6120 and Parrot CK3000 Bluetooth

I have a Mitsubishi L300 Van with Factory fitted Bluetooth.
Parrot CK3000.
I was using a 6230I and the Bluetooth worked exceptional. On upgrading to a new 6120 i can connect but the volume i receive is very poor
I have asked Mitsubishi for help and they say they cant
Now i have been told its the Phones Firmware thats wrong
Can someone tell me how to fix this matter

Hi all, I have a N95 8Gb and have exactly the same problem.
I have tried everything, so believe me when I say the problem lies with the Nokia software.
I have an X3 with Parrot CK3000 handsfree kit and the phones pairs up fine but the volume is too low to be heard and cannot be adjusted in any way.
I tried installing other Parrots units (2 other models)but to no avail.
I have updated the firmware from 10.0.21 to 11.0.026 but no results.Software updater says software is running latest version.
I have tried quite a few other makes of phones and they work perfectly! So I can now narrow it down to the Nokia software.
I have reset,re-paired and done everything with no results.
This is the 4th discussion forum I am joining to get some help.
I am going to try take the phone in to a Nokia center to see if they are any help.
If there is anyone out there who can help, please it will be greatly appreciated.
Any Nokia people who care to step in and offer assistance would also be greatly appreciated, as I cannot think of any other way forward.
REgards,

Similar Messages

E51, Garmin xt and Parrot CK3000 vs Clarion BLT373

When I had connected E51 to Parrot CK3000 I could hear all telephone activity through car speakers -telephone mute was active not only during call but also during pushing any key and i could hear beep from speakers. This was not too convinient but acceptable. With this connection I could hear navigation messages (Garmin XT) from telephone speaker.
I have changed car radio to Clarion and installed clarion bluetooth BLT373. With this device telephone mute is active only during call (not during dialing number or pushing any key). This is OK. But I cannot hear any navigation message nor from telephone speaker nor from radio speakers.
Does anyone know the solution of this problem.

N80 and Parrot CK3000 Evolution BT carkit

I have an N80 and above Parrot car kit, both with the latest firmware. However, the phone doesn't auto connect to the car kit with Bluetooth switched on (despite selecting this option when pairing).

Pick an unused profile and turn everything off in that profile except for what you do want.
This includes keypad tones etc.
I have everything off except for call and message. Calls are set at 2 beeps and messages at 1 beep.
Vibrator, breathing light, keypad tones, video calls, warning tones, etc are all set to off.
I renamed this profile (I used the "pager" profile) to "Car"
Under Menu > Tools > Settings > General > Enhancement set the "Headset" to use the profile you just configured for this purpose.
I have tried the "Wireless Car Kit" but found that it mine actually uses "headset" so I have set that as the default with my "Car" setting.

E71 and Parrot CK3000 Evolution volume levels

I can connect my E71 to my Parrot Car Kit but every time I do so it sets the volume to the minimum. Is this a common problem? Are Nokia/Parrot working on a solution for this problem? Has anybody else encountered this problem? And if so, is there a solution that doesn't involve me having to reset the volume to an acceptable level every time I connect my phone to the car kit?

Pick an unused profile and turn everything off in that profile except for what you do want.
This includes keypad tones etc.
I have everything off except for call and message. Calls are set at 2 beeps and messages at 1 beep.
Vibrator, breathing light, keypad tones, video calls, warning tones, etc are all set to off.
I renamed this profile (I used the "pager" profile) to "Car"
Under Menu > Tools > Settings > General > Enhancement set the "Headset" to use the profile you just configured for this purpose.
I have tried the "Wireless Car Kit" but found that it mine actually uses "headset" so I have set that as the default with my "Car" setting.

IPhone 3G with Parrot CK3000 Evolution

I ordered a Parrot CK3000 for my Saab the other day. It should be here Monday so I can install it. I have read though that I cannot sync my iPhone's contacts to it to be able to use the voice dialing and stuff. It's not the end of the world, I don't mind selecting a contact from the phone, I'm just wondering if it's something that Parrot and Apple might support in the future. I know Parrot just came out with some iPhone/iPod-specific devices, but they are out of my price range. Thanks in advance for any help!

Hello,
Such an option is not available on the iPhone. Whether it will become available in the near future is not known. The fact is, that enabling iPhone to properly connect to other deviced via bluetooth is feasible, although it would take some rewrighting of iPhone's bluetooth support in general. That's the main reason I have recently put up [this|http://pleasefixtheiphone.com/problems/view/6330> ticket in an iPhone site.

Parrot CK3000

Well, I installed a Parrot CK3000 in my bosses car today and discovered later that the iPhone is no longer listed as a supported phone on the Parrot support page for the CK3000...
I'm guessing this is because downloading the contacts from the iPhone doesn't work.
Oh well, My Boss likes it anyway.
I on the other hand, I now know that the best choice for My car will be the CK3100.
Apparently form other posts I have read, it can download the contacts.

I just purchased an iPhone (w/ V1.1.1 SW) and I have a Parrot CK3000 Evolution car-kit (w/ V5.10c firmware)
It will discover the kit fine and pair, but when I reenter the car later it seems very unreliable in repairing. One time it did pair several minutes after entering the car, and the other time it did not seem to connect - but did when I unpaired and repaired (reentered PIN).
Anyone finding any tricks to make this work better? I just got off the phone with Apple support to no avail (could not find any info on it). I've also sent a note to Parrot support....

Sychronising N90 with Parrot CK310 bluetooth hands...

I have rcently fitted a Parrot CK3100 bluetooth hands free kit but cannot sychronise my contacts list with it.
I have been trying to use Data Transfer but it starts to transfer the application and says follow the instructions on the creen but never gets any further.
Can anybody advise whether it is me or give further instructions?
Trevor

I hope they (parrot) can make photos sync with a new firmware update. Current 3200LS version 2.11b or 2.11_c was updated to handle iPhone sync - I wonder if they gave photos any thought?

Keynote and photos via bluetooth

A couple of questions regarding Keynote for iPad and photos:
Any way to take a photo from a non-iPhone and have it bluetooth to the ipad so I can use the photo in a keynote presentation?
Better yet, any way to have keynote grab a bluetooth photo automatically and place it in the right slide vs. bluetoothing in to photos area and then me moving it physically?
thanks forum members!

Thanks, yes email is an option, but in a non-wifi area for people not using 3G, how can we auto-magically get the photo bluetoothed to the iPad for use in Keynote?
Android phone to iPad via bluetooth is the basic question
Second part is the magic of having Keynote "grab" the photo and place automatically

I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to

I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to pick one or the other, is there a way to have both?

I asked same question
Any answers

I have recently upgraded my iBookG4 from Tiger to Leopard 10.5.8 and find my Bluetooth USB adaptor no longer connects. The Bluetooth pane says inactive. Does Leopard require USB 2.0. I've had the adaptor for some time so may be USB 1.0

I have recently upgraded my iBookG4 from Tiger to Leopard 10.5.8 and find my Bluetooth USB adaptor no longer connects. The Bluetooth pane says inactive. Does Leopard require USB 2.0. I've had the adaptor for some time so may be USB 1.0

Bluetooth icon on menu bar shows bluetooth off. When opening bluetooth preferences it shows the devices I've connected previously,( my mobile phone), and other devices I've attempted to connect but not very successfully: my iPhone and MiniMac. The bluetooth dongle in the USB port shows a continual blue light but does not react and the iBook does not recognise that it is there. There is absolutely no reaction when I try to pair my mobile phone, which I've done successfully before upgrading to Leopard, either by the iBook or the mobile phone.
I assumed that Tiger was not bluetooth compatible with the iPhone or MacMini running SnowLeopard and hoped by upgrading to Leopard I could achieve some file transfers between the three devices (iBook, iPhone and MacMini)

I upgraded my iPhone 4 to ios 5.1 and it broke bluetooth

I upgraded my iPhone 4 to ios 5.1 and it broke bluetooth with my Altec in-motion bluetooth speaker. I now have to "Forget the Device" and re-pair them each time I want to use the iPhone with that speaker. This always seems to work, but it takes way too long to be feasible as a long term solution. Occasionally if I don't "Forget the Device" the iPhone Bluetooth settings will show "Connected" to the Device, but no audio comes out of the speaker even though Music on the iPhone appears to be playing as it normally would if there really were a Bluetooth connection to the speaker. When that happens, I have to once again "Forget this Device" and start over again.

The iOS5 upgrade has made a mess of the bluetooth connectivity. iPhone4 was paired perfectly to 2012 VW GTI and played all playlists fine. After upgrade, can see the song, see the timer counting down as if it is playing, but no sound. AND iPhone 4s paired paired with 2008 BMW handsfree telephone before the update, now I can't use the phone in the car. WHAT GIVES??? Anyone with ideas out there???

How to connect Iphone4s and Ipad2 through bluetooth

How to connect Iphone 4s and Ipad2 through bluetooth normally as we do for some general phone

you can only connect your iPhone 4S and iPad2 for the purpose of tethering your iPhone's internet connection to the iPad. Any other connection is not supported.

HT1766 When I go to settings on my iPhone 5 and hit the "bluetooth" tab, The circular icon next to "Devices" is constantly "spinning", and now my phone will not connect to the bluetooth in my car, etc. Does anyone know how to fix this?

when I go to "settings" on my iPhone 5 and hit the "Bluetooth" tab, the circular icon next to "Devices" is constantly spinning, ans now I can't get the phone to sync with the bluetooth in my car, etc.
Any ideas on how I can correct this?

unpair your phone from your car, then do a re-pair.

I cannot connect my I pad mini and iPhone using Bluetooth.

I cannot connect my I pad mini and iPhone using Bluetooth.

I'm not sure what made you think that that was not what Regal trail was asking... I am having the same problem and wish that that question had been answered! I believe I've gone through the same steps that used to work, to no avail now. But I'm betting that you (Chris) have the answer to this!
In a nutshell: I'm trying to share my iPhone's cellular connection with my WiFi-only iPad Mini, using a Bluetooth connection. I used to do this regularly, but went for a period of time without the need for it, and so am hard pressed now to identify which thing that might have changed during the interim would have made it no longer work.
iPhone is connected to internet via cellular data (AT&T LTE). Bluetooth is on. Personal Hotspot is on.
On iPad, Bluetooth is on. My iPhone shows up in the list under My Devices, and I can select it, and it will connect for approximately 5 seconds. The shared connection icon shows up on the iPad. The iPhone (on the Bluetooth screen) shows, for those 5 seconds, that the iPad is connected, but the shared connection status bar never shows up on the iPhone.
After 5 seconds, it disconnects.
Thoughts? Need more info? Let me know! Thanks.

Why my wi-fi is not working, and it says bluetooth is not working too??

Why my wi-fi is not working, and it says bluetooth is not working too??
My bluetooth n wi-fi are both unavailable! i had already restore my device, but it still doesn't work!!
My name is juniper, i am from Taiwan! Any know what's wrong with this piece of XXXX!!?? Help me plzzzz!!

Hi ,
I am a specialist in Computer and Information Systems e. I am 40 years old from Egypt
I have Iphone 3g 8g and my SN 868391XZY7H
Tunes update killing my Iphone software , 3 days my Iphone not working Although I am go to download 100% update and my iphone installed all a software update but I don’t know what happened why my Iphone not working ?
now some one help me and he installed software for my iphone and it is working but Wi-Fi and Bluetooth not working
I need help me because Tunes update from killing my Iphone ??.
i want my old Iphone software please
thank you somuch
[email protected]

6120 and Parrot CK3000 Bluetooth

Similar Messages

Maybe you are looking for