5530: Trouble with connecting to laptop via blueto...

I have Nokia 5530 and laptop Toshiba A300.
I can pair laptop with Nokia E50 and 3230 and Sony Ericsson. There is Vista installed on Toshiba though it doesn`t want to pair with Nokia 5530.
Nokia 5530 can pair with PC with Windows XP installed and other mobile phones.
Laptop can find Nokia 5530 but when I try to connect one to another message "Service is not found" appears.
Changing of level of security in Bluetooth options did not help.

ftp doesn't work well in modern network environments, and the design of the protocol itself is basically incompatible with the inclusion of firewalls in modern networks. And it transmits the authentication credentials in cleartext.
Put another way, see if ssh and particularly sftp works here (either directly via the sftp command, or via a sftp GUI tool) works for your requirements.
Failing that, [here is ftp set-up information|http://labs.hoffmanlabs.com/node/942].
If it's the DNS set-up, then here is some [DNS server set-up information|http://labs.hoffmanlabs.com/node/1436]. And your Mac OS X client will need to have access to the same DNS information your server is using.

Similar Messages

I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after and extended period of time please help

I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after an extended period of time please help. Thanks!

I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after an extended period of time please help. Thanks!

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

Trouble with connecting my photosmart plus b209a

trouble with connecting my photosmart plus b209a ........it was conncected to my network until today i was messing around with it and reset the network default by accident, and now i am trying to connect the printer to my router and it says it doesnt see any connection and ive tried reseting the router bunch of times, and then for a brief minute it said it was connected to ssid hpsetup? and communication mode adhoc?.. not really sure what that was so i reset the network on the printer again back to default and i dont really know what to do it just says no connection found, does anyone have an idea of what i should do and whats wrong

Hi joey12293,
I am linking a document that has very good information about how to install the printer to the network. Click Here See if this helps. Let me know how it goes.
Good Luck !
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

Having trouble with connectivity, no internet connection away from home

Having trouble with connectivity, no internet connection away from home, can't check Facebook, weather, scores.......

if you don't have a dataplan and rely on wifi for internet that is how it works
if you do have a dataplan it sounds like it's not set up correctly in which case you should contact your carrier

Can only connect one laptop via AEBS wifi

i was able to use my internet service with my Apple Airport Express Base Station (AEBS) for months without any problem and it was capable of simultaneous internet sharing (via wifi) among 3 laptops without the need to enter / directed to the internet provider's portal per connection (to enter account number and service reference number for authorization - works like a username and password for the connection)
not until their so-called "network upgrade" as stated by my internet provider's tech support - I am now only able to connect a single laptop via the AEBS
attempting to connect the other 2 laptops simultaneously with the 1 laptop on wifi connection was unsuccessful
can not connect more than one laptop to my internet service through the AEBS simultaneously
and whenever one laptop tries to connect to my internet service provider (via AEBS), you are immediately directed to the internet service provider's portal to enter your Account Number and Service Ref Number - you have to go through this every time you want to connect
i have already reset the settings of the AEBS and still, the problem persisted
any ideas on how to resolve this issue? is the problem with my internet service provider or my AEBS?
thanks in advance

Sounds like they've done something to stop more than one computer sharing the internet connection. It's possible that they've done this to prevent unauthorised access (by neighbours, etc.), but it's also possible that they've done it to stop people sharing one account - an attempt to get more customers to pay extra?
I'd be tempted to look for a new ISP if they can't help.

Trouble with connecting to an App and restoring In App Purchases

I am having trouble with restoring my in app purchases. I had purchased the full season for crazy night out a while back but when I got the app again after restoring the app the full season wasn't on and it is trying to charge me for it. I had also bought the fantasy date app and the multipacks and unlike crazy night out it recognizes I made the purchase but when I click restore purchases or buy pack it won't download and it says can not connect to server and for me to check my settings and try again also for the ones I do have that were free when I click play or download all videos it says it can't connect to servers and the videos don't play. Is there anything I can do to retrieve these purchases back and get the videos to play.
It's not the Internet everything else works.

ftp doesn't work well in modern network environments, and the design of the protocol itself is basically incompatible with the inclusion of firewalls in modern networks. And it transmits the authentication credentials in cleartext.
Put another way, see if ssh and particularly sftp works here (either directly via the sftp command, or via a sftp GUI tool) works for your requirements.
Failing that, [here is ftp set-up information|http://labs.hoffmanlabs.com/node/942].
If it's the DNS set-up, then here is some [DNS server set-up information|http://labs.hoffmanlabs.com/node/1436]. And your Mac OS X client will need to have access to the same DNS information your server is using.

Basic problem with connecting to disk via Airport Extreme - No Disks Found

I've a Lacie BigDisk (500GB) which connects fine via USB or firewire directly to my Macs (HFS). When I plug it into the AirPort Extreme, the Airport Utility shows the disk as connected, and I've ticked File Sharing, with "Secure Shared Disks" set to "With base station password".
The AirPort Disk Utility is set to Automatically Discover AirPort disks and to Show AirPort Disks in the menu bar. It sees the Airport Extreme, and the action is set to "Connect with Password".
When I close the AirPort Disk Utility I can see the disk icon in the top menu bar, and clicking on this provides a menu with (greyed out) "No Disks Found", and the option to "Open Airport Disk Utility..."
Any ideas - it's driving me mad!
Thanks
Andrew

I am having the same problem with a Lacie 320 GB HD as well with my AEBS. I can't get it to stay recognized in Leopard. I have gotten it to work but only for 10 minutes then I have to unplug and start over. I know that it works fine in Tiger but I am having troubles with my drive "disappearing" with Leopard. From what I can tell others have had this problem but I am not finding a solution. Some have said going back to 7.1.1 works however my AEBS is 2 months old and the oldest firmware it has in the airport utility is 7.2. I have also found old versions on the apple website most look for an intel chipset which I do not have I am running a powerbook G4, also my friend on a new MacbookPro couldn't get them to work at all. Air disk is an amazing concept when am I going to be able to use it?

Are people still having trouble with iPhone/HP Laptops?

Since I've had my Envy I've had no end of trouble with getting it and the iPhone to play nice. Any my search continues. So far, I have updated every bios, reinstalled Windows 7/iTunes many times, have restored the iPhone far more times than I care to remember and I am STILL having troubles with this thing. Having got through the Syncing issues with the PM55 chipset and iPhone I can now sync with my laptop. However all is not well as it would seem that I cannot sync my photo's. It doesn't matter if I have 0gb, 15gb or 30gb free, iTunes is telling me that there is not enough memory available. This error seems like an old one and there is even some info in the Apple KB but after following all that I still can't get it to sync my photo's.
Some info on my setup:
HP Envy 15 (all the latest drivers installed, bios F.24) Core i7-820, 8gb ram etc.
iPhone 32gb, ver 3.1.3
iTunes (whatever the latest one is)
I should add that I can sync my iPhone with an identical install of intunes on my vintage Quad core desktop PC, but as I use my Laptop a lot more (and have all my media, email, and contacts etc on it) I would prefer to sync to it.
Is there anything that I can do? Its very frustrating to have blown $4k on this equipment and it doesn't work...

Well I tried deleting the photocache but alas, no luck. I also tried syncing with just the photo's enabled, and it worked! So then I enabled my other media and that copied across too! I thought I was on a bit of a roll here, but now whenever I try and sync it will do one of 3 things:
iTunes will crash.
iTunes will indicate that there is not enough memory on the device (+9GB free)
iTunes will remove the iPhone from the sidebar (and my computer/disk management) even though it will continue to charge.
Interesting point to note is that it works fine (cable/iphone/itunes/media library) on my desktop and macbook. Still really disappointed that I cannot get these two to cooperate. Also still haven't got any contacts from outlook but that may not be related?

Trouble with connection to Airpot Express on new Macbook

Hello my fellow Apple users! I hope one of you can help me. I purchased a new Macbook last week and I love it except I'm having trouble with the connection to my Airport Express. I originally set up the Airport on my old iMac, which is located on the 2nd floor of my house. The Airport is plugged in to the modem on the 1st floor. Since I have a new Macbook, I boxed up the old iMac and put it in a closet on the 2nd floor because I'm not using it anymore.
The weird thing is that my wifi connection works just fine on the 2nd floor but can't find a connection on the 1st floor; where the Airport is plugged in.
So I'm thinking I need to uninstall the Airport on my iMac but I don't know how to do that. Any tips?

V Rodriguez wrote:
I'm having trouble with the connection to my Airport Express. I originally set up the Airport on my old iMac, which is located on the 2nd floor of my house. The Airport is plugged in to the modem on the 1st floor. Since I have a new Macbook, I boxed up the old iMac and put it in a closet on the 2nd floor because I'm not using it anymore.
The weird thing is that my wifi connection works just fine on the 2nd floor but can't find a connection on the 1st floor; where the Airport is plugged in.
So I'm thinking I need to uninstall the Airport on my iMac but I don't know how to do that.
Welcome to Apple's discussion groups.
Once an Apple AirPort base station is configured it retains no history of the computer that originally configured it. So "uninstalling the AirPort on your iMac" would not accomplish anything useful, even if you could do something that could be described that way.
How is your AirPort Express connected? Is its Ethernet port connected to a broadband modem?

I have a MacBookPro, an iPad and an iMac using a wifi connection with an airport extreme base station. Lately I am having trouble with connection time outs. Right now the laptop and ipad are connected okay but the iMac has timed out and I can't reconnect

Please help. Just the last week or so (maybe since Apple released a new software update for my Airport, I keep getting kicked off the net and can't reconnect - it doesn't even show my wifi network in the list of available networks. I am considering resetting the airport as detailed in the manual. If I do this will it act as a new one and can I set it up as from the beginning. My Mac is running OSX 10.6.8 and if I try to use the airport setup assistant it tells me i can't use this version of the app with the version of my OS (because I have upgraded my OS ) I assume
I get a message saying my network requires a WPA password and when I put it in it says connection timeout - meanwhile here I am on my laptop and connecting okay to the net that way - so strange.
If I connect directly to the computer I have a good connection so it is not my ISP
I am 64 and a woman and I thought I was reasonably savvy having had Macs since 1992. This has me stumped and I really would like some advice - otherwise I think I'll just go iout andf buy a new airport.
And just so you know . . . I have a smart TV and it is connecting to the net okay!

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

No picture on TV/DVD combo when connected to laptop via HDMI

I have. 2008 19LV50KW TV/DVD combo that I'm trying to use as a second monitor for my new laptop. I have it connected via HDMI port, and the laptop recognizes the Toshiba, I have windows 7 and have dual monitors enabled, yet there is only Black on the Toshiba TV (I have it on the HDMI input selection). What could be the issue ?

I've seen a number of similar posts around the internet. I have this same Toshiba TV, and my new fire TV stick from amazon will not display via the HDMI (the only option). So then I tried my laptop, and discovered that it too would NOT display.
Based on that troubleshooting, I've concluded that it much be an issue with the TV. Can this be remedied in any way? Both my fire TV stick and my laptop work on all of my other TVs. There seems to clearly be an issue with the HDMI input with this Toshiba model, and maybe more.
Please advise.

Trouble with sending huge arrays via DataSockets.

Hi,
I am having trouble sending huge arrays via Data Sockets from my main vi on the server PC to the vi on the client PC.
To further elaborate, in my main vi program I have created 3 arrays called Array1, Array2 and Array3 on my front Panel. By right clicking the mouse on each set of array and from the pop-up menu I selected Data Operations-> DataSocket Connection and I entered dstp://localhost/Array1 and clicked on Publish to broadcast the data from Array1. Similarly, I did the same for Array2 and Array3.
Now, in my client vi program I have created three arrays on my front Panel to read (Subscribe) the data from the three arrays broadcasted via DataSockets from the server’s main vi program. To subsc
ribe the data I did the similar process above and clicked on Subscribe to read the data (of course the IP address of the client PC will be different then the server PC so enter the hosts IP address). Once the data is received in the client arrays, I am using LV2 globals so that I can use these arrays on other sub-vi’s locally (instead of having each sub-vi get data from the server directly).
I succeeded in doing this with two arrays, however when I added the third array the DataSockets would not work consistently. For example the refresh rate would get slower at times and sometimes 2 out of the 3 arrays would update. I don’t know if I have exceeded the limit on how much data DataSockets can broadcast, but I need to have some mechanism to broadcast 6 arrays (approx. 10000 elements for each array) of double digits precision.
Has anyone come across this issue? Is there another way of broadcasting data more efficiently then DataSockets?
I would appreciate any
help that I can get.
I have attached the files for this program in the zip file.
First run the Server main program, testServeMainVI.vi, and then the client program, testClientMainVI.vi.
Thanks
Nish
Attachments:
beta2.zip ‏70 KB

DataSocket can be a lossy communication. I like the advice to flatten the data to a string, but another option would be to buffer the communcation. The problem might be that the data is being overwritten on the server faster than it is being read. There is an example of buffered datasocket on NI web page: http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_guid=BA3F9DFED17F62C3E034080020E74861&p_node=DZ52000_US&p_submitted=N&p_rank=&p_answer=&p_source=Internal
Also, I have played with the new built in buffered datasocket in LabVIEW 7.0. It is pretty slick. If buffers the data both on the server and the client side.

HP Officejet Pro 8610 does not connect to laptop via wireless network

I have a new HP Officejet Pro 8610. It is connected wirelessly to my home network. My laptop, running Windows 7, is connected to the same network, but cannot find the printer. I have tried turning everything off and resetting the router, but still have the same issue - my laptop cannot find the printer.
I am able to email a document from my laptop to the printer using the printer's email address.
What can I do to get my laptop to find the printer on the wireless network?

Hey!
This is an issue with your wireless, you either have to get your router looked at you are looking at relocating your printer and your router so they are closer together. If you are able to connect all of your devices to the network fine when you are in the same room; Call HP Technical Phone Support.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
I hope this helps.
I worked for HP.

Sharing Internet with a windows laptop via ethernet on airport express base

Hi
I have a Linksys wireless router which is connected to my G5 Imac, I also have an airport express base station. My wife's laptop does not have a wireless card. Can I plug an ethernet cable into the Airport Express base station and get the laptop connected. What is the best way to configure all this. Help will be much appreciated.
K.

you have 2 choices. Actually three but i would use choice 1.
1. Set-up the Airport station using DHCP to assign addresses dynamically to connected (or wireless users). The computers must be set to DHCP.
2. Set-up using Manual IP assignment.....uhm you have to do it manually. Your laptops must be manually assigned IP address via thier network control panels.
3. The linksys router should do all of the above, but using the Apple software to do the above is easier using set-up assistant.
IMPORTANT: Make sure you do not have both wireless devices trying to do the same thing at the same time!!
One must be set-up as a dumb router/hub.(see your instructions)
Hope that helps.
Once you are set-up, In order for a PC to sign in, on the Apple base station you have to click on "Password" in the Airport software and have it reveal the "HEX equivalent password (WEP key)" for PC. Your wife would enter this in her PC connection gui.
Hope this helps
Norbert

5530: Trouble with connecting to laptop via blueto...

Similar Messages

Maybe you are looking for