my servlet class in :
C:\bea\user_projects\domains\myproject\applications\mywebapp\WEB-INF\classes\Mypackage
I deployed my apllication mywebapp using admin console.
when i run the program in the browser,i get this error:
Error 500--Internal Server Error
javax.servlet.ServletException: [HTTP:101249][weblogic.servlet.internal.WebAppServletContext@17e5fde - name: 'mywebapp', context-path: '/mywebapp']: Servlet class HelloServlet for servlet myHello could not be loaded because the requested class was not found in the classpath C:\bea\user_projects\domains\myproject\applications\mywebapp\WEB-INF\classes.
java.lang.ClassNotFoundException: HelloServlet.
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:497)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:234)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:2970)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1888)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1810)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1274)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:167)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:139)
what should i do?please help me.
byeyou are reason our error is slightly different is
Error 500--Internal Server Error
javax.servlet.ServletException: [HTTP:101249][ServletContext(id=21255917,name=BonusRoot,context-path=/BonusRoot)]: Servlet class Beans.BonusServlet for servlet BonusServlet could not be loaded because the requested class was not found in the classpath C:\bea\weblogic81\samples\domains\workshop\cgServer\.wlnotdelete\essai\war-ic.war.
java.lang.ClassNotFoundException: Beans.BonusServlet.
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:799)
at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:518)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:362)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
We have try with your proposition but we find the same error
we must request servlet??? because i've one
package Beans;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import javax.naming.*;
import javax.rmi.PortableRemoteObject;
public class BonusServlet extends HttpServlet {
CalcHome homecalc;
public void init(ServletConfig config) throws ServletException{
//Look up home interface
try {
InitialContext ctx = new InitialContext();
Object objref = ctx.lookup("calcs");
homecalc = (CalcHome)PortableRemoteObject.narrow(objref, CalcHome.class);
} catch (Exception NamingException) {
NamingException.printStackTrace();
public void doGet (HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException
String socsec = null;
int multiplier = 0;
double calc = 0.0;
PrintWriter out;
response.setContentType("text/html");
String title = "EJB Example";
out = response.getWriter();
out.println("<HTML><HEAD><TITLE>");
out.println(title);
out.println("</TITLE></HEAD><BODY>");
try{
Calc theCalculation;
//Retrieve Bonus and Social Security Information
String strMult =
request.getParameter("MULTIPLIER");
Integer integerMult = new Integer(strMult);
multiplier = integerMult.intValue();
socsec = request.getParameter("SOCSEC");
//Calculate bonus
double bonus = 100.00;
theCalculation = homecalc.create();
calc = theCalculation.calcBonus(multiplier, bonus);
}catch(Exception CreateException){
CreateException.printStackTrace();
//Display Data
out.println("<H1>Bonus Calculation</H1>");
out.println("<P>Soc Sec: " + socsec + "<P>");
out.println("<P>Multiplier: " + multiplier + "<P>");
out.println("<P>Bonus Amount: " + calc + "<P>");
out.println("</BODY></HTML>");
out.close();
public void destroy() {
System.out.println("Destroy");
}Help us please
Thanks -
500 Internal server error while running sqlsrv_query in PHP
Hello everyone I am having a problem with sqlsrv_query I will be grateful to you please provide some help.
I am running a query through php:
$ls_parcel_query = "select * from ParcelDetail order by ExtractDate";
$result = sqlsrv_query($conn, $ls_parcel_query, array(), array("Scrollable"=>"keyset","QueryTimeout"=>300));
$no_of_rows = sqlsrv_num_rows($result);
echo "<br/>".$no_of_rows;
It gives (After 30 seconds):
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
I have php.ini settings like below:
max_execution_time = 90
memory_limit = 128M
While running this query in SQL SERVER 2008 R2, it successfully gives result in some times in 1 minute and sometimes in 2 minutes.Hello,
A 500 Error will be caused due to many reason.To troubleshooting this issue, you can try to check out the error log and get more information on what is causing the error.
Reference :
"500 Internal Server Error" while running PHP
HTTP Error 500 Internal server for php pages and solution
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
500 internal server error while deploying a Web Dynpro application
Hi
I got the 500 internal server error while deploying the application to server.
I tried to find the log file at usr --> SAP --> SID --> JC XX --> j2EE --> Cluster --> Server 0 --> log, but no log was there.
There were structure changes in the RFC and also code change in my Web
Dynpro code.
I´m working on EP 7.
NWDS version is 7.0.1
Please help me as the production move is pending because of this.
Regards
Vineet VikramHi
Restarting the server does not help in my case.
I tried it several times.
I'm getting following error message in NWA>
Originated from: com.sapmarkets.bam.logcontroller.InvalidLogQuerySessionException: Invalid or expired log query session "1"
at com.sapmarkets.bam.logcontroller.jmx.LogControllerFacade.closeLogQuerySession(LogControllerFacade.java:356)
at sun.reflect.NativeMethodAccessorImpl.invoke0
Can you pl help on this.
Regards
Vineet Vikram
Maybe you are looking for
-
[SOLVED] SATA DVD-RW not in /dev (IRQ problem?)
I have an nForce550 Gigabyte M55S-S3 motherboard, with a SATA HD and a SATA DVD. I am able to use the HD, but somehow the DVD will not come up in /dev. Now the HD is present as /dev/sda. I have played around in the BIOS (as I had to disable some stuf
-
I keep my phone on EDGE the 3G is not working for me. The signal shows full strength and 3G but actually I can not place any call or receive any. The voice is distortion, hardly understand what the other person is saying. The provider is saying that
-
Troubleshooting of report delivery
Hi Experts, we would like to have some help with report troubleshooting. We have set up reporting and it works correctly for some reports/queries. Others generate a generic error when handed back to SCL. E.g. we can trace the request which is handed
-
IOS 8 reminders stuck with geofence
After updating to iOS 8 and creating one reminder with a geofence and then marking it done, the location services icon at the top of my iPhone 5 is now showing all the time (the outline icon). I've gone into Location Services and turned each item off
-
ITunes keeps freezing up and freezing my computer
I have a computer that runs on Vista. Everything was fine untill my brother decided to be kind and update iTunes for me while trying to help me get some music off my iPod and back into iTunes. THATS when the trouble started. iTunes now freezes up